From: Jamin Lin via <qemu-devel@nongnu.org>
To: "Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"open list:All patches CC here" <qemu-devel@nongnu.org>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>
Cc: jamin_lin@aspeedtech.com, troy_lee@aspeedtech.com,
"Cédric Le Goater" <clg@redhat.com>
Subject: [PATCH v6 16/29] hw/intc/aspeed: Add Support for Multi-Output IRQ Handling
Date: Fri, 7 Mar 2025 11:59:25 +0800 [thread overview]
Message-ID: <20250307035945.3698802-17-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20250307035945.3698802-1-jamin_lin@aspeedtech.com>
This update introduces support for handling multi-output IRQs in the AST2700
interrupt controller (INTC), specifically for GICINT192_201. GICINT192_201 maps
1:10 to input IRQ 0 and output IRQs 0 to 9. Each status bit corresponds to a
specific IRQ.
Implemented "aspeed_intc_set_irq_handler_multi_outpins" to handle IRQs with
multiple output pins. Introduced "aspeed_intc_status_handler_multi_outpins"
for managing status registers associated with multi-output IRQs.
Added new IRQ definitions for GICINT192_201 in INTC.
Adjusted the IRQ array to accommodate 10 input pins and 19 output pins,
aligning with the new GICINT192_201 mappings.
|------------------------------|
| INTC |
|inpin[0:0]--------->outpin[0] |
|inpin[0:1]--------->outpin[1] |
|inpin[0:2]--------->outpin[2] |
|inpin[0:3]--------->outpin[3] |
orgates[0]-------> |inpin[0:4]--------->outpin[4] |
|inpin[0:5]--------->outpin[5] |
|inpin[0:6]--------->outpin[6] |
|inpin[0:7]--------->outpin[7] |
|inpin[0:8]--------->outpin[8] |
|inpin[0:9]--------->outpin[9] |
| |
orgates[1]------> |inpin[1]----------->outpin[10]|
orgates[2]------> |inpin[2]----------->outpin[11]|
orgates[3]------> |inpin[3]----------->outpin[12]|
orgates[4]------> |inpin[4]----------->outpin[13]|
orgates[5]------> |inpin[5]----------->outpin[14]|
orgates[6]------> |inpin[6]----------->outpin[15]|
orgates[7]------> |inpin[7]----------->outpin[16]|
orgates[8]------> |inpin[8]----------->outpin[17]|
orgates[9]------> |inpin[9]----------->outpin[18]|
|------------------------------|
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/intc/aspeed_intc.h | 4 +-
hw/intc/aspeed_intc.c | 149 ++++++++++++++++++++++++++++++----
hw/intc/trace-events | 1 +
3 files changed, 137 insertions(+), 17 deletions(-)
diff --git a/include/hw/intc/aspeed_intc.h b/include/hw/intc/aspeed_intc.h
index e6c3a27264..85df8c6be9 100644
--- a/include/hw/intc/aspeed_intc.h
+++ b/include/hw/intc/aspeed_intc.h
@@ -16,8 +16,8 @@
#define TYPE_ASPEED_2700_INTC TYPE_ASPEED_INTC "-ast2700"
OBJECT_DECLARE_TYPE(AspeedINTCState, AspeedINTCClass, ASPEED_INTC)
-#define ASPEED_INTC_MAX_INPINS 9
-#define ASPEED_INTC_MAX_OUTPINS 9
+#define ASPEED_INTC_MAX_INPINS 10
+#define ASPEED_INTC_MAX_OUTPINS 19
typedef struct AspeedINTCIRQ {
int inpin_idx;
diff --git a/hw/intc/aspeed_intc.c b/hw/intc/aspeed_intc.c
index 3aa97add8b..f2ca9237ea 100644
--- a/hw/intc/aspeed_intc.c
+++ b/hw/intc/aspeed_intc.c
@@ -39,6 +39,8 @@ REG32(GICINT135_EN, 0x700)
REG32(GICINT135_STATUS, 0x704)
REG32(GICINT136_EN, 0x800)
REG32(GICINT136_STATUS, 0x804)
+REG32(GICINT192_201_EN, 0xB00)
+REG32(GICINT192_201_STATUS, 0xB04)
static const AspeedINTCIRQ *aspeed_intc_get_irq(AspeedINTCClass *aic,
uint32_t reg)
@@ -112,9 +114,55 @@ static void aspeed_intc_set_irq_handler(AspeedINTCState *s,
}
}
+static void aspeed_intc_set_irq_handler_multi_outpins(AspeedINTCState *s,
+ const AspeedINTCIRQ *intc_irq, uint32_t select)
+{
+ const char *name = object_get_typename(OBJECT(s));
+ uint32_t status_reg;
+ int num_outpins;
+ int outpin_idx;
+ int inpin_idx;
+ int i;
+
+ num_outpins = intc_irq->num_outpins;
+ status_reg = intc_irq->status_reg;
+ outpin_idx = intc_irq->outpin_idx;
+ inpin_idx = intc_irq->inpin_idx;
+
+ for (i = 0; i < num_outpins; i++) {
+ if (select & BIT(i)) {
+ if (s->mask[inpin_idx] & BIT(i) ||
+ s->regs[status_reg] & BIT(i)) {
+ /*
+ * a. mask bit is not 0 means in ISR mode sources interrupt
+ * routine are executing.
