From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Subject: [PATCH v2 09/69] target/arm: Adjust exception flag handling for AH = 1
Date: Sat, 1 Feb 2025 16:39:12 +0000 [thread overview]
Message-ID: <20250201164012.1660228-10-peter.maydell@linaro.org> (raw)
In-Reply-To: <20250201164012.1660228-1-peter.maydell@linaro.org>
When FPCR.AH = 1, some of the cumulative exception flags in the FPSR
behave slightly differently for A64 operations:
* IDC is set when a denormal input is used without flushing
* IXC (Inexact) is set when an output denormal is flushed to zero
Update vfp_get_fpsr_from_host() to do this.
Note that because half-precision operations never set IDC, we now
need to add float_flag_input_denormal_used to the set we mask out of
fp_status_f16_a64.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/vfp_helper.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c
index 62005e19524..57100e95378 100644
--- a/target/arm/vfp_helper.c
+++ b/target/arm/vfp_helper.c
@@ -78,7 +78,7 @@ static void arm_set_ah_fp_behaviours(float_status *s)
#ifdef CONFIG_TCG
/* Convert host exception flags to vfp form. */
-static inline uint32_t vfp_exceptbits_from_host(int host_bits)
+static inline uint32_t vfp_exceptbits_from_host(int host_bits, bool ah)
{
uint32_t target_bits = 0;
@@ -100,6 +100,16 @@ static inline uint32_t vfp_exceptbits_from_host(int host_bits)
if (host_bits & float_flag_input_denormal_flushed) {
target_bits |= FPSR_IDC;
}
+ /*
+ * With FPCR.AH, IDC is set when an input denormal is used,
+ * and flushing an output denormal to zero sets both IXC and UFC.
+ */
+ if (ah && (host_bits & float_flag_input_denormal_used)) {
+ target_bits |= FPSR_IDC;
+ }
+ if (ah && (host_bits & float_flag_output_denormal_flushed)) {
+ target_bits |= FPSR_IXC;
+ }
return target_bits;
}
@@ -117,7 +127,7 @@ static uint32_t vfp_get_fpsr_from_host(CPUARMState *env)
a64_flags |= get_float_exception_flags(&env->vfp.fp_status_a64);
a64_flags |= (get_float_exception_flags(&env->vfp.fp_status_f16_a64)
- & ~float_flag_input_denormal_flushed);
+ & ~(float_flag_input_denormal_flushed | float_flag_input_denormal_used));
/*
* Flushing an input denormal *only* because FPCR.FIZ == 1 does
* not set FPSR.IDC; if FPCR.FZ is also set then this takes
@@ -129,7 +139,8 @@ static uint32_t vfp_get_fpsr_from_host(CPUARMState *env)
if ((env->vfp.fpcr & (FPCR_FZ | FPCR_AH)) != FPCR_FZ) {
a64_flags &= ~float_flag_input_denormal_flushed;
}
- return vfp_exceptbits_from_host(a32_flags | a64_flags);
+ return vfp_exceptbits_from_host(a64_flags, env->vfp.fpcr & FPCR_AH) |
+ vfp_exceptbits_from_host(a32_flags, false);
}
static void vfp_clear_float_status_exc_flags(CPUARMState *env)
--
2.34.1
next prev parent reply other threads:[~2025-02-01 16:42 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-01 16:39 [PATCH v2 00/69] target/arm: FEAT_AFP and FEAT_RPRES Peter Maydell
2025-02-01 16:39 ` [PATCH v2 01/69] target/i386: Do not raise Invalid for 0 * Inf + QNaN Peter Maydell
2025-02-01 16:39 ` [PATCH v2 02/69] tests/tcg/x86_64/fma: Test some x86 fused-multiply-add cases Peter Maydell
2025-02-01 16:39 ` [PATCH v2 03/69] fpu: Add float_class_denormal Peter Maydell
2025-02-01 16:39 ` [PATCH v2 04/69] fpu: Implement float_flag_input_denormal_used Peter Maydell
2025-02-02 16:45 ` Richard Henderson
