* [PULL 01/23] hw/arm: ast27x0: Wire up EHCI controllers
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 02/23] hw/ssi/aspeed_smc: Allow 64-bit wide flash accesses Cédric Le Goater
` (23 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Troy Lee, Cédric Le Goater
From: Troy Lee <troy_lee@aspeedtech.com>
AST27x0 has 4 EHCI controllers, where each CPU and I/O die has 2
instances. This patch use existing TYPE_PLATFORM_EHCI. After wiring up
the EHCI controller, the ast2700a1-evb can find up to 4 USB EHCI
interfaces.
ehci-platform 12061000.usb: EHCI Host Controller
ehci-platform 12061000.usb: new USB bus registered, assigned bus number 2
ehci-platform 12063000.usb: EHCI Host Controller
ehci-platform 12063000.usb: new USB bus registered, assigned bus number 3
ehci-platform 12061000.usb: irq 88, io mem 0x12061000
ehci-platform 12063000.usb: irq 90, io mem 0x12063000
ehci-platform 14121000.usb: EHCI Host Controller
ehci-platform 14123000.usb: EHCI Host Controller
ehci-platform 12061000.usb: USB 2.0 started, EHCI 1.00
ehci-platform 14121000.usb: new USB bus registered, assigned bus number 5
ehci-platform 14123000.usb: new USB bus registered, assigned bus number 6
ehci-platform 14121000.usb: irq 91, io mem 0x14121000
ehci-platform 14123000.usb: irq 92, io mem 0x14123000
ehci-platform 12063000.usb: USB 2.0 started, EHCI 1.00
usb usb2: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
usb usb3: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
ehci-platform 14121000.usb: USB 2.0 started, EHCI 1.00
usb usb5: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
ehci-platform 14123000.usb: USB 2.0 started, EHCI 1.00
usb usb6: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
Note that, AST27x0A0 only has 2 EHCI controllers due to hw issue.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250317065938.1902272-2-troy_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/arm/aspeed_soc.h | 4 +++-
hw/arm/aspeed_ast27x0.c | 28 ++++++++++++++++++++++++++++
2 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index f069d17d1629..c1e80c8908b3 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -43,7 +43,7 @@
#include "hw/intc/arm_gicv3.h"
#define ASPEED_SPIS_NUM 3
-#define ASPEED_EHCIS_NUM 2
+#define ASPEED_EHCIS_NUM 4
#define ASPEED_WDTS_NUM 8
#define ASPEED_CPUS_NUM 4
#define ASPEED_MACS_NUM 4
@@ -192,6 +192,8 @@ enum {
ASPEED_DEV_SPI2,
ASPEED_DEV_EHCI1,
ASPEED_DEV_EHCI2,
+ ASPEED_DEV_EHCI3,
+ ASPEED_DEV_EHCI4,
ASPEED_DEV_VIC,
ASPEED_DEV_INTC,
ASPEED_DEV_INTCIO,
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 63a366f7e837..ea4a611b9068 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -25,6 +25,8 @@
static const hwaddr aspeed_soc_ast2700_memmap[] = {
[ASPEED_DEV_SRAM] = 0x10000000,
+ [ASPEED_DEV_EHCI1] = 0x12061000,
+ [ASPEED_DEV_EHCI2] = 0x12063000,
[ASPEED_DEV_HACE] = 0x12070000,
[ASPEED_DEV_EMMC] = 0x12090000,
[ASPEED_DEV_INTC] = 0x12100000,
@@ -47,6 +49,8 @@ static const hwaddr aspeed_soc_ast2700_memmap[] = {
[ASPEED_DEV_ETH2] = 0x14060000,
[ASPEED_DEV_ETH3] = 0x14070000,
[ASPEED_DEV_SDHCI] = 0x14080000,
+ [ASPEED_DEV_EHCI3] = 0x14121000,
+ [ASPEED_DEV_EHCI4] = 0x14123000,
