From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PULL 27/36] hw/sd/omap_mmc: Convert remaining 'struct omap_mmc_s' uses to OMAPMMCState
Date: Fri, 31 Jan 2025 22:05:10 +0100 [thread overview]
Message-ID: <20250131210520.85874-28-philmd@linaro.org> (raw)
In-Reply-To: <20250131210520.85874-1-philmd@linaro.org>
From: Peter Maydell <peter.maydell@linaro.org>
Mechanically convert the remaining uses of 'struct omap_mmc_s' to
'OMAPMMCState'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
include/hw/arm/omap.h | 2 +-
hw/sd/omap_mmc.c | 20 ++++++++++----------
2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h
index 6339c5a581e..7d1a1afc4f8 100644
--- a/include/hw/arm/omap.h
+++ b/include/hw/arm/omap.h
@@ -530,7 +530,7 @@ struct omap_lcd_panel_s *omap_lcdc_init(MemoryRegion *sysmem,
/* omap_mmc.c */
#define TYPE_OMAP_MMC "omap-mmc"
-OBJECT_DECLARE_SIMPLE_TYPE(omap_mmc_s, OMAP_MMC)
+OBJECT_DECLARE_SIMPLE_TYPE(OMAPMMCState, OMAP_MMC)
DeviceState *omap_mmc_init(hwaddr base,
MemoryRegion *sysmem,
diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c
index fec2cfd4d66..0f17479ecb8 100644
--- a/hw/sd/omap_mmc.c
+++ b/hw/sd/omap_mmc.c
@@ -27,7 +27,7 @@
#include "hw/arm/omap.h"
#include "hw/sd/sdcard_legacy.h"
-typedef struct omap_mmc_s {
+typedef struct OMAPMMCState {
SysBusDevice parent_obj;
qemu_irq irq;
@@ -72,12 +72,12 @@ typedef struct omap_mmc_s {
qemu_irq cdet;
} OMAPMMCState;
-static void omap_mmc_interrupts_update(struct omap_mmc_s *s)
+static void omap_mmc_interrupts_update(OMAPMMCState *s)
{
qemu_set_irq(s->irq, !!(s->status & s->mask));
}
-static void omap_mmc_fifolevel_update(struct omap_mmc_s *host)
+static void omap_mmc_fifolevel_update(OMAPMMCState *host)
{
if (!host->transfer && !host->fifo_len) {
host->status &= 0xf3ff;
@@ -125,7 +125,7 @@ typedef enum {
SD_TYPE_ADTC = 3, /* addressed with data transfer */
} MMCCmdType;
-static void omap_mmc_command(struct omap_mmc_s *host, int cmd, int dir,
+static void omap_mmc_command(OMAPMMCState *host, int cmd, int dir,
MMCCmdType type, int busy,
sd_rsp_type_t resptype, int init)
{
@@ -234,7 +234,7 @@ static void omap_mmc_command(struct omap_mmc_s *host, int cmd, int dir,
host->status |= 0x0001;
}
-static void omap_mmc_transfer(struct omap_mmc_s *host)
+static void omap_mmc_transfer(OMAPMMCState *host)
{
uint8_t value;
@@ -289,19 +289,19 @@ static void omap_mmc_transfer(struct omap_mmc_s *host)
static void omap_mmc_update(void *opaque)
{
- struct omap_mmc_s *s = opaque;
+ OMAPMMCState *s = opaque;
omap_mmc_transfer(s);
omap_mmc_fifolevel_update(s);
omap_mmc_interrupts_update(s);
}
-static void omap_mmc_pseudo_reset(struct omap_mmc_s *host)
+static void omap_mmc_pseudo_reset(OMAPMMCState *host)
{
host->status = 0;
host->fifo_len = 0;
}
-static void omap_mmc_reset(struct omap_mmc_s *host)
+static void omap_mmc_reset(OMAPMMCState *host)
{
host->last_cmd = 0;
memset(host->rsp, 0, sizeof(host->rsp));
@@ -340,7 +340,7 @@ static void omap_mmc_reset(struct omap_mmc_s *host)
static uint64_t omap_mmc_read(void *opaque, hwaddr offset, unsigned size)
{
uint16_t i;
- struct omap_mmc_s *s = opaque;
+ OMAPMMCState *s = opaque;
if (size != 2) {
return omap_badwidth_read16(opaque, offset);
@@ -433,7 +433,7 @@ static void omap_mmc_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
int i;
- struct omap_mmc_s *s = opaque;
+ OMAPMMCState *s = opaque;
if (size != 2) {
omap_badwidth_write16(opaque, offset, value);
--
2.47.1
