From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-riscv@nongnu.org, qemu-ppc@nongnu.org,
"Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
"Alistair Francis" <alistair@alistair23.me>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Thomas Huth" <thuth@redhat.com>,
"Markus Armbruster" <armbru@redhat.com>,
qemu-arm@nongnu.org, "Daniel P. Berrangé" <berrange@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PATCH v6 02/11] hw/intc/xilinx_intc: Make device endianness configurable
Date: Wed, 12 Feb 2025 12:24:04 +0100 [thread overview]
Message-ID: <20250212112413.37553-3-philmd@linaro.org> (raw)
In-Reply-To: <20250212112413.37553-1-philmd@linaro.org>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair
of DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "little-endian" property to select the device
endianness, defaulting to little endian.
Set the proper endianness for each machine using the device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/intc/xilinx_intc.c | 60 ++++++++++++++++++------
hw/microblaze/petalogix_ml605_mmu.c | 1 +
hw/microblaze/petalogix_s3adsp1800_mmu.c | 3 ++
hw/ppc/virtex_ml507.c | 1 +
hw/riscv/microblaze-v-generic.c | 1 +
5 files changed, 52 insertions(+), 14 deletions(-)
diff --git a/hw/intc/xilinx_intc.c b/hw/intc/xilinx_intc.c
index 6930f83907a..523402b688c 100644
--- a/hw/intc/xilinx_intc.c
+++ b/hw/intc/xilinx_intc.c
@@ -3,6 +3,9 @@
*
* Copyright (c) 2009 Edgar E. Iglesias.
*
+ * https://docs.amd.com/v/u/en-US/xps_intc
+ * DS572: LogiCORE IP XPS Interrupt Controller (v2.01a)
+ *
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
@@ -23,10 +26,12 @@
*/
#include "qemu/osdep.h"
+#include "qapi/error.h"
#include "hw/sysbus.h"
#include "qemu/module.h"
#include "hw/irq.h"
#include "hw/qdev-properties.h"
+#include "hw/qdev-properties-system.h"
#include "qom/object.h"
#define D(x)
@@ -49,6 +54,7 @@ struct XpsIntc
{
SysBusDevice parent_obj;
+ EndianMode model_endianness;
MemoryRegion mmio;
qemu_irq parent_irq;
@@ -140,18 +146,29 @@ static void pic_write(void *opaque, hwaddr addr,
update_irq(p);
}
-static const MemoryRegionOps pic_ops = {
- .read = pic_read,
- .write = pic_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
- .impl = {
- .min_access_size = 4,
- .max_access_size = 4,
+static const MemoryRegionOps pic_ops[2] = {
+ [0 ... 1] = {
+ .read = pic_read,
+ .write = pic_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+ .valid = {
+ /*
+ * All XPS INTC registers are accessed through the PLB interface.
+ * The base address for these registers is provided by the
+ * configuration parameter, C_BASEADDR. Each register is 32 bits
+ * although some bits may be unused and is accessed on a 4-byte
+ * boundary offset from the base address.
+ */
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
},
- .valid = {
- .min_access_size = 4,
- .max_access_size = 4
- }
+ [ENDIAN_MODE_BIG].endianness = DEVICE_BIG_ENDIAN,
+ [ENDIAN_MODE_LITTLE].endianness = DEVICE_LITTLE_ENDIAN,
};
static void irq_handler(void *opaque, int irq, int level)
@@ -174,13 +191,27 @@ static void xilinx_intc_init(Object *obj)
qdev_init_gpio_in(DEVICE(obj), irq_handler, 32);
sysbus_init_irq(SYS_BUS_DEVICE(obj), &p->parent_irq);
-
- memory_region_init_io(&p->mmio, obj, &pic_ops, p, "xlnx.xps-intc",
- R_MAX * 4);
sysbus_init_mmio(SYS_BUS_DEVICE(obj), &p->mmio);
}
+static void xilinx_intc_realize(DeviceState *dev, Error **errp)
+{
+ XpsIntc *p = XILINX_INTC(dev);
+
+ if (p->model_endianness == ENDIAN_MODE_UNSPECIFIED) {
+ error_setg(errp, TYPE_XILINX_INTC " property 'endianness'"
+ " must be set to 'big' or 'little'");
+ return;
+ }
+
+ memory_region_init_io(&p->mmio, OBJECT(dev),
+ &pic_ops[p->model_endianness],
+ p, "xlnx.xps-intc",
+ R_MAX * 4);
+}
+
static const Property xilinx_intc_properties[] = {
+ DEFINE_PROP_ENDIAN_NODEFAULT("endianness", XpsIntc, model_endianness),
DEFINE_PROP_UINT32("kind-of-intr", XpsIntc, c_kind_of_intr, 0),
};
@@ -188,6 +219,7 @@ static void xilinx_intc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
+ dc->realize = xilinx_intc_realize;
device_class_set_props(dc, xilinx_intc_properties);
}
diff --git a/hw/microblaze/petalogix_ml605_mmu.c b/hw/microblaze/petalogix_ml605_mmu.c
index 8b44be75a22..55398cc67d1 100644
--- a/hw/microblaze/petalogix_ml605_mmu.c
+++ b/hw/microblaze/petalogix_ml605_mmu.c
@@ -111,6 +111,7 @@ petalogix_ml605_init(MachineState *machine)
dev = qdev_new("xlnx.xps-intc");
+ qdev_prop_set_enum(dev, "endianness", ENDIAN_MODE_LITTLE);
qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
diff --git a/hw/microblaze/petalogix_s3adsp1800_mmu.c b/hw/microblaze/petalogix_s3adsp1800_mmu.c
index 2c0d8c34cd2..15cabe11777 100644
--- a/hw/microblaze/petalogix_s3adsp1800_mmu.c
+++ b/hw/microblaze/petalogix_s3adsp1800_mmu.c
@@ -71,6 +71,8 @@ petalogix_s3adsp1800_init(MachineState *machine)
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq irq[32];
MemoryRegion *sysmem = get_system_memory();
+ EndianMode endianness = TARGET_BIG_ENDIAN ? ENDIAN_MODE_BIG
+ : ENDIAN_MODE_LITTLE;
cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
object_property_set_str(OBJECT(cpu), "version", "7.10.d", &error_abort);
@@ -95,6 +97,7 @@ petalogix_s3adsp1800_init(MachineState *machine)
64 * KiB, 1, 0x89, 0x18, 0x0000, 0x0, 1);
dev = qdev_new("xlnx.xps-intc");
+ qdev_prop_set_enum(dev, "endianness", endianness);
qdev_prop_set_uint32(dev, "kind-of-intr",
1 << ETHLITE_IRQ | 1 << UARTLITE_IRQ);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
diff --git a/hw/ppc/virtex_ml507.c b/hw/ppc/virtex_ml507.c
index 23238119273..df8f9644829 100644
--- a/hw/ppc/virtex_ml507.c
+++ b/hw/ppc/virtex_ml507.c
@@ -217,6 +217,7 @@ static void virtex_init(MachineState *machine)
cpu_irq = qdev_get_gpio_in(DEVICE(cpu), PPC40x_INPUT_INT);
dev = qdev_new("xlnx.xps-intc");
+ qdev_prop_set_enum(dev, "endianness", ENDIAN_MODE_BIG);
qdev_prop_set_uint32(dev, "kind-of-intr", 0);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
diff --git a/hw/riscv/microblaze-v-generic.c b/hw/riscv/microblaze-v-generic.c
index 26788a1824a..ebdd461ae98 100644
--- a/hw/riscv/microblaze-v-generic.c
+++ b/hw/riscv/microblaze-v-generic.c
@@ -79,6 +79,7 @@ static void mb_v_generic_init(MachineState *machine)
memory_region_add_subregion(sysmem, ddr_base, phys_ram);
dev = qdev_new("xlnx.xps-intc");
+ qdev_prop_set_enum(dev, "endianness", ENDIAN_MODE_LITTLE);
qdev_prop_set_uint32(dev, "kind-of-intr",
1 << UARTLITE_IRQ);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
--
2.47.1
next prev parent reply other threads:[~2025-02-12 11:27 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-12 11:24 [PATCH v6 00/11] hw/microblaze: Allow running cross-endian vCPUs Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 01/11] hw/qdev-properties-system: Introduce EndianMode QAPI enum Philippe Mathieu-Daudé
2025-02-12 11:37 ` Thomas Huth
2025-02-12 11:43 ` Philippe Mathieu-Daudé
2025-02-12 12:02 ` Philippe Mathieu-Daudé
2025-02-12 12:11 ` Daniel P. Berrangé
2025-02-12 12:56 ` BALATON Zoltan
2025-02-12 13:53 ` Philippe Mathieu-Daudé
2025-02-12 14:03 ` Philippe Mathieu-Daudé
2025-02-12 16:23 ` BALATON Zoltan
2025-02-12 18:17 ` Philippe Mathieu-Daudé
2025-02-12 22:34 ` BALATON Zoltan
2025-02-13 7:07 ` Thomas Huth
2025-02-13 13:59 ` BALATON Zoltan
2025-02-13 14:24 ` Philippe Mathieu-Daudé
2025-02-13 14:33 ` Thomas Huth
2025-02-13 14:56 ` BALATON Zoltan
2025-02-12 11:24 ` Philippe Mathieu-Daudé [this message]
2025-02-12 11:42 ` [PATCH v6 02/11] hw/intc/xilinx_intc: Make device endianness configurable Thomas Huth
2025-02-12 11:44 ` Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 03/11] hw/net/xilinx_ethlite: " Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 04/11] hw/timer/xilinx_timer: " Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 05/11] hw/char/xilinx_uartlite: " Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 06/11] hw/ssi/xilinx_spi: " Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 07/11] tests/functional: Avoid using www.qemu-advent-calendar.org URL Philippe Mathieu-Daudé
2025-02-12 11:49 ` Thomas Huth
2025-02-12 11:53 ` Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 08/11] tests/functional: Explicit endianness of microblaze assets Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 09/11] tests/functional: Allow microblaze tests to take a machine name argument Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 10/11] tests/functional: Remove sleep() kludges from microblaze tests Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 11/11] tests/functional: Have microblaze tests inherit common parent class Philippe Mathieu-Daudé
2025-02-12 11:46 ` Thomas Huth
2025-02-12 11:55 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250212112413.37553-3-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=alistair@alistair23.me \
--cc=armbru@redhat.com \
--cc=berrange@redhat.com \
--cc=edgar.iglesias@gmail.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).