* [PATCH v2 1/5] hw/resettable: Add SOFT reset type
2024-10-16 21:24 [PATCH v2 0/5] Consolidate lan9118 phy implementations Bernhard Beschow
@ 2024-10-16 21:24 ` Bernhard Beschow
2024-10-17 9:31 ` Peter Maydell
2024-10-16 21:24 ` [PATCH v2 2/5] hw/net/lan9118: Extract lan9118_phy Bernhard Beschow
` (3 subsequent siblings)
4 siblings, 1 reply; 7+ messages in thread
From: Bernhard Beschow @ 2024-10-16 21:24 UTC (permalink / raw)
To: qemu-devel
Cc: Jason Wang, qemu-arm, Peter Maydell, Guenter Roeck, Paolo Bonzini,
Bernhard Beschow
This is a preparation for the next patch.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
include/hw/resettable.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/hw/resettable.h b/include/hw/resettable.h
index fd862f1e9f..0f25beaf21 100644
--- a/include/hw/resettable.h
+++ b/include/hw/resettable.h
@@ -40,6 +40,7 @@ typedef enum ResetType {
RESET_TYPE_WAKEUP,
RESET_TYPE_S390_CPU_INITIAL,
RESET_TYPE_S390_CPU_NORMAL,
+ RESET_TYPE_SOFT,
} ResetType;
/*
--
2.47.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v2 1/5] hw/resettable: Add SOFT reset type
2024-10-16 21:24 ` [PATCH v2 1/5] hw/resettable: Add SOFT reset type Bernhard Beschow
@ 2024-10-17 9:31 ` Peter Maydell
0 siblings, 0 replies; 7+ messages in thread
From: Peter Maydell @ 2024-10-17 9:31 UTC (permalink / raw)
To: Bernhard Beschow
Cc: qemu-devel, Jason Wang, qemu-arm, Guenter Roeck, Paolo Bonzini
On Wed, 16 Oct 2024 at 22:24, Bernhard Beschow <shentey@gmail.com> wrote:
>
> This is a preparation for the next patch.
>
> Signed-off-by: Bernhard Beschow <shentey@gmail.com>
> ---
> include/hw/resettable.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/hw/resettable.h b/include/hw/resettable.h
> index fd862f1e9f..0f25beaf21 100644
> --- a/include/hw/resettable.h
> +++ b/include/hw/resettable.h
> @@ -40,6 +40,7 @@ typedef enum ResetType {
> RESET_TYPE_WAKEUP,
> RESET_TYPE_S390_CPU_INITIAL,
> RESET_TYPE_S390_CPU_NORMAL,
> + RESET_TYPE_SOFT,
> } ResetType;
We have in general been avoiding defining a "soft" reset
because it's not clear what the meaning of it should be
or how it applies across devices.
If we want to define a new ResetType then we need
to start with the documentation which says clearly
what the semantics of it should be and when it
will be triggered.
You might prefer to avoid entangling that with this
lan9118 refactoring.
thanks
-- PMM
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 2/5] hw/net/lan9118: Extract lan9118_phy
2024-10-16 21:24 [PATCH v2 0/5] Consolidate lan9118 phy implementations Bernhard Beschow
2024-10-16 21:24 ` [PATCH v2 1/5] hw/resettable: Add SOFT reset type Bernhard Beschow
@ 2024-10-16 21:24 ` Bernhard Beschow
2024-10-16 21:24 ` [PATCH v2 3/5] hw/net/lan9118_phy: Reuse in imx_fec and consolidate implementations Bernhard Beschow
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Bernhard Beschow @ 2024-10-16 21:24 UTC (permalink / raw)
To: qemu-devel
Cc: Jason Wang, qemu-arm, Peter Maydell, Guenter Roeck, Paolo Bonzini,
Bernhard Beschow
A very similar implementation of the same device exists in imx_fec. Prepare for
a common implementation by extracting a device model into its own files.
Some migration state has been moved into the new device model which breaks
migration compatibility for the following machines:
* smdkc210
* realview-*
* vexpress-*
* kzm
* mps2-*
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
include/hw/net/lan9118_phy.h | 36 ++++++++
hw/net/lan9118.c | 137 +++++------------------------
hw/net/lan9118_phy.c | 164 +++++++++++++++++++++++++++++++++++
hw/net/Kconfig | 4 +
hw/net/meson.build | 1 +
5 files changed, 227 insertions(+), 115 deletions(-)
create mode 100644 include/hw/net/lan9118_phy.h
create mode 100644 hw/net/lan9118_phy.c
diff --git a/include/hw/net/lan9118_phy.h b/include/hw/net/lan9118_phy.h
new file mode 100644
index 0000000000..9c7e21f0c3
--- /dev/null
+++ b/include/hw/net/lan9118_phy.h
@@ -0,0 +1,36 @@
+/*
+ * SMSC LAN9118 PHY emulation
+ *
+ * Copyright (c) 2009 CodeSourcery, LLC.
