[PULL 05/29] hw/usb/uhci: Introduce and use register defines

["Philippe Mathieu-Daudé" <philmd@linaro.org>]

From: Guenter Roeck <linux@roeck-us.net>

Introduce defines for UHCI registers to simplify adding register access
in subsequent patches of the series.

No functional change.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240906122542.3808997-3-linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 include/hw/usb/uhci-regs.h | 11 +++++++++++
 hw/usb/hcd-uhci.c          | 32 ++++++++++++++++----------------
 2 files changed, 27 insertions(+), 16 deletions(-)

diff --git a/include/hw/usb/uhci-regs.h b/include/hw/usb/uhci-regs.h
index fd45d29db0f..5b81714e5c2 100644
--- a/include/hw/usb/uhci-regs.h
+++ b/include/hw/usb/uhci-regs.h
@@ -1,6 +1,17 @@
 #ifndef HW_USB_UHCI_REGS_H
 #define HW_USB_UHCI_REGS_H
 
+#define UHCI_USBCMD       0
+#define UHCI_USBSTS       2
+#define UHCI_USBINTR      4
+#define UHCI_USBFRNUM     6
+#define UHCI_USBFLBASEADD 8
+#define UHCI_USBSOF       0x0c
+#define UHCI_USBPORTSC1   0x10
+#define UHCI_USBPORTSC2   0x12
+#define UHCI_USBPORTSC3   0x14
+#define UHCI_USBPORTSC4   0x16
+
 #define UHCI_CMD_FGR      (1 << 4)
 #define UHCI_CMD_EGSM     (1 << 3)
 #define UHCI_CMD_GRESET   (1 << 2)
diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c
index 7c0cc694554..8528d493d63 100644
--- a/hw/usb/hcd-uhci.c
+++ b/hw/usb/hcd-uhci.c
@@ -389,7 +389,7 @@ static void uhci_port_write(void *opaque, hwaddr addr,
     trace_usb_uhci_mmio_writew(addr, val);
 
     switch (addr) {
-    case 0x00:
+    case UHCI_USBCMD:
         if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) {
             /* start frame processing */
             trace_usb_uhci_schedule_start();
@@ -424,7 +424,7 @@ static void uhci_port_write(void *opaque, hwaddr addr,
             }
         }
         break;
-    case 0x02:
+    case UHCI_USBSTS:
         s->status &= ~val;
         /*
          * XXX: the chip spec is not coherent, so we add a hidden
@@ -435,27 +435,27 @@ static void uhci_port_write(void *opaque, hwaddr addr,
         }
         uhci_update_irq(s);
         break;
-    case 0x04:
+    case UHCI_USBINTR:
         s->intr = val;
         uhci_update_irq(s);
         break;
-    case 0x06:
+    case UHCI_USBFRNUM:
         if (s->status & UHCI_STS_HCHALTED) {
             s->frnum = val & 0x7ff;
         }
         break;
-    case 0x08:
+    case UHCI_USBFLBASEADD:
         s->fl_base_addr &= 0xffff0000;
         s->fl_base_addr |= val & ~0xfff;
         break;
-    case 0x0a:
+    case UHCI_USBFLBASEADD + 2:
         s->fl_base_addr &= 0x0000ffff;
         s->fl_base_addr |= (val << 16);
         break;
-    case 0x0c:
+    case UHCI_USBSOF:
         s->sof_timing = val & 0xff;
         break;
-    case 0x10 ... 0x1f:
+    case UHCI_USBPORTSC1 ... UHCI_USBPORTSC4:
         {
             UHCIPort *port;
             USBDevice *dev;
@@ -493,28 +493,28 @@ static uint64_t uhci_port_read(void *opaque, hwaddr addr, unsigned size)
     uint32_t val;
 
     switch (addr) {
-    case 0x00:
+    case UHCI_USBCMD:
         val = s->cmd;
         break;
-    case 0x02:
+    case UHCI_USBSTS:
         val = s->status;
         break;
-    case 0x04:
+    case UHCI_USBINTR:
         val = s->intr;
         break;
-    case 0x06:
+    case UHCI_USBFRNUM:
         val = s->frnum;
         break;
-    case 0x08:
+    case UHCI_USBFLBASEADD:
         val = s->fl_base_addr & 0xffff;
         break;
-    case 0x0a:
+    case UHCI_USBFLBASEADD + 2:
         val = (s->fl_base_addr >> 16) & 0xffff;
         break;
-    case 0x0c:
+    case UHCI_USBSOF:
         val = s->sof_timing;
         break;
-    case 0x10 ... 0x1f:
+    case UHCI_USBPORTSC1 ... UHCI_USBPORTSC4:
         {
             UHCIPort *port;
             int n;
-- 
2.47.1