2025-02-01 16:39 ` [PATCH v2 05/69] fpu: allow flushing of output denormals to be after rounding Peter Maydell
2025-02-02 16:50 ` Richard Henderson
2025-02-01 16:39 ` [PATCH v2 06/69] target/arm: Define FPCR AH, FIZ, NEP bits Peter Maydell
2025-02-02 16:51 ` Richard Henderson
2025-02-01 16:39 ` [PATCH v2 07/69] target/arm: Implement FPCR.FIZ handling Peter Maydell
2025-02-01 16:39 ` [PATCH v2 08/69] target/arm: Adjust FP behaviour for FPCR.AH = 1 Peter Maydell
2025-02-11 13:17 ` Peter Maydell
2025-02-01 16:39 ` Peter Maydell [this message]
2025-02-01 16:39 ` [PATCH v2 10/69] target/arm: Add FPCR.AH to tbflags Peter Maydell
2025-02-01 16:39 ` [PATCH v2 11/69] target/arm: Set up float_status to use for FPCR.AH=1 behaviour Peter Maydell
2025-02-01 16:39 ` [PATCH v2 12/69] target/arm: Use FPST_FPCR_AH for FRECPE, FRECPS, FRECPX, FRSQRTE, FRSQRTS Peter Maydell
2025-02-01 16:39 ` [PATCH v2 13/69] target/arm: Use FPST_FPCR_AH for BFCVT* insns Peter Maydell
2025-02-01 16:39 ` [PATCH v2 14/69] target/arm: Use FPST_FPCR_AH for BFMLAL*, BFMLSL* insns Peter Maydell
2025-02-01 16:39 ` [PATCH v2 15/69] target/arm: Add FPCR.NEP to TBFLAGS Peter Maydell
2025-02-01 16:39 ` [PATCH v2 16/69] target/arm: Define and use new write_fp_*reg_merging() functions Peter Maydell
2025-02-01 16:39 ` [PATCH v2 17/69] target/arm: Handle FPCR.NEP for 3-input scalar operations Peter Maydell
2025-02-01 16:39 ` [PATCH v2 18/69] target/arm: Handle FPCR.NEP for BFCVT scalar Peter Maydell
2025-02-01 16:39 ` [PATCH v2 19/69] target/arm: Handle FPCR.NEP for 1-input scalar operations Peter Maydell
2025-02-01 16:39 ` [PATCH v2 20/69] target/arm: Handle FPCR.NEP in do_cvtf_scalar() Peter Maydell
2025-02-01 16:39 ` [PATCH v2 21/69] target/arm: Handle FPCR.NEP for scalar FABS and FNEG Peter Maydell
2025-02-01 16:39 ` [PATCH v2 22/69] target/arm: Handle FPCR.NEP for FCVTXN (scalar) Peter Maydell
2025-02-01 16:39 ` [PATCH v2 23/69] target/arm: Handle FPCR.NEP for NEP for FMUL, FMULX scalar by element Peter Maydell
2025-02-01 16:39 ` [PATCH v2 24/69] target/arm: Implement FPCR.AH semantics for scalar FMIN/FMAX Peter Maydell
2025-02-01 16:39 ` [PATCH v2 25/69] target/arm: Implement FPCR.AH semantics for vector FMIN/FMAX Peter Maydell
2025-02-01 16:39 ` [PATCH v2 26/69] target/arm: Implement FPCR.AH semantics for FMAXV and FMINV Peter Maydell
2025-02-01 16:39 ` [PATCH v2 27/69] target/arm: Implement FPCR.AH semantics for FMINP and FMAXP Peter Maydell
2025-02-01 16:39 ` [PATCH v2 28/69] target/arm: Implement FPCR.AH semantics for SVE FMAXV and FMINV Peter Maydell
2025-02-01 16:39 ` [PATCH v2 29/69] target/arm: Implement FPCR.AH semantics for SVE FMIN/FMAX immediate Peter Maydell
2025-02-01 16:39 ` [PATCH v2 30/69] target/arm: Implement FPCR.AH semantics for SVE FMIN/FMAX vector Peter Maydell
2025-02-01 16:39 ` [PATCH v2 31/69] target/arm: Implement FPCR.AH handling of negation of NaN Peter Maydell
2025-02-01 16:39 ` [PATCH v2 32/69] target/arm: Implement FPCR.AH handling for scalar FABS and FABD Peter Maydell
2025-02-01 16:39 ` [PATCH v2 33/69] target/arm: Handle FPCR.AH in vector FABD Peter Maydell
2025-02-01 16:39 ` [PATCH v2 34/69] target/arm: Handle FPCR.AH in SVE FNEG Peter Maydell
2025-02-01 16:39 ` [PATCH v2 35/69] target/arm: Handle FPCR.AH in SVE FABS Peter Maydell
2025-02-01 16:39 ` [PATCH v2 36/69] target/arm: Handle FPCR.AH in SVE FABD Peter Maydell