+ * Written by Paul Brook
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef HW_NET_LAN9118_PHY_H
+#define HW_NET_LAN9118_PHY_H
+
+#include "qom/object.h"
+#include "hw/sysbus.h"
+
+#define TYPE_LAN9118_PHY "lan9118-phy"
+OBJECT_DECLARE_SIMPLE_TYPE(Lan9118PhyState, LAN9118_PHY)
+
+typedef struct Lan9118PhyState {
+ SysBusDevice parent_obj;
+
+ uint32_t status;
+ uint32_t control;
+ uint32_t advertise;
+ uint32_t ints;
+ uint32_t int_mask;
+ qemu_irq irq;
+ bool link_down;
+} Lan9118PhyState;
+
+void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down);
+uint32_t lan9118_phy_read(Lan9118PhyState *s, int reg);
+void lan9118_phy_write(Lan9118PhyState *s, int reg, uint32_t val);
+
+#endif
diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c
index db28a0ef30..debf0827cf 100644
--- a/hw/net/lan9118.c
+++ b/hw/net/lan9118.c
@@ -16,6 +16,7 @@
#include "net/net.h"
#include "net/eth.h"
#include "hw/irq.h"
+#include "hw/net/lan9118_phy.h"
#include "hw/net/lan9118.h"
#include "hw/ptimer.h"
#include "hw/qdev-properties.h"
@@ -139,14 +140,6 @@ do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0)
#define MAC_CR_RXEN 0x00000004
#define MAC_CR_RESERVED 0x7f404213
-#define PHY_INT_ENERGYON 0x80
-#define PHY_INT_AUTONEG_COMPLETE 0x40
-#define PHY_INT_FAULT 0x20
-#define PHY_INT_DOWN 0x10
-#define PHY_INT_AUTONEG_LP 0x08
-#define PHY_INT_PARFAULT 0x04
-#define PHY_INT_AUTONEG_PAGE 0x02
-
#define GPT_TIMER_EN 0x20000000
/*
@@ -228,11 +221,8 @@ struct lan9118_state {
uint32_t mac_mii_data;
uint32_t mac_flow;
- uint32_t phy_status;
- uint32_t phy_control;
- uint32_t phy_advertise;
- uint32_t phy_int;
- uint32_t phy_int_mask;
+ Lan9118PhyState mii;
+ IRQState mii_irq;
int32_t eeprom_writable;
uint8_t eeprom[128];
@@ -274,8 +264,8 @@ struct lan9118_state {
static const VMStateDescription vmstate_lan9118 = {
.name = "lan9118",
- .version_id = 2,
- .minimum_version_id = 1,
+ .version_id = 3,
+ .minimum_version_id = 3,
.fields = (const VMStateField[]) {
VMSTATE_PTIMER(timer, lan9118_state),
VMSTATE_UINT32(irq_cfg, lan9118_state),
@@ -301,11 +291,6 @@ static const VMStateDescription vmstate_lan9118 = {
VMSTATE_UINT32(mac_mii_acc, lan9118_state),
VMSTATE_UINT32(mac_mii_data, lan9118_state),
VMSTATE_UINT32(mac_flow, lan9118_state),
- VMSTATE_UINT32(phy_status, lan9118_state),
- VMSTATE_UINT32(phy_control, lan9118_state),
- VMSTATE_UINT32(phy_advertise, lan9118_state),
- VMSTATE_UINT32(phy_int, lan9118_state),
- VMSTATE_UINT32(phy_int_mask, lan9118_state),
VMSTATE_INT32(eeprom_writable, lan9118_state),
VMSTATE_UINT8_ARRAY(eeprom, lan9118_state, 128),
VMSTATE_INT32(tx_fifo_size, lan9118_state),
@@ -385,9 +370,11 @@ static void lan9118_reload_eeprom(lan9118_state *s)
lan9118_mac_changed(s);
}
-static void phy_update_irq(lan9118_state *s)
+static void lan9118_update_irq(void *opaque, int n, int level)
{
- if (s->phy_int & s->phy_int_mask) {
+ lan9118_state *s = opaque;
+
+ if (level) {
s->int_sts |= PHY_INT;
} else {
s->int_sts &= ~PHY_INT;
@@ -395,33 +382,10 @@ static void phy_update_irq(lan9118_state *s)
lan9118_update(s);
}
-static void phy_update_link(lan9118_state *s)
-{
- /* Autonegotiation status mirrors link status. */
- if (qemu_get_queue(s->nic)->link_down) {
- s->phy_status &= ~0x0024;
- s->phy_int |= PHY_INT_DOWN;
- } else {
- s->phy_status |= 0x0024;
- s->phy_int |= PHY_INT_ENERGYON;
- s->phy_int |= PHY_INT_AUTONEG_COMPLETE;
- }
- phy_update_irq(s);
-}
-
static void lan9118_set_link(NetClientState *nc)
{
- phy_update_link(qemu_get_nic_opaque(nc));
-}
-
-static void phy_reset(lan9118_state *s)
-{
- s->phy_status = 0x7809;
- s->phy_control = 0x3000;
- s->phy_advertise = 0x01e1;
- s->phy_int_mask = 0;
- s->phy_int = 0;
- phy_update_link(s);
+ lan9118_phy_update_link(&LAN9118(qemu_get_nic_opaque(nc))->mii,
+ nc->link_down);
}
static void lan9118_reset(DeviceState *d)
@@ -478,8 +442,6 @@ static void lan9118_reset(DeviceState *d)
s->read_word_n = 0;
s->write_word_n = 0;
- phy_reset(s);
-
s->eeprom_writable = 0;
lan9118_reload_eeprom(s);
}
@@ -678,7 +640,7 @@ static void do_tx_packet(lan9118_state *s)
uint32_t status;
/* FIXME: Honor TX disable, and allow queueing of packets. */
- if (s->phy_control & 0x4000) {
+ if (s->mii.control & 0x4000) {
/* This assumes the receive routine doesn't touch the VLANClient. */
qemu_receive_packet(qemu_get_queue(s->nic), s->txp->data, s->txp->len);
} else {
@@ -834,68 +796,6 @@ static void tx_fifo_push(lan9118_state *s, uint32_t val)