next prev parent reply other threads:[~2025-01-31 21:10 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-31 21:04 [PULL 00/36] Misc HW patches for 2025-01-31 Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 01/36] hw/rx/rx-gdbsim: Remove unnecessary uses of &first_cpu Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 02/36] hw/mips/loongson3_virt: Factor generic_cpu_reset() out Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 03/36] hw/mips/loongson3_virt: Invert vCPU creation order to remove &first_cpu Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 04/36] hw/mips/loongson3_virt: Have fw_conf_init() access local loaderparams Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 05/36] hw/mips/loongson3_virt: Pass CPU argument to get_cpu_freq_hz() Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 06/36] hw/mips/loongson3_bootp: Include missing headers Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 07/36] hw/mips/loongson3: Propagate cpu_count to init_loongson_params() Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 08/36] hw/mips/loongson3_virt: Propagate cpu_count to init_boot_param() Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 09/36] hw/mips/loongson3_bootp: Propagate processor_id to init_cpu_info() Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 10/36] hw/mips/loongson3_virt: Propagate processor_id to init_loongson_params() Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 11/36] hw/mips/loongson3_virt: Propagate %processor_id to init_boot_param() Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 12/36] hw/mips/loongson3_bootp: Move to common_ss[] Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 13/36] hw/irq: Introduce qemu_init_irqs() helper Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 14/36] hw/ipack: Clarify KConfig symbols Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 15/36] hw/ipack: Remove legacy qemu_allocate_irqs() use Philippe Mathieu-Daudé
2025-01-31 21:04 ` [PULL 16/36] hw/sh4/r2d: Convert legacy qemu_allocate_irqs() to qemu_init_irqs() Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 17/36] hw/char/pci-multi: Convert legacy qemu_allocate_irqs to qemu_init_irq Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 18/36] hw/misc/i2c-echo: add tracing Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 19/36] hw/usb/hcd-ehci: Fix debug printf format string Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 20/36] hw/avr/boot: Replace load_elf_ram_sym() -> load_elf_as() Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 21/36] hw/loader: Remove unused load_elf_ram() Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 22/36] hw/loader: Clarify local variable name in load_elf_ram_sym() Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 23/36] hw/loader: Pass ELFDATA endian order argument to load_elf_ram_sym() Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 24/36] hw/loader: Pass ELFDATA endian order argument to load_elf_as() Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 25/36] hw/loader: Pass ELFDATA endian order argument to load_elf() Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 26/36] hw/sd/omap_mmc: Do a minimal conversion to QDev Philippe Mathieu-Daudé
2025-01-31 21:05 ` Philippe Mathieu-Daudé [this message]
2025-01-31 21:05 ` [PULL 28/36] hw/sd/omap_mmc: Convert output qemu_irqs to gpio and sysbus IRQ APIs Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 29/36] hw/sd/omap_mmc: Convert to SDBus API Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 30/36] hw/sd/omap_mmc: Use similar API for "wire up omap_clk" to other OMAP devices Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 31/36] hw/arm/omap1: Inline creation of MMC Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 32/36] hw/sd/omap_mmc: Remove unused coverswitch qemu_irq Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 33/36] hw/sd/omap_mmc: Untabify Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 34/36] hw/sd: Remove unused 'enable' method from SDCardClass Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 35/36] hw/sd: Remove unused legacy functions, stop killing mammoths Philippe Mathieu-Daudé
2025-01-31 21:05 ` [PULL 36/36] hw/sd: Remove unused SDState::enable Philippe Mathieu-Daudé
2025-02-02 17:49 ` [PULL 00/36] Misc HW patches for 2025-01-31 Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250131210520.85874-28-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).