From: Tomita Moeko <tomitamoeko@gmail.com>
To: "Alex Williamson" <alex.williamson@redhat.com>,
"Cédric Le Goater" <clg@redhat.com>,
"Tomita Moeko" <tomitamoeko@gmail.com>
Cc: qemu-devel@nongnu.org, "Corvin Köhne" <c.koehne@beckhoff.com>
Subject: [PATCH 08/11] vfio/igd: Allow overriding GMS with 0xf0 to 0xfe on Gen9+
Date: Tue, 22 Apr 2025 00:31:08 +0800 [thread overview]
Message-ID: <20250421163112.21316-9-tomitamoeko@gmail.com> (raw)
In-Reply-To: <20250421163112.21316-1-tomitamoeko@gmail.com>
On Gen9 and later IGD devices, GMS 0xf0 to 0xfe represents 4MB to 60MB
pre-allocated memory size in 4MB increments. Allow users overriding
GMS with these values.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
---
hw/vfio/igd.c | 59 +++++++++++++++++++++++++++++++++++----------------
1 file changed, 41 insertions(+), 18 deletions(-)
diff --git a/hw/vfio/igd.c b/hw/vfio/igd.c
index e3ff86d0e6..b747fdfaeb 100644
--- a/hw/vfio/igd.c
+++ b/hw/vfio/igd.c
@@ -387,6 +387,44 @@ static bool vfio_pci_igd_setup_lpc_bridge(VFIOPCIDevice *vdev, Error **errp)
return true;
}
+static bool vfio_pci_igd_override_gms(int gen, uint32_t gms, uint32_t *gmch)
+{
+ bool ret = false;
+
+ if (gen == -1) {
+ error_report("x-igd-gms is not supported on this device");
+ } else if (gen < 8) {
+ if (gms <= 0x10) {
+ *gmch &= ~(IGD_GMCH_GEN6_GMS_MASK << IGD_GMCH_GEN6_GMS_SHIFT);
+ *gmch |= gms << IGD_GMCH_GEN6_GMS_SHIFT;
+ ret = true;
+ } else {
+ error_report(QERR_INVALID_PARAMETER_VALUE, "x-igd-gms", "0~0x10");
+ }
+ } else if (gen == 8) {
+ if ((gms <= 0x40)) {
+ *gmch &= ~(IGD_GMCH_GEN8_GMS_MASK << IGD_GMCH_GEN8_GMS_SHIFT);
+ *gmch |= gms << IGD_GMCH_GEN8_GMS_SHIFT;
+ ret = true;
+ } else {
+ error_report(QERR_INVALID_PARAMETER_VALUE, "x-igd-gms", "0~0x40");
+ }
+ } else {
+ /* 0x0 to 0x40: 32MB increments starting at 0MB */
+ /* 0xf0 to 0xfe: 4MB increments starting at 4MB */
+ if ((gms <= 0x40) || (gms >= 0xf0 && gms <= 0xfe)) {
+ *gmch &= ~(IGD_GMCH_GEN8_GMS_MASK << IGD_GMCH_GEN8_GMS_SHIFT);
+ *gmch |= gms << IGD_GMCH_GEN8_GMS_SHIFT;
+ ret = true;
+ } else {
+ error_report(QERR_INVALID_PARAMETER_VALUE,
+ "x-igd-gms", "0~0x40 or 0xf0~0xfe");
+ }
+ }
+
+ return ret;
+}
+
#define IGD_GGC_MMIO_OFFSET 0x108040
#define IGD_BDSM_MMIO_OFFSET 0x1080C0
@@ -573,24 +611,9 @@ static bool vfio_pci_igd_config_quirk(VFIOPCIDevice *vdev, Error **errp)
* 32MiB. This option should only be used when the desired size cannot be
* set from DVMT Pre-Allocated option in host BIOS.
*/
- if (vdev->igd_gms) {
- if (gen < 8) {
- if (vdev->igd_gms <= 0x10) {
- gmch &= ~(IGD_GMCH_GEN6_GMS_MASK << IGD_GMCH_GEN6_GMS_SHIFT);
- gmch |= vdev->igd_gms << IGD_GMCH_GEN6_GMS_SHIFT;
- } else {
- error_report(QERR_INVALID_PARAMETER_VALUE,
- "x-igd-gms", "0~0x10");
- }
- } else {
- if (vdev->igd_gms <= 0x40) {
- gmch &= ~(IGD_GMCH_GEN8_GMS_MASK << IGD_GMCH_GEN8_GMS_SHIFT);
- gmch |= vdev->igd_gms << IGD_GMCH_GEN8_GMS_SHIFT;
- } else {
- error_report(QERR_INVALID_PARAMETER_VALUE,
- "x-igd-gms", "0~0x40");
- }
- }
+ if (vdev->igd_gms &&
+ !vfio_pci_igd_override_gms(gen, vdev->igd_gms, &gmch)) {
+ return false;
}
gms_size = igd_stolen_memory_size(gen, gmch);
--
2.47.2
next prev parent reply other threads:[~2025-04-21 16:33 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-21 16:31 [PATCH 00/11] vfio/igd: Detect IGD by OpRegion and enable OpRegion automatically Tomita Moeko
2025-04-21 16:31 ` [PATCH 01/11] vfio/igd: Restrict legacy mode to Gen6-9 devices Tomita Moeko
2025-04-24 22:57 ` Alex Williamson
2025-04-21 16:31 ` [PATCH 02/11] vfio/igd: Always emulate ASLS (OpRegion) register Tomita Moeko
2025-04-21 16:31 ` [PATCH 03/11] vfio/igd: Detect IGD device by OpRegion Tomita Moeko
2025-04-23 6:54 ` Corvin Köhne
2025-04-28 15:23 ` Tomita Moeko
2025-04-24 22:57 ` Alex Williamson
2025-04-21 16:31 ` [PATCH 04/11] vfio/igd: Remove vfio_pci_igd_setup_opregion Tomita Moeko
2025-04-21 16:31 ` [PATCH 05/11] vfio/igd: Check vendor and device ID on GVT-g mdev Tomita Moeko
2025-04-21 16:31 ` [PATCH 06/11] vfio/igd: Enable OpRegion by default Tomita Moeko
2025-04-21 16:31 ` [PATCH 07/11] vfio/igd: Allow hotplugging with OpRegion enabled Tomita Moeko
2025-04-24 22:57 ` Alex Williamson
2025-04-28 15:18 ` Tomita Moeko
2025-04-21 16:31 ` Tomita Moeko [this message]
2025-04-23 7:13 ` [PATCH 08/11] vfio/igd: Allow overriding GMS with 0xf0 to 0xfe on Gen9+ Corvin Köhne
2025-04-21 16:31 ` [PATCH 09/11] vfio/igd: Only emulate GGC register when x-igd-gms is set Tomita Moeko
2025-04-21 16:31 ` [PATCH 10/11] vfio/igd: Remove generation limitation for IGD passthrough Tomita Moeko
2025-04-23 7:19 ` Corvin Köhne
2025-04-21 16:31 ` [PATCH 11/11] vfio/igd: Update IGD passthrough documentation Tomita Moeko
2025-04-23 7:21 ` Corvin Köhne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250421163112.21316-9-tomitamoeko@gmail.com \
--to=tomitamoeko@gmail.com \
--cc=alex.williamson@redhat.com \
--cc=c.koehne@beckhoff.com \
--cc=clg@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).