From: Nicholas Piggin <npiggin@gmail.com>
To: qemu-devel@nongnu.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
qemu-ppc@nongnu.org, Chalapathi V <chalapathi.v@linux.ibm.com>
Subject: [PULL 40/72] hw/ssi/pnv_spi: Put a limit to RDR match failures
Date: Tue, 11 Mar 2025 22:57:34 +1000 [thread overview]
Message-ID: <20250311125815.903177-41-npiggin@gmail.com> (raw)
In-Reply-To: <20250311125815.903177-1-npiggin@gmail.com>
From: Chalapathi V <chalapathi.v@linux.ibm.com>
There is a possibility that SPI controller can get into loop due to indefinite
RDR match failures. Hence put a limit to failures and stop the sequencer.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250303141328.23991-5-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
hw/ssi/pnv_spi.c | 10 ++++++++++
include/hw/ssi/pnv_spi.h | 1 +
2 files changed, 11 insertions(+)
diff --git a/hw/ssi/pnv_spi.c b/hw/ssi/pnv_spi.c
index 83221607c9..126070393e 100644
--- a/hw/ssi/pnv_spi.c
+++ b/hw/ssi/pnv_spi.c
@@ -20,6 +20,7 @@
#define PNV_SPI_OPCODE_LO_NIBBLE(x) (x & 0x0F)
#define PNV_SPI_MASKED_OPCODE(x) (x & 0xF0)
#define PNV_SPI_FIFO_SIZE 16
+#define RDR_MATCH_FAILURE_LIMIT 16
/*
* Macro from include/hw/ppc/fdt.h
@@ -872,18 +873,27 @@ static void operation_sequencer(PnvSpi *s)
rdr_matched = does_rdr_match(s);
if (rdr_matched) {
trace_pnv_spi_RDR_match("success");
+ s->fail_count = 0;
/* A match occurred, increment the sequencer index. */
seq_index++;
s->status = SETFIELD(SPI_STS_SEQ_FSM, s->status,
SEQ_STATE_INDEX_INCREMENT);
} else {
trace_pnv_spi_RDR_match("failed");
+ s->fail_count++;
/*
* Branch the sequencer to the index coded into the op
* code.
*/
seq_index = PNV_SPI_OPCODE_LO_NIBBLE(opcode);
}
+ if (s->fail_count >= RDR_MATCH_FAILURE_LIMIT) {
+ qemu_log_mask(LOG_GUEST_ERROR, "pnv_spi: RDR match failure"
+ " limit crossed %d times hence requesting "
+ "sequencer to stop.\n",
+ RDR_MATCH_FAILURE_LIMIT);
+ stop = true;
+ }
/*
* Regardless of where the branch ended up we want the
* sequencer to continue shifting so we have to clear
diff --git a/include/hw/ssi/pnv_spi.h b/include/hw/ssi/pnv_spi.h
index 6adb72dbb2..c591a0663d 100644
--- a/include/hw/ssi/pnv_spi.h
+++ b/include/hw/ssi/pnv_spi.h
@@ -40,6 +40,7 @@ typedef struct PnvSpi {
MemoryRegion xscom_spic_regs;
Fifo8 tx_fifo;
Fifo8 rx_fifo;
+ uint8_t fail_count; /* RDR Match failure counter */
/* SPI object number */
uint32_t spic_num;
uint32_t chip_id;
--
2.47.1
next prev parent reply other threads:[~2025-03-11 13:23 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-11 12:56 [PULL 00/72] ppc-for-10.0-1 queue Nicholas Piggin
2025-03-11 12:56 ` [PULL 01/72] ppc/ppc405: Remove tests Nicholas Piggin
2025-03-11 12:56 ` [PULL 02/72] ppc/ppc405: Remove boards Nicholas Piggin
2025-03-11 12:56 ` [PULL 03/72] hw/ppc: Deprecate 405 CPUs Nicholas Piggin
2025-03-11 12:56 ` [PULL 04/72] ppc/pnv: Update skiboot to 7.1-106 Nicholas Piggin
2025-03-11 12:56 ` [PULL 05/72] pseries: Update SLOF firmware image Nicholas Piggin
2025-03-11 12:57 ` [PULL 06/72] ppc/pnv/phb4: Add pervasive chiplet support to PHB4/5 Nicholas Piggin
2025-03-11 12:57 ` [PULL 07/72] ppc/pnv/homer: Fix OCC registers Nicholas Piggin
2025-03-11 12:57 ` [PULL 08/72] ppc/pnv/homer: Make dummy reads return 0 Nicholas Piggin
2025-03-11 12:57 ` [PULL 09/72] ppc/pnv/occ: Fix common area sensor offsets Nicholas Piggin
2025-03-13 7:57 ` Michael Tokarev
