* [PULL 01/12] qapi/block-core: Improve x-blockdev-change documentation
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-14 10:10 ` [PULL 02/12] docs/qapi_domain: isolate TYPE_CHECKING imports Markus Armbruster
` (11 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, Alberto Garcia
The description of feature @unstable is three paragraphs. The second
and third became part of the description by accident in commit
9fb49daabfb (qapi: Mark unstable QMP parts with feature 'unstable').
The second paragraph describes a defect in terms of the
implementation. Fine, but doesn't belong into user-facing
documentation. Turn it into a TODO section.
Rewrite everything else for clarity and completeness.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250311131715.1296101-1-armbru@redhat.com>
Acked-by: Alberto Garcia <berto@igalia.com>
---
qapi/block-core.json | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index ee6eccc68c..b1937780e1 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -5913,35 +5913,31 @@
##
# @x-blockdev-change:
#
-# Dynamically reconfigure the block driver state graph. It can be
-# used to add, remove, insert or replace a graph node. Currently only
-# the Quorum driver implements this feature to add or remove its
-# child. This is useful to fix a broken quorum child.
+# Dynamically reconfigure the block driver state graph.
#
-# If @node is specified, it will be inserted under @parent. @child
-# may not be specified in this case. If both @parent and @child are
-# specified but @node is not, @child will be detached from @parent.
+# Currently only supports adding and deleting quorum children. A
+# child will be added at the end of the list of children. Its
+# contents *must* be consistent with the other childrens' contents.
+# Deleting a child that is not last in the list of children is
+# problematic, because it "renumbers" the children following it.
#
# @parent: the id or name of the parent node.
#
-# @child: the name of a child under the given parent node.
+# @child: the name of a child to be deleted. Mutually exclusive with
+# @node.
#
-# @node: the name of the node that will be added.
+# @node: the name of the node to be added. Mutually exclusive with
+# @child.
#
# Features:
#
-# @unstable: This command is experimental, and its API is not stable.
-# It does not support all kinds of operations, all kinds of
-# children, nor all block drivers.
+# @unstable: This command is experimental.
#
-# FIXME Removing children from a quorum node means introducing
+# TODO: Removing children from a quorum node means introducing
# gaps in the child indices. This cannot be represented in the
# 'children' list of BlockdevOptionsQuorum, as returned by
# .bdrv_refresh_filename().
#
-# Warning: The data in a new quorum child MUST be consistent with
-# that of the rest of the array.
-#
# Since: 2.7
#
# .. qmp-example::
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL 02/12] docs/qapi_domain: isolate TYPE_CHECKING imports
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
2025-03-14 10:10 ` [PULL 01/12] qapi/block-core: Improve x-blockdev-change documentation Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-14 10:10 ` [PULL 03/12] docs/qapi-domain: always store fully qualified name in signode Markus Armbruster
` (10 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, John Snow
From: John Snow <jsnow@redhat.com>
When using the annotations feature, type hints do not need to be
imported at runtime, only at type check time. Move type-check-only
imports into a conditional to reduce the number of imports needed at
runtime.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-2-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
docs/sphinx/qapi_domain.py | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/docs/sphinx/qapi_domain.py b/docs/sphinx/qapi_domain.py
index 7ff618d8cd..d52e7df7bc 100644
--- a/docs/sphinx/qapi_domain.py
+++ b/docs/sphinx/qapi_domain.py
@@ -9,15 +9,9 @@
from typing import (
TYPE_CHECKING,
- AbstractSet,
- Any,
- Dict,
- Iterable,
List,
NamedTuple,
- Optional,
Tuple,
- Union,
cast,
)
@@ -34,7 +28,6 @@
SpaceNode,
)
from sphinx import addnodes
-from sphinx.addnodes import desc_signature, pending_xref
from sphinx.directives import ObjectDescription
from sphinx.domains import (
Domain,
@@ -49,13 +42,24 @@
if TYPE_CHECKING:
+ from typing import (
+ AbstractSet,
+ Any,
+ Dict,
+ Iterable,
+ Optional,
+ Union,
+ )
+
from docutils.nodes import Element, Node
+ from sphinx.addnodes import desc_signature, pending_xref
from sphinx.application import Sphinx
from sphinx.builders import Builder
from sphinx.environment import BuildEnvironment
from sphinx.util.typing import OptionSpec
+
logger = logging.getLogger(__name__)
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL 03/12] docs/qapi-domain: always store fully qualified name in signode
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
2025-03-14 10:10 ` [PULL 01/12] qapi/block-core: Improve x-blockdev-change documentation Markus Armbruster
2025-03-14 10:10 ` [PULL 02/12] docs/qapi_domain: isolate TYPE_CHECKING imports Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-14 10:10 ` [PULL 04/12] docs/qapi_domain: add namespace support to FQN Markus Armbruster
` (9 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, John Snow
From: John Snow <jsnow@redhat.com>
Currently, only the definition name is stored in the tree metadata; but
the node property is confusingly called "fullname". Rectify this by
always storing the FQN in the tree metadata.
... While we're here, re-organize the code in preparation for namespace
support to make it a bit easier to add additional components of the
FQN. With this change, there is now extremely little code left that's
taken directly from the Python domain :)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-3-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
docs/sphinx/qapi_domain.py | 64 +++++++++++++++++++++++++-------------
1 file changed, 42 insertions(+), 22 deletions(-)
diff --git a/docs/sphinx/qapi_domain.py b/docs/sphinx/qapi_domain.py
index d52e7df7bc..6b23fc73ef 100644
--- a/docs/sphinx/qapi_domain.py
+++ b/docs/sphinx/qapi_domain.py
@@ -178,6 +178,25 @@ def get_index_text(self, name: Signature) -> Tuple[str, str]:
# NB: this is used for the global index, not the QAPI index.
return ("single", f"{name} (QMP {self.objtype})")
+ def _get_context(self) -> str:
+ modname = self.options.get(
+ "module", self.env.ref_context.get("qapi:module", "")
+ )
+ assert isinstance(modname, str)
+ return modname
+
+ def _get_fqn(self, name: Signature) -> str:
+ modname = self._get_context()
+
+ # If we're documenting a module, don't include the module as
+ # part of the FQN; we ARE the module!
