qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 03/68] fpu: Implement float_flag_input_denormal_used
Date: Tue, 11 Feb 2025 16:24:49 +0000	[thread overview]
Message-ID: <20250211162554.4135349-4-peter.maydell@linaro.org> (raw)
In-Reply-To: <20250211162554.4135349-1-peter.maydell@linaro.org>

For the x86 and the Arm FEAT_AFP semantics, we need to be able to
tell the target code that the FPU operation has used an input
denormal.  Implement this; when it happens we set the new
float_flag_denormal_input_used.

Note that we only set this when an input denormal is actually used by
the operation: if the operation results in Invalid Operation or
Divide By Zero or the result is a NaN because some other input was a
NaN then we never needed to look at the input denormal and do not set
denormal_input_used.

We mostly do not need to adjust the hardfloat codepaths to deal with
this flag, because almost all hardfloat operations are already gated
on the input not being a denormal, and will fall back to softfloat
for a denormal input.  The only exception is the comparison
operations, where we need to add the check for input denormals, which
must now fall back to softfloat where they did not before.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 include/fpu/softfloat-types.h |  7 ++++
 fpu/softfloat.c               | 38 +++++++++++++++++---
 fpu/softfloat-parts.c.inc     | 68 ++++++++++++++++++++++++++++++++++-
 3 files changed, 107 insertions(+), 6 deletions(-)

diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h
index 2e43d1dd9e6..bba1c397bb7 100644
--- a/include/fpu/softfloat-types.h
+++ b/include/fpu/softfloat-types.h
@@ -165,6 +165,13 @@ enum {
     float_flag_invalid_sqrt    = 0x0800,  /* sqrt(-x) */
     float_flag_invalid_cvti    = 0x1000,  /* non-nan to integer */
     float_flag_invalid_snan    = 0x2000,  /* any operand was snan */
+    /*
+     * An input was denormal and we used it (without flushing it to zero).
+     * Not set if we do not actually use the denormal input (e.g.
+     * because some other input was a NaN, or because the operation
+     * wasn't actually carried out (divide-by-zero; invalid))
+     */
+    float_flag_input_denormal_used = 0x4000,
 };
 
 /*
diff --git a/fpu/softfloat.c b/fpu/softfloat.c
index 03a604c38ec..f4fed9bfda9 100644
--- a/fpu/softfloat.c
+++ b/fpu/softfloat.c
@@ -2718,8 +2718,10 @@ static void parts_float_to_ahp(FloatParts64 *a, float_status *s)
                                   float16_params_ahp.frac_size + 1);
         break;
 
-    case float_class_normal:
     case float_class_denormal:
+        float_raise(float_flag_input_denormal_used, s);
+        break;
+    case float_class_normal:
     case float_class_zero:
         break;
 
@@ -2733,6 +2735,9 @@ static void parts64_float_to_float(FloatParts64 *a, float_status *s)
     if (is_nan(a->cls)) {
         parts_return_nan(a, s);
     }
+    if (a->cls == float_class_denormal) {
+        float_raise(float_flag_input_denormal_used, s);
+    }
 }
 
 static void parts128_float_to_float(FloatParts128 *a, float_status *s)
@@ -2740,6 +2745,9 @@ static void parts128_float_to_float(FloatParts128 *a, float_status *s)
     if (is_nan(a->cls)) {
         parts_return_nan(a, s);
     }
+    if (a->cls == float_class_denormal) {
+        float_raise(float_flag_input_denormal_used, s);
+    }
 }
 
 #define parts_float_to_float(P, S) \
@@ -2752,12 +2760,21 @@ static void parts_float_to_float_narrow(FloatParts64 *a, FloatParts128 *b,
     a->sign = b->sign;
     a->exp = b->exp;
 
-    if (is_anynorm(a->cls)) {
+    switch (a->cls) {
+    case float_class_denormal:
+        float_raise(float_flag_input_denormal_used, s);
+        /* fall through */
+    case float_class_normal:
         frac_truncjam(a, b);
-    } else if (is_nan(a->cls)) {
+        break;
+    case float_class_snan:
+    case float_class_qnan:
         /* Discard the low bits of the NaN. */
         a->frac = b->frac_hi;
         parts_return_nan(a, s);
+        break;
+    default:
+        break;
     }
 }
 