+ * b. status bit is not 0 means previous source interrupt
+ * does not be executed, yet.
+ *
+ * save source interrupt to pending bit.
+ */
+ s->pending[inpin_idx] |= BIT(i);
+ trace_aspeed_intc_pending_irq(name, inpin_idx,
+ s->pending[inpin_idx]);
+ } else {
+ /*
+ * notify firmware which source interrupt are coming
+ * by setting status bit
+ */
+ s->regs[status_reg] |= BIT(i);
+ trace_aspeed_intc_trigger_irq(name, inpin_idx, outpin_idx + i,
+ s->regs[status_reg]);
+ aspeed_intc_update(s, inpin_idx, outpin_idx + i, 1);
+ }
+ }
+ }
+}
+
/*
- * GICINT128 to GICINT136 map 1:1 to input and output IRQs 0 to 8.
- * The value of input IRQ should be between 0 and the number of inputs.
+ * GICINT192_201 maps 1:10 to input IRQ 0 and output IRQs 0 to 9.
+ * GICINT128 to GICINT136 map 1:1 to input IRQs 1 to 9 and output
+ * IRQs 10 to 18. The value of input IRQ should be between 0 and
+ * the number of input pins.
*/
static void aspeed_intc_set_irq(void *opaque, int irq, int level)
{
@@ -124,12 +172,14 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
const AspeedINTCIRQ *intc_irq;
uint32_t select = 0;
uint32_t enable;
+ int num_outpins;
int inpin_idx;
int i;
assert(irq < aic->num_inpins);
intc_irq = &aic->irq_table[irq];
+ num_outpins = intc_irq->num_outpins;
inpin_idx = intc_irq->inpin_idx;
trace_aspeed_intc_set_irq(name, inpin_idx, level);
enable = s->enable[inpin_idx];
@@ -151,7 +201,11 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
}
trace_aspeed_intc_select(name, select);
- aspeed_intc_set_irq_handler(s, intc_irq, select);
+ if (num_outpins > 1) {
+ aspeed_intc_set_irq_handler_multi_outpins(s, intc_irq, select);
+ } else {
+ aspeed_intc_set_irq_handler(s, intc_irq, select);
+ }
}
static void aspeed_intc_enable_handler(AspeedINTCState *s, hwaddr offset,
@@ -261,6 +315,66 @@ static void aspeed_intc_status_handler(AspeedINTCState *s, hwaddr offset,
}
}
+static void aspeed_intc_status_handler_multi_outpins(AspeedINTCState *s,
+ hwaddr offset, uint64_t data)
+{
+ const char *name = object_get_typename(OBJECT(s));
+ AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+ const AspeedINTCIRQ *intc_irq;
+ uint32_t reg = offset >> 2;
+ int num_outpins;
+ int outpin_idx;
+ int inpin_idx;
+ int i;
+
+ if (!data) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid data 0\n", __func__);
+ return;
+ }
+
+ intc_irq = aspeed_intc_get_irq(aic, reg);
+ num_outpins = intc_irq->num_outpins;
+ outpin_idx = intc_irq->outpin_idx;
+ inpin_idx = intc_irq->inpin_idx;
+ assert(inpin_idx < aic->num_inpins);
+
+ /* clear status */
+ s->regs[reg] &= ~data;
+
+ /*
+ * The status registers are used for notify sources ISR are executed.
+ * If one source ISR is executed, it will clear one bit.
+ * If it clear all bits, it means to initialize this register status
+ * rather than sources ISR are executed.
+ */
+ if (data == 0xffffffff) {
+ return;
+ }
+
+ for (i = 0; i < num_outpins; i++) {
+ /* All source ISR executions are done from a specific bit */
+ if (data & BIT(i)) {
+ trace_aspeed_intc_all_isr_done_bit(name, inpin_idx, i);
+ if (s->pending[inpin_idx] & BIT(i)) {
+ /*
+ * Handle pending source interrupt.