+ if self.objtype == "module":
+ modname = ""
+
+ if modname:
+ name = f"{modname}.{name}"
+ return name
+
def add_target_and_index(
self, name: Signature, sig: str, signode: desc_signature
) -> None:
@@ -187,14 +206,8 @@ def add_target_and_index(
assert self.objtype
- # If we're documenting a module, don't include the module as
- # part of the FQN.
- modname = ""
- if self.objtype != "module":
- modname = self.options.get(
- "module", self.env.ref_context.get("qapi:module")
- )
- fullname = (modname + "." if modname else "") + name
+ if not (fullname := signode.get("fullname", "")):
+ fullname = self._get_fqn(name)
node_id = make_id(
self.env, self.state.document, self.objtype, fullname
@@ -213,18 +226,21 @@ def add_target_and_index(
(arity, indextext, node_id, "", None)
)
+ @staticmethod
+ def split_fqn(name: str) -> Tuple[str, str]:
+ if "." in name:
+ module, name = name.split(".")
+ else:
+ module = ""
+
+ return (module, name)
+
def _object_hierarchy_parts(
self, sig_node: desc_signature
) -> Tuple[str, ...]:
if "fullname" not in sig_node:
return ()
- modname = sig_node.get("module")
- fullname = sig_node["fullname"]
-
- if modname:
- return (modname, *fullname.split("."))
-
- return tuple(fullname.split("."))
+ return self.split_fqn(sig_node["fullname"])
def _toc_entry_name(self, sig_node: desc_signature) -> str:
# This controls the name in the TOC and on the sidebar.
@@ -235,13 +251,19 @@ def _toc_entry_name(self, sig_node: desc_signature) -> str:
return ""
config = self.env.app.config
- *parents, name = toc_parts
+ modname, name = toc_parts
+
if config.toc_object_entries_show_parents == "domain":
- return sig_node.get("fullname", name)
+ ret = name
+ if modname and modname != self.env.ref_context.get(
+ "qapi:module", ""
+ ):
+ ret = f"{modname}.{name}"
+ return ret
if config.toc_object_entries_show_parents == "hide":
return name
if config.toc_object_entries_show_parents == "all":
- return ".".join(parents + [name])
+ return sig_node.get("fullname", name)
return ""
@@ -312,11 +334,9 @@ def handle_signature(self, sig: str, signode: desc_signature) -> Signature:
As such, the only argument here is "sig", which is just the QAPI
definition name.
"""
- modname = self.options.get(
- "module", self.env.ref_context.get("qapi:module")
- )
+ modname = self._get_context()
- signode["fullname"] = sig
+ signode["fullname"] = self._get_fqn(sig)
signode["module"] = modname
sig_prefix = self.get_signature_prefix()
if sig_prefix:
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL 04/12] docs/qapi_domain: add namespace support to FQN
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
` (2 preceding siblings ...)
2025-03-14 10:10 ` [PULL 03/12] docs/qapi-domain: always store fully qualified name in signode Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-14 10:10 ` [PULL 05/12] docs/qapi-domain: add :namespace: override option Markus Armbruster
` (8 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, John Snow
From: John Snow <jsnow@redhat.com>
This patch adds a namespace component to the "Fully Qualified Name", in
the form of "domain:module.name". As there are no namespace directives
or options yet, this component will simply be empty as of this patch.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-4-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
docs/sphinx/qapi_domain.py | 35 +++++++++++++++++++++++++++--------
1 file changed, 27 insertions(+), 8 deletions(-)
diff --git a/docs/sphinx/qapi_domain.py b/docs/sphinx/qapi_domain.py
index 6b23fc73ef..48a082d489 100644
--- a/docs/sphinx/qapi_domain.py
+++ b/docs/sphinx/qapi_domain.py
@@ -178,15 +178,18 @@ def get_index_text(self, name: Signature) -> Tuple[str, str]:
# NB: this is used for the global index, not the QAPI index.
return ("single", f"{name} (QMP {self.objtype})")
- def _get_context(self) -> str:
+ def _get_context(self) -> Tuple[str, str]:
+ namespace = self.options.get(
+ "namespace", self.env.ref_context.get("qapi:namespace", "")
+ )
modname = self.options.get(
"module", self.env.ref_context.get("qapi:module", "")
)
- assert isinstance(modname, str)
- return modname
+
+ return namespace, modname
def _get_fqn(self, name: Signature) -> str:
- modname = self._get_context()
+ namespace, modname = self._get_context()
# If we're documenting a module, don't include the module as
# part of the FQN; we ARE the module!
@@ -195,6 +198,8 @@ def _get_fqn(self, name: Signature) -> str:
if modname:
name = f"{modname}.{name}"
+ if namespace:
+ name = f"{namespace}:{name}"
return name
def add_target_and_index(
@@ -227,13 +232,18 @@ def add_target_and_index(
)
@staticmethod
- def split_fqn(name: str) -> Tuple[str, str]:
+ def split_fqn(name: str) -> Tuple[str, str, str]:
+ if ":" in name:
+ ns, name = name.split(":")
+ else:
+ ns = ""
+
if "." in name:
module, name = name.split(".")
else:
module = ""
- return (module, name)
+ return (ns, module, name)
def _object_hierarchy_parts(
self, sig_node: desc_signature
@@ -251,7 +261,7 @@ def _toc_entry_name(self, sig_node: desc_signature) -> str:
return ""
config = self.env.app.config
- modname, name = toc_parts
+ namespace, modname, name = toc_parts
if config.toc_object_entries_show_parents == "domain":
ret = name
@@ -259,6 +269,10 @@ def _toc_entry_name(self, sig_node: desc_signature) -> str:
"qapi:module", ""
):
ret = f"{modname}.{name}"
+ if namespace and namespace != self.env.ref_context.get(
+ "qapi:namespace", ""
+ ):
+ ret = f"{namespace}:{ret}"
return ret
if config.toc_object_entries_show_parents == "hide":
return name
@@ -334,10 +348,15 @@ def handle_signature(self, sig: str, signode: desc_signature) -> Signature:
As such, the only argument here is "sig", which is just the QAPI
definition name.
