From: Jonathan Cameron via <qemu-devel@nongnu.org>
To: <anisa.su887@gmail.com>
Cc: <qemu-devel@nongnu.org>, <nifan.cxl@gmail.com>,
<dave@stgolabs.net>, <linux-cxl@vger.kernel.org>,
Anisa Su <anisa.su@samsung.com>
Subject: Re: [PATCH 8/9] cxl-mailbox-utils: 0x5604 - FMAPI Initiate DC Add
Date: Thu, 24 Apr 2025 12:19:59 +0100 [thread overview]
Message-ID: <20250424121959.0000042d@huawei.com> (raw)
In-Reply-To: <20250317164204.2299371-9-anisa.su887@gmail.com>
On Mon, 17 Mar 2025 16:31:35 +0000
anisa.su887@gmail.com wrote:
> From: Anisa Su <anisa.su@samsung.com>
>
> FM DCD Management command 0x5604 implemented per CXL r3.2 Spec Section 7.6.7.6.5
>
> Signed-off-by: Anisa Su <anisa.su@samsung.com>
> ---
> hw/cxl/cxl-mailbox-utils.c | 173 ++++++++++++++++++++++++++++++++++++
> hw/mem/cxl_type3.c | 8 +-
> include/hw/cxl/cxl_device.h | 4 +
> 3 files changed, 181 insertions(+), 4 deletions(-)
>
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index 77cf0fdb15..5bcbd434b7 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -127,6 +127,8 @@ enum {
> #define GET_HOST_DC_REGION_CONFIG 0x1
> #define SET_DC_REGION_CONFIG 0x2
> #define GET_DC_REGION_EXTENT_LIST 0x3
> + #define INITIATE_DC_ADD 0x4
> +
No blank line here.
> };
>
> /* CCI Message Format CXL r3.1 Figure 7-19 */
> @@ -3669,6 +3671,170 @@ static CXLRetCode cmd_fm_get_dc_region_extent_list(const struct cxl_cmd *cmd,
> return CXL_MBOX_SUCCESS;
> }
>
> +static CXLRetCode cxl_mbox_dc_prescriptive_sanity_check(CXLType3Dev *dcd,
> + uint16_t host_id,
> + uint32_t ext_count,
> + CXLDCExtentRaw extents[],
> + CXLDCEventType type)
> +{
> + CXLDCExtentRaw ext;
> + CXLDCRegion *reg = NULL;
> + int i, j;
> +
> + if (dcd->dc.num_regions == 0) {
Can we actually get here like that?
> + qemu_log_mask(LOG_UNIMP,
> + "No dynamic capacity support from the device.\n");
> + return CXL_MBOX_UNSUPPORTED;
> + }
> +
> + /* TODO: host id check will be added later, currently host id must be 0. */
> + if (host_id != 0) {
> + return CXL_MBOX_INVALID_INPUT;
> + }
> +
> + for (i = 0; i < ext_count; i++) {
> + ext = extents[i];
> +
> + if (ext.len == 0) {
> + return CXL_MBOX_INVALID_EXTENT_LIST;
> + }
> +
> + reg = cxl_find_dc_region(dcd, ext.start_dpa, ext.len);
> + if (!reg) {
> + return CXL_MBOX_INVALID_EXTENT_LIST;
> + }
> +
> + if (ext.len % reg->block_size || ext.start_dpa % reg->block_size) {
> + return CXL_MBOX_INVALID_EXTENT_LIST;
> + }
> +
> + /* Check requested extents do not overlap with each other. */
> + for (j = i + 1; j < ext_count; j++) {
> + if (ranges_overlap(ext.start_dpa, ext.len, extents[j].start_dpa,
> + extents[j].len)) {
> + return CXL_MBOX_INVALID_EXTENT_LIST;
> + }
> + }
> +
> + if (type == DC_EVENT_ADD_CAPACITY) {
> + /* Check requested extents do not overlap with existing extents. */
> + if (cxl_extents_overlaps_dpa_range(&dcd->dc.extents,
> + ext.start_dpa, ext.len)) {
> + return CXL_MBOX_INVALID_EXTENT_LIST;
> + }
> + }
> + }
> +
> + return CXL_MBOX_SUCCESS;
> +}
> +
> +/*
> + * CXL r3.2 Section 7.6.7.6.5 Initiate Dynamic Capacity Add (Opcode 5604h)
> + */
> +static CXLRetCode cmd_fm_initiate_dc_add(const struct cxl_cmd *cmd,
> + uint8_t *payload_in,
> + size_t len_in,
> + uint8_t *payload_out,
> + size_t *len_out,
> + CXLCCI *cci)
> +{
> + struct {
> + uint16_t host_id;
> + uint8_t selection_policy;
> + uint8_t reg_num;
> + uint64_t length;
> + uint8_t tag[0x10];
> + uint32_t ext_count;
> + CXLDCExtentRaw extents[];
> + } QEMU_PACKED *in = (void *)payload_in;
> + CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
> + g_autofree CXLDCExtentRaw *event_rec_exts = NULL;
Move some of this into the scope of the case below
Or maybe factor out that whole thing as a new function?