[ASPEED_DEV_ADC] = 0x14C00000,
[ASPEED_DEV_SCUIO] = 0x14C02000,
[ASPEED_DEV_GPIO] = 0x14C0B000,
@@ -91,6 +95,8 @@ static const int aspeed_soc_ast2700a0_irqmap[] = {
[ASPEED_DEV_TIMER7] = 22,
[ASPEED_DEV_TIMER8] = 23,
[ASPEED_DEV_DP] = 28,
+ [ASPEED_DEV_EHCI1] = 33,
+ [ASPEED_DEV_EHCI2] = 37,
[ASPEED_DEV_LPC] = 128,
[ASPEED_DEV_IBT] = 128,
[ASPEED_DEV_KCS] = 128,
@@ -137,6 +143,8 @@ static const int aspeed_soc_ast2700a1_irqmap[] = {
[ASPEED_DEV_TIMER7] = 22,
[ASPEED_DEV_TIMER8] = 23,
[ASPEED_DEV_DP] = 28,
+ [ASPEED_DEV_EHCI1] = 33,
+ [ASPEED_DEV_EHCI2] = 37,
[ASPEED_DEV_LPC] = 192,
[ASPEED_DEV_IBT] = 192,
[ASPEED_DEV_KCS] = 192,
@@ -212,6 +220,8 @@ static const int ast2700_gic132_gic196_intcmap[] = {
[ASPEED_DEV_UART10] = 16,
[ASPEED_DEV_UART11] = 17,
[ASPEED_DEV_UART12] = 18,
+ [ASPEED_DEV_EHCI3] = 28,
+ [ASPEED_DEV_EHCI4] = 29,
};
/* GICINT 133 */
@@ -434,6 +444,11 @@ static void aspeed_soc_ast2700_init(Object *obj)
object_initialize_child(obj, "spi[*]", &s->spi[i], typename);
}
+ for (i = 0; i < sc->ehcis_num; i++) {
+ object_initialize_child(obj, "ehci[*]", &s->ehci[i],
+ TYPE_PLATFORM_EHCI);
+ }
+
snprintf(typename, sizeof(typename), "aspeed.sdmc-%s", socname);
object_initialize_child(obj, "sdmc", &s->sdmc, typename);
object_property_add_alias(obj, "ram-size", OBJECT(&s->sdmc),
@@ -709,6 +724,17 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
}
+ /* EHCI */
+ for (i = 0; i < sc->ehcis_num; i++) {
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->ehci[i]), errp)) {
+ return;
+ }
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->ehci[i]), 0,
+ sc->memmap[ASPEED_DEV_EHCI1 + i]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci[i]), 0,
+ aspeed_soc_get_irq(s, ASPEED_DEV_EHCI1 + i));
+ }
+
/*
* SDMC - SDRAM Memory Controller
* The SDMC controller is unlocked at SPL stage.
@@ -900,6 +926,7 @@ static void aspeed_soc_ast2700a0_class_init(ObjectClass *oc, const void *data)
sc->silicon_rev = AST2700_A0_SILICON_REV;
sc->sram_size = 0x20000;
sc->spis_num = 3;
+ sc->ehcis_num = 2;
sc->wdts_num = 8;
sc->macs_num = 1;
sc->uarts_num = 13;
@@ -927,6 +954,7 @@ static void aspeed_soc_ast2700a1_class_init(ObjectClass *oc, const void *data)
sc->silicon_rev = AST2700_A1_SILICON_REV;
sc->sram_size = 0x20000;
sc->spis_num = 3;
+ sc->ehcis_num = 4;
sc->wdts_num = 8;
sc->macs_num = 3;
sc->uarts_num = 13;
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 02/23] hw/ssi/aspeed_smc: Allow 64-bit wide flash accesses
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
2025-05-05 9:06 ` [PULL 01/23] hw/arm: ast27x0: Wire up EHCI controllers Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 03/23] tests/functional/aspeed: Update test ASPEED SDK v09.06 for AST2500 Cédric Le Goater
` (22 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Joe Komlodi, Cédric Le Goater
From: Joe Komlodi <komlodi@google.com>
cde3247651dc998da5dc1005148302a90d72f21f fixed atomicity for LDRD, which
ends up making accesses 64-bits wide. However, the AST2600 bootloader
can sometimes compile with LDRD instructions, which causes the acceses
to fail when accessing the memory-mapped SPI flash.
