[PULL 07/10] hw/timer/aspeed: Fix interrupt status does not be cleared for AST2600

["Cédric Le Goater" <clg@redhat.com>]

From: Jamin Lin <jamin_lin@aspeedtech.com>

According to the datasheet of AST2600 description, interrupt status set by HW
and clear to "0" by software writing "1" on the specific bit.

Therefore, if firmware set the specific bit "1" in the interrupt status
register(0x34), the specific bit of "s->irq_sts" should be cleared 0.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Fixes: fadefada4d07 ("aspeed/timer: Add support for IRQ status register on the AST2600")
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
 hw/timer/aspeed_timer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c
index 5af268ea9ebc..149f7cc5a6aa 100644
--- a/hw/timer/aspeed_timer.c
+++ b/hw/timer/aspeed_timer.c
@@ -580,7 +580,7 @@ static void aspeed_2600_timer_write(AspeedTimerCtrlState *s, hwaddr offset,
 
     switch (offset) {
     case 0x34:
-        s->irq_sts &= tv;
+        s->irq_sts &= ~tv;
         break;
     case 0x3C:
         aspeed_timer_set_ctrl(s, s->ctrl & ~tv);
-- 
2.47.0