+ * Notify firmware which source interrupt is pending
+ * by setting the status bit.
+ */
+ s->regs[reg] |= BIT(i);
+ s->pending[inpin_idx] &= ~BIT(i);
+ trace_aspeed_intc_trigger_irq(name, inpin_idx, outpin_idx + i,
+ s->regs[reg]);
+ aspeed_intc_update(s, inpin_idx, outpin_idx + i, 1);
+ } else {
+ /* clear irq for the specific bit */
+ trace_aspeed_intc_clear_irq(name, inpin_idx, outpin_idx + i, 0);
+ aspeed_intc_update(s, inpin_idx, outpin_idx + i, 0);
+ }
+ }
+ }
+}
+
static uint64_t aspeed_intc_read(void *opaque, hwaddr offset, unsigned int size)
{
AspeedINTCState *s = ASPEED_INTC(opaque);
@@ -293,6 +407,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
case R_GICINT134_EN:
case R_GICINT135_EN:
case R_GICINT136_EN:
+ case R_GICINT192_201_EN:
aspeed_intc_enable_handler(s, offset, data);
break;
case R_GICINT128_STATUS:
@@ -306,6 +421,9 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
case R_GICINT136_STATUS:
aspeed_intc_status_handler(s, offset, data);
break;
+ case R_GICINT192_201_STATUS:
+ aspeed_intc_status_handler_multi_outpins(s, offset, data);
+ break;
default:
s->regs[reg] = data;
break;
@@ -415,15 +533,16 @@ static const TypeInfo aspeed_intc_info = {
};
static AspeedINTCIRQ aspeed_2700_intc_irqs[ASPEED_INTC_MAX_INPINS] = {
- {0, 0, 1, R_GICINT128_EN, R_GICINT128_STATUS},
- {1, 1, 1, R_GICINT129_EN, R_GICINT129_STATUS},
- {2, 2, 1, R_GICINT130_EN, R_GICINT130_STATUS},
- {3, 3, 1, R_GICINT131_EN, R_GICINT131_STATUS},
- {4, 4, 1, R_GICINT132_EN, R_GICINT132_STATUS},
- {5, 5, 1, R_GICINT133_EN, R_GICINT133_STATUS},
- {6, 6, 1, R_GICINT134_EN, R_GICINT134_STATUS},
- {7, 7, 1, R_GICINT135_EN, R_GICINT135_STATUS},
- {8, 8, 1, R_GICINT136_EN, R_GICINT136_STATUS},
+ {0, 0, 10, R_GICINT192_201_EN, R_GICINT192_201_STATUS},
+ {1, 10, 1, R_GICINT128_EN, R_GICINT128_STATUS},
+ {2, 11, 1, R_GICINT129_EN, R_GICINT129_STATUS},
+ {3, 12, 1, R_GICINT130_EN, R_GICINT130_STATUS},
+ {4, 13, 1, R_GICINT131_EN, R_GICINT131_STATUS},
+ {5, 14, 1, R_GICINT132_EN, R_GICINT132_STATUS},
+ {6, 15, 1, R_GICINT133_EN, R_GICINT133_STATUS},
+ {7, 16, 1, R_GICINT134_EN, R_GICINT134_STATUS},
+ {8, 17, 1, R_GICINT135_EN, R_GICINT135_STATUS},
+ {9, 18, 1, R_GICINT136_EN, R_GICINT136_STATUS},
};
static void aspeed_2700_intc_class_init(ObjectClass *klass, void *data)
@@ -433,10 +552,10 @@ static void aspeed_2700_intc_class_init(ObjectClass *klass, void *data)
dc->desc = "ASPEED 2700 INTC Controller";
aic->num_lines = 32;
- aic->num_inpins = 9;
- aic->num_outpins = 9;
+ aic->num_inpins = 10;
+ aic->num_outpins = 19;
aic->mem_size = 0x4000;
- aic->nr_regs = 0x808 >> 2;
+ aic->nr_regs = 0xB08 >> 2;
aic->reg_offset = 0x1000;
aic->irq_table = aspeed_2700_intc_irqs;
aic->irq_table_count = ARRAY_SIZE(aspeed_2700_intc_irqs);
diff --git a/hw/intc/trace-events b/hw/intc/trace-events
index e97eea820b..913197a181 100644
--- a/hw/intc/trace-events
+++ b/hw/intc/trace-events
@@ -92,6 +92,7 @@ aspeed_intc_enable(const char *s, uint32_t value) "%s: Enable: 0x%x"
aspeed_intc_select(const char *s, uint32_t value) "%s: Select: 0x%x"
aspeed_intc_mask(const char *s, uint32_t change, uint32_t value) "%s: Mask: 0x%x: 0x%x"
aspeed_intc_unmask(const char *s, uint32_t change, uint32_t value) "%s: UnMask: 0x%x: 0x%x"
+aspeed_intc_all_isr_done_bit(const char *s, int inpin_idx, int bit) "%s: All source ISR execution are done from specific bit: %d-%d"
# arm_gic.c
gic_enable_irq(int irq) "irq %d enabled"
--
2.43.0
next prev parent reply other threads:[~2025-03-07 4:02 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-07 3:59 [PATCH v6 00/29] Support AST2700 A1 Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 01/29] hw/intc/aspeed: Support setting different memory size Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 02/29] hw/intc/aspeed: Rename status_addr and addr to status_reg and reg for clarity Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 03/29] hw/intc/aspeed: Introduce dynamic allocation for regs array Jamin Lin via
