[PATCH RESEND v2 16/19] hw/net/xilinx_ethlite: Map TX_CTRL as MMIO

["Philippe Mathieu-Daudé" <philmd@linaro.org>]

Add TX_CTRL to the TX registers MMIO region.

The memory flat view becomes:

  (qemu) info mtree -f
  FlatView #0
   Root memory region: system
    0000000081000000-00000000810007e3 (prio 0, i/o): xlnx.xps-ethernetlite
    00000000810007e4-00000000810007f3 (prio 0, i/o): ethlite.mdio
    00000000810007f4-00000000810007ff (prio 0, i/o): ethlite.tx[0]io
    0000000081000800-0000000081000ff3 (prio 0, i/o): xlnx.xps-ethernetlite @0000000000000800
    0000000081000ff4-0000000081000fff (prio 0, i/o): ethlite.tx[1]io
    0000000081001000-00000000810017fb (prio 0, i/o): xlnx.xps-ethernetlite @0000000000001000
    00000000810017fc-00000000810017ff (prio 0, i/o): ethlite.rx[0]io
    0000000081001800-0000000081001ffb (prio 0, i/o): xlnx.xps-ethernetlite @0000000000001800
    0000000081001ffc-0000000081001fff (prio 0, i/o): ethlite.rx[1]io

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
---
 hw/net/xilinx_ethlite.c | 54 ++++++++++++++++++-----------------------
 1 file changed, 24 insertions(+), 30 deletions(-)

diff --git a/hw/net/xilinx_ethlite.c b/hw/net/xilinx_ethlite.c
index 038e81dcae..c710857cfd 100644
--- a/hw/net/xilinx_ethlite.c
+++ b/hw/net/xilinx_ethlite.c
@@ -42,10 +42,8 @@
 #define BUFSZ_MAX      0x07e4
 #define A_MDIO_BASE    0x07e4
 #define A_TX_BASE0     0x07f4
-#define R_TX_CTRL0    (0x07fc / 4)
 #define R_TX_BUF1     (0x0800 / 4)
 #define A_TX_BASE1     0x0ff4
-#define R_TX_CTRL1    (0x0ffc / 4)
 
 #define R_RX_BUF0     (0x1000 / 4)
 #define A_RX_BASE0     0x17fc
@@ -56,6 +54,7 @@
 enum {
     TX_LEN =  0,
     TX_GIE =  1,
+    TX_CTRL = 2,
     TX_MAX
 };
 
@@ -145,6 +144,9 @@ static uint64_t port_tx_read(void *opaque, hwaddr addr, unsigned int size)
         case TX_GIE:
             r = s->port[port_index].reg.tx_gie;
             break;
+        case TX_CTRL:
+            r = s->port[port_index].reg.tx_ctrl;
+            break;
         default:
             g_assert_not_reached();
     }
@@ -165,6 +167,26 @@ static void port_tx_write(void *opaque, hwaddr addr, uint64_t value,
         case TX_GIE:
             s->port[port_index].reg.tx_gie = value;
             break;
+        case TX_CTRL:
+            if ((value & (CTRL_P | CTRL_S)) == CTRL_S) {
+                qemu_send_packet(qemu_get_queue(s->nic),
+                                 txbuf_ptr(s, port_index),
+                                 s->port[port_index].reg.tx_len);
+                if (s->port[port_index].reg.tx_ctrl & CTRL_I) {
+                    eth_pulse_irq(s);
+                }
+            } else if ((value & (CTRL_P | CTRL_S)) == (CTRL_P | CTRL_S)) {
+                memcpy(&s->conf.macaddr.a[0], txbuf_ptr(s, port_index), 6);
+                if (s->port[port_index].reg.tx_ctrl & CTRL_I) {
+                    eth_pulse_irq(s);
+                }
+            }
+            /*
+             * We are fast and get ready pretty much immediately
+             * so we actually never flip the S nor P bits to one.
+             */
+            s->port[port_index].reg.tx_ctrl = value & ~(CTRL_P | CTRL_S);
+            break;
         default:
             g_assert_not_reached();
     }
@@ -237,18 +259,12 @@ static uint64_t
 eth_read(void *opaque, hwaddr addr, unsigned int size)
 {
     XlnxXpsEthLite *s = opaque;
-    unsigned port_index = addr_to_port_index(addr);
     uint32_t r = 0;
 
     addr >>= 2;
 
     switch (addr)
     {
-        case R_TX_CTRL1:
-        case R_TX_CTRL0:
-            r = s->port[port_index].reg.tx_ctrl;
-            break;
-
         default:
             r = tswap32(s->regs[addr]);
             break;
@@ -261,33 +277,11 @@ eth_write(void *opaque, hwaddr addr,
           uint64_t val64, unsigned int size)
 {
     XlnxXpsEthLite *s = opaque;
-    unsigned int port_index = addr_to_port_index(addr);
     uint32_t value = val64;
 
     addr >>= 2;
     switch (addr) 
     {
-        case R_TX_CTRL0:
-        case R_TX_CTRL1:
-            if ((value & (CTRL_P | CTRL_S)) == CTRL_S) {
-                qemu_send_packet(qemu_get_queue(s->nic),
-                                 txbuf_ptr(s, port_index),
-                                 s->port[port_index].reg.tx_len);
-                if (s->port[port_index].reg.tx_ctrl & CTRL_I) {
-                    eth_pulse_irq(s);
-                }
-            } else if ((value & (CTRL_P | CTRL_S)) == (CTRL_P | CTRL_S)) {
-                memcpy(&s->conf.macaddr.a[0], txbuf_ptr(s, port_index), 6);
-                if (s->port[port_index].reg.tx_ctrl & CTRL_I) {
-                    eth_pulse_irq(s);
-                }
-            }
-
-            /* We are fast and get ready pretty much immediately so
-               we actually never flip the S nor P bits to one.  */
-            s->port[port_index].reg.tx_ctrl = value & ~(CTRL_P | CTRL_S);
-            break;
-
         default:
             s->regs[addr] = tswap32(value);
             break;
-- 
2.45.2