[PULL 33/41] hw/arm/omap1: Convert raw printfs to qemu_log_mask()

["Philippe Mathieu-Daudé" <philmd@linaro.org>]

From: Peter Maydell <peter.maydell@linaro.org>

omap1.c is very old code, and it contains numerous calls direct to
printf() for various error and information cases.

In this commit, convert the printf() calls that are for either guest
error or unimplemented functionality to qemu_log_mask() calls.

This leaves the printf() calls that are informative or which are
ifdeffed-out debug statements untouched.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250227170117.1726895-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/arm/omap1.c | 48 +++++++++++++++++++++++++++++++-----------------
 1 file changed, 31 insertions(+), 17 deletions(-)

diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c
index ca2eb0d1576..3c0ce5e0979 100644
--- a/hw/arm/omap1.c
+++ b/hw/arm/omap1.c
@@ -2559,8 +2559,9 @@ static void omap_rtc_interrupts_update(struct omap_rtc_s *s)
 static void omap_rtc_alarm_update(struct omap_rtc_s *s)
 {
     s->alarm_ti = mktimegm(&s->alarm_tm);
-    if (s->alarm_ti == -1)
-        printf("%s: conversion failed\n", __func__);
+    if (s->alarm_ti == -1) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: conversion failed\n", __func__);
+    }
 }
 
 static uint64_t omap_rtc_read(void *opaque, hwaddr addr, unsigned size)
@@ -3024,8 +3025,9 @@ static void omap_mcbsp_source_tick(void *opaque)
 
     if (!s->rx_rate)
         return;
-    if (s->rx_req)
-        printf("%s: Rx FIFO overrun\n", __func__);
+    if (s->rx_req) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Rx FIFO overrun\n", __func__);
+    }
 
     s->rx_req = s->rx_rate << bps[(s->rcr[0] >> 5) & 7];
 
@@ -3070,8 +3072,9 @@ static void omap_mcbsp_sink_tick(void *opaque)
 
     if (!s->tx_rate)
         return;
-    if (s->tx_req)
-        printf("%s: Tx FIFO underrun\n", __func__);
+    if (s->tx_req) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Tx FIFO underrun\n", __func__);
+    }
 
     s->tx_req = s->tx_rate << bps[(s->xcr[0] >> 5) & 7];
 
@@ -3173,7 +3176,7 @@ static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr,
         /* Fall through.  */
     case 0x02:	/* DRR1 */
         if (s->rx_req < 2) {
-            printf("%s: Rx FIFO underrun\n", __func__);
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: Rx FIFO underrun\n", __func__);
             omap_mcbsp_rx_done(s);
         } else {
             s->tx_req -= 2;
@@ -3278,8 +3281,9 @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr,
             }
             if (s->tx_req < 2)
                 omap_mcbsp_tx_done(s);
-        } else
-            printf("%s: Tx FIFO overrun\n", __func__);
+        } else {
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: Tx FIFO overrun\n", __func__);
+        }
         return;
 
     case 0x08:	/* SPCR2 */
@@ -3293,8 +3297,11 @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr,
     case 0x0a:	/* SPCR1 */
         s->spcr[0] &= 0x0006;
         s->spcr[0] |= 0xf8f9 & value;
-        if (value & (1 << 15))				/* DLB */
-            printf("%s: Digital Loopback mode enable attempt\n", __func__);
+        if (value & (1 << 15)) {                        /* DLB */
+            qemu_log_mask(LOG_UNIMP,
+                          "%s: Digital Loopback mode enable attempt\n",
+                          __func__);
+        }
         if (~value & 1) {				/* RRST */
             s->spcr[0] &= ~6;
             s->rx_req = 0;
@@ -3325,13 +3332,19 @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr,
         return;
     case 0x18:	/* MCR2 */
         s->mcr[1] = value & 0x03e3;
-        if (value & 3)					/* XMCM */
-            printf("%s: Tx channel selection mode enable attempt\n", __func__);
+        if (value & 3) {                                /* XMCM */
+            qemu_log_mask(LOG_UNIMP,
+                          "%s: Tx channel selection mode enable attempt\n",
+                          __func__);
+        }
         return;
     case 0x1a:	/* MCR1 */
         s->mcr[0] = value & 0x03e1;
-        if (value & 1)					/* RMCM */
-            printf("%s: Rx channel selection mode enable attempt\n", __func__);
+        if (value & 1) {                                /* RMCM */
+            qemu_log_mask(LOG_UNIMP,
+                          "%s: Rx channel selection mode enable attempt\n",
+                          __func__);
+        }
         return;
     case 0x1c:	/* RCERA */
         s->rcer[0] = value & 0xffff;
@@ -3412,8 +3425,9 @@ static void omap_mcbsp_writew(void *opaque, hwaddr addr,
             }
             if (s->tx_req < 4)
                 omap_mcbsp_tx_done(s);
-        } else
-            printf("%s: Tx FIFO overrun\n", __func__);
+        } else {
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: Tx FIFO overrun\n", __func__);
+        }
         return;
     }
 
-- 
2.47.1