"""
- modname = self._get_context()
+ # No module or domain info allowed in the signature!
+ assert ":" not in sig
+ assert "." not in sig
+ namespace, modname = self._get_context()
signode["fullname"] = self._get_fqn(sig)
+ signode["namespace"] = namespace
signode["module"] = modname
+
sig_prefix = self.get_signature_prefix()
if sig_prefix:
signode += addnodes.desc_annotation(
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL 05/12] docs/qapi-domain: add :namespace: override option
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
` (3 preceding siblings ...)
2025-03-14 10:10 ` [PULL 04/12] docs/qapi_domain: add namespace support to FQN Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-14 10:10 ` [PULL 06/12] docs/qapi-domain: add qapi:namespace directive Markus Armbruster
` (7 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, John Snow
From: John Snow <jsnow@redhat.com>
Akin to the :module: override option, the :namespace: options allows you
to forcibly override the contextual namespace associatied with a
definition.
We don't necessarily actually need this, but I felt compelled to stick
close to how the Python domain works that offers context overrides.
As of this commit, it is possible to add e.g. ":namespace: QMP" to any
QAPI directive to forcibly associate that definition with a given
namespace.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-5-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
docs/devel/qapi-domain.rst | 2 ++
docs/sphinx/qapi_domain.py | 5 +++--
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/docs/devel/qapi-domain.rst b/docs/devel/qapi-domain.rst
index 1475870ca6..51b283277e 100644
--- a/docs/devel/qapi-domain.rst
+++ b/docs/devel/qapi-domain.rst
@@ -466,6 +466,8 @@ QAPI standard options
All QAPI directives -- *except* for module -- support these common options.
+* ``:namespace: name`` -- This option allows you to override the
+ namespace association of a given definition.
* ``:module: modname`` -- Borrowed from the Python domain, this option allows
you to override the module association of a given definition.
* ``:since: x.y`` -- Allows the documenting of "Since" information, which is
diff --git a/docs/sphinx/qapi_domain.py b/docs/sphinx/qapi_domain.py
index 48a082d489..6485c43206 100644
--- a/docs/sphinx/qapi_domain.py
+++ b/docs/sphinx/qapi_domain.py
@@ -294,8 +294,9 @@ class QAPIObject(QAPIDescription):
)
option_spec.update(
{
- # Borrowed from the Python domain:
- "module": directives.unchanged, # Override contextual module name
+ # Context overrides:
+ "namespace": directives.unchanged,
+ "module": directives.unchanged,
# These are QAPI originals:
"since": directives.unchanged,
"ifcond": directives.unchanged,
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL 06/12] docs/qapi-domain: add qapi:namespace directive
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
` (4 preceding siblings ...)
2025-03-14 10:10 ` [PULL 05/12] docs/qapi-domain: add :namespace: override option Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-14 10:10 ` [PULL 07/12] docs/qapidoc: add :namespace: option to qapi-doc directive Markus Armbruster
` (6 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, John Snow
From: John Snow <jsnow@redhat.com>
Add a new directive that marks the beginning of a QAPI "namespace", for
example; "QMP", "QGA" or "QSD". This directive will associate all
subsequent QAPI directives in a document with the specified
namespace. This does not change the visual display of any of the
definitions or index entries, but does change the "Fully Qualified Name"
inside the QAPI domain's object table. This allows for two different
"namespaces" to define entities with otherwise identical names -- which
will come in handy for documenting both QEMU QMP and the QEMU Storage
Daemon.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-6-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
docs/devel/qapi-domain.rst | 20 +++++++++++++++++++-
docs/sphinx/qapi_domain.py | 13 +++++++++++++
2 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/docs/devel/qapi-domain.rst b/docs/devel/qapi-domain.rst
index 51b283277e..73e13ab45c 100644
--- a/docs/devel/qapi-domain.rst
+++ b/docs/devel/qapi-domain.rst
@@ -464,7 +464,8 @@ removed in a future version.
QAPI standard options
---------------------
-All QAPI directives -- *except* for module -- support these common options.
+All QAPI directives -- *except* for namespace and module -- support
+these common options.
* ``:namespace: name`` -- This option allows you to override the
namespace association of a given definition.
@@ -482,6 +483,23 @@ All QAPI directives -- *except* for module -- support these common options.
production code.
+qapi:namespace
+--------------
+
+The ``qapi:namespace`` directive marks the start of a QAPI namespace. It
+does not take a content body, nor any options. All subsequent QAPI
+directives are associated with the most recent namespace. This affects
+the definition's "fully qualified name", allowing two different
+namespaces to create an otherwise identically named definition.
+
+Example::
+
+ .. qapi:namespace:: QMP
+
+
+This directive has no visible effect.
