[PATCH 2/2] scsi-disk: Add native FUA support

[Alberto Faria <afaria@redhat.com>]

Avoid emulating FUA when the driver supports it natively. This should
provide better performance than a full flush after the write.

Signed-off-by: Alberto Faria <afaria@redhat.com>
---
 hw/scsi/scsi-disk.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index 8cf50845ab..ce48e20ee6 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -43,6 +43,7 @@
 #include "qemu/cutils.h"
 #include "trace.h"
 #include "qom/object.h"
+#include "block/block_int-common.h"
 
 #ifdef __linux
 #include <scsi/sg.h>
@@ -75,7 +76,7 @@ struct SCSIDiskClass {
      */
     DMAIOFunc       *dma_readv;
     DMAIOFunc       *dma_writev;
-    bool            (*need_fua_emulation)(SCSICommand *cmd);
+    bool            (*need_fua)(SCSICommand *cmd);
     void            (*update_sense)(SCSIRequest *r);
 };
 
@@ -86,6 +87,7 @@ typedef struct SCSIDiskReq {
     uint32_t sector_count;
     uint32_t buflen;
     bool started;
+    bool need_fua;
     bool need_fua_emulation;
     struct iovec iov;
     QEMUIOVector qiov;
@@ -553,7 +555,7 @@ static void scsi_read_data(SCSIRequest *req)
 
     first = !r->started;
     r->started = true;
-    if (first && r->need_fua_emulation) {
+    if (first && r->need_fua) {
         block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0,
                          BLOCK_ACCT_FLUSH);
         r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_do_read_cb, r);
@@ -2384,7 +2386,9 @@ static int32_t scsi_disk_dma_command(SCSIRequest *req, uint8_t *buf)
         scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
         return 0;
     }
-    r->need_fua_emulation = sdc->need_fua_emulation(&r->req.cmd);
+    r->need_fua = sdc->need_fua(&r->req.cmd);
+    r->need_fua_emulation = r->need_fua &&
+        (blk_bs(s->qdev.conf.blk)->supported_write_flags & BDRV_REQ_FUA) == 0;
     if (r->sector_count == 0) {
         scsi_req_complete(&r->req, GOOD);
     }
@@ -3134,7 +3138,8 @@ BlockAIOCB *scsi_dma_writev(int64_t offset, QEMUIOVector *iov,
 {
     SCSIDiskReq *r = opaque;
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
-    return blk_aio_pwritev(s->qdev.conf.blk, offset, iov, 0, cb, cb_opaque);
+    int flags = r->need_fua && !r->need_fua_emulation ? BDRV_REQ_FUA : 0;
+    return blk_aio_pwritev(s->qdev.conf.blk, offset, iov, flags, cb, cb_opaque);
 }
 
 static char *scsi_property_get_loadparm(Object *obj, Error **errp)
@@ -3183,7 +3188,7 @@ static void scsi_disk_base_class_initfn(ObjectClass *klass, void *data)
     device_class_set_legacy_reset(dc, scsi_disk_reset);
     sdc->dma_readv = scsi_dma_readv;
     sdc->dma_writev = scsi_dma_writev;
-    sdc->need_fua_emulation = scsi_is_cmd_fua;
+    sdc->need_fua = scsi_is_cmd_fua;
 }
 
 static const TypeInfo scsi_disk_base_info = {
@@ -3335,7 +3340,7 @@ static void scsi_block_class_initfn(ObjectClass *klass, void *data)
     sdc->dma_readv   = scsi_block_dma_readv;
     sdc->dma_writev  = scsi_block_dma_writev;
     sdc->update_sense = scsi_block_update_sense;
-    sdc->need_fua_emulation = scsi_block_no_fua;
+    sdc->need_fua = scsi_block_no_fua;
     dc->desc = "SCSI block device passthrough";
     device_class_set_props(dc, scsi_block_properties);
     dc->vmsd  = &vmstate_scsi_disk_state;
-- 
2.48.1