}
}
-static uint32_t do_phy_read(lan9118_state *s, int reg)
-{
- uint32_t val;
-
- switch (reg) {
- case 0: /* Basic Control */
- return s->phy_control;
- case 1: /* Basic Status */
- return s->phy_status;
- case 2: /* ID1 */
- return 0x0007;
- case 3: /* ID2 */
- return 0xc0d1;
- case 4: /* Auto-neg advertisement */
- return s->phy_advertise;
- case 5: /* Auto-neg Link Partner Ability */
- return 0x0f71;
- case 6: /* Auto-neg Expansion */
- return 1;
- /* TODO 17, 18, 27, 29, 30, 31 */
- case 29: /* Interrupt source. */
- val = s->phy_int;
- s->phy_int = 0;
- phy_update_irq(s);
- return val;
- case 30: /* Interrupt mask */
- return s->phy_int_mask;
- default:
- qemu_log_mask(LOG_GUEST_ERROR,
- "do_phy_read: PHY read reg %d\n", reg);
- return 0;
- }
-}
-
-static void do_phy_write(lan9118_state *s, int reg, uint32_t val)
-{
- switch (reg) {
- case 0: /* Basic Control */
- if (val & 0x8000) {
- phy_reset(s);
- break;
- }
- s->phy_control = val & 0x7980;
- /* Complete autonegotiation immediately. */
- if (val & 0x1000) {
- s->phy_status |= 0x0020;
- }
- break;
- case 4: /* Auto-neg advertisement */
- s->phy_advertise = (val & 0x2d7f) | 0x80;
- break;
- /* TODO 17, 18, 27, 31 */
- case 30: /* Interrupt mask */
- s->phy_int_mask = val & 0xff;
- phy_update_irq(s);
- break;
- default:
- qemu_log_mask(LOG_GUEST_ERROR,
- "do_phy_write: PHY write reg %d = 0x%04x\n", reg, val);
- }
-}
-
static void do_mac_write(lan9118_state *s, int reg, uint32_t val)
{
switch (reg) {
@@ -929,9 +829,9 @@ static void do_mac_write(lan9118_state *s, int reg, uint32_t val)
if (val & 2) {
DPRINTF("PHY write %d = 0x%04x\n",
(val >> 6) & 0x1f, s->mac_mii_data);
- do_phy_write(s, (val >> 6) & 0x1f, s->mac_mii_data);
+ lan9118_phy_write(&s->mii, (val >> 6) & 0x1f, s->mac_mii_data);
} else {
- s->mac_mii_data = do_phy_read(s, (val >> 6) & 0x1f);
+ s->mac_mii_data = lan9118_phy_read(&s->mii, (val >> 6) & 0x1f);
DPRINTF("PHY read %d = 0x%04x\n",
(val >> 6) & 0x1f, s->mac_mii_data);
}
@@ -1126,7 +1026,7 @@ static void lan9118_writel(void *opaque, hwaddr offset,
break;
case CSR_PMT_CTRL:
if (val & 0x400) {
- phy_reset(s);
+ resettable_reset(OBJECT(&s->mii), RESET_TYPE_SOFT);
}
s->pmt_ctrl &= ~0x34e;
s->pmt_ctrl |= (val & 0x34e);
@@ -1373,6 +1273,13 @@ static void lan9118_realize(DeviceState *dev, Error **errp)
const MemoryRegionOps *mem_ops =
s->mode_16bit ? &lan9118_16bit_mem_ops : &lan9118_mem_ops;
+ qemu_init_irq(&s->mii_irq, lan9118_update_irq, s, 0);
+ object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY);
+ if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) {
+ return;
+ }
+ qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq);
+
memory_region_init_io(&s->mmio, OBJECT(dev), mem_ops, s,
"lan9118-mmio", 0x100);
sysbus_init_mmio(sbd, &s->mmio);
diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c
new file mode 100644
index 0000000000..5c2faaf00a
--- /dev/null
+++ b/hw/net/lan9118_phy.c
@@ -0,0 +1,164 @@
+/*
+ * SMSC LAN9118 PHY emulation
+ *
+ * Copyright (c) 2009 CodeSourcery, LLC.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the GNU GPL v2
+ *
+ * Contributions after 2012-01-13 are licensed under the terms of the
+ * GNU GPL, version 2 or (at your option) any later version.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/net/lan9118_phy.h"
+#include "hw/irq.h"
+#include "hw/resettable.h"
+#include "migration/vmstate.h"
+#include "qemu/log.h"
+
+#define PHY_INT_ENERGYON (1 << 7)
+#define PHY_INT_AUTONEG_COMPLETE (1 << 6)
+#define PHY_INT_FAULT (1 << 5)
+#define PHY_INT_DOWN (1 << 4)
+#define PHY_INT_AUTONEG_LP (1 << 3)
+#define PHY_INT_PARFAULT (1 << 2)
+#define PHY_INT_AUTONEG_PAGE (1 << 1)
+
+static void lan9118_phy_update_irq(Lan9118PhyState *s)
+{
+ qemu_set_irq(s->irq, !!(s->ints & s->int_mask));
+}
+
+void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down)
+{
+ s->link_down = link_down;
+
+ /* Autonegotiation status mirrors link status. */
+ if (link_down) {
+ s->status &= ~0x0024;
+ s->ints |= PHY_INT_DOWN;
+ } else {
+ s->status |= 0x0024;
+ s->ints |= PHY_INT_ENERGYON;
+ s->ints |= PHY_INT_AUTONEG_COMPLETE;
+ }
+ lan9118_phy_update_irq(s);
+}
+
+static void lan9118_phy_reset(Object *obj, ResetType type)
+{
+ Lan9118PhyState *s = LAN9118_PHY(obj);
+
+ s->status = 0x7809;
+ s->control = 0x3000;
+ s->advertise = 0x01e1;
+ s->int_mask = 0;
+ s->ints = 0;
+ lan9118_phy_update_link(s, s->link_down);
+}
+