+
+
qapi:module
-----------
diff --git a/docs/sphinx/qapi_domain.py b/docs/sphinx/qapi_domain.py
index 6485c43206..a204af9b06 100644
--- a/docs/sphinx/qapi_domain.py
+++ b/docs/sphinx/qapi_domain.py
@@ -38,6 +38,7 @@
from sphinx.locale import _, __
from sphinx.roles import XRefRole
from sphinx.util import logging
+from sphinx.util.docutils import SphinxDirective
from sphinx.util.nodes import make_id, make_refnode
@@ -645,6 +646,17 @@ def run(self) -> List[Node]:
return ret
+class QAPINamespace(SphinxDirective):
+ has_content = False
+ required_arguments = 1
+
+ def run(self) -> List[Node]:
+ namespace = self.arguments[0].strip()
+ self.env.ref_context["qapi:namespace"] = namespace
+
+ return []
+
+
class QAPIIndex(Index):
"""
Index subclass to provide the QAPI definition index.
@@ -726,6 +738,7 @@ class QAPIDomain(Domain):
# Each of these provides a rST directive,
# e.g. .. qapi:module:: block-core
directives = {
+ "namespace": QAPINamespace,
"module": QAPIModule,
"command": QAPICommand,
"event": QAPIEvent,
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL 07/12] docs/qapidoc: add :namespace: option to qapi-doc directive
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
` (5 preceding siblings ...)
2025-03-14 10:10 ` [PULL 06/12] docs/qapi-domain: add qapi:namespace directive Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-14 10:10 ` [PULL 08/12] docs/qapi_domain: add namespace support to cross-references Markus Armbruster
` (5 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, John Snow
From: John Snow <jsnow@redhat.com>
Add a :namespace: option to the qapi-doc directive, which inserts a
qapi:namespace directive into the start of the generated document. This,
in turn, associates all auto-generated definitions by this directive
with the specified namespace.
The source info for these generated lines are credited to the start of
the qapi-doc directive, which isn't precisely correct, but I wasn't sure
how to get it more accurate without some re-parsing shenanigans.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-7-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
docs/sphinx/qapidoc.py | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/docs/sphinx/qapidoc.py b/docs/sphinx/qapidoc.py
index 432fef04b0..661b2c4ed0 100644
--- a/docs/sphinx/qapidoc.py
+++ b/docs/sphinx/qapidoc.py
@@ -451,6 +451,12 @@ def visit_entity(self, ent: QAPISchemaDefinition) -> None:
finally:
self._curr_ent = None
+ def set_namespace(self, namespace: str, source: str, lineno: int) -> None:
+ self.add_line_raw(
+ f".. qapi:namespace:: {namespace}", source, lineno + 1
+ )
+ self.ensure_blank_line()
+
class QAPISchemaGenDepVisitor(QAPISchemaVisitor):
"""A QAPI schema visitor which adds Sphinx dependencies each module
@@ -496,6 +502,7 @@ class QAPIDocDirective(NestedDirective):
optional_arguments = 1
option_spec = {
"qapifile": directives.unchanged_required,
+ "namespace": directives.unchanged,
"transmogrify": directives.flag,
}
has_content = False
@@ -510,6 +517,11 @@ def transmogrify(self, schema: QAPISchema) -> nodes.Element:
vis = Transmogrifier()
modules = set()
+ if "namespace" in self.options:
+ vis.set_namespace(
+ self.options["namespace"], *self.get_source_info()
+ )
+
for doc in schema.docs:
module_source = doc.info.fname
if module_source not in modules:
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL 08/12] docs/qapi_domain: add namespace support to cross-references
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
` (6 preceding siblings ...)
2025-03-14 10:10 ` [PULL 07/12] docs/qapidoc: add :namespace: option to qapi-doc directive Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-14 10:10 ` [PULL 09/12] docs/qapi-domain: add namespaced index support Markus Armbruster
` (4 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, John Snow
From: John Snow <jsnow@redhat.com>
This patch does three things:
1. Record the current namespace context in pending_xrefs so it can be
used for link resolution later,
2. Pass that recorded namespace context to find_obj() when resolving a
reference, and
3. Wildly and completely rewrite find_obj().
cross-reference support is expanded to tolerate the presence or absence
of either namespace or module, and to cope with the presence or absence
of contextual information for either.
References now work like this:
1. If the explicit reference target is recorded in the domain's object
registry, we link to that target and stop looking. We do this lookup
regardless of how fully qualified the target is, which allows direct
references to modules (which don't have a module component to their
names) or direct references to definitions that may or may not belong
to a namespace or module.
2. If contextual information is available from qapi:namespace or
qapi:module directives, try using those components to find a direct
match to the implied target name.
3. If both prior lookups fail, generate a series of regular expressions
looking for wildcard matches in order from most to least
specific. Any explicitly provided components (namespace, module)
*must* match exactly, but both contextual and entirely omitted
components are allowed to differ from the search result. Note that if
more than one result is found, Sphinx will emit a warning (a build
error for QEMU) and list all of the candidate references.
The practical upshot is that in the large majority of cases, namespace
and module information is not required when creating simple `references`
to definitions from within the same context -- even when identical
definitions exist in other contexts.
Even when using simple `references` from elsewhere in the QEMU
documentation manual, explicit namespace info is not required if there
is only one definition by that name.
Disambiguation *will* be required from outside of the QAPI documentation
when referencing e.g. block-core definitions, which are shared between
QEMU QMP and the QEMU Storage Daemon. In that case, there are two
options:
A: References can be made partially or fully explicit,
e.g. `QMP:block-dirty-bitmap-add` will link to the QEMU version of
the definition, while `QSD:block-dirty-bitmap-add` would link to the
QSD version.
