From: Jamin Lin via <qemu-devel@nongnu.org>
To: "Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"open list:All patches CC here" <qemu-devel@nongnu.org>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>
Cc: <jamin_lin@aspeedtech.com>, <troy_lee@aspeedtech.com>
Subject: [PATCH v3 03/28] hw/intc/aspeed: Add object type name to trace events for better debugging
Date: Thu, 13 Feb 2025 11:35:06 +0800 [thread overview]
Message-ID: <20250213033531.3367697-4-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20250213033531.3367697-1-jamin_lin@aspeedtech.com>
Currently, these trace events only refer to INTC. To simplify the INTC model,
both INTC(CPU Die) and INTCIO(IO Die) will share the same helper functions.
However, it is difficult to recognize whether these trace events are comes from
INTC or INTCIO. To make these trace events more readable, adds object type name
to the INTC trace events.
Update trace events to include the "name" field for better identification.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/intc/aspeed_intc.c | 32 +++++++++++++++++++-------------
hw/intc/trace-events | 24 ++++++++++++------------
2 files changed, 31 insertions(+), 25 deletions(-)
diff --git a/hw/intc/aspeed_intc.c b/hw/intc/aspeed_intc.c
index 8f9fa97acc..91d8edb261 100644
--- a/hw/intc/aspeed_intc.c
+++ b/hw/intc/aspeed_intc.c
@@ -39,6 +39,7 @@ REG32(GICINT136_STATUS, 0x1804)
static void aspeed_intc_update(AspeedINTCState *s, int irq, int level)
{
AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+ const char *name = object_get_typename(OBJECT(s));
if (irq >= aic->num_ints) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
@@ -46,7 +47,7 @@ static void aspeed_intc_update(AspeedINTCState *s, int irq, int level)
return;
}
- trace_aspeed_intc_update_irq(irq, level);
+ trace_aspeed_intc_update_irq(name, irq, level);
qemu_set_irq(s->output_pins[irq], level);
}
@@ -60,6 +61,7 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
{
AspeedINTCState *s = (AspeedINTCState *)opaque;
AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+ const char *name = object_get_typename(OBJECT(s));
uint32_t status_addr = GICINT_STATUS_BASE + ((0x100 * irq) >> 2);
uint32_t select = 0;
uint32_t enable;
@@ -71,7 +73,7 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
return;
}
- trace_aspeed_intc_set_irq(irq, level);
+ trace_aspeed_intc_set_irq(name, irq, level);
enable = s->enable[irq];
if (!level) {
@@ -90,7 +92,7 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
return;
}
- trace_aspeed_intc_select(select);
+ trace_aspeed_intc_select(name, select);
if (s->mask[irq] || s->regs[status_addr]) {
/*
@@ -102,14 +104,14 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
* save source interrupt to pending variable.
*/
s->pending[irq] |= select;
- trace_aspeed_intc_pending_irq(irq, s->pending[irq]);
+ trace_aspeed_intc_pending_irq(name, irq, s->pending[irq]);
} else {
/*
* notify firmware which source interrupt are coming
* by setting status register
*/
s->regs[status_addr] = select;
- trace_aspeed_intc_trigger_irq(irq, s->regs[status_addr]);
+ trace_aspeed_intc_trigger_irq(name, irq, s->regs[status_addr]);
aspeed_intc_update(s, irq, 1);
}
}
@@ -118,6 +120,7 @@ static void aspeed_intc_enable_handler(AspeedINTCState *s, hwaddr offset,
uint64_t data)
{
AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+ const char *name = object_get_typename(OBJECT(s));