+uint32_t lan9118_phy_read(Lan9118PhyState *s, int reg)
+{
+ uint32_t val;
+
+ switch (reg) {
+ case 0: /* Basic Control */
+ return s->control;
+ case 1: /* Basic Status */
+ return s->status;
+ case 2: /* ID1 */
+ return 0x0007;
+ case 3: /* ID2 */
+ return 0xc0d1;
+ case 4: /* Auto-neg advertisement */
+ return s->advertise;
+ case 5: /* Auto-neg Link Partner Ability */
+ return 0x0f71;
+ case 6: /* Auto-neg Expansion */
+ return 1;
+ /* TODO 17, 18, 27, 29, 30, 31 */
+ case 29: /* Interrupt source. */
+ val = s->ints;
+ s->ints = 0;
+ lan9118_phy_update_irq(s);
+ return val;
+ case 30: /* Interrupt mask */
+ return s->int_mask;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "lan9118_phy_read: PHY read reg %d\n", reg);
+ return 0;
+ }
+}
+
+void lan9118_phy_write(Lan9118PhyState *s, int reg, uint32_t val)
+{
+ switch (reg) {
+ case 0: /* Basic Control */
+ if (val & 0x8000) {
+ lan9118_phy_reset(OBJECT(s), RESET_TYPE_SOFT);
+ break;
+ }
+ s->control = val & 0x7980;
+ /* Complete autonegotiation immediately. */
+ if (val & 0x1000) {
+ s->status |= 0x0020;
+ }
+ break;
+ case 4: /* Auto-neg advertisement */
+ s->advertise = (val & 0x2d7f) | 0x80;
+ break;
+ /* TODO 17, 18, 27, 31 */
+ case 30: /* Interrupt mask */
+ s->int_mask = val & 0xff;
+ lan9118_phy_update_irq(s);
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val);
+ }
+}
+
+static void lan9118_phy_init(Object *obj)
+{
+ Lan9118PhyState *s = LAN9118_PHY(obj);
+
+ qdev_init_gpio_out(DEVICE(s), &s->irq, 1);
+}
+
+static const VMStateDescription vmstate_lan9118_phy = {
+ .name = "lan9118-phy",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (const VMStateField[]) {
+ VMSTATE_UINT32(status, Lan9118PhyState),
+ VMSTATE_UINT32(control, Lan9118PhyState),
+ VMSTATE_UINT32(advertise, Lan9118PhyState),
+ VMSTATE_UINT32(ints, Lan9118PhyState),
+ VMSTATE_UINT32(int_mask, Lan9118PhyState),
+ VMSTATE_BOOL(link_down, Lan9118PhyState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void lan9118_phy_class_init(ObjectClass *klass, void *data)
+{
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ rc->phases.hold = lan9118_phy_reset;
+ dc->vmsd = &vmstate_lan9118_phy;
+}
+
+static const TypeInfo types[] = {
+ {
+ .name = TYPE_LAN9118_PHY,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(Lan9118PhyState),
+ .instance_init = lan9118_phy_init,
+ .class_init = lan9118_phy_class_init,
+ }
+};
+
+DEFINE_TYPES(types)
diff --git a/hw/net/Kconfig b/hw/net/Kconfig
index 7fcc0d7faa..6b2ff2f937 100644
--- a/hw/net/Kconfig
+++ b/hw/net/Kconfig
@@ -62,8 +62,12 @@ config VMXNET3_PCI
config SMC91C111
bool
+config LAN9118_PHY
+ bool
+
config LAN9118
bool
+ select LAN9118_PHY
select PTIMER
config NE2000_ISA
diff --git a/hw/net/meson.build b/hw/net/meson.build
index 00a9e9dd51..3bb5d749a8 100644
--- a/hw/net/meson.build
+++ b/hw/net/meson.build
@@ -19,6 +19,7 @@ system_ss.add(when: 'CONFIG_VMXNET3_PCI', if_true: files('vmxnet3.c'))
system_ss.add(when: 'CONFIG_SMC91C111', if_true: files('smc91c111.c'))
system_ss.add(when: 'CONFIG_LAN9118', if_true: files('lan9118.c'))
+system_ss.add(when: 'CONFIG_LAN9118_PHY', if_true: files('lan9118_phy.c'))
system_ss.add(when: 'CONFIG_NE2000_ISA', if_true: files('ne2000-isa.c'))
system_ss.add(when: 'CONFIG_OPENCORES_ETH', if_true: files('opencores_eth.c'))
system_ss.add(when: 'CONFIG_XGMAC', if_true: files('xgmac.c'))
--
2.47.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v2 3/5] hw/net/lan9118_phy: Reuse in imx_fec and consolidate implementations
2024-10-16 21:24 [PATCH v2 0/5] Consolidate lan9118 phy implementations Bernhard Beschow
2024-10-16 21:24 ` [PATCH v2 1/5] hw/resettable: Add SOFT reset type Bernhard Beschow
2024-10-16 21:24 ` [PATCH v2 2/5] hw/net/lan9118: Extract lan9118_phy Bernhard Beschow
@ 2024-10-16 21:24 ` Bernhard Beschow
2024-10-16 21:24 ` [PATCH v2 4/5] hw/net/lan9118_phy: Reuse MII constants Bernhard Beschow
2024-10-16 21:24 ` [PATCH v2 5/5] hw/net/lan9118_phy: Add missing 100 mbps full duplex advertisement Bernhard Beschow
4 siblings, 0 replies; 7+ messages in thread
From: Bernhard Beschow @ 2024-10-16 21:24 UTC (permalink / raw)
To: qemu-devel
Cc: Jason Wang, qemu-arm, Peter Maydell, Guenter Roeck, Paolo Bonzini,
Bernhard Beschow
imx_fec models the same PHY as lan9118_phy. The code is almost the same with
imx_fec having more logging and tracing. Merge these improvements into
lan9118_phy and reuse in imx_fec to fix the code duplication.
