qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: Corey Minyard <minyard@acm.org>
Cc: Nicholas Piggin <npiggin@gmail.com>, qemu-devel@nongnu.org
Subject: [PATCH v3 4/5] ipmi/bmc-sim: implement watchdog dont log flag
Date: Wed,  2 Apr 2025 00:01:51 +1000	[thread overview]
Message-ID: <20250401140153.685523-5-npiggin@gmail.com> (raw)
In-Reply-To: <20250401140153.685523-1-npiggin@gmail.com>

If the dont-log flag is set in the 'timer use' field for the
'set watchdog' command, a watchdog timeout will not get logged as
a timer use expiration.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 hw/ipmi/ipmi_bmc_sim.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/hw/ipmi/ipmi_bmc_sim.c b/hw/ipmi/ipmi_bmc_sim.c
index d63f2348ba1..98cfab6a455 100644
--- a/hw/ipmi/ipmi_bmc_sim.c
+++ b/hw/ipmi/ipmi_bmc_sim.c
@@ -514,7 +514,8 @@ static void gen_event(IPMIBmcSim *ibs, unsigned int sens_num, uint8_t deassert,
 
 static void sensor_set_discrete_bit(IPMIBmcSim *ibs, unsigned int sensor,
                                     unsigned int bit, unsigned int val,
-                                    uint8_t evd1, uint8_t evd2, uint8_t evd3)
+                                    uint8_t evd1, uint8_t evd2, uint8_t evd3,
+                                    bool do_log)
 {
     IPMISensor *sens;
     uint16_t mask;
@@ -534,7 +535,7 @@ static void sensor_set_discrete_bit(IPMIBmcSim *ibs, unsigned int sensor,
             return; /* Already asserted */
         }
         sens->assert_states |= mask & sens->assert_suppt;
-        if (sens->assert_enable & mask & sens->assert_states) {
+        if (do_log && (sens->assert_enable & mask & sens->assert_states)) {
             /* Send an event on assert */
             gen_event(ibs, sensor, 0, evd1, evd2, evd3);
         }
@@ -544,7 +545,7 @@ static void sensor_set_discrete_bit(IPMIBmcSim *ibs, unsigned int sensor,
             return; /* Already deasserted */
         }
         sens->deassert_states |= mask & sens->deassert_suppt;
-        if (sens->deassert_enable & mask & sens->deassert_states) {
+        if (do_log && (sens->deassert_enable & mask & sens->deassert_states)) {
             /* Send an event on deassert */
             gen_event(ibs, sensor, 1, evd1, evd2, evd3);
         }
@@ -700,6 +701,7 @@ static void ipmi_sim_handle_timeout(IPMIBmcSim *ibs)
 {
     IPMIInterface *s = ibs->parent.intf;
     IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+    bool do_log = !IPMI_BMC_WATCHDOG_GET_DONT_LOG(ibs);
 
     if (!ibs->watchdog_running) {
         goto out;
@@ -711,14 +713,16 @@ static void ipmi_sim_handle_timeout(IPMIBmcSim *ibs)
             ibs->msg_flags |= IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK;
             k->do_hw_op(s, IPMI_SEND_NMI, 0);
             sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 8, 1,
-                                    0xc8, (2 << 4) | 0xf, 0xff);
+                                    0xc8, (2 << 4) | 0xf, 0xff,
+                                    do_log);
             break;
 
         case IPMI_BMC_WATCHDOG_PRE_MSG_INT:
             ibs->msg_flags |= IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK;
             k->set_atn(s, 1, attn_irq_enabled(ibs));
             sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 8, 1,
-                                    0xc8, (3 << 4) | 0xf, 0xff);
+                                    0xc8, (3 << 4) | 0xf, 0xff,
+                                    do_log);
             break;
 
         default:
@@ -738,24 +742,28 @@ static void ipmi_sim_handle_timeout(IPMIBmcSim *ibs)
     switch (IPMI_BMC_WATCHDOG_GET_ACTION(ibs)) {
     case IPMI_BMC_WATCHDOG_ACTION_NONE:
         sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 0, 1,
-                                0xc0, ibs->watchdog_use & 0xf, 0xff);
+                                0xc0, ibs->watchdog_use & 0xf, 0xff,
+                                do_log);
         break;
 
     case IPMI_BMC_WATCHDOG_ACTION_RESET:
         sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 1, 1,
-                                0xc1, ibs->watchdog_use & 0xf, 0xff);
+                                0xc1, ibs->watchdog_use & 0xf, 0xff,
+                                do_log);
         k->do_hw_op(s, IPMI_RESET_CHASSIS, 0);
         break;
 
     case IPMI_BMC_WATCHDOG_ACTION_POWER_DOWN:
         sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 2, 1,
-                                0xc2, ibs->watchdog_use & 0xf, 0xff);
+                                0xc2, ibs->watchdog_use & 0xf, 0xff,
+                                do_log);
         k->do_hw_op(s, IPMI_POWEROFF_CHASSIS, 0);
         break;
 
     case IPMI_BMC_WATCHDOG_ACTION_POWER_CYCLE:
         sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 2, 1,
-                                0xc3, ibs->watchdog_use & 0xf, 0xff);
+                                0xc3, ibs->watchdog_use & 0xf, 0xff,
+                                do_log);
         k->do_hw_op(s, IPMI_POWERCYCLE_CHASSIS, 0);
         break;
     }
-- 
2.47.1



  parent reply	other threads:[~2025-04-01 14:03 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-01 14:01 [PATCH v3 0/5] ipmi: bmc-sim improvements Nicholas Piggin
2025-04-01 14:01 ` [PATCH v3 1/5] ipmi/pci-ipmi-bt: Rename copy-paste variables Nicholas Piggin
2025-04-01 14:01 ` [PATCH v3 2/5] ipmi: add fwinfo to pci ipmi devices Nicholas Piggin
2025-04-01 14:58   ` Philippe Mathieu-Daudé
2025-04-01 14:01 ` [PATCH v3 3/5] ipmi/bmc-sim: Add 'Get Channel Info' command Nicholas Piggin
2025-04-01 14:01 ` Nicholas Piggin [this message]
2025-04-01 14:01 ` [PATCH v3 5/5] ipmi/bmc-sim: add error handling for 'Set BMC Global Enables' command Nicholas Piggin
2025-04-01 19:17 ` [PATCH v3 0/5] ipmi: bmc-sim improvements Corey Minyard
2025-04-11  6:25   ` Nicholas Piggin
2025-04-11 18:20     ` Corey Minyard
2025-04-12  5:19       ` Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250401140153.685523-5-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=minyard@acm.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).