[PULL 33/39] hw/char/xilinx_uartlite: Make device endianness configurable

["Philippe Mathieu-Daudé" <philmd@linaro.org>]

Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.

Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.

Set the proper endianness for each machine using the device.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-6-philmd@linaro.org>
---
 hw/char/xilinx_uartlite.c                | 34 ++++++++++++++++--------
 hw/microblaze/petalogix_s3adsp1800_mmu.c |  1 +
 hw/riscv/microblaze-v-generic.c          |  1 +
 3 files changed, 25 insertions(+), 11 deletions(-)

diff --git a/hw/char/xilinx_uartlite.c b/hw/char/xilinx_uartlite.c
index 56955e0d74a..4037c937eeb 100644
--- a/hw/char/xilinx_uartlite.c
+++ b/hw/char/xilinx_uartlite.c
@@ -24,6 +24,7 @@
 
 #include "qemu/osdep.h"
 #include "qemu/log.h"
+#include "qapi/error.h"
 #include "hw/char/xilinx_uartlite.h"
 #include "hw/irq.h"
 #include "hw/qdev-properties.h"
@@ -57,6 +58,7 @@
 struct XilinxUARTLite {
     SysBusDevice parent_obj;
 
+    EndianMode model_endianness;
     MemoryRegion mmio;
     CharBackend chr;
     qemu_irq irq;
@@ -166,17 +168,21 @@ uart_write(void *opaque, hwaddr addr,
     uart_update_irq(s);
 }
 
-static const MemoryRegionOps uart_ops = {
-    .read = uart_read,
-    .write = uart_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-    .valid = {
-        .min_access_size = 1,
-        .max_access_size = 4
-    }
+static const MemoryRegionOps uart_ops[2] = {
+    [0 ... 1] = {
+        .read = uart_read,
+        .write = uart_write,
+        .valid = {
+            .min_access_size = 1,
+            .max_access_size = 4,
+        },
+    },
+    [0].endianness = DEVICE_LITTLE_ENDIAN,
+    [1].endianness = DEVICE_BIG_ENDIAN,
 };
 
 static const Property xilinx_uartlite_properties[] = {
+    DEFINE_PROP_ENDIAN_NODEFAULT("endianness", XilinxUARTLite, model_endianness),
     DEFINE_PROP_CHR("chardev", XilinxUARTLite, chr),
 };
 
@@ -214,6 +220,15 @@ static void xilinx_uartlite_realize(DeviceState *dev, Error **errp)
 {
     XilinxUARTLite *s = XILINX_UARTLITE(dev);
 
+    if (s->model_endianness == ENDIAN_MODE_UNSPECIFIED) {
+        error_setg(errp, TYPE_XILINX_UARTLITE " property 'endianness'"
+                         " must be set to 'big' or 'little'");
+        return;
+    }
+
+    memory_region_init_io(&s->mmio, OBJECT(dev),
+                          &uart_ops[s->model_endianness == ENDIAN_MODE_BIG],
+                          s, "xlnx.xps-uartlite", R_MAX * 4);
     qemu_chr_fe_set_handlers(&s->chr, uart_can_rx, uart_rx,
                              uart_event, NULL, s, NULL, true);
 }
@@ -223,9 +238,6 @@ static void xilinx_uartlite_init(Object *obj)
     XilinxUARTLite *s = XILINX_UARTLITE(obj);
 
     sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
-
-    memory_region_init_io(&s->mmio, obj, &uart_ops, s,
-                          "xlnx.xps-uartlite", R_MAX * 4);
     sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
 }
 
diff --git a/hw/microblaze/petalogix_s3adsp1800_mmu.c b/hw/microblaze/petalogix_s3adsp1800_mmu.c
index caaea222a8c..bdba2006b72 100644
--- a/hw/microblaze/petalogix_s3adsp1800_mmu.c
+++ b/hw/microblaze/petalogix_s3adsp1800_mmu.c
@@ -109,6 +109,7 @@ petalogix_s3adsp1800_init(MachineState *machine)
     }
 
     dev = qdev_new(TYPE_XILINX_UARTLITE);
+    qdev_prop_set_enum(dev, "endianness", endianness);
     qdev_prop_set_chr(dev, "chardev", serial_hd(0));
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, UARTLITE_BASEADDR);
diff --git a/hw/riscv/microblaze-v-generic.c b/hw/riscv/microblaze-v-generic.c
index 3c79f5733b2..d8e67906d26 100644
--- a/hw/riscv/microblaze-v-generic.c
+++ b/hw/riscv/microblaze-v-generic.c
@@ -92,6 +92,7 @@ static void mb_v_generic_init(MachineState *machine)
 
     /* Uartlite */
     dev = qdev_new(TYPE_XILINX_UARTLITE);
+    qdev_prop_set_enum(dev, "endianness", ENDIAN_MODE_LITTLE);
     qdev_prop_set_chr(dev, "chardev", serial_hd(0));
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, UARTLITE_BASEADDR);
-- 
2.47.1