B: If all of the references in a document are intended to go to the same
place, you can insert a "qapi:namespace:: QMP" directive to influence
the fuzzy-searching for later references.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-8-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
docs/devel/qapi-domain.rst | 34 ++++++++--
docs/sphinx/qapi_domain.py | 127 ++++++++++++++++++++++++-------------
2 files changed, 114 insertions(+), 47 deletions(-)
diff --git a/docs/devel/qapi-domain.rst b/docs/devel/qapi-domain.rst
index 73e13ab45c..4705ba255e 100644
--- a/docs/devel/qapi-domain.rst
+++ b/docs/devel/qapi-domain.rst
@@ -400,11 +400,10 @@ Namespaces
Mimicking the `Python domain target specification syntax
<https://www.sphinx-doc.org/en/master/usage/domains/python.html#target-specification>`_,
QAPI allows you to specify the fully qualified path for a data
-type. QAPI enforces globally unique names, so it's unlikely you'll need
-this specific feature, but it may be extended in the near future to
-allow referencing identically named commands and data types from
-different utilities; i.e. QEMU Storage Daemon vs QMP.
+type.
+* A namespace can be explicitly provided;
+ e.g. ``:qapi:type:`QMP:BitmapSyncMode``
* A module can be explicitly provided;
``:qapi:type:`block-core.BitmapSyncMode``` will render to:
:qapi:type:`block-core.BitmapSyncMode`
@@ -413,6 +412,28 @@ different utilities; i.e. QEMU Storage Daemon vs QMP.
will render to: :qapi:type:`~block-core.BitmapSyncMode`
+Target resolution
+-----------------
+
+Any cross-reference to a QAPI type, whether using the ```any``` style of
+reference or the more explicit ```:qapi:any:`target``` syntax, allows
+for the presence or absence of either the namespace or module
+information.
+
+When absent, their value will be inferred from context by the presence
+of any ``qapi:namespace`` or ``qapi:module`` directives preceding the
+cross-reference.
+
+If no results are found when using the inferred values, other
+namespaces/modules will be searched as a last resort; but any explicitly
+provided values must always match in order to succeed.
+
+This allows for efficient cross-referencing with a minimum of syntax in
+the large majority of cases, but additional context or namespace markup
+may be required outside of the QAPI reference documents when linking to
+items that share a name across multiple documented QAPI schema.
+
+
Custom link text
----------------
@@ -492,6 +513,11 @@ directives are associated with the most recent namespace. This affects
the definition's "fully qualified name", allowing two different
namespaces to create an otherwise identically named definition.
+This directive also influences how reference resolution works for any
+references that do not explicity specify a namespace, so this directive
+can be used to nudge references into preferring targets from within that
+namespace.
+
Example::
.. qapi:namespace:: QMP
diff --git a/docs/sphinx/qapi_domain.py b/docs/sphinx/qapi_domain.py
index a204af9b06..a8a85a2de3 100644
--- a/docs/sphinx/qapi_domain.py
+++ b/docs/sphinx/qapi_domain.py
@@ -7,6 +7,7 @@
from __future__ import annotations
+import re
from typing import (
TYPE_CHECKING,
List,
@@ -94,6 +95,7 @@ def process_link(
title: str,
target: str,
) -> tuple[str, str]:
+ refnode["qapi:namespace"] = env.ref_context.get("qapi:namespace")
refnode["qapi:module"] = env.ref_context.get("qapi:module")
# Cross-references that begin with a tilde adjust the title to
@@ -830,40 +832,44 @@ def merge_domaindata(
self.objects[fullname] = obj
def find_obj(
- self, modname: str, name: str, typ: Optional[str]
- ) -> list[tuple[str, ObjectEntry]]:
+ self, namespace: str, modname: str, name: str, typ: Optional[str]
+ ) -> List[Tuple[str, ObjectEntry]]:
"""
- Find a QAPI object for "name", perhaps using the given module.
+ Find a QAPI object for "name", maybe using contextual information.
Returns a list of (name, object entry) tuples.
- :param modname: The current module context (if any!)
- under which we are searching.
- :param name: The name of the x-ref to resolve;
- may or may not include a leading module.
- :param type: The role name of the x-ref we're resolving, if provided.
- (This is absent for "any" lookups.)
+ :param namespace: The current namespace context (if any!) under
+ which we are searching.
+ :param modname: The current module context (if any!) under
+ which we are searching.
+ :param name: The name of the x-ref to resolve; may or may not
+ include leading context.
+ :param type: The role name of the x-ref we're resolving, if
+ provided. This is absent for "any" role lookups.
"""
if not name:
return []
- names: list[str] = []
- matches: list[tuple[str, ObjectEntry]] = []
+ # ##
+ # what to search for
+ # ##
- fullname = name
- if "." in fullname:
- # We're searching for a fully qualified reference;
- # ignore the contextual module.
- pass
- elif modname:
- # We're searching for something from somewhere;
- # try searching the current module first.
- # e.g. :qapi:cmd:`query-block` or `query-block` is being searched.
- fullname = f"{modname}.{name}"
+ parts = list(QAPIDescription.split_fqn(name))
+ explicit = tuple(bool(x) for x in parts)
+
+ # Fill in the blanks where possible:
+ if namespace and not parts[0]:
+ parts[0] = namespace
+ if modname and not parts[1]:
+ parts[1] = modname
+
+ implicit_fqn = ""
+ if all(parts):
+ implicit_fqn = f"{parts[0]}:{parts[1]}.{parts[2]}"
if typ is None:
- # type isn't specified, this is a generic xref.
- # search *all* qapi-specific object types.
+ # :any: lookup, search everything:
objtypes: List[str] = list(self.object_types)
else:
# type is specified and will be a role (e.g. obj, mod, cmd)
@@ -871,25 +877,57 @@ def find_obj(
# using the QAPIDomain.object_types table.
objtypes = self.objtypes_for_role(typ, [])
- if name in self.objects and self.objects[name].objtype in objtypes:
- names = [name]
- elif (
- fullname in self.objects
- and self.objects[fullname].objtype in objtypes
- ):
- names = [fullname]
- else:
- # exact match wasn't found; e.g. we are searching for
- # `query-block` from a different (or no) module.