Some migration state how resides in the new device model which breaks migration
compatibility for the following machines:
* imx25-pdk
* sabrelite
* mcimx7d-sabre
* mcimx6ul-evk
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
include/hw/net/imx_fec.h | 9 ++-
hw/net/imx_fec.c | 146 ++++-----------------------------------
hw/net/lan9118_phy.c | 80 +++++++++++++++------
hw/net/Kconfig | 1 +
hw/net/trace-events | 10 +--
5 files changed, 84 insertions(+), 162 deletions(-)
diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index 2d13290c78..83b21637ee 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -31,6 +31,8 @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXFECState, IMX_FEC)
#define TYPE_IMX_ENET "imx.enet"
#include "hw/sysbus.h"
+#include "hw/net/lan9118_phy.h"
+#include "hw/irq.h"
#include "net/net.h"
#define ENET_EIR 1
@@ -264,11 +266,8 @@ struct IMXFECState {
uint32_t tx_descriptor[ENET_TX_RING_NUM];
uint32_t tx_ring_num;
- uint32_t phy_status;
- uint32_t phy_control;
- uint32_t phy_advertise;
- uint32_t phy_int;
- uint32_t phy_int_mask;
+ Lan9118PhyState mii;
+ IRQState mii_irq;
uint32_t phy_num;
bool phy_connected;
struct IMXFECState *phy_consumer;
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 6294d29202..4ee6f74206 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -203,17 +203,12 @@ static const VMStateDescription vmstate_imx_eth_txdescs = {
static const VMStateDescription vmstate_imx_eth = {
.name = TYPE_IMX_FEC,
- .version_id = 2,
- .minimum_version_id = 2,
+ .version_id = 3,
+ .minimum_version_id = 3,
.fields = (const VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, IMXFECState, ENET_MAX),
VMSTATE_UINT32(rx_descriptor, IMXFECState),
VMSTATE_UINT32(tx_descriptor[0], IMXFECState),
- VMSTATE_UINT32(phy_status, IMXFECState),
- VMSTATE_UINT32(phy_control, IMXFECState),
- VMSTATE_UINT32(phy_advertise, IMXFECState),
- VMSTATE_UINT32(phy_int, IMXFECState),
- VMSTATE_UINT32(phy_int_mask, IMXFECState),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription * const []) {
@@ -222,14 +217,6 @@ static const VMStateDescription vmstate_imx_eth = {
},
};
-#define PHY_INT_ENERGYON (1 << 7)
-#define PHY_INT_AUTONEG_COMPLETE (1 << 6)
-#define PHY_INT_FAULT (1 << 5)
-#define PHY_INT_DOWN (1 << 4)
-#define PHY_INT_AUTONEG_LP (1 << 3)
-#define PHY_INT_PARFAULT (1 << 2)
-#define PHY_INT_AUTONEG_PAGE (1 << 1)
-
static void imx_eth_update(IMXFECState *s);
/*
@@ -238,47 +225,19 @@ static void imx_eth_update(IMXFECState *s);
* For now we don't handle any GPIO/interrupt line, so the OS will
* have to poll for the PHY status.
*/
-static void imx_phy_update_irq(IMXFECState *s)
-{
- imx_eth_update(s);
-}
-
-static void imx_phy_update_link(IMXFECState *s)
+static void imx_phy_update_irq(void *opaque, int n, int level)
{
- /* Autonegotiation status mirrors link status. */
- if (qemu_get_queue(s->nic)->link_down) {
- trace_imx_phy_update_link("down");
- s->phy_status &= ~0x0024;
- s->phy_int |= PHY_INT_DOWN;
- } else {
- trace_imx_phy_update_link("up");
- s->phy_status |= 0x0024;
- s->phy_int |= PHY_INT_ENERGYON;
- s->phy_int |= PHY_INT_AUTONEG_COMPLETE;
- }
- imx_phy_update_irq(s);
+ imx_eth_update(opaque);
}
static void imx_eth_set_link(NetClientState *nc)
{
- imx_phy_update_link(IMX_FEC(qemu_get_nic_opaque(nc)));
-}
-
-static void imx_phy_reset(IMXFECState *s)
-{
- trace_imx_phy_reset();
-
- s->phy_status = 0x7809;
- s->phy_control = 0x3000;
- s->phy_advertise = 0x01e1;
- s->phy_int_mask = 0;
- s->phy_int = 0;
- imx_phy_update_link(s);
+ lan9118_phy_update_link(&IMX_FEC(qemu_get_nic_opaque(nc))->mii,
+ nc->link_down);
}
static uint32_t imx_phy_read(IMXFECState *s, int reg)
{
- uint32_t val;
uint32_t phy = reg / 32;
if (!s->phy_connected) {
@@ -296,54 +255,7 @@ static uint32_t imx_phy_read(IMXFECState *s, int reg)
reg %= 32;
- switch (reg) {
- case 0: /* Basic Control */
- val = s->phy_control;
- break;
- case 1: /* Basic Status */
- val = s->phy_status;
- break;
- case 2: /* ID1 */
- val = 0x0007;
- break;
- case 3: /* ID2 */
- val = 0xc0d1;
- break;
- case 4: /* Auto-neg advertisement */
- val = s->phy_advertise;
- break;
- case 5: /* Auto-neg Link Partner Ability */
- val = 0x0f71;
- break;
- case 6: /* Auto-neg Expansion */
- val = 1;
- break;
- case 29: /* Interrupt source. */
- val = s->phy_int;
- s->phy_int = 0;
- imx_phy_update_irq(s);
- break;
- case 30: /* Interrupt mask */
- val = s->phy_int_mask;
- break;
- case 17:
- case 18:
- case 27:
- case 31:
- qemu_log_mask(LOG_UNIMP, "[%s.phy]%s: reg %d not implemented\n",
- TYPE_IMX_FEC, __func__, reg);
- val = 0;
- break;
- default:
- qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n",
- TYPE_IMX_FEC, __func__, reg);
- val = 0;
- break;
- }
-
- trace_imx_phy_read(val, phy, reg);
-
- return val;
+ return lan9118_phy_read(&s->mii, reg);
}
static void imx_phy_write(IMXFECState *s, int reg, uint32_t val)
@@ -365,39 +277,7 @@ static void imx_phy_write(IMXFECState *s, int reg, uint32_t val)
reg %= 32;
- trace_imx_phy_write(val, phy, reg);
-
- switch (reg) {
- case 0: /* Basic Control */
- if (val & 0x8000) {
- imx_phy_reset(s);
- } else {
- s->phy_control = val & 0x7980;
- /* Complete autonegotiation immediately. */
- if (val & 0x1000) {
- s->phy_status |= 0x0020;
- }
- }
- break;
- case 4: /* Auto-neg advertisement */
- s->phy_advertise = (val & 0x2d7f) | 0x80;
- break;
- case 30: /* Interrupt mask */
- s->phy_int_mask = val & 0xff;
- imx_phy_update_irq(s);
- break;
- case 17:
- case 18:
- case 27:
- case 31:
- qemu_log_mask(LOG_UNIMP, "[%s.phy)%s: reg %d not implemented\n",
- TYPE_IMX_FEC, __func__, reg);
- break;
- default:
- qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n",
- TYPE_IMX_FEC, __func__, reg);
- break;
- }
+ lan9118_phy_write(&s->mii, reg, val);
}
static void imx_fec_read_bd(IMXFECBufDesc *bd, dma_addr_t addr)
@@ -682,9 +562,6 @@ static void imx_eth_reset(DeviceState *d)
s->rx_descriptor = 0;
memset(s->tx_descriptor, 0, sizeof(s->tx_descriptor));
-
- /* We also reset the PHY */
- imx_phy_reset(s);
}
static uint32_t imx_default_read(IMXFECState *s, uint32_t index)
@@ -1329,6 +1206,13 @@ static void imx_eth_realize(DeviceState *dev, Error **errp)
sysbus_init_irq(sbd, &s->irq[0]);
sysbus_init_irq(sbd, &s->irq[1]);
+ qemu_init_irq(&s->mii_irq, imx_phy_update_irq, s, 0);
+ object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY);
+ if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) {
+ return;
+ }
+ qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq);
+
qemu_macaddr_default_if_unset(&s->conf.macaddr);
s->nic = qemu_new_nic(&imx_eth_net_info, &s->conf,
diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c
index 5c2faaf00a..06e19c22c9 100644
--- a/hw/net/lan9118_phy.c
+++ b/hw/net/lan9118_phy.c
@@ -4,6 +4,8 @@
* Copyright (c) 2009 CodeSourcery, LLC.
* Written by Paul Brook
*
+ * Copyright (c) 2013 Jean-Christophe Dubois. <jcd@tribudubois.net>
+ *
* This code is licensed under the GNU GPL v2
*
* Contributions after 2012-01-13 are licensed under the terms of the
@@ -16,6 +18,7 @@
#include "hw/resettable.h"
#include "migration/vmstate.h"
#include "qemu/log.h"
+#include "trace.h"
#define PHY_INT_ENERGYON (1 << 7)
#define PHY_INT_AUTONEG_COMPLETE (1 << 6)
@@ -36,9 +39,11 @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down)
/* Autonegotiation status mirrors link status. */
if (link_down) {
+ trace_lan9118_phy_update_link("down");
s->status &= ~0x0024;
s->ints |= PHY_INT_DOWN;
} else {
+ trace_lan9118_phy_update_link("up");
s->status |= 0x0024;
s->ints |= PHY_INT_ENERGYON;
s->ints |= PHY_INT_AUTONEG_COMPLETE;
@@ -50,6 +55,8 @@ static void lan9118_phy_reset(Object *obj, ResetType type)
{
Lan9118PhyState *s = LAN9118_PHY(obj);
+ trace_lan9118_phy_reset();
+
s->status = 0x7809;
s->control = 0x3000;
s->advertise = 0x01e1;
@@ -64,59 +71,88 @@ uint32_t lan9118_phy_read(Lan9118PhyState *s, int reg)
switch (reg) {
case 0: /* Basic Control */
- return s->control;
+ val = s->control;
+ break;
case 1: /* Basic Status */
- return s->status;
+ val = s->status;
+ break;
case 2: /* ID1 */
- return 0x0007;
+ val = 0x0007;
+ break;
case 3: /* ID2 */
- return 0xc0d1;
+ val = 0xc0d1;
+ break;
case 4: /* Auto-neg advertisement */
- return s->advertise;
+ val = s->advertise;
+ break;
case 5: /* Auto-neg Link Partner Ability */
- return 0x0f71;
+ val = 0x0f71;
+ break;
case 6: /* Auto-neg Expansion */
- return 1;
- /* TODO 17, 18, 27, 29, 30, 31 */
+ val = 1;
+ break;
case 29: /* Interrupt source. */
val = s->ints;
s->ints = 0;
lan9118_phy_update_irq(s);
- return val;
+ break;
case 30: /* Interrupt mask */
- return s->int_mask;
+ val = s->int_mask;
+ break;
+ case 17:
+ case 18:
+ case 27:
+ case 31:
+ qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n",
+ __func__, reg);
+ val = 0;
+ break;
default:
- qemu_log_mask(LOG_GUEST_ERROR,
- "lan9118_phy_read: PHY read reg %d\n", reg);
- return 0;
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n",
+ __func__, reg);
+ val = 0;
+ break;
}
+
+ trace_lan9118_phy_read(val, reg);
+
+ return val;
}
void lan9118_phy_write(Lan9118PhyState *s, int reg, uint32_t val)
{
+ trace_lan9118_phy_write(val, reg);
+
switch (reg) {
case 0: /* Basic Control */
if (val & 0x8000) {
