qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Zhao Liu <zhao1.liu@intel.com>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	"Manos Pitsidianakis" <manos.pitsidianakis@linaro.org>,
	"Junjie Mao" <junjie.mao@hotmail.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Peter Maydell" <peter.maydell@linaro.org>
Cc: qemu-devel@nongnu.org, qemu-rust@nongnu.org,
	Zhao Liu <zhao1.liu@intel.com>
Subject: [RFC 09/13] i386/fw_cfg: move hpet_cfg definition to hpet.c
Date: Thu,  5 Dec 2024 14:07:10 +0800	[thread overview]
Message-ID: <20241205060714.256270-10-zhao1.liu@intel.com> (raw)
In-Reply-To: <20241205060714.256270-1-zhao1.liu@intel.com>

HPET device needs to access and update hpet_cfg variable, but now it is
defined in hw/i386/fw_cfg.c and Rust code can't access it.

Move hpet_cfg definition to hpet.c (and rename it to hpet_fw_cfg). This
allows Rust HPET device implements its own global hpet_fw_cfg variable,
and will further reduce the use of unsafe C code access and calls in the
Rust HPET implementation.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
---
 hw/i386/fw_cfg.c        |  4 +---
 hw/timer/hpet.c         | 16 +++++++++-------
 include/hw/timer/hpet.h |  2 +-
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/hw/i386/fw_cfg.c b/hw/i386/fw_cfg.c
index 0e4494627c21..965e6306838a 100644
--- a/hw/i386/fw_cfg.c
+++ b/hw/i386/fw_cfg.c
@@ -26,8 +26,6 @@
 #include CONFIG_DEVICES
 #include "target/i386/cpu.h"
 
-struct hpet_fw_config hpet_cfg = {.count = UINT8_MAX};
-
 const char *fw_cfg_arch_key_name(uint16_t key)
 {
     static const struct {
@@ -149,7 +147,7 @@ FWCfgState *fw_cfg_arch_create(MachineState *ms,
 #endif
     fw_cfg_add_i32(fw_cfg, FW_CFG_IRQ0_OVERRIDE, 1);
 
-    fw_cfg_add_bytes(fw_cfg, FW_CFG_HPET, &hpet_cfg, sizeof(hpet_cfg));
+    fw_cfg_add_bytes(fw_cfg, FW_CFG_HPET, &hpet_fw_cfg, sizeof(hpet_fw_cfg));
     /* allocate memory for the NUMA channel: one (64bit) word for the number
      * of nodes, one word for each VCPU->node and one word for each node to
      * hold the amount of memory.
diff --git a/hw/timer/hpet.c b/hw/timer/hpet.c
index 5399f1b2a3f7..d8bd51b7e202 100644
--- a/hw/timer/hpet.c
+++ b/hw/timer/hpet.c
@@ -40,6 +40,8 @@
 #include "qom/object.h"
 #include "trace.h"
 
+struct hpet_fw_config hpet_fw_cfg = {.count = UINT8_MAX};
+
 #define HPET_MSI_SUPPORT        0
 
 OBJECT_DECLARE_SIMPLE_TYPE(HPETState, HPET)
@@ -278,7 +280,7 @@ static int hpet_post_load(void *opaque, int version_id)
     /* Push number of timers into capability returned via HPET_ID */
     s->capability &= ~HPET_ID_NUM_TIM_MASK;
     s->capability |= (s->num_timers - 1) << HPET_ID_NUM_TIM_SHIFT;
-    hpet_cfg.hpet[s->hpet_id].event_timer_block_id = (uint32_t)s->capability;
+    hpet_fw_cfg.hpet[s->hpet_id].event_timer_block_id = (uint32_t)s->capability;
 
     /* Derive HPET_MSI_SUPPORT from the capability of the first timer. */
     s->flags &= ~(1 << HPET_MSI_SUPPORT);
@@ -665,8 +667,8 @@ static void hpet_reset(DeviceState *d)
     s->hpet_counter = 0ULL;
     s->hpet_offset = 0ULL;
     s->config = 0ULL;
-    hpet_cfg.hpet[s->hpet_id].event_timer_block_id = (uint32_t)s->capability;
-    hpet_cfg.hpet[s->hpet_id].address = sbd->mmio[0].addr;
+    hpet_fw_cfg.hpet[s->hpet_id].event_timer_block_id = (uint32_t)s->capability;
+    hpet_fw_cfg.hpet[s->hpet_id].address = sbd->mmio[0].addr;
 
     /* to document that the RTC lowers its output on reset as well */
     s->rtc_irq_level = 0;
@@ -708,17 +710,17 @@ static void hpet_realize(DeviceState *dev, Error **errp)
     if (!s->intcap) {
         warn_report("Hpet's intcap not initialized");
     }
-    if (hpet_cfg.count == UINT8_MAX) {
+    if (hpet_fw_cfg.count == UINT8_MAX) {
         /* first instance */
-        hpet_cfg.count = 0;
+        hpet_fw_cfg.count = 0;
     }
 
-    if (hpet_cfg.count == 8) {
+    if (hpet_fw_cfg.count == 8) {
         error_setg(errp, "Only 8 instances of HPET is allowed");
         return;
     }
 
-    s->hpet_id = hpet_cfg.count++;
+    s->hpet_id = hpet_fw_cfg.count++;
 
     for (i = 0; i < HPET_NUM_IRQ_ROUTES; i++) {
         sysbus_init_irq(sbd, &s->irqs[i]);
diff --git a/include/hw/timer/hpet.h b/include/hw/timer/hpet.h
index d17a8d43199e..dbf709251a8f 100644
--- a/include/hw/timer/hpet.h
+++ b/include/hw/timer/hpet.h
@@ -74,7 +74,7 @@ struct hpet_fw_config
     struct hpet_fw_entry hpet[8];
 } QEMU_PACKED;
 