To fix this, increase the MMIO region valid access size to allow for
64-bit accesses.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250422002747.2593465-1-komlodi@google.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/ssi/aspeed_smc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index 0d38f95c7a39..614528b8ef65 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -359,7 +359,7 @@ static const MemoryRegionOps aspeed_smc_flash_default_ops = {
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 1,
- .max_access_size = 4,
+ .max_access_size = 8,
},
};
@@ -670,7 +670,7 @@ static const MemoryRegionOps aspeed_smc_flash_ops = {
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 1,
- .max_access_size = 4,
+ .max_access_size = 8,
},
};
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 03/23] tests/functional/aspeed: Update test ASPEED SDK v09.06 for AST2500
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
2025-05-05 9:06 ` [PULL 01/23] hw/arm: ast27x0: Wire up EHCI controllers Cédric Le Goater
2025-05-05 9:06 ` [PULL 02/23] hw/ssi/aspeed_smc: Allow 64-bit wide flash accesses Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 04/23] tests/functional/aspeed: Update test ASPEED SDK v09.06 for AST2600 Cédric Le Goater
` (21 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250423014008.147542-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/test_arm_aspeed_ast2500.py | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tests/functional/test_arm_aspeed_ast2500.py b/tests/functional/test_arm_aspeed_ast2500.py
index a3b44572fcf6..6923fe870170 100755
--- a/tests/functional/test_arm_aspeed_ast2500.py
+++ b/tests/functional/test_arm_aspeed_ast2500.py
@@ -37,14 +37,14 @@ def test_arm_ast2500_evb_buildroot(self):
self.do_test_arm_aspeed_buildroot_poweroff()
- ASSET_SDK_V806_AST2500 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v08.06/ast2500-default-obmc.tar.gz',
- 'e1755f3cadff69190438c688d52dd0f0d399b70a1e14b1d3d5540fc4851d38ca')
+ ASSET_SDK_V906_AST2500 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v09.06/ast2500-default-obmc.tar.gz',
+ '542db84645b4efd8aed50385d7f4dd1caff379a987032311cfa7b563a3addb2a')
def test_arm_ast2500_evb_sdk(self):
self.set_machine('ast2500-evb')
- self.archive_extract(self.ASSET_SDK_V806_AST2500)
+ self.archive_extract(self.ASSET_SDK_V906_AST2500)
self.do_test_arm_aspeed_sdk_start(
self.scratch_file("ast2500-default", "image-bmc"))
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 04/23] tests/functional/aspeed: Update test ASPEED SDK v09.06 for AST2600
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (2 preceding siblings ...)