2025-03-11 12:57 ` [PULL 10/72] ppc/pnv/homer: class-based base and size Nicholas Piggin
2025-03-11 12:57 ` [PULL 11/72] ppc/pnv/occ: Better document OCCMISC bits Nicholas Piggin
2025-03-11 12:57 ` [PULL 12/72] ppc/pnv: Make HOMER memory a RAM region Nicholas Piggin
2025-03-11 12:57 ` [PULL 13/72] ppc/pnv/occ: Update pstate frequency tables Nicholas Piggin
2025-03-11 12:57 ` [PULL 14/72] ppc/pnv/occ: Add POWER10 OCC-OPAL data format Nicholas Piggin
2025-03-11 12:57 ` [PULL 15/72] ppc/pnv/occ: Implement a basic dynamic OCC model Nicholas Piggin
2025-03-11 12:57 ` [PULL 16/72] target/ppc: Add Power9/10 power management SPRs Nicholas Piggin
2025-03-11 12:57 ` [PULL 17/72] ppc/pnv: Support LPC host controller irqs other than serirqs Nicholas Piggin
2025-03-11 12:57 ` [PULL 18/72] ppc/pnv: raise no-response errors if an LPC transaction fails Nicholas Piggin
2025-03-11 12:57 ` [PULL 19/72] ppc/pnv: Implement LPC FW address space IDSEL Nicholas Piggin
2025-03-11 12:57 ` [PULL 20/72] ppc/pnv: Move PNOR to offset 0 in the ISA FW space Nicholas Piggin
2025-03-11 12:57 ` [PULL 21/72] ppc/pnv: Add a PNOR address and size sanity checks Nicholas Piggin
2025-03-11 12:57 ` [PULL 22/72] ppc/pnv: Add a default formatted PNOR image Nicholas Piggin
2025-03-11 12:57 ` [PULL 23/72] ppc/xive2: Update NVP save/restore for group attributes Nicholas Piggin
2025-03-11 12:57 ` [PULL 24/72] ppc/xive: Rename ipb_to_pipr() to xive_ipb_to_pipr() Nicholas Piggin
2025-03-11 12:57 ` [PULL 25/72] ppc/xive2: Add grouping level to notification Nicholas Piggin
2025-03-11 12:57 ` [PULL 26/72] ppc/xive2: Support group-matching when looking for target Nicholas Piggin
2025-03-11 12:57 ` [PULL 27/72] ppc/xive2: Add undelivered group interrupt to backlog Nicholas Piggin
2025-03-11 12:57 ` [PULL 28/72] ppc/xive2: Process group backlog when pushing an OS context Nicholas Piggin
2025-03-11 12:57 ` [PULL 29/72] ppc/xive2: Process group backlog when updating the CPPR Nicholas Piggin
2025-03-11 12:57 ` [PULL 30/72] qtest/xive: Add group-interrupt test Nicholas Piggin
2025-03-11 12:57 ` [PULL 31/72] ppc/xive2: Add support for MMIO operations on the NVPG/NVC BAR Nicholas Piggin
2025-03-11 12:57 ` [PULL 32/72] ppc/xive2: Support crowd-matching when looking for target Nicholas Piggin
2025-03-11 12:57 ` [PULL 33/72] pnv/xive2: Rename nvp_ to nvx_ if they can refer to NVP or NVGC Nicholas Piggin
2025-03-11 12:57 ` [PULL 34/72] ppc/xive2: Check crowd backlog when scanning group backlog Nicholas Piggin
2025-03-11 12:57 ` [PULL 35/72] qtest/xive: Change printf to g_test_message Nicholas Piggin
2025-03-11 12:57 ` [PULL 36/72] qtest/xive: Add test of pool interrupts Nicholas Piggin
2025-03-11 12:57 ` [PULL 37/72] hw/ssi/pnv_spi: Replace PnvXferBuffer with Fifo8 structure Nicholas Piggin
2025-03-11 12:57 ` [PULL 38/72] hw/ssi/pnv_spi: Use local var seq_index instead of get_seq_index() Nicholas Piggin
2025-03-11 12:57 ` [PULL 39/72] hw/ssi/pnv_spi: Make bus names distinct for each controllers of a socket Nicholas Piggin
2025-03-11 12:57 ` Nicholas Piggin [this message]
2025-03-11 12:57 ` [PULL 41/72] hw/ppc/spapr: Restrict CONFER hypercall to TCG Nicholas Piggin
2025-03-11 12:57 ` [PULL 42/72] ppc/pnv: Add new PowerPC Special Purpose Registers (RWMR) Nicholas Piggin
2025-03-11 12:57 ` [PULL 43/72] target/ppc: Make ppc_ldl_code() declaration public Nicholas Piggin