- searchname = "." + name
- names = [
- oname
- for oname in self.objects
- if oname.endswith(searchname)
- and self.objects[oname].objtype in objtypes
- ]
+ # ##
+ # search!
+ # ##
- matches = [(oname, self.objects[oname]) for oname in names]
+ def _search(needle: str) -> List[str]:
+ if (
+ needle
+ and needle in self.objects
+ and self.objects[needle].objtype in objtypes
+ ):
+ return [needle]
+ return []
+
+ if found := _search(name):
+ # Exact match!
+ pass
+ elif found := _search(implicit_fqn):
+ # Exact match using contextual information to fill in the gaps.
+ pass
+ else:
+ # No exact hits, perform applicable fuzzy searches.
+ searches = []
+
+ esc = tuple(re.escape(s) for s in parts)
+
+ # Try searching for ns:*.name or ns:name
+ if explicit[0] and not explicit[1]:
+ searches.append(f"^{esc[0]}:([^\\.]+\\.)?{esc[2]}$")
+ # Try searching for *:module.name or module.name
+ if explicit[1] and not explicit[0]:
+ searches.append(f"(^|:){esc[1]}\\.{esc[2]}$")
+ # Try searching for context-ns:*.name or context-ns:name
+ if parts[0] and not (explicit[0] or explicit[1]):
+ searches.append(f"^{esc[0]}:([^\\.]+\\.)?{esc[2]}$")
+ # Try searching for *:context-mod.name or context-mod.name
+ if parts[1] and not (explicit[0] or explicit[1]):
+ searches.append(f"(^|:){esc[1]}\\.{esc[2]}$")
+ # Try searching for *:name, *.name, or name
+ if not (explicit[0] or explicit[1]):
+ searches.append(f"(^|:|\\.){esc[2]}$")
+
+ for search in searches:
+ if found := [
+ oname
+ for oname in self.objects
+ if re.search(search, oname)
+ and self.objects[oname].objtype in objtypes
+ ]:
+ break
+
+ matches = [(oname, self.objects[oname]) for oname in found]
if len(matches) > 1:
matches = [m for m in matches if not m[1].aliased]
return matches
@@ -904,8 +942,9 @@ def resolve_xref(
node: pending_xref,
contnode: Element,
) -> nodes.reference | None:
+ namespace = node.get("qapi:namespace")
modname = node.get("qapi:module")
- matches = self.find_obj(modname, target, typ)
+ matches = self.find_obj(namespace, modname, target, typ)
if not matches:
# Normally, we could pass warn_dangling=True to QAPIXRefRole(),
@@ -958,7 +997,9 @@ def resolve_any_xref(
contnode: Element,
) -> List[Tuple[str, nodes.reference]]:
results: List[Tuple[str, nodes.reference]] = []
- matches = self.find_obj(node.get("qapi:module"), target, None)
+ matches = self.find_obj(
+ node.get("qapi:namespace"), node.get("qapi:module"), target, None
+ )
for name, obj in matches:
rolename = self.role_for_objtype(obj.objtype)
assert rolename is not None
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL 09/12] docs/qapi-domain: add namespaced index support
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
` (7 preceding siblings ...)
2025-03-14 10:10 ` [PULL 08/12] docs/qapi_domain: add namespace support to cross-references Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-14 10:10 ` [PULL 10/12] docs: add QAPI namespace "QMP" to qemu-qmp-ref Markus Armbruster
` (3 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, John Snow
From: John Snow <jsnow@redhat.com>
Generate an index-per-namespace for the QAPI domain. Due to a limitation
with Sphinx's architecture, these indices must be defined during setup
time and cannot be dynamically created on-demand when a namespace
directive is encountered.
Owing to that limitation, add a configuration value to conf.py that
specifies which QAPI namespaces we'll generate indices for.
Indices will be named after their namespace, e.g. the "QMP" namespace
will generate to "qapi-qmp-index.html" and can be referenced using
`qapi-qmp-index`.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-9-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
docs/conf.py | 3 +++
docs/sphinx/qapi_domain.py | 51 +++++++++++++++++++++++++++-----------
2 files changed, 40 insertions(+), 14 deletions(-)
diff --git a/docs/conf.py b/docs/conf.py
index a3f9fa63d9..175491148c 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -161,6 +161,9 @@
"see also",
}
+# Due to a limitation in Sphinx, we need to know which indices to
+# generate in advance. Adding a namespace here allows that generation.
+qapi_namespaces = set()
# -- Options for HTML output ----------------------------------------------
diff --git a/docs/sphinx/qapi_domain.py b/docs/sphinx/qapi_domain.py
index a8a85a2de3..c94af5719c 100644
--- a/docs/sphinx/qapi_domain.py
+++ b/docs/sphinx/qapi_domain.py
@@ -8,11 +8,13 @@
from __future__ import annotations
import re
+import types
from typing import (
TYPE_CHECKING,
List,
NamedTuple,
Tuple,
+ Type,
cast,
)
@@ -669,6 +671,7 @@ class QAPIIndex(Index):
name = "index"
localname = _("QAPI Index")
shortname = _("QAPI Index")
+ namespace = ""
def generate(
self,
@@ -678,25 +681,20 @@ def generate(
content: Dict[str, List[IndexEntry]] = {}
collapse = False
- # list of all object (name, ObjectEntry) pairs, sorted by name
- # (ignoring the module)
- objects = sorted(
- self.domain.objects.items(),
- key=lambda x: x[0].split(".")[-1].lower(),
- )
-
- for objname, obj in objects:
+ for objname, obj in self.domain.objects.items():
if docnames and obj.docname not in docnames:
continue
- # Strip the module name out:
- objname = objname.split(".")[-1]
+ ns, _mod, name = QAPIDescription.split_fqn(objname)
+
+ if self.namespace != ns:
+ continue
# Add an alphabetical entry:
- entries = content.setdefault(objname[0].upper(), [])
+ entries = content.setdefault(name[0].upper(), [])
entries.append(
IndexEntry(
- objname, 0, obj.docname, obj.node_id, obj.objtype, "", ""
+ name, 0, obj.docname, obj.node_id, obj.objtype, "", ""
)
)
@@ -704,10 +702,14 @@ def generate(
category = obj.objtype.title() + "s"
entries = content.setdefault(category, [])
entries.append(
- IndexEntry(objname, 0, obj.docname, obj.node_id, "", "", "")
+ IndexEntry(name, 0, obj.docname, obj.node_id, "", "", "")
)
- # alphabetically sort categories; type names first, ABC entries last.