2025-03-07 7:23 ` Cédric Le Goater
2025-03-07 3:59 ` [PATCH v6 04/29] hw/intc/aspeed: Support setting different register size Jamin Lin via
2025-03-07 7:23 ` Cédric Le Goater
2025-03-07 3:59 ` [PATCH v6 05/29] hw/intc/aspeed: Reduce regs array size by adding a register sub-region Jamin Lin via
2025-03-07 7:22 ` Cédric Le Goater
2025-03-07 3:59 ` [PATCH v6 06/29] hw/intc/aspeed: Introduce helper functions for enable and status registers Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 07/29] hw/intc/aspeed: Add object type name to trace events for better debugging Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 08/29] hw/arm/aspeed: Rename IRQ table and machine name for AST2700 A0 Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 09/29] hw/arm/aspeed_ast27x0: Sort the IRQ table by IRQ number Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 10/29] hw/intc/aspeed: Support different memory region ops Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 11/29] hw/intc/aspeed: Rename num_ints to num_inpins for clarity Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 12/29] hw/intc/aspeed: Add support for multiple output pins in INTC Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 13/29] hw/intc/aspeed: Refactor INTC to support separate input and output pin indices Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 14/29] hw/intc/aspeed: Introduce AspeedINTCIRQ structure to save the irq index and register address Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 15/29] hw/intc/aspeed: Introduce IRQ handler function to reduce code duplication Jamin Lin via
2025-03-07 3:59 ` Jamin Lin via [this message]
2025-03-07 3:59 ` [PATCH v6 17/29] hw/intc/aspeed: Add Support for AST2700 INTCIO Controller Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 18/29] hw/misc/aspeed_scu: Add Support for AST2700/AST2750 A1 Silicon Revisions Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 19/29] hw/arm/aspeed_ast27x0.c Support AST2700 A1 GIC Interrupt Mapping Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 20/29] hw/arm/aspeed_ast27x0: Define an Array of AspeedINTCState with Two Instances Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 21/29] hw/arm/aspeed_ast27x0: Support two levels of INTC controllers for AST2700 A1 Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 22/29] hw/arm/aspeed_ast27x0: Add SoC Support " Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 23/29] hw/arm/aspeed: Add Machine " Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 24/29] hw/arm/aspeed_ast27x0: Sort the memmap table by mapping address Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 25/29] tests/functional/aspeed: Introduce start_ast2700_test API Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 26/29] tests/functional/aspeed: Update temperature hwmon path Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 27/29] tests/functional/aspeed: Update test ASPEED SDK v09.05 Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 28/29] tests/functional/aspeed: Add test case for AST2700 A1 Jamin Lin via
2025-03-07 3:59 ` [PATCH v6 29/29] docs/specs: Add aspeed-intc Jamin Lin via
2025-03-07 7:33 ` [PATCH v6 00/29] Support AST2700 A1 Cédric Le Goater
2025-03-07 7:36 ` Jamin Lin
2025-03-07 7:44 ` Cédric Le Goater
2025-03-07 7:56 ` Steven Lee
2025-03-07 8:08 ` Cédric Le Goater
2025-03-07 17:47 ` Nabih Estefan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250307035945.3698802-17-jamin_lin@aspeedtech.com \
--to=qemu-devel@nongnu.org \
--cc=andrew@codeconstruct.com.au \
--cc=clg@kaod.org \
--cc=clg@redhat.com \
--cc=jamin_lin@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=leetroy@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).