@@ -2772,6 +2789,9 @@ static void parts_float_to_float_widen(FloatParts128 *a, FloatParts64 *b,
     if (is_nan(a->cls)) {
         parts_return_nan(a, s);
     }
+    if (a->cls == float_class_denormal) {
+        float_raise(float_flag_input_denormal_used, s);
+    }
 }
 
 float32 float16_to_float32(float16 a, bool ieee, float_status *s)
@@ -4411,7 +4431,11 @@ float32_hs_compare(float32 xa, float32 xb, float_status *s, bool is_quiet)
         goto soft;
     }
 
-    float32_input_flush2(&ua.s, &ub.s, s);
+    if (unlikely(float32_is_denormal(ua.s) || float32_is_denormal(ub.s))) {
+        /* We may need to set the input_denormal_used flag */
+        goto soft;
+    }
+
     if (isgreaterequal(ua.h, ub.h)) {
         if (isgreater(ua.h, ub.h)) {
             return float_relation_greater;
@@ -4461,7 +4485,11 @@ float64_hs_compare(float64 xa, float64 xb, float_status *s, bool is_quiet)
         goto soft;
     }
 
-    float64_input_flush2(&ua.s, &ub.s, s);
+    if (unlikely(float64_is_denormal(ua.s) || float64_is_denormal(ub.s))) {
+        /* We may need to set the input_denormal_used flag */
+        goto soft;
+    }
+
     if (isgreaterequal(ua.h, ub.h)) {
         if (isgreater(ua.h, ub.h)) {
             return float_relation_greater;
diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc
index 8621cb87185..0122b35008a 100644
--- a/fpu/softfloat-parts.c.inc
+++ b/fpu/softfloat-parts.c.inc
@@ -433,6 +433,15 @@ static FloatPartsN *partsN(addsub)(FloatPartsN *a, FloatPartsN *b,
     bool b_sign = b->sign ^ subtract;
     int ab_mask = float_cmask(a->cls) | float_cmask(b->cls);
 
+    /*
+     * For addition and subtraction, we will consume an
+     * input denormal unless the other input is a NaN.
+     */
+    if ((ab_mask & (float_cmask_denormal | float_cmask_anynan)) ==
+        float_cmask_denormal) {
+        float_raise(float_flag_input_denormal_used, s);
+    }
+
     if (a->sign != b_sign) {
         /* Subtraction */
         if (likely(cmask_is_only_normals(ab_mask))) {
@@ -516,6 +525,10 @@ static FloatPartsN *partsN(mul)(FloatPartsN *a, FloatPartsN *b,
     if (likely(cmask_is_only_normals(ab_mask))) {
         FloatPartsW tmp;
 
+        if (ab_mask & float_cmask_denormal) {
+            float_raise(float_flag_input_denormal_used, s);
+        }
+
         frac_mulw(&tmp, a, b);
         frac_truncjam(a, &tmp);
 
@@ -541,6 +554,10 @@ static FloatPartsN *partsN(mul)(FloatPartsN *a, FloatPartsN *b,
     }
 
     /* Multiply by 0 or Inf */
+    if (ab_mask & float_cmask_denormal) {
+        float_raise(float_flag_input_denormal_used, s);
+    }
+
     if (ab_mask & float_cmask_inf) {
         a->cls = float_class_inf;
         a->sign = sign;
@@ -664,6 +681,16 @@ static FloatPartsN *partsN(muladd_scalbn)(FloatPartsN *a, FloatPartsN *b,
     if (flags & float_muladd_negate_result) {
         a->sign ^= 1;
     }
+
+    /*
+     * All result types except for "return the default NaN
+     * because this is an Invalid Operation" go through here;
+     * this matches the set of cases where we consumed a
+     * denormal input.
+     */
+    if (abc_mask & float_cmask_denormal) {
+        float_raise(float_flag_input_denormal_used, s);
+    }
     return a;
 
  return_sub_zero:
@@ -693,6 +720,9 @@ static FloatPartsN *partsN(div)(FloatPartsN *a, FloatPartsN *b,
     bool sign = a->sign ^ b->sign;
 
     if (likely(cmask_is_only_normals(ab_mask))) {
+        if (ab_mask & float_cmask_denormal) {
+            float_raise(float_flag_input_denormal_used, s);
+        }
         a->sign = sign;
         a->exp -= b->exp + frac_div(a, b);
         return a;
@@ -713,6 +743,10 @@ static FloatPartsN *partsN(div)(FloatPartsN *a, FloatPartsN *b,
         return parts_pick_nan(a, b, s);
     }
 
+    if ((ab_mask & float_cmask_denormal) && b->cls != float_class_zero) {
+        float_raise(float_flag_input_denormal_used, s);
+    }
+
     a->sign = sign;
 