+ # Sort entries within each category alphabetically
+ for category in content:
+ content[category] = sorted(content[category])
+
+ # Sort the categories themselves; type names first, ABC entries last.
sorted_content = sorted(
content.items(),
key=lambda x: (len(x[0]) == 1, x[0]),
@@ -780,6 +782,21 @@ def objects(self) -> Dict[str, ObjectEntry]:
ret = self.data.setdefault("objects", {})
return ret # type: ignore[no-any-return]
+ def setup(self) -> None:
+ namespaces = set(self.env.app.config.qapi_namespaces)
+ for namespace in namespaces:
+ new_index: Type[QAPIIndex] = types.new_class(
+ f"{namespace}Index", bases=(QAPIIndex,)
+ )
+ new_index.name = f"{namespace.lower()}-index"
+ new_index.localname = _(f"{namespace} Index")
+ new_index.shortname = _(f"{namespace} Index")
+ new_index.namespace = namespace
+
+ self.indices.append(new_index)
+
+ super().setup()
+
def note_object(
self,
name: str,
@@ -1019,6 +1036,12 @@ def setup(app: Sphinx) -> Dict[str, Any]:
"env", # Setting impacts parsing phase
types=set,
)
+ app.add_config_value(
+ "qapi_namespaces",
+ set(),
+ "env",
+ types=set,
+ )
app.add_domain(QAPIDomain)
return {
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL 10/12] docs: add QAPI namespace "QMP" to qemu-qmp-ref
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
` (8 preceding siblings ...)
2025-03-14 10:10 ` [PULL 09/12] docs/qapi-domain: add namespaced index support Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-14 10:10 ` [PULL 11/12] docs: disambiguate references in qapi-domain.rst Markus Armbruster
` (2 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, John Snow
From: John Snow <jsnow@redhat.com>
This also creates the qapi-qmp-index.html index and cross-reference
target.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-10-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
docs/conf.py | 4 +++-
docs/interop/qemu-qmp-ref.rst | 1 +
qapi/qapi-schema.json | 2 +-
3 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/docs/conf.py b/docs/conf.py
index 175491148c..9a86e84a80 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -163,7 +163,9 @@
# Due to a limitation in Sphinx, we need to know which indices to
# generate in advance. Adding a namespace here allows that generation.
-qapi_namespaces = set()
+qapi_namespaces = {
+ "QMP",
+}
# -- Options for HTML output ----------------------------------------------
diff --git a/docs/interop/qemu-qmp-ref.rst b/docs/interop/qemu-qmp-ref.rst
index e95eeac45e..ef8792b53f 100644
--- a/docs/interop/qemu-qmp-ref.rst
+++ b/docs/interop/qemu-qmp-ref.rst
@@ -8,3 +8,4 @@ QEMU QMP Reference Manual
.. qapi-doc:: qapi/qapi-schema.json
:transmogrify:
+ :namespace: QMP
diff --git a/qapi/qapi-schema.json b/qapi/qapi-schema.json
index 4475e81cc3..c41c01eb2a 100644
--- a/qapi/qapi-schema.json
+++ b/qapi/qapi-schema.json
@@ -5,7 +5,7 @@
#
# This document describes all commands currently supported by QMP.
#
-# For locating a particular item, please see the `qapi-index`.
+# For locating a particular item, please see the `qapi-qmp-index`.
#
# Most of the time their usage is exactly the same as in the user
# Monitor, this means that any other document which also describe
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL 11/12] docs: disambiguate references in qapi-domain.rst
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
` (9 preceding siblings ...)
2025-03-14 10:10 ` [PULL 10/12] docs: add QAPI namespace "QMP" to qemu-qmp-ref Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-14 10:10 ` [PULL 12/12] docs: enable transmogrifier for QSD and QGA Markus Armbruster
2025-03-16 10:09 ` [PULL 00/12] QAPI patches patches for 2025-03-14 Stefan Hajnoczi
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, John Snow
From: John Snow <jsnow@redhat.com>
Before we enable the QGA and QSD namespaces, we need to disambiguate
some of the references that would become ambiguous as a result!
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-11-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
docs/devel/qapi-domain.rst | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/docs/devel/qapi-domain.rst b/docs/devel/qapi-domain.rst
index 4705ba255e..a748529f51 100644
--- a/docs/devel/qapi-domain.rst
+++ b/docs/devel/qapi-domain.rst
@@ -385,13 +385,13 @@ Type names in references can be surrounded by brackets, like
``[typename]``, to indicate an array of that type. The cross-reference
will apply only to the type name between the brackets. For example;
``:qapi:type:`[Qcow2BitmapInfoFlags]``` renders to:
-:qapi:type:`[Qcow2BitmapInfoFlags]`
+:qapi:type:`[QMP:Qcow2BitmapInfoFlags]`
To indicate an optional argument/member in a field list, the type name
can be suffixed with ``?``. The cross-reference will be transformed to
"type, Optional" with the link applying only to the type name. For
example; ``:qapi:type:`BitmapSyncMode?``` renders to:
-:qapi:type:`BitmapSyncMode?`
+:qapi:type:`QMP:BitmapSyncMode?`
Namespaces
@@ -405,11 +405,11 @@ type.