lan9118_phy_reset(OBJECT(s), RESET_TYPE_SOFT);
- break;
- }
- s->control = val & 0x7980;
- /* Complete autonegotiation immediately. */
- if (val & 0x1000) {
- s->status |= 0x0020;
+ } else {
+ s->control = val & 0x7980;
+ /* Complete autonegotiation immediately. */
+ if (val & 0x1000) {
+ s->status |= 0x0020;
+ }
}
break;
case 4: /* Auto-neg advertisement */
s->advertise = (val & 0x2d7f) | 0x80;
break;
- /* TODO 17, 18, 27, 31 */
case 30: /* Interrupt mask */
s->int_mask = val & 0xff;
lan9118_phy_update_irq(s);
break;
+ case 17:
+ case 18:
+ case 27:
+ case 31:
+ qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n",
+ __func__, reg);
+ break;
default:
- qemu_log_mask(LOG_GUEST_ERROR,
- "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val);
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n",
+ __func__, reg);
+ break;
}
}
diff --git a/hw/net/Kconfig b/hw/net/Kconfig
index 6b2ff2f937..7f80218d10 100644
--- a/hw/net/Kconfig
+++ b/hw/net/Kconfig
@@ -93,6 +93,7 @@ config ALLWINNER_SUN8I_EMAC
config IMX_FEC
bool
+ select LAN9118_PHY
config CADENCE
bool
diff --git a/hw/net/trace-events b/hw/net/trace-events
index 4c6687923e..b8e0076833 100644
--- a/hw/net/trace-events
+++ b/hw/net/trace-events
@@ -10,6 +10,12 @@ allwinner_sun8i_emac_set_link(bool active) "Set link: active=%u"
allwinner_sun8i_emac_read(uint64_t offset, uint64_t val) "MMIO read: offset=0x%" PRIx64 " value=0x%" PRIx64
allwinner_sun8i_emac_write(uint64_t offset, uint64_t val) "MMIO write: offset=0x%" PRIx64 " value=0x%" PRIx64
+# lan9118_phy.c
+lan9118_phy_read(uint32_t val, int reg) "[0x%02x] -> 0x%04" PRIx32
+lan9118_phy_write(uint32_t val, int reg) "[0x%02x] <- 0x%04" PRIx32
+lan9118_phy_update_link(const char *s) "%s"
+lan9118_phy_reset(void) ""
+
# lance.c
lance_mem_readw(uint64_t addr, uint32_t ret) "addr=0x%"PRIx64"val=0x%04x"
lance_mem_writew(uint64_t addr, uint32_t val) "addr=0x%"PRIx64"val=0x%04x"
@@ -426,12 +432,8 @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries"
i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION"
# imx_fec.c
-imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]"
imx_phy_read_num(int phy, int configured) "read request from unconfigured phy %d (configured %d)"
-imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]"
imx_phy_write_num(int phy, int configured) "write request to unconfigured phy %d (configured %d)"
-imx_phy_update_link(const char *s) "%s"
-imx_phy_reset(void) ""
imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x"
imx_enet_read_bd(uint64_t addr, int flags, int len, int data, int options, int status) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x option 0x%04x status 0x%04x"
imx_eth_tx_bd_busy(void) "tx_bd ran out of descriptors to transmit"
--
2.47.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v2 4/5] hw/net/lan9118_phy: Reuse MII constants
2024-10-16 21:24 [PATCH v2 0/5] Consolidate lan9118 phy implementations Bernhard Beschow
` (2 preceding siblings ...)
2024-10-16 21:24 ` [PATCH v2 3/5] hw/net/lan9118_phy: Reuse in imx_fec and consolidate implementations Bernhard Beschow
@ 2024-10-16 21:24 ` Bernhard Beschow
2024-10-16 21:24 ` [PATCH v2 5/5] hw/net/lan9118_phy: Add missing 100 mbps full duplex advertisement Bernhard Beschow
4 siblings, 0 replies; 7+ messages in thread
From: Bernhard Beschow @ 2024-10-16 21:24 UTC (permalink / raw)
To: qemu-devel
Cc: Jason Wang, qemu-arm, Peter Maydell, Guenter Roeck, Paolo Bonzini,
Bernhard Beschow
Prefer named constants over magic values for better readability.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
include/hw/net/mii.h | 6 +++++
hw/net/lan9118_phy.c | 59 +++++++++++++++++++++++++++-----------------
2 files changed, 43 insertions(+), 22 deletions(-)
diff --git a/include/hw/net/mii.h b/include/hw/net/mii.h
index f7feddac9b..55bf7c92a1 100644
--- a/include/hw/net/mii.h
+++ b/include/hw/net/mii.h
@@ -71,6 +71,7 @@
#define MII_BMSR_JABBER (1 << 1) /* Jabber detected */
#define MII_BMSR_EXTCAP (1 << 0) /* Ext-reg capability */
+#define MII_ANAR_RFAULT (1 << 13) /* Say we can detect faults */
#define MII_ANAR_PAUSE_ASYM (1 << 11) /* Try for asymmetric pause */
#define MII_ANAR_PAUSE (1 << 10) /* Try for pause */
#define MII_ANAR_TXFD (1 << 8)
@@ -78,6 +79,7 @@
#define MII_ANAR_10FD (1 << 6)
#define MII_ANAR_10 (1 << 5)
#define MII_ANAR_CSMACD (1 << 0)
+#define MII_ANAR_SELECT (0x001f) /* Selector bits */
#define MII_ANLPAR_ACK (1 << 14)
#define MII_ANLPAR_PAUSEASY (1 << 11) /* can pause asymmetrically */
@@ -112,6 +114,10 @@
#define RTL8201CP_PHYID1 0x0000
#define RTL8201CP_PHYID2 0x8201
+/* SMSC LAN9118 */
