[PULL 19/46] hw/intc/aspeed: Rename status_addr and addr to status_reg and reg for clarity

["Cédric Le Goater" <clg@redhat.com>]

From: Jamin Lin <jamin_lin@aspeedtech.com>

Rename the variables "status_addr" to "status_reg" and "addr" to "reg" because
they are used as register index. This change makes the code more appropriate
and improves readability.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
 hw/intc/aspeed_intc.c | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/hw/intc/aspeed_intc.c b/hw/intc/aspeed_intc.c
index 033b574c1e24..465f41e4fd35 100644
--- a/hw/intc/aspeed_intc.c
+++ b/hw/intc/aspeed_intc.c
@@ -60,7 +60,7 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
 {
     AspeedINTCState *s = (AspeedINTCState *)opaque;
     AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
-    uint32_t status_addr = GICINT_STATUS_BASE + ((0x100 * irq) >> 2);
+    uint32_t status_reg = GICINT_STATUS_BASE + ((0x100 * irq) >> 2);
     uint32_t select = 0;
     uint32_t enable;
     int i;
@@ -92,7 +92,7 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
 
     trace_aspeed_intc_select(select);
 
-    if (s->mask[irq] || s->regs[status_addr]) {
+    if (s->mask[irq] || s->regs[status_reg]) {
         /*
          * a. mask is not 0 means in ISR mode
          * sources interrupt routine are executing.
@@ -108,8 +108,8 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
          * notify firmware which source interrupt are coming
          * by setting status register
          */
-        s->regs[status_addr] = select;
-        trace_aspeed_intc_trigger_irq(irq, s->regs[status_addr]);
+        s->regs[status_reg] = select;
+        trace_aspeed_intc_trigger_irq(irq, s->regs[status_reg]);
         aspeed_intc_update(s, irq, 1);
     }
 }
@@ -117,17 +117,17 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
 static uint64_t aspeed_intc_read(void *opaque, hwaddr offset, unsigned int size)
 {
     AspeedINTCState *s = ASPEED_INTC(opaque);
-    uint32_t addr = offset >> 2;
+    uint32_t reg = offset >> 2;
     uint32_t value = 0;
 
-    if (addr >= ASPEED_INTC_NR_REGS) {
+    if (reg >= ASPEED_INTC_NR_REGS) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
         return 0;
     }
 
-    value = s->regs[addr];
+    value = s->regs[reg];
     trace_aspeed_intc_read(offset, size, value);
 
     return value;
@@ -138,12 +138,12 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
 {
     AspeedINTCState *s = ASPEED_INTC(opaque);
     AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
-    uint32_t addr = offset >> 2;
+    uint32_t reg = offset >> 2;
     uint32_t old_enable;
     uint32_t change;
     uint32_t irq;
 
-    if (addr >= ASPEED_INTC_NR_REGS) {
+    if (reg >= ASPEED_INTC_NR_REGS) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
@@ -152,7 +152,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
 
     trace_aspeed_intc_write(offset, size, data);
 
-    switch (addr) {
+    switch (reg) {
     case R_GICINT128_EN:
     case R_GICINT129_EN:
     case R_GICINT130_EN:
@@ -177,7 +177,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
 
         /* disable all source interrupt */
         if (!data && !s->enable[irq]) {
-            s->regs[addr] = data;
+            s->regs[reg] = data;
             return;
         }
 
@@ -187,12 +187,12 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
         /* enable new source interrupt */
         if (old_enable != s->enable[irq]) {
             trace_aspeed_intc_enable(s->enable[irq]);
-            s->regs[addr] = data;
+            s->regs[reg] = data;
             return;
         }
 
         /* mask and unmask source interrupt */
-        change = s->regs[addr] ^ data;
+        change = s->regs[reg] ^ data;
         if (change & data) {
             s->mask[irq] &= ~change;
             trace_aspeed_intc_unmask(change, s->mask[irq]);
@@ -200,7 +200,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
             s->mask[irq] |= change;
             trace_aspeed_intc_mask(change, s->mask[irq]);
         }
-        s->regs[addr] = data;
+        s->regs[reg] = data;
         break;
     case R_GICINT128_STATUS:
     case R_GICINT129_STATUS:
@@ -220,7 +220,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
         }
 
         /* clear status */
-        s->regs[addr] &= ~data;
+        s->regs[reg] &= ~data;
 
         /*
          * These status registers are used for notify sources ISR are executed.
@@ -233,7 +233,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
         }
 
         /* All source ISR execution are done */
-        if (!s->regs[addr]) {
+        if (!s->regs[reg]) {
             trace_aspeed_intc_all_isr_done(irq);
             if (s->pending[irq]) {
                 /*
@@ -241,9 +241,9 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
                  * notify firmware which source interrupt are pending
                  * by setting status register
                  */
-                s->regs[addr] = s->pending[irq];
+                s->regs[reg] = s->pending[irq];
                 s->pending[irq] = 0;
-                trace_aspeed_intc_trigger_irq(irq, s->regs[addr]);
+                trace_aspeed_intc_trigger_irq(irq, s->regs[reg]);
                 aspeed_intc_update(s, irq, 1);
             } else {
                 /* clear irq */
@@ -253,7 +253,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
         }
         break;
     default:
-        s->regs[addr] = data;
+        s->regs[reg] = data;
         break;
     }
 
-- 
2.48.1