2025-03-11 12:57 ` [PULL 44/72] target/ppc: Move TCG specific exception handlers to tcg-excp_helper.c Nicholas Piggin
2025-03-11 12:57 ` [PULL 45/72] target/ppc: Move ppc_ldl_code() " Nicholas Piggin
2025-03-11 12:57 ` [PULL 46/72] target/ppc: Ensure powerpc_mcheck_checkstop() is only called under TCG Nicholas Piggin
2025-03-11 12:57 ` [PULL 47/72] target/ppc: Restrict powerpc_checkstop() to TCG Nicholas Piggin
2025-03-11 12:57 ` [PULL 48/72] target/ppc: Remove raise_exception_ra() Nicholas Piggin
2025-03-11 12:57 ` [PULL 49/72] target/ppc: Restrict exception helpers to TCG Nicholas Piggin
2025-03-11 12:57 ` [PULL 50/72] target/ppc: Restrict various common " Nicholas Piggin
2025-03-11 12:57 ` [PULL 51/72] target/ppc: Fix style in excp_helper.c Nicholas Piggin
2025-03-11 12:57 ` [PULL 52/72] target/ppc: Make powerpc_excp() prototype public Nicholas Piggin
2025-03-11 12:57 ` [PULL 53/72] target/ppc: Restrict ATTN / SCV / PMINSN helpers to TCG Nicholas Piggin
2025-03-11 12:57 ` [PULL 54/72] hw/ppc/spapr: Convert HPTE() macro as hpte_get_ptr() method Nicholas Piggin
2025-03-11 12:57 ` [PULL 55/72] hw/ppc/spapr: Convert HPTE_VALID() macro as hpte_is_valid() method Nicholas Piggin
2025-03-11 12:57 ` [PULL 56/72] hw/ppc/spapr: Convert HPTE_DIRTY() macro as hpte_is_dirty() method Nicholas Piggin
2025-03-11 12:57 ` [PULL 57/72] hw/ppc/spapr: Convert CLEAN_HPTE() macro as hpte_set_clean() method Nicholas Piggin
2025-03-11 12:57 ` [PULL 58/72] hw/ppc/spapr: Convert DIRTY_HPTE() macro as hpte_set_dirty() method Nicholas Piggin
2025-03-11 12:57 ` [PULL 59/72] hw/ppc/epapr: Do not swap ePAPR magic value Nicholas Piggin
2025-03-11 12:57 ` [PULL 60/72] ppc: Enable 2nd DAWR support on Power10 PowerNV machine Nicholas Piggin
2025-03-11 12:57 ` [PULL 61/72] ppc: spapr: Enable 2nd DAWR on Power10 pSeries machine Nicholas Piggin
2025-03-11 12:57 ` [PULL 62/72] spapr: nested: Add support for reporting Hostwide state counter Nicholas Piggin
2025-03-11 12:57 ` [PULL 63/72] target/ppc: fix timebase register reset state Nicholas Piggin
2025-03-11 12:57 ` [PULL 64/72] target/ppc: Wire up BookE ATB registers for e500 family Nicholas Piggin
2025-03-11 12:57 ` [PULL 65/72] target/ppc: Avoid warning message for zero process table entries Nicholas Piggin
2025-03-11 12:58 ` [PULL 66/72] spapr: Generate random HASHPKEYR for spapr machines Nicholas Piggin
2025-03-11 12:58 ` [PULL 67/72] ppc/amigaone: Simplify replacement dummy_fw Nicholas Piggin
2025-03-11 12:58 ` [PULL 68/72] ppc/amigaone: Implement NVRAM emulation Nicholas Piggin
2025-03-11 12:58 ` [PULL 69/72] ppc/amigaone: Add default environment Nicholas Piggin
2025-03-11 12:58 ` [PULL 70/72] ppc/amigaone: Add kernel and initrd support Nicholas Piggin
2025-06-16 10:07 ` Philippe Mathieu-Daudé
2025-06-16 10:38 ` BALATON Zoltan
2025-03-11 12:58 ` [PULL 71/72] ppc/amigaone: Add #defines for memory map constants Nicholas Piggin
2025-03-11 12:58 ` [PULL 72/72] docs/system/ppc/amigang.rst: Update for NVRAM emulation Nicholas Piggin
2025-03-13 2:34 ` [PULL 00/72] ppc-for-10.0-1 queue Stefan Hajnoczi
2025-03-13 6:13 ` Thomas Huth
2025-03-13 10:49 ` Philippe Mathieu-Daudé
2025-03-14 2:34 ` Nicholas Piggin
2025-03-14 6:19 ` Thomas Huth
2025-03-14 2:41 ` Nicholas Piggin
2025-03-13 7:05 ` Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250311125815.903177-41-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=chalapathi.v@linux.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).