* A namespace can be explicitly provided;
e.g. ``:qapi:type:`QMP:BitmapSyncMode``
* A module can be explicitly provided;
- ``:qapi:type:`block-core.BitmapSyncMode``` will render to:
- :qapi:type:`block-core.BitmapSyncMode`
+ ``:qapi:type:`QMP:block-core.BitmapSyncMode``` will render to:
+ :qapi:type:`QMP:block-core.BitmapSyncMode`
* If you don't want to display the "fully qualified" name, it can be
- prefixed with a tilde; ``:qapi:type:`~block-core.BitmapSyncMode```
- will render to: :qapi:type:`~block-core.BitmapSyncMode`
+ prefixed with a tilde; ``:qapi:type:`~QMP:block-core.BitmapSyncMode```
+ will render to: :qapi:type:`~QMP:block-core.BitmapSyncMode`
Target resolution
@@ -444,7 +444,7 @@ using the ``custom text <target>`` syntax.
For example, ``:qapi:cmd:`Merge dirty bitmaps
<block-dirty-bitmap-merge>``` will render as: :qapi:cmd:`Merge dirty
-bitmaps <block-dirty-bitmap-merge>`
+bitmaps <QMP:block-dirty-bitmap-merge>`
Directives
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PULL 12/12] docs: enable transmogrifier for QSD and QGA
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
` (10 preceding siblings ...)
2025-03-14 10:10 ` [PULL 11/12] docs: disambiguate references in qapi-domain.rst Markus Armbruster
@ 2025-03-14 10:10 ` Markus Armbruster
2025-03-16 10:09 ` [PULL 00/12] QAPI patches patches for 2025-03-14 Stefan Hajnoczi
12 siblings, 0 replies; 14+ messages in thread
From: Markus Armbruster @ 2025-03-14 10:10 UTC (permalink / raw)
To: qemu-devel; +Cc: stefanha, John Snow
From: John Snow <jsnow@redhat.com>
This also creates the `qapi-qsd-index` and `qapi-qga-index` QMP indices.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-12-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
docs/conf.py | 2 ++
docs/interop/qemu-ga-ref.rst | 2 ++
docs/interop/qemu-storage-daemon-qmp-ref.rst | 2 ++
qga/qapi-schema.json | 3 +++
storage-daemon/qapi/qapi-schema.json | 8 ++++++++
5 files changed, 17 insertions(+)
diff --git a/docs/conf.py b/docs/conf.py
index 9a86e84a80..7b5712e122 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -164,7 +164,9 @@
# Due to a limitation in Sphinx, we need to know which indices to
# generate in advance. Adding a namespace here allows that generation.
qapi_namespaces = {
+ "QGA",
"QMP",
+ "QSD",
}
# -- Options for HTML output ----------------------------------------------
diff --git a/docs/interop/qemu-ga-ref.rst b/docs/interop/qemu-ga-ref.rst
index 032d492455..19b5c7a549 100644
--- a/docs/interop/qemu-ga-ref.rst
+++ b/docs/interop/qemu-ga-ref.rst
@@ -5,3 +5,5 @@ QEMU Guest Agent Protocol Reference
:depth: 3
.. qapi-doc:: qga/qapi-schema.json
+ :transmogrify:
+ :namespace: QGA
diff --git a/docs/interop/qemu-storage-daemon-qmp-ref.rst b/docs/interop/qemu-storage-daemon-qmp-ref.rst
index 9fed68152f..d0228d63b8 100644
--- a/docs/interop/qemu-storage-daemon-qmp-ref.rst
+++ b/docs/interop/qemu-storage-daemon-qmp-ref.rst
@@ -5,3 +5,5 @@ QEMU Storage Daemon QMP Reference Manual
:depth: 3
.. qapi-doc:: storage-daemon/qapi/qapi-schema.json
+ :transmogrify:
+ :namespace: QSD
diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
index 995594aaf4..35ec0e7db3 100644
--- a/qga/qapi-schema.json
+++ b/qga/qapi-schema.json
@@ -3,6 +3,9 @@
##
# = QEMU guest agent protocol commands and structs
+#
+# For a concise listing of all commands, events, and types in the QEMU
+# guest agent, please consult the `qapi-qga-index`.
##
{ 'pragma': { 'doc-required': true } }
diff --git a/storage-daemon/qapi/qapi-schema.json b/storage-daemon/qapi/qapi-schema.json
index f10c949490..2a562ee32e 100644
--- a/storage-daemon/qapi/qapi-schema.json
+++ b/storage-daemon/qapi/qapi-schema.json
@@ -13,6 +13,14 @@
# the array type in the main schema, even if it is unused outside of the
# storage daemon.
+##
+# = QEMU storage daemon protocol commands and structs
+#
+# For a concise listing of all commands, events, and types in the QEMU
+# storage daemon, please consult the `qapi-qsd-index`.
+##
+
+
{ 'include': '../../qapi/pragma.json' }
# Documentation generated with qapi-gen.py is in source order, with
--
2.48.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PULL 00/12] QAPI patches patches for 2025-03-14
2025-03-14 10:10 [PULL 00/12] QAPI patches patches for 2025-03-14 Markus Armbruster
` (11 preceding siblings ...)
2025-03-14 10:10 ` [PULL 12/12] docs: enable transmogrifier for QSD and QGA Markus Armbruster
@ 2025-03-16 10:09 ` Stefan Hajnoczi
12 siblings, 0 replies; 14+ messages in thread
From: Stefan Hajnoczi @ 2025-03-16 10:09 UTC (permalink / raw)
To: Markus Armbruster; +Cc: qemu-devel, stefanha
[-- Attachment #1: Type: text/plain, Size: 116 bytes --]
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/10.0 for any user-visible changes.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread