From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Thomas Huth" <thuth@redhat.com>,
"Richard Henderson" <richard.henderson@linaro.org>
Subject: [PULL 32/39] hw/timer/xilinx_timer: Make device endianness configurable
Date: Sun, 16 Feb 2025 22:00:56 +0100 [thread overview]
Message-ID: <20250216210103.70235-5-philmd@linaro.org> (raw)
In-Reply-To: <20250216210103.70235-1-philmd@linaro.org>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.
Set the proper endianness for each machine using the device.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-5-philmd@linaro.org>
---
hw/microblaze/petalogix_ml605_mmu.c | 1 +
hw/microblaze/petalogix_s3adsp1800_mmu.c | 1 +
hw/ppc/virtex_ml507.c | 1 +
hw/riscv/microblaze-v-generic.c | 2 ++
hw/timer/xilinx_timer.c | 43 +++++++++++++++++-------
5 files changed, 35 insertions(+), 13 deletions(-)
diff --git a/hw/microblaze/petalogix_ml605_mmu.c b/hw/microblaze/petalogix_ml605_mmu.c
index a876aeb0bba..984287fdc53 100644
--- a/hw/microblaze/petalogix_ml605_mmu.c
+++ b/hw/microblaze/petalogix_ml605_mmu.c
@@ -129,6 +129,7 @@ petalogix_ml605_init(MachineState *machine)
/* 2 timers at irq 2 @ 100 Mhz. */
dev = qdev_new("xlnx.xps-timer");
+ qdev_prop_set_enum(dev, "endianness", endianness);
qdev_prop_set_uint32(dev, "one-timer-only", 0);
qdev_prop_set_uint32(dev, "clock-frequency", 100 * 1000000);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
diff --git a/hw/microblaze/petalogix_s3adsp1800_mmu.c b/hw/microblaze/petalogix_s3adsp1800_mmu.c
index d419dc49a25..caaea222a8c 100644
--- a/hw/microblaze/petalogix_s3adsp1800_mmu.c
+++ b/hw/microblaze/petalogix_s3adsp1800_mmu.c
@@ -116,6 +116,7 @@ petalogix_s3adsp1800_init(MachineState *machine)
/* 2 timers at irq 2 @ 62 Mhz. */
dev = qdev_new("xlnx.xps-timer");
+ qdev_prop_set_enum(dev, "endianness", endianness);
qdev_prop_set_uint32(dev, "one-timer-only", 0);
qdev_prop_set_uint32(dev, "clock-frequency", 62 * 1000000);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
diff --git a/hw/ppc/virtex_ml507.c b/hw/ppc/virtex_ml507.c
index df8f9644829..a01354d991d 100644
--- a/hw/ppc/virtex_ml507.c
+++ b/hw/ppc/virtex_ml507.c
@@ -231,6 +231,7 @@ static void virtex_init(MachineState *machine)
/* 2 timers at irq 2 @ 62 Mhz. */
dev = qdev_new("xlnx.xps-timer");
+ qdev_prop_set_enum(dev, "endianness", ENDIAN_MODE_BIG);
qdev_prop_set_uint32(dev, "one-timer-only", 0);
qdev_prop_set_uint32(dev, "clock-frequency", 62 * 1000000);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
diff --git a/hw/riscv/microblaze-v-generic.c b/hw/riscv/microblaze-v-generic.c
index a21fdfbe6db..3c79f5733b2 100644
--- a/hw/riscv/microblaze-v-generic.c
+++ b/hw/riscv/microblaze-v-generic.c
@@ -104,6 +104,7 @@ static void mb_v_generic_init(MachineState *machine)
/* 2 timers at irq 0 @ 100 Mhz. */
dev = qdev_new("xlnx.xps-timer");
+ qdev_prop_set_enum(dev, "endianness", ENDIAN_MODE_LITTLE);
qdev_prop_set_uint32(dev, "one-timer-only", 0);
qdev_prop_set_uint32(dev, "clock-frequency", 100000000);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
@@ -112,6 +113,7 @@ static void mb_v_generic_init(MachineState *machine)
/* 2 timers at irq 3 @ 100 Mhz. */
dev = qdev_new("xlnx.xps-timer");
+ qdev_prop_set_enum(dev, "endianness", ENDIAN_MODE_LITTLE);
qdev_prop_set_uint32(dev, "one-timer-only", 0);
qdev_prop_set_uint32(dev, "clock-frequency", 100000000);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
diff --git a/hw/timer/xilinx_timer.c b/hw/timer/xilinx_timer.c
index 6595cf5f517..4620528f985 100644
--- a/hw/timer/xilinx_timer.c
+++ b/hw/timer/xilinx_timer.c
@@ -3,6 +3,9 @@
*
* Copyright (c) 2009 Edgar E. Iglesias.
*
+ * DS573: https://docs.amd.com/v/u/en-US/xps_timer
+ * LogiCORE IP XPS Timer/Counter (v1.02a)
+ *
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
@@ -23,10 +26,12 @@
*/
#include "qemu/osdep.h"
+#include "qapi/error.h"
#include "hw/sysbus.h"
#include "hw/irq.h"
#include "hw/ptimer.h"
#include "hw/qdev-properties.h"
+#include "hw/qdev-properties-system.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "qom/object.h"
@@ -69,6 +74,7 @@ struct XpsTimerState
{
SysBusDevice parent_obj;
+ EndianMode model_endianness;
MemoryRegion mmio;
qemu_irq irq;
uint8_t one_timer_only;
@@ -189,18 +195,21 @@ timer_write(void *opaque, hwaddr addr,
timer_update_irq(t);
}
-static const MemoryRegionOps timer_ops = {
- .read = timer_read,
- .write = timer_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
- .impl = {
- .min_access_size = 4,
- .max_access_size = 4,
+static const MemoryRegionOps timer_ops[2] = {
+ [0 ... 1] = {
+ .read = timer_read,
+ .write = timer_write,
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
},
- .valid = {
- .min_access_size = 4,
- .max_access_size = 4
- }
+ [0].endianness = DEVICE_LITTLE_ENDIAN,
+ [1].endianness = DEVICE_BIG_ENDIAN,
};
static void timer_hit(void *opaque)
@@ -220,6 +229,12 @@ static void xilinx_timer_realize(DeviceState *dev, Error **errp)
XpsTimerState *t = XILINX_TIMER(dev);
unsigned int i;
+ if (t->model_endianness == ENDIAN_MODE_UNSPECIFIED) {
+ error_setg(errp, TYPE_XILINX_TIMER " property 'endianness'"
+ " must be set to 'big' or 'little'");
+ return;
+ }
+
/* Init all the ptimers. */
t->timers = g_malloc0(sizeof t->timers[0] * num_timers(t));
for (i = 0; i < num_timers(t); i++) {
@@ -233,8 +248,9 @@ static void xilinx_timer_realize(DeviceState *dev, Error **errp)
ptimer_transaction_commit(xt->ptimer);
}
- memory_region_init_io(&t->mmio, OBJECT(t), &timer_ops, t, "xlnx.xps-timer",
- R_MAX * 4 * num_timers(t));
+ memory_region_init_io(&t->mmio, OBJECT(t),
+ &timer_ops[t->model_endianness == ENDIAN_MODE_BIG],
+ t, "xlnx.xps-timer", R_MAX * 4 * num_timers(t));
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &t->mmio);
}
@@ -247,6 +263,7 @@ static void xilinx_timer_init(Object *obj)
}
static const Property xilinx_timer_properties[] = {
+ DEFINE_PROP_ENDIAN_NODEFAULT("endianness", XpsTimerState, model_endianness),
DEFINE_PROP_UINT32("clock-frequency", XpsTimerState, freq_hz, 62 * 1000000),
DEFINE_PROP_UINT8("one-timer-only", XpsTimerState, one_timer_only, 0),
};
--
2.47.1
next prev parent reply other threads:[~2025-02-16 21:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-16 21:00 [PULL 00/39] Misc HW patches for 2025-02-16 Philippe Mathieu-Daudé
2025-02-16 21:00 ` [PULL 29/39] hw/qdev-properties-system: Introduce EndianMode QAPI enum Philippe Mathieu-Daudé
2025-02-16 21:00 ` [PULL 30/39] hw/intc/xilinx_intc: Make device endianness configurable Philippe Mathieu-Daudé
2025-02-16 21:00 ` [PULL 31/39] hw/net/xilinx_ethlite: " Philippe Mathieu-Daudé
2025-02-16 21:00 ` Philippe Mathieu-Daudé [this message]
2025-02-16 21:00 ` [PULL 33/39] hw/char/xilinx_uartlite: " Philippe Mathieu-Daudé
2025-02-16 21:00 ` [PULL 34/39] hw/ssi/xilinx_spi: " Philippe Mathieu-Daudé
2025-02-16 21:00 ` [PULL 35/39] hw/arm: Mark Allwinner Technology devices as little-endian Philippe Mathieu-Daudé
2025-02-16 21:01 ` [PULL 36/39] hw/mips: Mark Boston machine " Philippe Mathieu-Daudé
2025-02-16 21:01 ` [PULL 37/39] hw/mips: Mark Loonson3 Virt " Philippe Mathieu-Daudé
2025-02-16 21:01 ` [PULL 38/39] hw/pci-host: Mark versatile regions " Philippe Mathieu-Daudé
2025-02-16 21:01 ` [PULL 39/39] hw/rx: Allow execution without either bios or kernel Philippe Mathieu-Daudé
2025-02-17 8:25 ` [PULL 00/39] Misc HW patches for 2025-02-16 Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250216210103.70235-5-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).