[PATCH v3 02/28] hw/intc/aspeed: Introduce helper functions for enable and status registers

[Jamin Lin via <qemu-devel@nongnu.org>]

The behavior of the enable and status registers is almost identical between
INTC(CPU Die) and INTCIO(IO Die). To reduce duplicated code, adds
"aspeed_intc_enable_handler" functions to handle enable register write
behavior and "aspeed_intc_status_handler" functions to handle status
register write behavior.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/intc/aspeed_intc.c | 190 ++++++++++++++++++++++++------------------
 1 file changed, 108 insertions(+), 82 deletions(-)

diff --git a/hw/intc/aspeed_intc.c b/hw/intc/aspeed_intc.c
index 316885a27a..8f9fa97acc 100644
--- a/hw/intc/aspeed_intc.c
+++ b/hw/intc/aspeed_intc.c
@@ -114,6 +114,112 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
     }
 }
 
+static void aspeed_intc_enable_handler(AspeedINTCState *s, hwaddr offset,
+                                       uint64_t data)
+{
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+    uint32_t addr = offset >> 2;
+    uint32_t old_enable;
+    uint32_t change;
+    uint32_t irq;
+
+    irq = (offset & 0x0f00) >> 8;
+
+    if (irq >= aic->num_ints) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
+                      __func__, irq);
+        return;
+    }
+
+    /*
+     * The enable registers are used to enable source interrupts.
+     * They also handle masking and unmasking of source interrupts
+     * during the execution of the source ISR.
+     */
+
+    /* disable all source interrupt */
+    if (!data && !s->enable[irq]) {
+        s->regs[addr] = data;
+        return;
+    }
+
+    old_enable = s->enable[irq];
+    s->enable[irq] |= data;
+
+    /* enable new source interrupt */
+    if (old_enable != s->enable[irq]) {
+        trace_aspeed_intc_enable(s->enable[irq]);
+        s->regs[addr] = data;
+        return;
+    }
+
+    /* mask and unmask source interrupt */
+    change = s->regs[addr] ^ data;
+    if (change & data) {
+        s->mask[irq] &= ~change;
+        trace_aspeed_intc_unmask(change, s->mask[irq]);
+    } else {
+        s->mask[irq] |= change;
+        trace_aspeed_intc_mask(change, s->mask[irq]);
+    }
+
+    s->regs[addr] = data;
+}
+
+static void aspeed_intc_status_handler(AspeedINTCState *s, hwaddr offset,
+                                       uint64_t data)
+{
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+    uint32_t addr = offset >> 2;
+    uint32_t irq;
+
+    if (!data) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid data 0\n", __func__);
+        return;
+    }
+
+    irq = (offset & 0x0f00) >> 8;
+
+    if (irq >= aic->num_ints) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
+                      __func__, irq);
+        return;
+    }
+
+    /* clear status */
+    s->regs[addr] &= ~data;
+
+    /*
+     * These status registers are used for notify sources ISR are executed.
+     * If one source ISR is executed, it will clear one bit.
+     * If it clear all bits, it means to initialize this register status
+     * rather than sources ISR are executed.
+     */
+    if (data == 0xffffffff) {
+        return;
+    }
+
+    /* All source ISR execution are done */
+    if (!s->regs[addr]) {
+        trace_aspeed_intc_all_isr_done(irq);
+        if (s->pending[irq]) {
+            /*
+             * handle pending source interrupt
+             * notify firmware which source interrupt are pending
+             * by setting status register
+             */
+            s->regs[addr] = s->pending[irq];
+            s->pending[irq] = 0;
+            trace_aspeed_intc_trigger_irq(irq, s->regs[addr]);
+            aspeed_intc_update(s, irq, 1);
+        } else {
+            /* clear irq */
+            trace_aspeed_intc_clear_irq(irq, 0);
+            aspeed_intc_update(s, irq, 0);
+        }
+    }
+}
+
 static uint64_t aspeed_intc_read(void *opaque, hwaddr offset, unsigned int size)
 {
     AspeedINTCState *s = ASPEED_INTC(opaque);
@@ -140,9 +246,6 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
     AspeedINTCState *s = ASPEED_INTC(opaque);
     AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
     uint32_t addr = offset >> 2;
-    uint32_t old_enable;
-    uint32_t change;
-    uint32_t irq;
 
     if (offset >= aic->reg_size) {
         qemu_log_mask(LOG_GUEST_ERROR,
@@ -163,45 +266,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
     case R_GICINT134_EN:
     case R_GICINT135_EN:
     case R_GICINT136_EN:
-        irq = (offset & 0x0f00) >> 8;
-
-        if (irq >= aic->num_ints) {
-            qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
-                          __func__, irq);
-            return;
-        }
-
-        /*
-         * These registers are used for enable sources interrupt and
-         * mask and unmask source interrupt while executing source ISR.
-         */
-
-        /* disable all source interrupt */
-        if (!data && !s->enable[irq]) {
-            s->regs[addr] = data;
-            return;
-        }
-
-        old_enable = s->enable[irq];
-        s->enable[irq] |= data;
-
-        /* enable new source interrupt */
-        if (old_enable != s->enable[irq]) {
-            trace_aspeed_intc_enable(s->enable[irq]);
-            s->regs[addr] = data;
-            return;
-        }
-
-        /* mask and unmask source interrupt */
-        change = s->regs[addr] ^ data;
-        if (change & data) {
-            s->mask[irq] &= ~change;
-            trace_aspeed_intc_unmask(change, s->mask[irq]);
-        } else {
-            s->mask[irq] |= change;
-            trace_aspeed_intc_mask(change, s->mask[irq]);
-        }
-        s->regs[addr] = data;
+        aspeed_intc_enable_handler(s, offset, data);
         break;
     case R_GICINT128_STATUS:
     case R_GICINT129_STATUS:
@@ -212,46 +277,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
     case R_GICINT134_STATUS:
     case R_GICINT135_STATUS:
     case R_GICINT136_STATUS:
-        irq = (offset & 0x0f00) >> 8;
-
-        if (irq >= aic->num_ints) {
-            qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
-                          __func__, irq);
-            return;
-        }
-
-        /* clear status */
-        s->regs[addr] &= ~data;
-
-        /*
-         * These status registers are used for notify sources ISR are executed.
-         * If one source ISR is executed, it will clear one bit.
-         * If it clear all bits, it means to initialize this register status
-         * rather than sources ISR are executed.
-         */
-        if (data == 0xffffffff) {
-            return;
-        }
-
-        /* All source ISR execution are done */
-        if (!s->regs[addr]) {
-            trace_aspeed_intc_all_isr_done(irq);
-            if (s->pending[irq]) {
-                /*
-                 * handle pending source interrupt
-                 * notify firmware which source interrupt are pending
-                 * by setting status register
-                 */
-                s->regs[addr] = s->pending[irq];
-                s->pending[irq] = 0;
-                trace_aspeed_intc_trigger_irq(irq, s->regs[addr]);
-                aspeed_intc_update(s, irq, 1);
-            } else {
-                /* clear irq */
-                trace_aspeed_intc_clear_irq(irq, 0);
-                aspeed_intc_update(s, irq, 0);
-            }
-        }
+        aspeed_intc_status_handler(s, offset, data);
         break;
     default:
         s->regs[addr] = data;
-- 
2.34.1