2025-02-01 16:39 ` [PATCH v2 37/69] target/arm: Handle FPCR.AH in negation steps in SVE FCADD Peter Maydell
2025-02-02 17:17 ` Richard Henderson
2025-02-01 16:39 ` [PATCH v2 38/69] target/arm: Handle FPCR.AH in negation steps in FCADD Peter Maydell
2025-02-01 16:39 ` [PATCH v2 39/69] target/arm: Handle FPCR.AH in FRECPS and FRSQRTS scalar insns Peter Maydell
2025-02-01 16:39 ` [PATCH v2 40/69] target/arm: Handle FPCR.AH in FRECPS and FRSQRTS vector insns Peter Maydell
2025-02-01 16:39 ` [PATCH v2 41/69] target/arm: Handle FPCR.AH in negation step in FMLS (indexed) Peter Maydell
2025-02-01 16:39 ` [PATCH v2 42/69] target/arm: Handle FPCR.AH in negation in FMLS (vector) Peter Maydell
2025-02-01 16:39 ` [PATCH v2 43/69] target/arm: Handle FPCR.AH in negation step in SVE " Peter Maydell
2025-02-01 16:39 ` [PATCH v2 44/69] target/arm: Handle FPCR.AH in SVE FTSSEL Peter Maydell
2025-02-01 16:39 ` [PATCH v2 45/69] target/arm: Handle FPCR.AH in SVE FTMAD Peter Maydell
2025-02-01 16:39 ` [PATCH v2 46/69] target/arm: Handle FPCR.AH in vector FCMLA Peter Maydell
2025-02-01 16:39 ` [PATCH v2 47/69] target/arm: Handle FPCR.AH in FCMLA by index Peter Maydell
2025-02-01 16:39 ` [PATCH v2 48/69] target/arm: Handle FPCR.AH in SVE FCMLA Peter Maydell
2025-02-01 16:39 ` [PATCH v2 49/69] target/arm: Handle FPCR.AH in FMLSL (by element and vector) Peter Maydell
2025-02-01 16:39 ` [PATCH v2 50/69] target/arm: Handle FPCR.AH in SVE FMLSL (indexed) Peter Maydell
2025-02-01 16:39 ` [PATCH v2 51/69] target/arm: Handle FPCR.AH in SVE FMLSLB, FMLSLT (vectors) Peter Maydell
2025-02-01 16:39 ` [PATCH v2 52/69] target/arm: Enable FEAT_AFP for '-cpu max' Peter Maydell
2025-02-01 16:39 ` [PATCH v2 53/69] target/arm: Plumb FEAT_RPRES frecpe and frsqrte through to new helper Peter Maydell
2025-02-01 16:39 ` [PATCH v2 54/69] target/arm: Implement increased precision FRECPE Peter Maydell
2025-02-01 16:39 ` [PATCH v2 55/69] target/arm: Implement increased precision FRSQRTE Peter Maydell
2025-02-01 16:39 ` [PATCH v2 56/69] target/arm: Enable FEAT_RPRES for -cpu max Peter Maydell
2025-02-01 16:40 ` [PATCH v2 57/69] target/arm: Introduce CPUARMState.vfp.fp_status[] Peter Maydell
2025-02-01 16:40 ` [PATCH v2 58/69] target/arm: Remove standard_fp_status_f16 Peter Maydell
2025-02-01 16:40 ` [PATCH v2 59/69] target/arm: Remove standard_fp_status Peter Maydell
2025-02-01 16:40 ` [PATCH v2 60/69] target/arm: Remove ah_fp_status_f16 Peter Maydell
2025-02-01 16:40 ` [PATCH v2 61/69] target/arm: Remove ah_fp_status Peter Maydell
2025-02-01 16:40 ` [PATCH v2 62/69] target/arm: Remove fp_status_f16_a64 Peter Maydell
2025-02-01 16:40 ` [PATCH v2 63/69] target/arm: Remove fp_status_f16_a32 Peter Maydell
2025-02-01 16:40 ` [PATCH v2 64/69] target/arm: Remove fp_status_a64 Peter Maydell
2025-02-01 16:40 ` [PATCH v2 65/69] target/arm: Remove fp_status_a32 Peter Maydell
2025-02-01 16:40 ` [PATCH v2 66/69] target/arm: Simplify fp_status indexing in mve_helper.c Peter Maydell
2025-02-01 16:40 ` [PATCH v2 67/69] target/arm: Simplify DO_VFP_cmp in vfp_helper.c Peter Maydell
2025-02-01 16:40 ` [PATCH v2 68/69] target/arm: Read fz16 from env->vfp.fpcr Peter Maydell
2025-02-01 16:40 ` [PATCH v2 69/69] target/arm: Sink fp_status and fpcr access into do_fmlal* Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250201164012.1660228-10-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).