> + CXLEventDynamicCapacity event_rec = {};
> + CXLDCExtentGroup *group = NULL;
> + CXLDCExtentRaw ext;
> + int rc, i;
> +
> + switch (in->selection_policy) {
> + case CXL_EXTENT_SELECTION_POLICY_PRESCRIPTIVE:
> + /* Adding extents causes exceeding device's extent tracking ability. */
> + if (in->ext_count + ct3d->dc.total_extent_count >
> + CXL_NUM_EXTENTS_SUPPORTED) {
> + return CXL_MBOX_RESOURCES_EXHAUSTED;
> + }
> + rc = cxl_mbox_dc_prescriptive_sanity_check(ct3d,
> + in->host_id,
> + in->ext_count,
> + in->extents,
> + DC_EVENT_ADD_CAPACITY);
> + if (rc) {
> + return rc;
> + }
> +
> + /* Prepare extents for Event Record */
> + event_rec_exts = g_new0(CXLDCExtentRaw, in->ext_count);
> + for (i = 0; i < in->ext_count; i++) {
> + ext = in->extents[i];
> + event_rec_exts[i].start_dpa = ext.start_dpa;
> + event_rec_exts[i].len = ext.len;
> + memset(event_rec_exts[i].tag, 0, 0x10);
> + event_rec_exts[i].shared_seq = 0;
> +
> + /* Check requested extents do not overlap with pending extents. */
> + if (cxl_extent_groups_overlaps_dpa_range(&ct3d->dc.extents_pending,
> + ext.start_dpa, ext.len)) {
> + return CXL_MBOX_INVALID_EXTENT_LIST;
> + }
> +
> + /* Create extent group to add to pending list. */
> + group = cxl_insert_extent_to_extent_group(group,
> + event_rec_exts[i].start_dpa,
> + event_rec_exts[i].len,
> + event_rec_exts[i].tag,
> + event_rec_exts[i].shared_seq);
> + }
> +
> + /* Add requested extents to pending list. */
> + if (group) {
> + cxl_extent_group_list_insert_tail(&ct3d->dc.extents_pending, group);
> + }
> +
> + /* Create event record and insert to event log */
> + cxl_mbox_dc_event_create_record_hdr(ct3d, &event_rec.hdr);
> + event_rec.type = DC_EVENT_ADD_CAPACITY;
> + /* FIXME: for now, validity flag is cleared */
This stuff is probably all valid. If we can return remaining extents though we might
as well.
> + event_rec.validity_flags = 0;
> + /* FIXME: Currently only support 1 host */
> + event_rec.host_id = 0;
> + /* updated_region_id only valid for DC_EVENT_REGION_CONFIG_UPDATED */
> + event_rec.updated_region_id = 0;
The event_rec is zeroed anyway so probably just don't set this at all
and no need for the comment.
> + for (i = 0; i < in->ext_count; i++) {
Why can't we combine this with the earlier loop and avoid the
need for separate storage of extents in event_rec_exts?
> + memcpy(&event_rec.dynamic_capacity_extent,
> + &event_rec_exts[i],
> + sizeof(CXLDCExtentRaw));
> +
> + event_rec.flags = 0;
> + if (i < in->ext_count - 1) {
> + /* Set "More" flag */
> + event_rec.flags |= BIT(0);
> + }
> +
> + if (cxl_event_insert(&ct3d->cxl_dstate,
> + CXL_EVENT_TYPE_DYNAMIC_CAP,
> + (CXLEventRecordRaw *)&event_rec)) {
> + cxl_event_irq_assert(ct3d);
> + }
> + }
> +
> + return CXL_MBOX_SUCCESS;
> + default:
> + qemu_log_mask(LOG_UNIMP,
> + "CXL extent selection policy not supported.\n");
> + return CXL_MBOX_INVALID_INPUT;
> + }
> +
> + return CXL_MBOX_SUCCESS;
> +}
> +
> static const struct cxl_cmd cxl_cmd_set[256][256] = {
> [INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
> cmd_infostat_bg_op_abort, 0, 0 },
> @@ -3804,6 +3970,13 @@ static const struct cxl_cmd cxl_cmd_set_fm_dcd[256][256] = {
> CXL_MBOX_IMMEDIATE_DATA_CHANGE)},
> [FMAPI_DCD_MGMT][GET_DC_REGION_EXTENT_LIST] = { "GET_DC_REGION_EXTENT_LIST",
> cmd_fm_get_dc_region_extent_list, 12, 0},
> + [FMAPI_DCD_MGMT][INITIATE_DC_ADD] = { "INIT_DC_ADD",
> + cmd_fm_initiate_dc_add, ~0,
> + (CXL_MBOX_CONFIG_CHANGE_COLD_RESET |
> + CXL_MBOX_CONFIG_CHANGE_CONV_RESET |
> + CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
> + CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
> + CXL_MBOX_IMMEDIATE_DATA_CHANGE)},
> };
>
> /*
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> index b742b2bb8d..ccc619fe10 100644
> --- a/hw/mem/cxl_type3.c
> +++ b/hw/mem/cxl_type3.c
> @@ -1982,8 +1982,8 @@ void qmp_cxl_inject_memory_module_event(const char *path, CxlEventLog log,
> * the list.
