qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Aditya Gupta <adityag@linux.ibm.com>
To: <qemu-devel@nongnu.org>
Cc: <qemu-ppc@nongnu.org>, Nicholas Piggin <npiggin@gmail.com>,
	Daniel Henrique Barboza <danielhb413@gmail.com>,
	Harsh Prateek Bora <harshpb@linux.ibm.com>,
	Sourabh Jain <sourabhjain@linux.ibm.com>,
	Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
	Hari Bathini <hbathini@linux.ibm.com>
Subject: [PATCH v2 3/8] hw/ppc: Trigger Fadump boot if fadump is registered
Date: Fri, 14 Mar 2025 00:53:36 +0530	[thread overview]
Message-ID: <20250313192341.132171-4-adityag@linux.ibm.com> (raw)
In-Reply-To: <20250313192341.132171-1-adityag@linux.ibm.com>

According to PAPR:

    R1–7.3.30–3. When the platform receives an ibm,os-term RTAS call, or
    on a system reset without an ibm,nmi-interlock RTAS call, if the
    platform has a dump structure registered through the
    ibm,configure-kernel-dump call, the platform must process each
    registered kernel dump section as required and, when available,
    present the dump structure information to the operating system
    through the “ibm,kernel-dump” property, updated with status for each
    dump section, until the dump has been invalidated through the
    ibm,configure-kernel-dump RTAS call.

If Fadump has been registered, trigger an Fadump boot (memory preserving
boot), if QEMU recieves a 'ibm,os-term' rtas call.

Implementing the fadump boot as:
    * pause all vcpus (will need to save registers later)
    * preserve memory regions specified by fadump (will be implemented
      in future)
    * do a memory preserving reboot (GUEST_RESET in QEMU doesn't clear
      the memory)

Memory regions registered by fadump will be handled in a later patch.

Note: Preserving memory regions is not implemented yet so on an
"ibm,os-term" call will just trigger a reboot in QEMU if fadump is
registered, and the second kernel will boot as a normal boot (not
fadump boot)

Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
---
 hw/ppc/spapr_fadump.c         | 77 +++++++++++++++++++++++++++++++++++
 hw/ppc/spapr_rtas.c           |  5 +++
 include/hw/ppc/spapr_fadump.h |  1 +
 3 files changed, 83 insertions(+)

diff --git a/hw/ppc/spapr_fadump.c b/hw/ppc/spapr_fadump.c
index 9c7fb9e12b16..fedd2cde9a4f 100644
--- a/hw/ppc/spapr_fadump.c
+++ b/hw/ppc/spapr_fadump.c
@@ -7,6 +7,7 @@
 #include "qemu/osdep.h"
 #include "qemu/log.h"
 #include "hw/ppc/spapr.h"
+#include "system/cpus.h"
 
 /*
  * Handle the "FADUMP_CMD_REGISTER" command in 'ibm,configure-kernel-dump'
@@ -121,3 +122,79 @@ uint32_t do_fadump_register(SpaprMachineState *spapr, target_ulong args)
 