+#define SMSCLAN9118_PHYID1 0x0007
+#define SMSCLAN9118_PHYID2 0xc0d1
+
/* RealTek 8211E */
#define RTL8211E_PHYID1 0x001c
#define RTL8211E_PHYID2 0xc915
diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c
index 06e19c22c9..dafea5a875 100644
--- a/hw/net/lan9118_phy.c
+++ b/hw/net/lan9118_phy.c
@@ -14,6 +14,7 @@
#include "qemu/osdep.h"
#include "hw/net/lan9118_phy.h"
+#include "hw/net/mii.h"
#include "hw/irq.h"
#include "hw/resettable.h"
#include "migration/vmstate.h"
@@ -40,11 +41,11 @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down)
/* Autonegotiation status mirrors link status. */
if (link_down) {
trace_lan9118_phy_update_link("down");
- s->status &= ~0x0024;
+ s->status &= ~(MII_BMSR_AN_COMP | MII_BMSR_LINK_ST);
s->ints |= PHY_INT_DOWN;
} else {
trace_lan9118_phy_update_link("up");
- s->status |= 0x0024;
+ s->status |= MII_BMSR_AN_COMP | MII_BMSR_LINK_ST;
s->ints |= PHY_INT_ENERGYON;
s->ints |= PHY_INT_AUTONEG_COMPLETE;
}
@@ -57,9 +58,18 @@ static void lan9118_phy_reset(Object *obj, ResetType type)
trace_lan9118_phy_reset();
- s->status = 0x7809;
- s->control = 0x3000;
- s->advertise = 0x01e1;
+ s->status = MII_BMSR_100TX_FD
+ | MII_BMSR_100TX_HD
+ | MII_BMSR_10T_FD
+ | MII_BMSR_10T_HD
+ | MII_BMSR_AUTONEG
+ | MII_BMSR_EXTCAP;
+ s->control = MII_BMCR_AUTOEN | MII_BMCR_SPEED100;
+ s->advertise = MII_ANAR_TXFD
+ | MII_ANAR_TX
+ | MII_ANAR_10FD
+ | MII_ANAR_10
+ | MII_ANAR_CSMACD;
s->int_mask = 0;
s->ints = 0;
lan9118_phy_update_link(s, s->link_down);
@@ -70,26 +80,26 @@ uint32_t lan9118_phy_read(Lan9118PhyState *s, int reg)
uint32_t val;
switch (reg) {
- case 0: /* Basic Control */
+ case MII_BMCR:
val = s->control;
break;
- case 1: /* Basic Status */
+ case MII_BMSR:
val = s->status;
break;
- case 2: /* ID1 */
- val = 0x0007;
+ case MII_PHYID1:
+ val = SMSCLAN9118_PHYID1;
break;
- case 3: /* ID2 */
- val = 0xc0d1;
+ case MII_PHYID2:
+ val = SMSCLAN9118_PHYID2;
break;
- case 4: /* Auto-neg advertisement */
+ case MII_ANAR:
val = s->advertise;
break;
- case 5: /* Auto-neg Link Partner Ability */
+ case MII_ANLPAR:
val = 0x0f71;
break;
- case 6: /* Auto-neg Expansion */
- val = 1;
+ case MII_ANER:
+ val = MII_ANER_NWAY;
break;
case 29: /* Interrupt source. */
val = s->ints;
@@ -124,19 +134,24 @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint32_t val)
trace_lan9118_phy_write(val, reg);
switch (reg) {
- case 0: /* Basic Control */
- if (val & 0x8000) {
+ case MII_BMCR:
+ if (val & MII_BMCR_RESET) {
lan9118_phy_reset(OBJECT(s), RESET_TYPE_SOFT);
} else {
- s->control = val & 0x7980;
+ s->control = val & (MII_BMCR_LOOPBACK | MII_BMCR_SPEED100 |
+ MII_BMCR_AUTOEN | MII_BMCR_PDOWN | MII_BMCR_FD |
+ MII_BMCR_CTST);
/* Complete autonegotiation immediately. */
- if (val & 0x1000) {
- s->status |= 0x0020;
+ if (val & MII_BMCR_AUTOEN) {
+ s->status |= MII_BMSR_AN_COMP;
}
}
break;
- case 4: /* Auto-neg advertisement */
- s->advertise = (val & 0x2d7f) | 0x80;
+ case MII_ANAR:
+ s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM |
+ MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 |
+ MII_ANAR_SELECT))
+ | MII_ANAR_TX;
break;
case 30: /* Interrupt mask */
s->int_mask = val & 0xff;
--
2.47.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v2 5/5] hw/net/lan9118_phy: Add missing 100 mbps full duplex advertisement
2024-10-16 21:24 [PATCH v2 0/5] Consolidate lan9118 phy implementations Bernhard Beschow
` (3 preceding siblings ...)
2024-10-16 21:24 ` [PATCH v2 4/5] hw/net/lan9118_phy: Reuse MII constants Bernhard Beschow
@ 2024-10-16 21:24 ` Bernhard Beschow
4 siblings, 0 replies; 7+ messages in thread
From: Bernhard Beschow @ 2024-10-16 21:24 UTC (permalink / raw)
To: qemu-devel
Cc: Jason Wang, qemu-arm, Peter Maydell, Guenter Roeck, Paolo Bonzini,
Bernhard Beschow
The real device advertises this mode and the device model already advertises
100 mbps half duplex and 10 mbps full+half duplex. So advertise this mode to
make the model more realistic.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
hw/net/lan9118_phy.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c
index dafea5a875..5f9737556f 100644
--- a/hw/net/lan9118_phy.c
+++ b/hw/net/lan9118_phy.c
@@ -149,8 +149,8 @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint32_t val)
break;
case MII_ANAR:
s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM |
- MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 |
- MII_ANAR_SELECT))
+ MII_ANAR_PAUSE | MII_ANAR_TXFD | MII_ANAR_10FD |
+ MII_ANAR_10 | MII_ANAR_SELECT))
| MII_ANAR_TX;
break;
case 30: /* Interrupt mask */
--
2.47.0
^ permalink raw reply related [flat|nested] 7+ messages in thread