2025-05-05 9:06 ` [PULL 03/23] tests/functional/aspeed: Update test ASPEED SDK v09.06 for AST2500 Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 05/23] tests/functional/aspeed: Update test ASPEED SDK v03.00 for AST1030 Cédric Le Goater
` (20 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Update test for AST2600 production revision A3.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250423014008.147542-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/test_arm_aspeed_ast2600.py | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/tests/functional/test_arm_aspeed_ast2600.py b/tests/functional/test_arm_aspeed_ast2600.py
index 5ef52f06595d..fdae4c939d8c 100755
--- a/tests/functional/test_arm_aspeed_ast2600.py
+++ b/tests/functional/test_arm_aspeed_ast2600.py
@@ -97,26 +97,27 @@ def test_arm_ast2600_evb_buildroot_tpm(self):
self.do_test_arm_aspeed_buildroot_poweroff()
- ASSET_SDK_V806_AST2600_A2 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v08.06/ast2600-a2-obmc.tar.gz',
- '9083506135f622d5e7351fcf7d4e1c7125cee5ba16141220c0ba88931f3681a4')
+ ASSET_SDK_V906_AST2600 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v09.06/ast2600-default-obmc.tar.gz',
+ '768d76e247896ad78c154b9cff4f766da2ce65f217d620b286a4a03a8a4f68f5')
def test_arm_ast2600_evb_sdk(self):
self.set_machine('ast2600-evb')
- self.archive_extract(self.ASSET_SDK_V806_AST2600_A2)
+ self.archive_extract(self.ASSET_SDK_V906_AST2600)
self.vm.add_args('-device',
'tmp105,bus=aspeed.i2c.bus.5,address=0x4d,id=tmp-test')
self.vm.add_args('-device',
'ds1338,bus=aspeed.i2c.bus.5,address=0x32')
self.do_test_arm_aspeed_sdk_start(
- self.scratch_file("ast2600-a2", "image-bmc"))
+ self.scratch_file("ast2600-default", "image-bmc"))
- self.wait_for_console_pattern('ast2600-a2 login:')
+ self.wait_for_console_pattern('ast2600-default login:')
exec_command_and_wait_for_pattern(self, 'root', 'Password:')
- exec_command_and_wait_for_pattern(self, '0penBmc', 'root@ast2600-a2:~#')
+ exec_command_and_wait_for_pattern(self, '0penBmc',
+ 'root@ast2600-default:~#')
exec_command_and_wait_for_pattern(self,
'echo lm75 0x4d > /sys/class/i2c-dev/i2c-5/device/new_device',
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 05/23] tests/functional/aspeed: Update test ASPEED SDK v03.00 for AST1030
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (3 preceding siblings ...)
2025-05-05 9:06 ` [PULL 04/23] tests/functional/aspeed: Update test ASPEED SDK v09.06 for AST2600 Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 06/23] hw/arm/aspeed_ast27x0: Rename variable sram_name to name in ast2700 realize Cédric Le Goater
` (19 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250423014008.147542-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/test_arm_aspeed_ast1030.py | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/tests/functional/test_arm_aspeed_ast1030.py b/tests/functional/test_arm_aspeed_ast1030.py
index d45d9f7c1cf8..77037f01793c 100755
--- a/tests/functional/test_arm_aspeed_ast1030.py
+++ b/tests/functional/test_arm_aspeed_ast1030.py
@@ -12,17 +12,17 @@
class AST1030Machine(LinuxKernelTest):
- ASSET_ZEPHYR_1_04 = Asset(
+ ASSET_ZEPHYR_3_00 = Asset(
('https://github.com/AspeedTech-BMC'
- '/zephyr/releases/download/v00.01.04/ast1030-evb-demo.zip'),
- '4ac6210adcbc61294927918707c6762483fd844dde5e07f3ba834ad1f91434d3')
+ '/zephyr/releases/download/v00.03.00/ast1030-evb-demo.zip'),
+ '37fe3ecd4a1b9d620971a15b96492a81093435396eeac69b6f3e384262ff555f')
- def test_ast1030_zephyros_1_04(self):
+ def test_ast1030_zephyros_3_00(self):
self.set_machine('ast1030-evb')
kernel_name = "ast1030-evb-demo/zephyr.elf"
kernel_file = self.archive_extract(
- self.ASSET_ZEPHYR_1_04, member=kernel_name)
+ self.ASSET_ZEPHYR_3_00, member=kernel_name)
self.vm.set_console()
self.vm.add_args('-kernel', kernel_file, '-nographic')
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 06/23] hw/arm/aspeed_ast27x0: Rename variable sram_name to name in ast2700 realize
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (4 preceding siblings ...)
2025-05-05 9:06 ` [PULL 05/23] tests/functional/aspeed: Update test ASPEED SDK v03.00 for AST1030 Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 07/23] tests/functional/aspeed: Move I2C test into shared helper for AST2700 reuse Cédric Le Goater
` (18 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater, Nabih Estefan
From: Jamin Lin <jamin_lin@aspeedtech.com>
The variable "sram_name" was only used for naming the SRAM memory region.