     return RTAS_OUT_SUCCESS;
 }
+
+/* Preserve the memory locations registered for fadump */
+static bool fadump_preserve_mem(void)
+{
+    /*
+     * TODO: Implement preserving memory regions requested during fadump
+     * registration
+     */
+    return false;
+}
+
+/*
+ * Trigger a fadump boot, ie. next boot will be a crashkernel/fadump boot
+ * with fadump dump active.
+ *
+ * This is triggered by ibm,os-term RTAS call, if fadump was registered.
+ *
+ * It preserves the memory and sets 'FADUMP_STATUS_DUMP_TRIGGERED' as
+ * fadump status, which can be used later to add the "ibm,kernel-dump"
+ * device tree node as presence of 'FADUMP_STATUS_DUMP_TRIGGERED' signifies
+ * next boot as fadump boot in our case
+ */
+void trigger_fadump_boot(SpaprMachineState *spapr, target_ulong spapr_retcode)
+{
+    FadumpSectionHeader *header = &spapr->registered_fdm.header;
+
+    pause_all_vcpus();
+
+    /* Preserve the memory locations registered for fadump */
+    if (!fadump_preserve_mem()) {
+        /* Failed to preserve the registered memory regions */
+        rtas_st(spapr_retcode, 0, RTAS_OUT_HW_ERROR);
+
+        /* Cause a reboot */
+        qemu_system_guest_panicked(NULL);
+        return;
+    }
+
+    /*
+     * Mark next boot as fadump boot
+     *
+     * Note: These is some bit of assumption involved here, as PAPR doesn't
+     * specify any use of the dump status flags, nor does the kernel use it
+     *
+     * But from description in Table 136 in PAPR v2.13, it looks like:
+     *   FADUMP_STATUS_DUMP_TRIGGERED
+     *      = Dump was triggered by the previous system boot (PAPR says)
+     *      = Next boot will be a fadump boot (My perception)
+     *
+     *   FADUMP_STATUS_DUMP_PERFORMED
+     *      = Dump performed (Set to 0 by caller of the
+     *        ibm,configure-kernel-dump call) (PAPR says)
+     *      = Firmware has performed the copying/dump of requested regions
+     *        (My perception)
+     *      = Dump is active for the next boot (My perception)
+     */
+    header->dump_status_flag = cpu_to_be16(
+            FADUMP_STATUS_DUMP_TRIGGERED |  /* Next boot will be fadump boot */
+            FADUMP_STATUS_DUMP_PERFORMED    /* Dump is active */
+    );
+
+    /* Reset fadump_registered for next boot */
+    spapr->fadump_registered = false;
+    spapr->fadump_dump_active = true;
+
+    /*
+     * Then do a guest reset
+     *
+     * Requirement:
+     * GUEST_RESET is expected to NOT clear the memory, as is the case when
+     * this is merged
+     */
+    qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
+
+    rtas_st(spapr_retcode, 0, RTAS_OUT_SUCCESS);
+}
diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c
index 0454938a01e9..14b954a05109 100644
--- a/hw/ppc/spapr_rtas.c
+++ b/hw/ppc/spapr_rtas.c
@@ -412,6 +412,11 @@ static void rtas_ibm_os_term(PowerPCCPU *cpu,
     target_ulong msgaddr = rtas_ld(args, 0);
     char msg[512];
 
+    if (spapr->fadump_registered) {
+        /* If fadump boot works, control won't come back here */
+        return trigger_fadump_boot(spapr, rets);
+    }
+
     cpu_physical_memory_read(msgaddr, msg, sizeof(msg) - 1);
     msg[sizeof(msg) - 1] = 0;
 
diff --git a/include/hw/ppc/spapr_fadump.h b/include/hw/ppc/spapr_fadump.h
index 6abbcb44f353..071608cda088 100644
--- a/include/hw/ppc/spapr_fadump.h
+++ b/include/hw/ppc/spapr_fadump.h
@@ -66,4 +66,5 @@ struct FadumpMemStruct {
 };
 
 uint32_t do_fadump_register(struct SpaprMachineState *, target_ulong);
+void     trigger_fadump_boot(struct SpaprMachineState *, target_ulong);
 #endif /* PPC_SPAPR_FADUMP_H */
-- 
2.48.1



  parent reply	other threads:[~2025-03-13 19:25 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-13 19:23 [PATCH v2 0/8] Implement Firmware Assisted Dump for PSeries Aditya Gupta
2025-03-13 19:23 ` [PATCH v2 1/8] hw/ppc: Implement skeleton code for fadump in PSeries Aditya Gupta
2025-03-13 19:23 ` [PATCH v2 2/8] hw/ppc: Implement fadump register command Aditya Gupta
2025-03-13 19:23 ` Aditya Gupta [this message]
2025-03-13 19:23 ` [PATCH v2 4/8] hw/ppc: Preserve memory regions registered for fadump Aditya Gupta
2025-03-13 19:23 ` [PATCH v2 5/8] hw/ppc: Implement saving CPU state in Fadump Aditya Gupta
2025-03-13 19:23 ` [PATCH v2 6/8] hw/ppc: Pass dump-sizes property for fadump in device tree Aditya Gupta
2025-03-13 19:23 ` [PATCH v2 7/8] hw/ppc: Enable fadump for PSeries Aditya Gupta
2025-03-13 19:23 ` [PATCH v2 8/8] tests/functional: Add test for fadump in PSeries Aditya Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250313192341.132171-4-adityag@linux.ibm.com \
    --to=adityag@linux.ibm.com \
    --cc=danielhb413@gmail.com \
    --cc=harshpb@linux.ibm.com \
    --cc=hbathini@linux.ibm.com \
    --cc=mahesh@linux.ibm.com \
    --cc=npiggin@gmail.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=sourabhjain@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).