     /* Inf / X */
@@ -751,6 +785,9 @@ static FloatPartsN *partsN(modrem)(FloatPartsN *a, FloatPartsN *b,
     int ab_mask = float_cmask(a->cls) | float_cmask(b->cls);
 
     if (likely(cmask_is_only_normals(ab_mask))) {
+        if (ab_mask & float_cmask_denormal) {
+            float_raise(float_flag_input_denormal_used, s);
+        }
         frac_modrem(a, b, mod_quot);
         return a;
     }
@@ -771,6 +808,10 @@ static FloatPartsN *partsN(modrem)(FloatPartsN *a, FloatPartsN *b,
         return a;
     }
 
+    if (ab_mask & float_cmask_denormal) {
+        float_raise(float_flag_input_denormal_used, s);
+    }
+
     /* N % Inf; 0 % N */
     g_assert(b->cls == float_class_inf || a->cls == float_class_zero);
     return a;
@@ -801,6 +842,10 @@ static void partsN(sqrt)(FloatPartsN *a, float_status *status,
     if (unlikely(a->cls != float_class_normal)) {
         switch (a->cls) {
         case float_class_denormal:
+            if (!a->sign) {
+                /* -ve denormal will be InvalidOperation */
+                float_raise(float_flag_input_denormal_used, status);
+            }
             break;
         case float_class_snan:
         case float_class_qnan:
@@ -1431,6 +1476,9 @@ static FloatPartsN *partsN(minmax)(FloatPartsN *a, FloatPartsN *b,
         if ((flags & (minmax_isnum | minmax_isnumber))
             && !(ab_mask & float_cmask_snan)
             && (ab_mask & ~float_cmask_qnan)) {
+            if (ab_mask & float_cmask_denormal) {
+                float_raise(float_flag_input_denormal_used, s);
+            }
             return is_nan(a->cls) ? b : a;
         }
 
@@ -1455,6 +1503,10 @@ static FloatPartsN *partsN(minmax)(FloatPartsN *a, FloatPartsN *b,
         return parts_pick_nan(a, b, s);
     }
 
+    if (ab_mask & float_cmask_denormal) {
+        float_raise(float_flag_input_denormal_used, s);
+    }
+
     a_exp = a->exp;
     b_exp = b->exp;
 
@@ -1524,6 +1576,10 @@ static FloatRelation partsN(compare)(FloatPartsN *a, FloatPartsN *b,
     if (likely(cmask_is_only_normals(ab_mask))) {
         FloatRelation cmp;
 
+        if (ab_mask & float_cmask_denormal) {
+            float_raise(float_flag_input_denormal_used, s);
+        }
+
         if (a->sign != b->sign) {
             goto a_sign;
         }
@@ -1549,6 +1605,10 @@ static FloatRelation partsN(compare)(FloatPartsN *a, FloatPartsN *b,
         return float_relation_unordered;
     }
 
+    if (ab_mask & float_cmask_denormal) {
+        float_raise(float_flag_input_denormal_used, s);
+    }
+
     if (ab_mask & float_cmask_zero) {
         if (ab_mask == float_cmask_zero) {
             return float_relation_equal;
@@ -1588,8 +1648,10 @@ static void partsN(scalbn)(FloatPartsN *a, int n, float_status *s)
     case float_class_zero:
     case float_class_inf:
         break;
-    case float_class_normal:
     case float_class_denormal:
+        float_raise(float_flag_input_denormal_used, s);
+        /* fall through */
+    case float_class_normal:
         a->exp += MIN(MAX(n, -0x10000), 0x10000);
         break;
     default:
@@ -1609,6 +1671,10 @@ static void partsN(log2)(FloatPartsN *a, float_status *s, const FloatFmt *fmt)
     if (unlikely(a->cls != float_class_normal)) {
         switch (a->cls) {
         case float_class_denormal:
+            if (!a->sign) {
+                /* -ve denormal will be InvalidOperation */
+                float_raise(float_flag_input_denormal_used, s);
+            }
             break;
         case float_class_snan:
         case float_class_qnan:
-- 
2.34.1