uint32_t addr = offset >> 2;
uint32_t old_enable;
uint32_t change;
@@ -148,7 +151,7 @@ static void aspeed_intc_enable_handler(AspeedINTCState *s, hwaddr offset,
/* enable new source interrupt */
if (old_enable != s->enable[irq]) {
- trace_aspeed_intc_enable(s->enable[irq]);
+ trace_aspeed_intc_enable(name, s->enable[irq]);
s->regs[addr] = data;
return;
}
@@ -157,10 +160,10 @@ static void aspeed_intc_enable_handler(AspeedINTCState *s, hwaddr offset,
change = s->regs[addr] ^ data;
if (change & data) {
s->mask[irq] &= ~change;
- trace_aspeed_intc_unmask(change, s->mask[irq]);
+ trace_aspeed_intc_unmask(name, change, s->mask[irq]);
} else {
s->mask[irq] |= change;
- trace_aspeed_intc_mask(change, s->mask[irq]);
+ trace_aspeed_intc_mask(name, change, s->mask[irq]);
}
s->regs[addr] = data;
@@ -170,6 +173,7 @@ static void aspeed_intc_status_handler(AspeedINTCState *s, hwaddr offset,
uint64_t data)
{
AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+ const char *name = object_get_typename(OBJECT(s));
uint32_t addr = offset >> 2;
uint32_t irq;
@@ -201,7 +205,7 @@ static void aspeed_intc_status_handler(AspeedINTCState *s, hwaddr offset,
/* All source ISR execution are done */
if (!s->regs[addr]) {
- trace_aspeed_intc_all_isr_done(irq);
+ trace_aspeed_intc_all_isr_done(name, irq);
if (s->pending[irq]) {
/*
* handle pending source interrupt
@@ -210,11 +214,11 @@ static void aspeed_intc_status_handler(AspeedINTCState *s, hwaddr offset,
*/
s->regs[addr] = s->pending[irq];
s->pending[irq] = 0;
- trace_aspeed_intc_trigger_irq(irq, s->regs[addr]);
+ trace_aspeed_intc_trigger_irq(name, irq, s->regs[addr]);
aspeed_intc_update(s, irq, 1);
} else {
/* clear irq */
- trace_aspeed_intc_clear_irq(irq, 0);
+ trace_aspeed_intc_clear_irq(name, irq, 0);
aspeed_intc_update(s, irq, 0);
}
}
@@ -224,6 +228,7 @@ static uint64_t aspeed_intc_read(void *opaque, hwaddr offset, unsigned int size)
{
AspeedINTCState *s = ASPEED_INTC(opaque);
AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+ const char *name = object_get_typename(OBJECT(s));
uint32_t addr = offset >> 2;
uint32_t value = 0;
@@ -235,7 +240,7 @@ static uint64_t aspeed_intc_read(void *opaque, hwaddr offset, unsigned int size)
}
value = s->regs[addr];
- trace_aspeed_intc_read(offset, size, value);
+ trace_aspeed_intc_read(name, offset, size, value);
return value;
}
@@ -245,6 +250,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
{
AspeedINTCState *s = ASPEED_INTC(opaque);
AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+ const char *name = object_get_typename(OBJECT(s));
uint32_t addr = offset >> 2;
if (offset >= aic->reg_size) {
@@ -254,7 +260,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
return;
}
- trace_aspeed_intc_write(offset, size, data);
+ trace_aspeed_intc_write(name, offset, size, data);
switch (addr) {
case R_GICINT128_EN:
diff --git a/hw/intc/trace-events b/hw/intc/trace-events
index 3dcf147198..e9ca34755e 100644
--- a/hw/intc/trace-events
+++ b/hw/intc/trace-events
@@ -80,18 +80,18 @@ aspeed_vic_update_irq(int flags) "Raising IRQ: %d"
aspeed_vic_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
aspeed_vic_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
# aspeed_intc.c
-aspeed_intc_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
-aspeed_intc_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
-aspeed_intc_set_irq(int irq, int level) "Set IRQ %d: %d"
-aspeed_intc_clear_irq(int irq, int level) "Clear IRQ %d: %d"
-aspeed_intc_update_irq(int irq, int level) "Update IRQ: %d: %d"
-aspeed_intc_pending_irq(int irq, uint32_t value) "Pending IRQ: %d: 0x%x"
-aspeed_intc_trigger_irq(int irq, uint32_t value) "Trigger IRQ: %d: 0x%x"
-aspeed_intc_all_isr_done(int irq) "All source ISR execution are done: %d"
-aspeed_intc_enable(uint32_t value) "Enable: 0x%x"
-aspeed_intc_select(uint32_t value) "Select: 0x%x"
-aspeed_intc_mask(uint32_t change, uint32_t value) "Mask: 0x%x: 0x%x"
-aspeed_intc_unmask(uint32_t change, uint32_t value) "UnMask: 0x%x: 0x%x"
+aspeed_intc_read(const char *s, uint64_t offset, unsigned size, uint32_t value) "%s: From 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_intc_write(const char *s, uint64_t offset, unsigned size, uint32_t data) "%s: To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_intc_set_irq(const char *s, int irq, int level) "%s: Set IRQ %d: %d"
+aspeed_intc_clear_irq(const char *s, int irq, int level) "%s: Clear IRQ %d: %d"
+aspeed_intc_update_irq(const char *s, int irq, int level) "%s: Update IRQ: %d: %d"
+aspeed_intc_pending_irq(const char *s, int irq, uint32_t value) "%s: Pending IRQ: %d: 0x%x"
+aspeed_intc_trigger_irq(const char *s, int irq, uint32_t value) "%s: Trigger IRQ: %d: 0x%x"
+aspeed_intc_all_isr_done(const char *s, int irq) "%s: All source ISR execution are done: %d"
+aspeed_intc_enable(const char *s, uint32_t value) "%s: Enable: 0x%x"
+aspeed_intc_select(const char *s, uint32_t value) "%s: Select: 0x%x"
+aspeed_intc_mask(const char *s, uint32_t change, uint32_t value) "%s: Mask: 0x%x: 0x%x"
+aspeed_intc_unmask(const char *s, uint32_t change, uint32_t value) "%s: UnMask: 0x%x: 0x%x"
# arm_gic.c
gic_enable_irq(int irq) "irq %d enabled"
--
2.34.1
next prev parent reply other threads:[~2025-02-13 3:39 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-13 3:35 [PATCH v3 00/28] Support AST2700 A1 Jamin Lin via
2025-02-13 3:35 ` [PATCH v3 01/28] hw/intc/aspeed: Support setting different memory and register size Jamin Lin via
2025-02-18 5:33 ` Cédric Le Goater
2025-02-20 5:45 ` Jamin Lin
2025-02-21 15:15 ` Cédric Le Goater
2025-02-26 3:40 ` Jamin Lin
2025-02-27 9:57 ` Cédric Le Goater
2025-03-03 2:52 ` Jamin Lin
2025-02-13 3:35 ` [PATCH v3 02/28] hw/intc/aspeed: Introduce helper functions for enable and status registers Jamin Lin via
2025-02-18 5:36 ` Cédric Le Goater
2025-02-20 3:24 ` Jamin Lin
2025-02-13 3:35 ` Jamin Lin via [this message]
2025-02-18 5:43 ` [PATCH v3 03/28] hw/intc/aspeed: Add object type name to trace events for better debugging Cédric Le Goater
2025-02-13 3:35 ` [PATCH v3 04/28] hw/arm/aspeed: Rename IRQ table and machine name for AST2700 A0 Jamin Lin via
2025-02-18 5:47 ` Cédric Le Goater
2025-02-21 2:23 ` Jamin Lin
2025-02-21 14:04 ` Cédric Le Goater
2025-02-13 3:35 ` [PATCH v3 05/28] hw/arm/aspeed_ast27x0: Sort the IRQ table by IRQ number Jamin Lin via
2025-02-18 5:48 ` Cédric Le Goater
2025-02-13 3:35 ` [PATCH v3 06/28] hw/intc/aspeed: Support different memory region ops Jamin Lin via
2025-02-18 5:48 ` Cédric Le Goater
2025-02-13 3:35 ` [PATCH v3 07/28] hw/intc/aspeed: Rename num_ints to num_inpins for clarity Jamin Lin via
2025-02-18 5:49 ` Cédric Le Goater
2025-02-13 3:35 ` [PATCH v3 08/28] hw/intc/aspeed: Add support for multiple output pins in INTC Jamin Lin via
2025-02-18 5:53 ` Cédric Le Goater
