qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Thomas Huth" <thuth@redhat.com>,
	"Richard Henderson" <richard.henderson@linaro.org>
Subject: [PULL 03/32] hw/net/xilinx_ethlite: Make device endianness configurable
Date: Mon, 10 Feb 2025 21:41:35 +0100	[thread overview]
Message-ID: <20250210204204.54407-4-philmd@linaro.org> (raw)
In-Reply-To: <20250210204204.54407-1-philmd@linaro.org>

Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair
of DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "little-endian" property to select the device
endianness, defaulting to little endian.
Set the proper endianness on the single machine using the
device.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250206131052.30207-3-philmd@linaro.org>
---
 hw/microblaze/petalogix_s3adsp1800_mmu.c |  1 +
 hw/net/xilinx_ethlite.c                  | 20 ++++++++++++++------
 2 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/hw/microblaze/petalogix_s3adsp1800_mmu.c b/hw/microblaze/petalogix_s3adsp1800_mmu.c
index 0506497ad0a..fbf52ba8f2f 100644
--- a/hw/microblaze/petalogix_s3adsp1800_mmu.c
+++ b/hw/microblaze/petalogix_s3adsp1800_mmu.c
@@ -121,6 +121,7 @@ petalogix_s3adsp1800_init(MachineState *machine)
     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
 
     dev = qdev_new("xlnx.xps-ethernetlite");
+    qdev_prop_set_bit(dev, "little-endian", !TARGET_BIG_ENDIAN);
     qemu_configure_nic_device(dev, true, NULL);
     qdev_prop_set_uint32(dev, "tx-ping-pong", 0);
     qdev_prop_set_uint32(dev, "rx-ping-pong", 0);
diff --git a/hw/net/xilinx_ethlite.c b/hw/net/xilinx_ethlite.c
index 14bf2b2e17a..103e53831a7 100644
--- a/hw/net/xilinx_ethlite.c
+++ b/hw/net/xilinx_ethlite.c
@@ -90,6 +90,7 @@ struct XlnxXpsEthLite
     NICState *nic;
     NICConf conf;
 
+    bool little_endian_model;
     uint32_t c_tx_pingpong;
     uint32_t c_rx_pingpong;
     unsigned int port_index; /* dual port RAM index */
@@ -183,10 +184,10 @@ static void port_tx_write(void *opaque, hwaddr addr, uint64_t value,
     }
 }
 
-static const MemoryRegionOps eth_porttx_ops = {
+static const MemoryRegionOps eth_porttx_ops[2] = {
+    [0 ... 1] = {
         .read = port_tx_read,
         .write = port_tx_write,
-        .endianness = DEVICE_NATIVE_ENDIAN,
         .impl = {
             .min_access_size = 4,
             .max_access_size = 4,
@@ -195,6 +196,9 @@ static const MemoryRegionOps eth_porttx_ops = {
             .min_access_size = 4,
             .max_access_size = 4,
         },
+    },
+    [0].endianness = DEVICE_BIG_ENDIAN,
+    [1].endianness = DEVICE_LITTLE_ENDIAN,
 };
 
 static uint64_t port_rx_read(void *opaque, hwaddr addr, unsigned int size)
@@ -232,10 +236,10 @@ static void port_rx_write(void *opaque, hwaddr addr, uint64_t value,
     }
 }
 
-static const MemoryRegionOps eth_portrx_ops = {
+static const MemoryRegionOps eth_portrx_ops[2] = {
+    [0 ... 1] = {
         .read = port_rx_read,
         .write = port_rx_write,
-        .endianness = DEVICE_NATIVE_ENDIAN,
         .impl = {
             .min_access_size = 4,
             .max_access_size = 4,
@@ -244,6 +248,9 @@ static const MemoryRegionOps eth_portrx_ops = {
             .min_access_size = 4,
             .max_access_size = 4,
         },
+    },
+    [0].endianness = DEVICE_BIG_ENDIAN,
+    [1].endianness = DEVICE_LITTLE_ENDIAN,
 };
 
 static bool eth_can_rx(NetClientState *nc)
@@ -328,7 +335,7 @@ static void xilinx_ethlite_realize(DeviceState *dev, Error **errp)
                                BUFSZ_MAX, &error_abort);
         memory_region_add_subregion(&s->container, 0x0800 * i, &s->port[i].txbuf);
         memory_region_init_io(&s->port[i].txio, OBJECT(dev),
-                              &eth_porttx_ops, s,
+                              &eth_porttx_ops[s->little_endian_model], s,
                               i ? "ethlite.tx[1]io" : "ethlite.tx[0]io",
                               4 * TX_MAX);
         memory_region_add_subregion(&s->container, i ? A_TX_BASE1 : A_TX_BASE0,
@@ -340,7 +347,7 @@ static void xilinx_ethlite_realize(DeviceState *dev, Error **errp)
         memory_region_add_subregion(&s->container, 0x1000 + 0x0800 * i,
                                     &s->port[i].rxbuf);
         memory_region_init_io(&s->port[i].rxio, OBJECT(dev),
-                              &eth_portrx_ops, s,
+                              &eth_portrx_ops[s->little_endian_model], s,
                               i ? "ethlite.rx[1]io" : "ethlite.rx[0]io",
                               4 * RX_MAX);
         memory_region_add_subregion(&s->container, i ? A_RX_BASE1 : A_RX_BASE0,
@@ -363,6 +370,7 @@ static void xilinx_ethlite_init(Object *obj)
 }
 