> * Return value: return true if has overlaps; otherwise, return false
> */
> -static bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> - uint64_t dpa, uint64_t len)
> +bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> + uint64_t dpa, uint64_t len)
> {
> CXLDCExtent *ent;
> Range range1, range2;
> @@ -2028,8 +2028,8 @@ bool cxl_extents_contains_dpa_range(CXLDCExtentList *list,
> return false;
> }
>
> -static bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> - uint64_t dpa, uint64_t len)
> +bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> + uint64_t dpa, uint64_t len)
> {
> CXLDCExtentGroup *group;
>
> diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> index 217003a29d..1d5831a0b6 100644
> --- a/include/hw/cxl/cxl_device.h
> +++ b/include/hw/cxl/cxl_device.h
> @@ -809,4 +809,8 @@ bool ct3_test_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
> void cxl_assign_event_header(CXLEventRecordHdr *hdr,
> const QemuUUID *uuid, uint32_t flags,
> uint8_t length, uint64_t timestamp);
> +bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> + uint64_t dpa, uint64_t len);
> +bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> + uint64_t dpa, uint64_t len);
> #endif
next prev parent reply other threads:[~2025-04-24 11:21 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-17 16:31 [PATCH 0/9] CXL: FMAPI DCD Management Commands 0x5600-0x5605 anisa.su887
2025-03-17 16:31 ` [PATCH 1/9] cxl/type3: Add supported block sizes bitmask to CXLDCRegion struct anisa.su887
2025-04-24 10:11 ` Jonathan Cameron via
2025-04-29 17:56 ` Anisa Su
2025-03-17 16:31 ` [PATCH 2/9] cxl-mailbox-utils: 0x5600 - FMAPI Get DCD Info anisa.su887
2025-03-18 15:56 ` Jonathan Cameron via
2025-03-31 19:38 ` Anisa Su
2025-04-14 16:52 ` Anisa Su
2025-04-24 10:21 ` Jonathan Cameron via
2025-04-16 21:25 ` Anisa Su
2025-04-24 10:30 ` Jonathan Cameron via
2025-03-17 16:31 ` [PATCH 3/9] cxl/type3: Add dsmas_flags to CXLDCRegion struct anisa.su887
2025-04-24 10:42 ` Jonathan Cameron via
2025-05-01 20:21 ` Fan Ni
2025-05-02 9:01 ` Jonathan Cameron via
2025-05-02 15:57 ` Fan Ni
2025-05-06 16:53 ` Jonathan Cameron via
2025-03-17 16:31 ` [PATCH 4/9] cxl-mailbox-utils: 0x5601 - FMAPI Get Host Region Config anisa.su887
2025-04-24 10:53 ` Jonathan Cameron via
2025-03-17 16:31 ` [PATCH 5/9] cxl_events.h: move definition for dynamic_capacity_uuid and enum for DC event types anisa.su887
2025-04-24 10:55 ` Jonathan Cameron via
2025-03-17 16:31 ` [PATCH 6/9] cxl-mailbox-utils: 0x5602 - FMAPI Set DC Region Config anisa.su887
2025-04-16 21:33 ` Anisa Su
2025-04-24 11:05 ` Jonathan Cameron via
2025-03-17 16:31 ` [PATCH 7/9] cxl-mailbox-utils: 0x5603 - FMAPI Get DC Region Extent Lists anisa.su887
2025-04-24 11:10 ` Jonathan Cameron via
2025-03-17 16:31 ` [PATCH 8/9] cxl-mailbox-utils: 0x5604 - FMAPI Initiate DC Add anisa.su887
2025-04-24 11:19 ` Jonathan Cameron via [this message]
2025-04-28 20:41 ` Fan Ni
2025-05-05 16:40 ` Anisa Su
2025-05-06 16:55 ` Jonathan Cameron via
2025-03-17 16:31 ` [PATCH 9/9] cxl-mailbox-utils: 0x5605 - FMAPI Initiate DC Release anisa.su887
2025-04-24 11:23 ` Jonathan Cameron via
2025-04-28 20:44 ` Fan Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250424121959.0000042d@huawei.com \
--to=qemu-devel@nongnu.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=anisa.su887@gmail.com \
--cc=anisa.su@samsung.com \
--cc=dave@stgolabs.net \
--cc=linux-cxl@vger.kernel.org \
--cc=nifan.cxl@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).