-extern struct hpet_fw_config hpet_cfg;
+extern struct hpet_fw_config hpet_fw_cfg;
 
 #define TYPE_HPET "hpet"
 
-- 
2.34.1



  parent reply	other threads:[~2024-12-05  5:49 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-05  6:07 [RFC 00/13] rust: Reinvent the wheel for HPET timer in Rust Zhao Liu
2024-12-05  6:07 ` [RFC 01/13] bql: check that the BQL is not dropped within marked sections Zhao Liu
2024-12-05  6:07 ` [RFC 02/13] rust: cell: add BQL-enforcing RefCell variant Zhao Liu
2024-12-05  6:07 ` [RFC 03/13] rust/cell: add get_mut() method for BqlCell Zhao Liu
2024-12-05 15:55   ` Paolo Bonzini
2024-12-07 15:56     ` Zhao Liu
2024-12-07 19:49       ` Paolo Bonzini
2024-12-05  6:07 ` [RFC 04/13] rust: add bindings for gpio_{in|out} initialization Zhao Liu
2024-12-05 18:53   ` Paolo Bonzini
2024-12-08 16:27     ` Zhao Liu
2024-12-09 11:08       ` Paolo Bonzini
2025-01-16  3:04         ` Zhao Liu
2025-01-17  9:40           ` Paolo Bonzini
2025-01-17 11:14             ` Zhao Liu
2025-01-17 12:47               ` Paolo Bonzini
2024-12-05  6:07 ` [RFC 05/13] rust: add a bit operation binding for deposit64 Zhao Liu
2024-12-05 16:09   ` Paolo Bonzini
2024-12-07 16:01     ` Zhao Liu
2024-12-07 19:44       ` Paolo Bonzini
2024-12-05  6:07 ` [RFC 06/13] rust: add bindings for memattrs Zhao Liu
2024-12-05 18:15   ` Richard Henderson
2024-12-05 18:30     ` Paolo Bonzini
2024-12-05 23:51       ` Richard Henderson
2024-12-06  8:41         ` Zhao Liu
2024-12-06 14:07           ` Richard Henderson
2024-12-06 10:59       ` Peter Maydell
2024-12-06 14:28         ` Paolo Bonzini
2024-12-06 14:42           ` Peter Maydell
2024-12-06 19:13             ` Paolo Bonzini
2025-01-20 16:52               ` Zhao Liu
2025-01-20 17:19                 ` Paolo Bonzini
2025-01-23 15:10                   ` Zhao Liu
2025-01-23 15:33                     ` Paolo Bonzini
2024-12-07  9:21         ` Philippe Mathieu-Daudé
2024-12-08  9:30           ` Paolo Bonzini
2024-12-08 15:51             ` Zhao Liu
2024-12-05  6:07 ` [RFC 07/13] rust: add bindings for timer Zhao Liu
2024-12-05 18:18   ` Richard Henderson
2024-12-07 17:18     ` Zhao Liu
2024-12-05 18:46   ` Paolo Bonzini
2024-12-07 16:54     ` Zhao Liu
2025-01-14 15:36     ` Zhao Liu
2025-01-14 15:42       ` Zhao Liu
2025-01-14 16:14       ` Paolo Bonzini
2025-01-15  7:09         ` Zhao Liu
2024-12-05  6:07 ` [RFC 08/13] rust/qdev: add the macro to define bit property Zhao Liu
2024-12-05  6:07 ` Zhao Liu [this message]
2024-12-05 12:04   ` [RFC 09/13] i386/fw_cfg: move hpet_cfg definition to hpet.c Philippe Mathieu-Daudé
2024-12-05 12:46     ` Zhao Liu
2024-12-05 21:17       ` Philippe Mathieu-Daudé
2024-12-05 21:19         ` Paolo Bonzini
2024-12-07  9:16           ` Philippe Mathieu-Daudé
2024-12-07 15:36             ` Zhao Liu
2024-12-05 15:30   ` Paolo Bonzini
2024-12-07 15:28     ` Zhao Liu
2025-01-17 10:31     ` Zhao Liu
2025-01-17 10:15       ` Paolo Bonzini
2024-12-05  6:07 ` [RFC 10/13] rust/timer/hpet: define hpet_fw_cfg Zhao Liu
2024-12-05  6:07 ` [RFC 11/13] rust/timer/hpet: add basic HPET timer & state Zhao Liu
2024-12-05 20:22   ` Paolo Bonzini
2024-12-05 21:20     ` Paolo Bonzini
2024-12-09  7:46       ` Zhao Liu
2024-12-09  7:26     ` Zhao Liu
2024-12-05  6:07 ` [RFC 12/13] rust/timer/hpet: add qdev APIs support Zhao Liu
2024-12-05 18:58   ` Paolo Bonzini
2024-12-07 16:05     ` Zhao Liu
2024-12-05  6:07 ` [RFC 13/13] i386: enable rust hpet for pc when rust is enabled Zhao Liu
2024-12-05 15:20   ` Paolo Bonzini
2024-12-06  9:06     ` Zhao Liu
2024-12-05  6:22 ` [RFC 00/13] rust: Reinvent the wheel for HPET timer in Rust Zhao Liu
2024-12-05 16:28 ` Paolo Bonzini
2024-12-09  7:57   ` Zhao Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241205060714.256270-10-zhao1.liu@intel.com \
    --to=zhao1.liu@intel.com \
    --cc=alex.bennee@linaro.org \
    --cc=junjie.mao@hotmail.com \
    --cc=manos.pitsidianakis@linaro.org \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-rust@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).