qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Deepak Gupta <debug@rivosinc.com>
To: qemu-riscv@nongnu.org, qemu-devel@nongnu.org
Cc: palmer@dabbelt.com, Alistair.Francis@wdc.com, bmeng.cn@gmail.com,
	liwei1518@gmail.com, dbarboza@ventanamicro.com,
	zhiwei_liu@linux.alibaba.com, jim.shu@sifive.com,
	andy.chiu@sifive.com, kito.cheng@sifive.com,
	Deepak Gupta <debug@rivosinc.com>,
	Richard Henderson <richard.henderson@linaro.org>
Subject: [PATCH v14 04/20] target/riscv: save and restore elp state on priv transitions
Date: Thu, 12 Sep 2024 16:53:04 -0700	[thread overview]
Message-ID: <20240912235320.3768582-5-debug@rivosinc.com> (raw)
In-Reply-To: <20240912235320.3768582-1-debug@rivosinc.com>

elp state is recorded in *status on trap entry (less privilege to higher
privilege) and restored in elp from *status on trap exit (higher to less
privilege).

Additionally this patch introduces a forward cfi helper function to
determine if current privilege has forward cfi is enabled or not based on
*envcfg (for U, VU, S, VU, HS) or mseccfg csr (for M).

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/riscv/cpu.h        |  1 +
 target/riscv/cpu_helper.c | 54 +++++++++++++++++++++++++++++++++++++++
 target/riscv/op_helper.c  | 17 ++++++++++++
 3 files changed, 72 insertions(+)

diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index e9f26b5121..6c5e199e72 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -547,6 +547,7 @@ void riscv_cpu_set_geilen(CPURISCVState *env, target_ulong geilen);
 bool riscv_cpu_vector_enabled(CPURISCVState *env);
 void riscv_cpu_set_virt_enabled(CPURISCVState *env, bool enable);
 int riscv_env_mmu_index(CPURISCVState *env, bool ifetch);
+bool cpu_get_fcfien(CPURISCVState *env);
 G_NORETURN void  riscv_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
                                                MMUAccessType access_type,
                                                int mmu_idx, uintptr_t retaddr);
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index a935377b4a..d7b776c556 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -33,6 +33,7 @@
 #include "cpu_bits.h"
 #include "debug.h"
 #include "tcg/oversized-guest.h"
+#include "pmp.h"
 
 int riscv_env_mmu_index(CPURISCVState *env, bool ifetch)
 {
@@ -63,6 +64,33 @@ int riscv_env_mmu_index(CPURISCVState *env, bool ifetch)
 #endif
 }
 
+bool cpu_get_fcfien(CPURISCVState *env)
+{
+    /* no cfi extension, return false */
+    if (!env_archcpu(env)->cfg.ext_zicfilp) {
+        return false;
+    }
+
+    switch (env->priv) {
+    case PRV_U:
+        if (riscv_has_ext(env, RVS)) {
+            return env->senvcfg & SENVCFG_LPE;
+        }
+        return env->menvcfg & MENVCFG_LPE;
+#ifndef CONFIG_USER_ONLY
+    case PRV_S:
+        if (env->virt_enabled) {
+            return env->henvcfg & HENVCFG_LPE;
+        }
+        return env->menvcfg & MENVCFG_LPE;
+    case PRV_M:
+        return env->mseccfg & MSECCFG_MLPE;
+#endif
+    default:
+        g_assert_not_reached();
+    }
+}
+
 void cpu_get_tb_cpu_state(CPURISCVState *env, vaddr *pc,
                           uint64_t *cs_base, uint32_t *pflags)
 {
@@ -546,6 +574,15 @@ void riscv_cpu_swap_hypervisor_regs(CPURISCVState *env)
     }
     bool current_virt = env->virt_enabled;
 
+    /*
+     * If zicfilp extension available and henvcfg.LPE = 1,
+     * then apply SPELP mask on mstatus
+     */
+    if (env_archcpu(env)->cfg.ext_zicfilp &&
+        get_field(env->henvcfg, HENVCFG_LPE)) {
+        mstatus_mask |= SSTATUS_SPELP;
+    }
+
     g_assert(riscv_has_ext(env, RVH));
 
     if (current_virt) {
@@ -1760,6 +1797,11 @@ void riscv_cpu_do_interrupt(CPUState *cs)
     if (env->priv <= PRV_S && cause < 64 &&
         (((deleg >> cause) & 1) || s_injected || vs_injected)) {
         /* handle the trap in S-mode */
+        /* save elp status */
+        if (cpu_get_fcfien(env)) {
+            env->mstatus = set_field(env->mstatus, MSTATUS_SPELP, env->elp);
+        }
+
         if (riscv_has_ext(env, RVH)) {
             uint64_t hdeleg = async ? env->hideleg : env->hedeleg;
 
@@ -1808,6 +1850,11 @@ void riscv_cpu_do_interrupt(CPUState *cs)
         riscv_cpu_set_mode(env, PRV_S, virt);
     } else {
         /* handle the trap in M-mode */
+        /* save elp status */
+        if (cpu_get_fcfien(env)) {
+            env->mstatus = set_field(env->mstatus, MSTATUS_MPELP, env->elp);
+        }
+
         if (riscv_has_ext(env, RVH)) {
             if (env->virt_enabled) {
                 riscv_cpu_swap_hypervisor_regs(env);
@@ -1839,6 +1886,13 @@ void riscv_cpu_do_interrupt(CPUState *cs)
         riscv_cpu_set_mode(env, PRV_M, virt);
     }
 
+    /*
+     * Interrupt/exception/trap delivery is asynchronous event and as per
+     * zicfilp spec CPU should clear up the ELP state. No harm in clearing
+     * unconditionally.
+     */
+    env->elp = false;
+
     /*
      * NOTE: it is not necessary to yield load reservations here. It is only
      * necessary for an SC from "another hart" to cause a load reservation
diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c
index 25a5263573..eddedacf4b 100644
--- a/target/riscv/op_helper.c
+++ b/target/riscv/op_helper.c
@@ -309,6 +309,15 @@ target_ulong helper_sret(CPURISCVState *env)
 
     riscv_cpu_set_mode(env, prev_priv, prev_virt);
 
+    /*
+     * If forward cfi enabled for new priv, restore elp status
+     * and clear spelp in mstatus
+     */
+    if (cpu_get_fcfien(env)) {
+        env->elp = get_field(env->mstatus, MSTATUS_SPELP);
+    }
+    env->mstatus = set_field(env->mstatus, MSTATUS_SPELP, 0);
+
     return retpc;
 }
 
@@ -349,6 +358,14 @@ target_ulong helper_mret(CPURISCVState *env)
     }
 
     riscv_cpu_set_mode(env, prev_priv, prev_virt);
+    /*
+     * If forward cfi enabled for new priv, restore elp status
+     * and clear mpelp in mstatus
+     */
+    if (cpu_get_fcfien(env)) {
+        env->elp = get_field(env->mstatus, MSTATUS_MPELP);
+    }
+    env->mstatus = set_field(env->mstatus, MSTATUS_MPELP, 0);
 
     return retpc;
 }
-- 
2.45.0



  parent reply	other threads:[~2024-09-12 23:56 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-12 23:53 [PATCH v14 00/20] riscv support for control flow integrity extensions Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 01/20] target/riscv: expose *envcfg csr and priv to qemu-user as well Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 02/20] target/riscv: Add zicfilp extension Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 03/20] target/riscv: Introduce elp state and enabling controls for zicfilp Deepak Gupta
2024-09-12 23:53 ` Deepak Gupta [this message]
2024-09-12 23:53 ` [PATCH v14 05/20] target/riscv: additional code information for sw check Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 06/20] target/riscv: tracking indirect branches (fcfi) for zicfilp Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 07/20] target/riscv: zicfilp `lpad` impl and branch tracking Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 08/20] disas/riscv: enable `lpad` disassembly Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 09/20] target/riscv: Expose zicfilp extension as a cpu property Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 10/20] target/riscv: Add zicfiss extension Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 11/20] target/riscv: introduce ssp and enabling controls for zicfiss Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 12/20] target/riscv: tb flag for shadow stack instructions Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 13/20] target/riscv: mmu changes for zicfiss shadow stack protection Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 14/20] target/riscv: AMO operations always raise store/AMO fault Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 15/20] target/riscv: update `decode_save_opc` to store extra word2 Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 16/20] target/riscv: implement zicfiss instructions Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 17/20] target/riscv: compressed encodings for sspush and sspopchk Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 18/20] disas/riscv: enable disassembly for zicfiss instructions Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 19/20] disas/riscv: enable disassembly for compressed sspush/sspopchk Deepak Gupta
2024-09-12 23:53 ` [PATCH v14 20/20] target/riscv: Expose zicfiss extension as a cpu property Deepak Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240912235320.3768582-5-debug@rivosinc.com \
    --to=debug@rivosinc.com \
    --cc=Alistair.Francis@wdc.com \
    --cc=andy.chiu@sifive.com \
    --cc=bmeng.cn@gmail.com \
    --cc=dbarboza@ventanamicro.com \
    --cc=jim.shu@sifive.com \
    --cc=kito.cheng@sifive.com \
    --cc=liwei1518@gmail.com \
    --cc=palmer@dabbelt.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=zhiwei_liu@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).