Rename it to "name" for consistency with similar code and avoid unnecessary
new local variable declarations.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Nabih Estefan <nabihestefan@google.com>
Link: https://lore.kernel.org/qemu-devel/20250423072350.541742-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/arm/aspeed_ast27x0.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index ea4a611b9068..2e21c3a98fa0 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -592,7 +592,7 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
AspeedINTCClass *ic = ASPEED_INTC_GET_CLASS(&a->intc[0]);
AspeedINTCClass *icio = ASPEED_INTC_GET_CLASS(&a->intc[1]);
- g_autofree char *sram_name = NULL;
+ g_autofree char *name = NULL;
qemu_irq irq;
/* Default boot region (SPI memory or ROMs) */
@@ -664,9 +664,9 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
}
/* SRAM */
- sram_name = g_strdup_printf("aspeed.sram.%d", CPU(&a->cpu[0])->cpu_index);
- if (!memory_region_init_ram(&s->sram, OBJECT(s), sram_name, sc->sram_size,
- errp)) {
+ name = g_strdup_printf("aspeed.sram.%d", CPU(&a->cpu[0])->cpu_index);
+ if (!memory_region_init_ram(&s->sram, OBJECT(s), name, sc->sram_size,
+ errp)) {
return;
}
memory_region_add_subregion(s->memory,
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 07/23] tests/functional/aspeed: Move I2C test into shared helper for AST2700 reuse
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (5 preceding siblings ...)
2025-05-05 9:06 ` [PULL 06/23] hw/arm/aspeed_ast27x0: Rename variable sram_name to name in ast2700 realize Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 08/23] tests/functional/aspeed: Update test ASPEED SDK v09.06 Cédric Le Goater
` (17 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Nabih Estefan, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Move the I2C test case into a common helper function (do_ast2700_i2c_test) so it
can be reused across multiple AST2700-based test cases. This reduces duplication
and improves maintainability.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250423072350.541742-8-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/test_aarch64_aspeed.py | 28 +++++++++++++------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/tests/functional/test_aarch64_aspeed.py b/tests/functional/test_aarch64_aspeed.py
index c7f3b3b319fd..4b6851db2add 100755
--- a/tests/functional/test_aarch64_aspeed.py
+++ b/tests/functional/test_aarch64_aspeed.py
@@ -18,6 +18,8 @@ class AST2x00MachineSDK(QemuSystemTest):
def do_test_aarch64_aspeed_sdk_start(self, image):
self.require_netdev('user')
self.vm.set_console()
+ self.vm.add_args('-device',
+ 'tmp105,bus=aspeed.i2c.bus.1,address=0x4d,id=tmp-test')
self.vm.add_args('-drive', 'file=' + image + ',if=mtd,format=raw',
'-net', 'nic', '-net', 'user', '-snapshot')
@@ -35,6 +37,17 @@ def do_test_aarch64_aspeed_sdk_start(self, image):
'https://github.com/AspeedTech-BMC/openbmc/releases/download/v09.05/ast2700-default-obmc.tar.gz',
'c1f4496aec06743c812a6e9a1a18d032f34d62f3ddb6956e924fef62aa2046a5')
+ def do_ast2700_i2c_test(self):
+ exec_command_and_wait_for_pattern(self,
+ 'echo lm75 0x4d > /sys/class/i2c-dev/i2c-1/device/new_device ',
+ 'i2c i2c-1: new_device: Instantiated device lm75 at 0x4d')
+ exec_command_and_wait_for_pattern(self,
+ 'cat /sys/bus/i2c/devices/1-004d/hwmon/hwmon*/temp1_input', '0')
+ self.vm.cmd('qom-set', path='/machine/peripheral/tmp-test',
+ property='temperature', value=18000)
