[PULL 09/12] aspeed: Create sd devices only when defaults are enabled

["Cédric Le Goater" <clg@redhat.com>]

When the -nodefaults option is set, sd devices should not be
automatically created by the machine. Instead they should be defined
on the command line.

Note that it is not currently possible to define which bus an
"sd-card" device is attached to:

  -blockdev node-name=drive0,driver=file,filename=/path/to/file.img \
  -device sd-card,drive=drive0,id=sd0

and the first bus named "sd-bus" will be used.

Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/qemu-devel/20250122070909.1138598-10-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
 hw/arm/aspeed.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 53a859a6e4aa..d9418e2b9f2c 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -456,14 +456,14 @@ static void aspeed_machine_init(MachineState *machine)
         amc->i2c_init(bmc);
     }
 
-    for (i = 0; i < bmc->soc->sdhci.num_slots; i++) {
+    for (i = 0; i < bmc->soc->sdhci.num_slots && defaults_enabled(); i++) {
         sdhci_attach_drive(&bmc->soc->sdhci.slots[i],
                            drive_get(IF_SD, 0, i), false, false);
     }
 
     boot_emmc = sc->boot_from_emmc(bmc->soc);
 
-    if (bmc->soc->emmc.num_slots) {
+    if (bmc->soc->emmc.num_slots && defaults_enabled()) {
         emmc0 = drive_get(IF_SD, 0, bmc->soc->sdhci.num_slots);
         sdhci_attach_drive(&bmc->soc->emmc.slots[0], emmc0, true, boot_emmc);
     }
-- 
2.48.1