 static const Property xilinx_ethlite_properties[] = {
+    DEFINE_PROP_BOOL("little-endian", XlnxXpsEthLite, little_endian_model, true),
     DEFINE_PROP_UINT32("tx-ping-pong", XlnxXpsEthLite, c_tx_pingpong, 1),
     DEFINE_PROP_UINT32("rx-ping-pong", XlnxXpsEthLite, c_rx_pingpong, 1),
     DEFINE_NIC_PROPERTIES(XlnxXpsEthLite, conf),
-- 
2.47.1



  parent reply	other threads:[~2025-02-10 20:44 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-10 20:41 [PULL 00/32] Misc HW patches for 2025-02-10 Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 01/32] backends/tpm: Use qemu_hexdump_line() to avoid sprintf() Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 02/32] hw/intc/xilinx_intc: Make device endianness configurable Philippe Mathieu-Daudé
2025-02-10 20:41 ` Philippe Mathieu-Daudé [this message]
2025-02-10 20:41 ` [PULL 04/32] hw/timer/xilinx_timer: " Philippe Mathieu-Daudé
2025-02-12  8:27   ` Thomas Huth
2025-02-12  9:19     ` Philippe Mathieu-Daudé
2025-02-12  9:34       ` Philippe Mathieu-Daudé
2025-02-12  9:55         ` Philippe Mathieu-Daudé
2025-02-12 10:24       ` Thomas Huth
2025-02-12 11:45         ` Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 05/32] hw/char/xilinx_uartlite: " Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 06/32] hw/ssi/xilinx_spi: " Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 07/32] hw/arm/xlnx-zynqmp: Use &error_abort for programming errors Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 08/32] hw/intc/apic: Fixes magic number use, removes outdated comment Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 09/32] hw/core/machine: Reject thread level cache Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 10/32] hw/sysbus: Use sizeof(BusState) in main_system_bus_create() Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 11/32] hw/sysbus: Declare QOM types using DEFINE_TYPES() macro Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 12/32] hw/sysbus: Introduce TYPE_DYNAMIC_SYS_BUS_DEVICE Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 13/32] hw/vfio: Have VFIO_PLATFORM devices inherit from DYNAMIC_SYS_BUS_DEVICE Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 14/32] hw/display: Have RAMFB device " Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 15/32] hw/i386: Have X86_IOMMU devices " Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 16/32] hw/net: Have eTSEC device " Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 17/32] hw/tpm: Have TPM TIS sysbus " Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 18/32] hw/xen: Prefer QOM cast for XenLegacyDevice Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 19/32] hw/xen: Have legacy Xen backend inherit from DYNAMIC_SYS_BUS_DEVICE Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 20/32] hw/boards: Convert no_sdcard flag to OnOffAuto tri-state Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 21/32] hw/boards: Explicit no_sdcard=false as ON_OFF_AUTO_OFF Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 22/32] hw/boards: Rename no_sdcard -> auto_create_sdcard Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 23/32] hw/boards: Do not create unusable default if=sd drives Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 24/32] hw/arm: Remove all invalid uses of auto_create_sdcard=true Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 25/32] hw/riscv: " Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 26/32] hw/boards: Ensure machine setting auto_create_sdcard expose a SD Bus Philippe Mathieu-Daudé
2025-02-10 20:41 ` [PULL 27/32] tests/functional: Explicit endianness of microblaze assets Philippe Mathieu-Daudé
2025-02-10 20:42 ` [PULL 28/32] tests/functional: Allow microblaze tests to take a machine name argument Philippe Mathieu-Daudé
2025-02-10 20:42 ` [PULL 29/32] tests/functional: Remove sleep() kludges from microblaze tests Philippe Mathieu-Daudé
2025-02-10 20:42 ` [PULL 30/32] tests/functional: Have microblaze tests inherit common parent class Philippe Mathieu-Daudé
2025-02-10 20:42 ` [PULL 31/32] hw/riscv/opentitan: Include missing 'exec/address-spaces.h' header Philippe Mathieu-Daudé
2025-02-10 20:42 ` [PULL 32/32] hw/net/smc91c111: Ignore attempt to pop from empty RX fifo Philippe Mathieu-Daudé
2025-02-11 18:26 ` [PULL 00/32] Misc HW patches for 2025-02-10 Stefan Hajnoczi
2025-02-11 18:48   ` Philippe Mathieu-Daudé
2025-02-11 18:53     ` Philippe Mathieu-Daudé
2025-02-11 19:03       ` Philippe Mathieu-Daudé
2025-02-12  0:41         ` Thomas Huth
2025-02-12  1:39           ` Thomas Huth
2025-02-12  4:45             ` Eldon Stegall
2025-02-12 19:31               ` Thomas Huth
2025-02-12  0:31       ` Thomas Huth
2025-02-12  9:10       ` Daniel P. Berrangé
2025-02-12 11:57         ` Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250210204204.54407-4-philmd@linaro.org \
    --to=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).