Re: [PATCH v2 04/13] acpi/ghes: Use HEST table offsets when preparing GHES records

[Igor Mammedov <imammedo@redhat.com>]

On Wed, 29 Jan 2025 09:04:10 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> There are two pointers that are needed during error injection:
> 
> 1. The start address of the CPER block to be stored;
> 2. The address of the ack.
> 
> It is preferable to calculate them from the HEST table.  This allows
> checking the source ID, the size of the table and the type of the
> HEST error block structures.
> 
> Yet, keep the old code, as this is needed for migration purposes.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  hw/acpi/ghes.c | 111 ++++++++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 101 insertions(+), 10 deletions(-)
> 
> diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
> index db6bed010eb0..adf80945c6db 100644
> --- a/hw/acpi/ghes.c
> +++ b/hw/acpi/ghes.c
> @@ -61,6 +61,25 @@
>   */
>  #define ACPI_GHES_GESB_SIZE                 20
>  
> +/*
> + * Offsets with regards to the start of the HEST table stored at
> + * ags->hest_addr_le, according with the memory layout map at
> + * docs/specs/acpi_hest_ghes.rst.
> + */
> +
> +/*
> + * ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2
> + * Table 18-382 Generic Hardware Error Source version 2 (GHESv2) Structure
> + */
> +#define HEST_GHES_V2_TABLE_SIZE  92
> +#define GHES_READ_ACK_ADDR_OFF          64
> +
> +/*
> + * ACPI 6.2: 18.3.2.7: Generic Hardware Error Source
> + * Table 18-380: 'Error Status Address' field
> + */
> +#define GHES_ERR_STATUS_ADDR_OFF  20
> +
>  /*
>   * Values for error_severity field
>   */
> @@ -212,14 +231,6 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker,
>  {
>      int i, error_status_block_offset;
>  
> -    /*
> -     * TODO: Current version supports only one source.
> -     * A further patch will drop this check, after adding a proper migration
> -     * code, as, for the code to work, we need to store a bios pointer to the
> -     * HEST table.
> -     */
> -    assert(num_sources == 1);
> -
>      /* Build error_block_address */
>      for (i = 0; i < num_sources; i++) {
>          build_append_int_noprefix(hardware_errors, 0, sizeof(uint64_t));
> @@ -420,6 +431,81 @@ static void get_hw_error_offsets(uint64_t ghes_addr,
>      *read_ack_register_addr = ghes_addr + sizeof(uint64_t);
>  }
>  
> +static void get_ghes_source_offsets(uint16_t source_id,
> +                                    uint64_t hest_entry_addr,

now, confusion introduced in 3/13
(hest_addr_le not actually being start of the table but named as such)
continues here 

> +                                    uint64_t *cper_addr,
> +                                    uint64_t *read_ack_start_addr,
> +                                    Error **errp)
> +{
> +    uint64_t hest_err_block_addr, hest_read_ack_addr;
> +    uint64_t err_source_entry, error_block_addr;
> +    uint32_t num_sources, i;
> +
> +    if (!hest_entry_addr) {
> +        return;
> +    }
> +
> +    cpu_physical_memory_read(hest_entry_addr, &num_sources,
> +                             sizeof(num_sources));

hest_entry_addr implies to me error source entry, while what
you are reading here is a part of HEST but not a part of error source

suggest s/hest_entry_addr/hest_addr/ and then read from
  hest_addr + 'Error Source Count'_offset 

> +    num_sources = le32_to_cpu(num_sources);
> +
> +    err_source_entry = hest_entry_addr + sizeof(num_sources);

and amend this line to point to 1st error source entry 

> +
> +    /*
> +     * Currently, HEST Error source navigates only for GHESv2 tables
> +     */
> +
> +    for (i = 0; i < num_sources; i++) {
> +        uint64_t addr = err_source_entry;
> +        uint16_t type, src_id;
> +
> +        cpu_physical_memory_read(addr, &type, sizeof(type));
> +        type = le16_to_cpu(type);
> +
> +        /* For now, we only know the size of GHESv2 table */
> +        if (type != ACPI_GHES_SOURCE_GENERIC_ERROR_V2) {
> +            error_setg(errp, "HEST: type %d not supported.", type);
> +            return;
> +        }
> +
> +        /* Compare CPER source address at the GHESv2 structure */
> +        addr += sizeof(type);
> +        cpu_physical_memory_read(addr, &src_id, sizeof(src_id));

> +

I'd drop this new line

> +        if (le16_to_cpu(src_id) == source_id) {
> +            break;
> +        }
> +
> +        err_source_entry += HEST_GHES_V2_TABLE_SIZE;
> +    }
> +    if (i == num_sources) {
> +        error_setg(errp, "HEST: Source %d not found.", source_id);
> +        return;
> +    }
> +
> +    /* Navigate though table address pointers */
> +    hest_err_block_addr = err_source_entry + GHES_ERR_STATUS_ADDR_OFF +
> +                          GAS_ADDR_OFFSET;
> +
> +    cpu_physical_memory_read(hest_err_block_addr, &error_block_addr,
> +                             sizeof(error_block_addr));
> +
> +    error_block_addr = le64_to_cpu(error_block_addr);
> +
> +    cpu_physical_memory_read(error_block_addr, cper_addr,
> +                             sizeof(*cper_addr));
> +
> +    *cper_addr = le64_to_cpu(*cper_addr);
> +
> +    hest_read_ack_addr = err_source_entry + GHES_READ_ACK_ADDR_OFF +
> +                         GAS_ADDR_OFFSET;
> +
> +    cpu_physical_memory_read(hest_read_ack_addr, read_ack_start_addr,
> +                             sizeof(*read_ack_start_addr));
> +
> +    *read_ack_start_addr = le64_to_cpu(*read_ack_start_addr);
> +}
> +
>  void ghes_record_cper_errors(const void *cper, size_t len,
>                               uint16_t source_id, Error **errp)
>  {
> @@ -440,8 +526,13 @@ void ghes_record_cper_errors(const void *cper, size_t len,
>      }
>      ags = &acpi_ged_state->ghes_state;
>  
> -    get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
> -                         &cper_addr, &read_ack_register_addr);
> +    if (!ags->hest_addr_le) {
> +        get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
> +                             &cper_addr, &read_ack_register_addr);
> +    } else {
> +        get_ghes_source_offsets(source_id, le64_to_cpu(ags->hest_addr_le),
> +                                &cper_addr, &read_ack_register_addr, errp);
> +    }
>  
>      if (!cper_addr) {
>          error_setg(errp, "can not find Generic Error Status Block");