  parent reply	other threads:[~2025-02-11 16:28 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-11 16:24 [PULL 00/68] target-arm queue Peter Maydell
2025-02-11 16:24 ` [PULL 01/68] target/alpha: Don't corrupt error_code with unknown softfloat flags Peter Maydell
2025-02-11 16:24 ` [PULL 02/68] fpu: Add float_class_denormal Peter Maydell
2025-02-11 16:24 ` Peter Maydell [this message]
2025-02-11 16:24 ` [PULL 04/68] fpu: allow flushing of output denormals to be after rounding Peter Maydell
2025-02-11 16:24 ` [PULL 05/68] target/arm: Define FPCR AH, FIZ, NEP bits Peter Maydell
2025-02-11 16:24 ` [PULL 06/68] target/arm: Implement FPCR.FIZ handling Peter Maydell
2025-02-11 16:24 ` [PULL 07/68] target/arm: Adjust FP behaviour for FPCR.AH = 1 Peter Maydell
2025-02-11 16:24 ` [PULL 08/68] target/arm: Adjust exception flag handling for AH " Peter Maydell
2025-02-11 16:24 ` [PULL 09/68] target/arm: Add FPCR.AH to tbflags Peter Maydell
2025-02-11 16:24 ` [PULL 10/68] target/arm: Set up float_status to use for FPCR.AH=1 behaviour Peter Maydell
2025-02-11 16:24 ` [PULL 11/68] target/arm: Use FPST_FPCR_AH for FRECPE, FRECPS, FRECPX, FRSQRTE, FRSQRTS Peter Maydell
2025-02-11 16:24 ` [PULL 12/68] target/arm: Use FPST_FPCR_AH for BFCVT* insns Peter Maydell
2025-02-11 16:24 ` [PULL 13/68] target/arm: Use FPST_FPCR_AH for BFMLAL*, BFMLSL* insns Peter Maydell
2025-02-11 16:25 ` [PULL 14/68] target/arm: Add FPCR.NEP to TBFLAGS Peter Maydell
2025-02-11 16:25 ` [PULL 15/68] target/arm: Define and use new write_fp_*reg_merging() functions Peter Maydell
2025-02-11 16:25 ` [PULL 16/68] target/arm: Handle FPCR.NEP for 3-input scalar operations Peter Maydell
2025-02-11 16:25 ` [PULL 17/68] target/arm: Handle FPCR.NEP for BFCVT scalar Peter Maydell
2025-02-11 16:25 ` [PULL 18/68] target/arm: Handle FPCR.NEP for 1-input scalar operations Peter Maydell
2025-02-11 16:25 ` [PULL 19/68] target/arm: Handle FPCR.NEP in do_cvtf_scalar() Peter Maydell
2025-02-11 16:25 ` [PULL 20/68] target/arm: Handle FPCR.NEP for scalar FABS and FNEG Peter Maydell
2025-02-11 16:25 ` [PULL 21/68] target/arm: Handle FPCR.NEP for FCVTXN (scalar) Peter Maydell
2025-02-11 16:25 ` [PULL 22/68] target/arm: Handle FPCR.NEP for NEP for FMUL, FMULX scalar by element Peter Maydell
2025-02-11 16:25 ` [PULL 23/68] target/arm: Implement FPCR.AH semantics for scalar FMIN/FMAX Peter Maydell
2025-02-11 16:25 ` [PULL 24/68] target/arm: Implement FPCR.AH semantics for vector FMIN/FMAX Peter Maydell
2025-02-11 16:25 ` [PULL 25/68] target/arm: Implement FPCR.AH semantics for FMAXV and FMINV Peter Maydell
2025-02-11 16:25 ` [PULL 26/68] target/arm: Implement FPCR.AH semantics for FMINP and FMAXP Peter Maydell
2025-02-11 16:25 ` [PULL 27/68] target/arm: Implement FPCR.AH semantics for SVE FMAXV and FMINV Peter Maydell
2025-02-11 16:25 ` [PULL 28/68] target/arm: Implement FPCR.AH semantics for SVE FMIN/FMAX immediate Peter Maydell
2025-02-11 16:25 ` [PULL 29/68] target/arm: Implement FPCR.AH semantics for SVE FMIN/FMAX vector Peter Maydell
2025-02-11 16:25 ` [PULL 30/68] target/arm: Implement FPCR.AH handling of negation of NaN Peter Maydell
2025-02-11 16:25 ` [PULL 31/68] target/arm: Implement FPCR.AH handling for scalar FABS and FABD Peter Maydell
2025-02-11 16:25 ` [PULL 32/68] target/arm: Handle FPCR.AH in vector FABD Peter Maydell
2025-02-11 16:25 ` [PULL 33/68] target/arm: Handle FPCR.AH in SVE FNEG Peter Maydell