2025-02-21 1:31 ` Jamin Lin
2025-02-13 3:35 ` [PATCH v3 09/28] hw/intc/aspeed: Refactor INTC to support separate input and output pin indices Jamin Lin via
2025-02-18 6:20 ` Cédric Le Goater
2025-02-13 3:35 ` [PATCH v3 10/28] hw/intc/aspeed: Introduce AspeedINTCIRQ structure to save the irq index and register address Jamin Lin via
2025-02-13 3:35 ` [PATCH v3 11/28] hw/intc/aspeed: Introduce IRQ handler function to reduce code duplication Jamin Lin via
2025-02-18 9:17 ` Cédric Le Goater
2025-02-20 3:14 ` Jamin Lin
2025-02-13 3:35 ` [PATCH v3 12/28] hw/intc/aspeed: Add Support for Multi-Output IRQ Handling Jamin Lin via
2025-02-13 3:35 ` [PATCH v3 13/28] hw/intc/aspeed: Add Support for AST2700 INTCIO Controller Jamin Lin via
2025-02-18 9:15 ` Cédric Le Goater
2025-02-20 5:57 ` Jamin Lin
2025-02-13 3:35 ` [PATCH v3 14/28] hw/misc/aspeed_scu: Add Support for AST2700/AST2750 A1 Silicon Revisions Jamin Lin via
2025-02-18 6:35 ` Cédric Le Goater
2025-02-13 3:35 ` [PATCH v3 15/28] hw/misc/aspeed_scu: Fix the revision ID cannot be set in the SOC layer for AST2700 Jamin Lin via
2025-02-18 6:47 ` Cédric Le Goater
2025-02-26 6:38 ` Jamin Lin
2025-02-27 9:33 ` Cédric Le Goater
2025-03-03 2:51 ` Jamin Lin
2025-02-13 3:35 ` [PATCH v3 16/28] hw/arm/aspeed_ast27x0.c Support AST2700 A1 GIC Interrupt Mapping Jamin Lin via
2025-02-13 3:35 ` [PATCH v3 17/28] hw/arm/aspeed_ast27x0: Support two levels of INTC controllers for AST2700 A1 Jamin Lin via
2025-02-13 3:35 ` [PATCH v3 18/28] hw/arm/aspeed: Add SoC and Machine Support " Jamin Lin via
2025-02-18 6:49 ` Cédric Le Goater
2025-02-21 1:37 ` Jamin Lin
2025-02-13 3:35 ` [PATCH v3 19/28] hw/misc/aspeed_hace: Fix coding style Jamin Lin via
2025-02-18 6:21 ` Cédric Le Goater
2025-02-13 3:35 ` [PATCH v3 20/28] hw/misc/aspeed_hace: Add AST2700 support Jamin Lin via
2025-02-13 3:35 ` [PATCH v3 21/28] hw/misc/aspeed_hace: Fix boot issue in the Crypto Manager Self Test Jamin Lin via
2025-02-18 6:26 ` Cédric Le Goater
2025-02-21 5:43 ` Jamin Lin
2025-02-21 6:55 ` Jamin Lin
2025-02-21 13:53 ` Cédric Le Goater
2025-02-24 5:10 ` Jamin Lin
2025-02-13 3:35 ` [PATCH v3 22/28] hw/arm/aspeed_ast27x0: Add HACE support for AST2700 Jamin Lin via
2025-02-13 3:35 ` [PATCH v3 23/28] test/functional/aspeed: Introduce new function to fetch assets Jamin Lin via
2025-02-18 6:30 ` Cédric Le Goater
2025-02-21 1:35 ` Jamin Lin
2025-02-13 3:35 ` [PATCH v3 24/28] tests/functional/aspeed: Introduce start_ast2700_test API and update hwmon path Jamin Lin via
2025-02-13 3:35 ` [PATCH v3 25/28] tests/functional/aspeed: Update test ASPEED SDK v09.05 Jamin Lin via
2025-02-13 3:35 ` [PATCH v3 26/28] tests/functional/aspeed: Renamed test case and machine for AST2700 A0 Jamin Lin via
2025-02-13 3:35 ` [PATCH v3 27/28] tests/functional/aspeed: Add test case for AST2700 A1 Jamin Lin via
2025-02-13 3:35 ` [PATCH v3 28/28] docs/specs: add aspeed-intc Jamin Lin via
2025-02-18 9:25 ` [PATCH v3 00/28] Support AST2700 A1 Cédric Le Goater
2025-02-20 5:11 ` Jamin Lin
2025-02-21 17:24 ` Cédric Le Goater
2025-02-25 8:02 ` Jamin Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250213033531.3367697-4-jamin_lin@aspeedtech.com \
--to=qemu-devel@nongnu.org \
--cc=andrew@codeconstruct.com.au \
--cc=clg@kaod.org \
--cc=jamin_lin@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=leetroy@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).