From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "BALATON Zoltan" <balaton@eik.bme.hu>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Mark Cave-Ayland" <mark.cave-ayland@ilande.co.uk>
Subject: [PULL 30/41] hw/misc/macio/gpio: Add constants for register bits
Date: Wed, 5 Mar 2025 02:21:45 +0100 [thread overview]
Message-ID: <20250305012157.96463-31-philmd@linaro.org> (raw)
In-Reply-To: <20250305012157.96463-1-philmd@linaro.org>
From: BALATON Zoltan <balaton@eik.bme.hu>
Add named constants for register bit values that should make it easier
to understand what these mean.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20250224141026.3B36C4E6010@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/misc/macio/gpio.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/hw/misc/macio/gpio.c b/hw/misc/macio/gpio.c
index 4364afc84af..e87bfca1f5d 100644
--- a/hw/misc/macio/gpio.c
+++ b/hw/misc/macio/gpio.c
@@ -34,6 +34,11 @@
#include "qemu/module.h"
#include "trace.h"
+enum MacioGPIORegisterBits {
+ OUT_DATA = 1,
+ IN_DATA = 2,
+ OUT_ENABLE = 4,
+};
void macio_set_gpio(MacIOGPIOState *s, uint32_t gpio, bool state)
{
@@ -41,14 +46,14 @@ void macio_set_gpio(MacIOGPIOState *s, uint32_t gpio, bool state)
trace_macio_set_gpio(gpio, state);
- if (s->gpio_regs[gpio] & 4) {
+ if (s->gpio_regs[gpio] & OUT_ENABLE) {
qemu_log_mask(LOG_GUEST_ERROR,
"GPIO: Setting GPIO %d while it's an output\n", gpio);
}
- new_reg = s->gpio_regs[gpio] & ~2;
+ new_reg = s->gpio_regs[gpio] & ~IN_DATA;
if (state) {
- new_reg |= 2;
+ new_reg |= IN_DATA;
}
if (new_reg == s->gpio_regs[gpio]) {
@@ -107,12 +112,12 @@ static void macio_gpio_write(void *opaque, hwaddr addr, uint64_t value,
addr -= 8;
if (addr < 36) {
- value &= ~2;
+ value &= ~IN_DATA;
- if (value & 4) {
- ibit = (value & 1) << 1;
+ if (value & OUT_ENABLE) {
+ ibit = (value & OUT_DATA) << 1;
} else {
- ibit = s->gpio_regs[addr] & 2;
+ ibit = s->gpio_regs[addr] & IN_DATA;
}
s->gpio_regs[addr] = value | ibit;
--
2.47.1
next prev parent reply other threads:[~2025-03-05 1:35 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-05 1:21 [PULL 00/41] Misc HW patches for 2025-03-05 Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 01/41] hw/intc: Remove TCG dependency on ARM_GICV3 Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 02/41] hw/misc/pvpanic: Add MMIO interface Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 03/41] hw: Add vmapple subdir Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 04/41] hw/vmapple/aes: Introduce aes engine Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 05/41] hw/vmapple/bdif: Introduce vmapple backdoor interface Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 06/41] hw/vmapple/cfg: Introduce vmapple cfg region Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 07/41] hw/vmapple/virtio-blk: Add support for apple virtio-blk Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 08/41] hw/usb/hcd-xhci-pci: Adds property for disabling mapping in IRQ mode Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 09/41] hw/vmapple/vmapple: Add vmapple machine type Philippe Mathieu-Daudé
2025-03-10 1:22 ` Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 10/41] hw/ppc/spapr: Restrict part of PAGE_INIT hypercall to TCG Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 11/41] hw/acpi/ghes: Make ghes_record_cper_errors() static Philippe Mathieu-Daudé
2025-03-06 22:36 ` Mauro Carvalho Chehab
2025-03-07 12:41 ` Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 12/41] hw/arm: Do not expose the virt machine on Xen-only binary Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 13/41] hw/xen: Link XenPVH with GPEX PCIe bridge Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 14/41] hw/xen/xen-pvh: Reduce included headers Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 15/41] hw/xen/xen-hvm: " Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 16/41] hw/xen/xen-bus: " Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 17/41] hw/xen/xen-legacy-backend: Remove unused 'net/net.h' header Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 18/41] hw/net/fsl_etsec: Set eTSEC device description and category Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 19/41] hw/char/pl011: Warn when using disabled receiver Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 20/41] hw/char/pl011: Simplify a bit pl011_can_receive() Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 21/41] hw/char/pl011: Improve RX flow tracing events Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 22/41] hw/char/pl011: Really use RX FIFO depth Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 23/41] hw/char/bcm2835_aux: " Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 24/41] hw/char/imx_serial: " Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 25/41] hw/char/mcf_uart: Use FIFO_DEPTH definition instead of magic values Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 26/41] hw/char/mcf_uart: Really use RX FIFO depth Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 27/41] hw/char/sh_serial: Return correct number of empty RX FIFO elements Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 28/41] hw/char/sifive_uart: Free fifo on unrealize Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 29/41] hw/misc/macio: Improve trace logs Philippe Mathieu-Daudé
2025-03-05 1:21 ` Philippe Mathieu-Daudé [this message]
2025-03-05 1:21 ` [PULL 31/41] hw/ufs: Add temperature event notification support Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 32/41] tests/qtest/ufs-test: Add test code for the temperature feature Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 33/41] hw/arm/omap1: Convert raw printfs to qemu_log_mask() Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 34/41] hw/arm/omap1: Drop ALMDEBUG ifdeffed out code Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 35/41] hw/arm/omap1: Convert information printfs to tracepoints Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 36/41] hw/arm/omap_sx1: Remove ifdeffed out debug printf Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 37/41] hw/arm/versatilepb: Convert printfs to LOG_GUEST_ERROR Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 38/41] hw/nvram/eeprom_at24c: Use OBJECT_DECLARE_SIMPLE_TYPE Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 39/41] hw/nvram/eeprom_at24c: Remove ERR macro that calls fprintf to stderr Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 40/41] hw/nvram/eeprom_at24c: Remove memset after g_malloc0 Philippe Mathieu-Daudé
2025-03-05 1:21 ` [PULL 41/41] hw/nvram/eeprom_at24c: Reorganise init to avoid overwriting values Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250305012157.96463-31-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=balaton@eik.bme.hu \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).