2025-02-11 16:25 ` [PULL 34/68] target/arm: Handle FPCR.AH in SVE FABS Peter Maydell
2025-02-11 16:25 ` [PULL 35/68] target/arm: Handle FPCR.AH in SVE FABD Peter Maydell
2025-02-11 16:25 ` [PULL 36/68] target/arm: Handle FPCR.AH in negation steps in SVE FCADD Peter Maydell
2025-02-11 16:25 ` [PULL 37/68] target/arm: Handle FPCR.AH in negation steps in FCADD Peter Maydell
2025-02-11 16:25 ` [PULL 38/68] target/arm: Handle FPCR.AH in FRECPS and FRSQRTS scalar insns Peter Maydell
2025-02-11 16:25 ` [PULL 39/68] target/arm: Handle FPCR.AH in FRECPS and FRSQRTS vector insns Peter Maydell
2025-02-11 16:25 ` [PULL 40/68] target/arm: Handle FPCR.AH in negation step in FMLS (indexed) Peter Maydell
2025-02-11 16:25 ` [PULL 41/68] target/arm: Handle FPCR.AH in negation in FMLS (vector) Peter Maydell
2025-02-11 16:25 ` [PULL 42/68] target/arm: Handle FPCR.AH in negation step in SVE " Peter Maydell
2025-02-11 16:25 ` [PULL 43/68] target/arm: Handle FPCR.AH in SVE FTSSEL Peter Maydell
2025-02-11 16:25 ` [PULL 44/68] target/arm: Handle FPCR.AH in SVE FTMAD Peter Maydell
2025-02-11 16:25 ` [PULL 45/68] target/arm: Handle FPCR.AH in vector FCMLA Peter Maydell
2025-02-11 16:25 ` [PULL 46/68] target/arm: Handle FPCR.AH in FCMLA by index Peter Maydell
2025-02-11 16:25 ` [PULL 47/68] target/arm: Handle FPCR.AH in SVE FCMLA Peter Maydell
2025-02-11 16:25 ` [PULL 48/68] target/arm: Handle FPCR.AH in FMLSL (by element and vector) Peter Maydell
2025-02-11 16:25 ` [PULL 49/68] target/arm: Handle FPCR.AH in SVE FMLSL (indexed) Peter Maydell
2025-02-11 16:25 ` [PULL 50/68] target/arm: Handle FPCR.AH in SVE FMLSLB, FMLSLT (vectors) Peter Maydell
2025-02-11 16:25 ` [PULL 51/68] target/arm: Enable FEAT_AFP for '-cpu max' Peter Maydell
2025-02-11 16:25 ` [PULL 52/68] target/arm: Plumb FEAT_RPRES frecpe and frsqrte through to new helper Peter Maydell
2025-02-11 16:25 ` [PULL 53/68] target/arm: Implement increased precision FRECPE Peter Maydell
2025-02-11 16:25 ` [PULL 54/68] target/arm: Implement increased precision FRSQRTE Peter Maydell
2025-02-11 16:25 ` [PULL 55/68] target/arm: Enable FEAT_RPRES for -cpu max Peter Maydell
2025-02-11 16:25 ` [PULL 56/68] target/arm: Introduce CPUARMState.vfp.fp_status[] Peter Maydell
2025-02-11 16:25 ` [PULL 57/68] target/arm: Remove standard_fp_status_f16 Peter Maydell
2025-02-11 16:25 ` [PULL 58/68] target/arm: Remove standard_fp_status Peter Maydell
2025-02-11 16:25 ` [PULL 59/68] target/arm: Remove ah_fp_status_f16 Peter Maydell
2025-02-11 16:25 ` [PULL 60/68] target/arm: Remove ah_fp_status Peter Maydell
2025-02-11 16:25 ` [PULL 61/68] target/arm: Remove fp_status_f16_a64 Peter Maydell
2025-02-11 16:25 ` [PULL 62/68] target/arm: Remove fp_status_f16_a32 Peter Maydell
2025-02-11 16:25 ` [PULL 63/68] target/arm: Remove fp_status_a64 Peter Maydell
2025-02-11 16:25 ` [PULL 64/68] target/arm: Remove fp_status_a32 Peter Maydell
2025-02-11 16:25 ` [PULL 65/68] target/arm: Simplify fp_status indexing in mve_helper.c Peter Maydell
2025-02-11 16:25 ` [PULL 66/68] target/arm: Simplify DO_VFP_cmp in vfp_helper.c Peter Maydell
2025-02-11 16:25 ` [PULL 67/68] target/arm: Read fz16 from env->vfp.fpcr Peter Maydell
2025-02-11 16:25 ` [PULL 68/68] target/arm: Sink fp_status and fpcr access into do_fmlal* Peter Maydell
2025-02-12 17:38 ` [PULL 00/68] target-arm queue Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250211162554.4135349-4-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).