+ exec_command_and_wait_for_pattern(self,
+ 'cat /sys/bus/i2c/devices/1-004d/hwmon/hwmon*/temp1_input', '18000')
+
def start_ast2700_test(self, name):
num_cpu = 4
uboot_size = os.path.getsize(self.scratch_file(name,
@@ -73,8 +86,6 @@ def start_ast2700_test(self, name):
f'loader,addr=0x430000000,cpu-num={i}')
self.vm.add_args('-smp', str(num_cpu))
- self.vm.add_args('-device',
- 'tmp105,bus=aspeed.i2c.bus.1,address=0x4d,id=tmp-test')
self.do_test_aarch64_aspeed_sdk_start(
self.scratch_file(name, 'image-bmc'))
@@ -83,28 +94,19 @@ def start_ast2700_test(self, name):
exec_command_and_wait_for_pattern(self, 'root', 'Password:')
exec_command_and_wait_for_pattern(self, '0penBmc', f'root@{name}:~#')
- exec_command_and_wait_for_pattern(self,
- 'echo lm75 0x4d > /sys/class/i2c-dev/i2c-1/device/new_device ',
- 'i2c i2c-1: new_device: Instantiated device lm75 at 0x4d')
- exec_command_and_wait_for_pattern(self,
- 'cat /sys/bus/i2c/devices/1-004d/hwmon/hwmon*/temp1_input', '0')
- self.vm.cmd('qom-set', path='/machine/peripheral/tmp-test',
- property='temperature', value=18000)
- exec_command_and_wait_for_pattern(self,
- 'cat /sys/bus/i2c/devices/1-004d/hwmon/hwmon*/temp1_input', '18000')
-
def test_aarch64_ast2700_evb_sdk_v09_05(self):
self.set_machine('ast2700-evb')
self.archive_extract(self.ASSET_SDK_V905_AST2700)
self.start_ast2700_test('ast2700-a0-default')
+ self.do_ast2700_i2c_test()
def test_aarch64_ast2700a1_evb_sdk_v09_05(self):
self.set_machine('ast2700a1-evb')
self.archive_extract(self.ASSET_SDK_V905_AST2700A1)
self.start_ast2700_test('ast2700-default')
-
+ self.do_ast2700_i2c_test()
if __name__ == '__main__':
QemuSystemTest.main()
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 08/23] tests/functional/aspeed: Update test ASPEED SDK v09.06
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (6 preceding siblings ...)
2025-05-05 9:06 ` [PULL 07/23] tests/functional/aspeed: Move I2C test into shared helper for AST2700 reuse Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 09/23] tests/functional/aspeed: extract boot and login sequence into helper function Cédric Le Goater
` (16 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250423072350.541742-9-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/test_aarch64_aspeed.py | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/tests/functional/test_aarch64_aspeed.py b/tests/functional/test_aarch64_aspeed.py
index 4b6851db2add..b6e2be1f8292 100755
--- a/tests/functional/test_aarch64_aspeed.py
+++ b/tests/functional/test_aarch64_aspeed.py
@@ -29,13 +29,13 @@ def do_test_aarch64_aspeed_sdk_start(self, image):
wait_for_console_pattern(self, '## Loading kernel from FIT Image')
wait_for_console_pattern(self, 'Starting kernel ...')
- ASSET_SDK_V905_AST2700 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v09.05/ast2700-a0-default-obmc.tar.gz',
- 'cfbbd1cce72f2a3b73b9080c41eecdadebb7077fba4f7806d72ac99f3e84b74a')
+ ASSET_SDK_V906_AST2700 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v09.06/ast2700-a0-default-obmc.tar.gz',
+ '7247b6f19dbfb700686f8d9f723ac23f3eb229226c0589cb9b06b80d1b61f3cb')
- ASSET_SDK_V905_AST2700A1 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v09.05/ast2700-default-obmc.tar.gz',
- 'c1f4496aec06743c812a6e9a1a18d032f34d62f3ddb6956e924fef62aa2046a5')
+ ASSET_SDK_V906_AST2700A1 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v09.06/ast2700-default-obmc.tar.gz',
+ 'f1d53e0be8a404ecce3e105f72bc50fa4e090ad13160ffa91b10a6e0233a9dc6')
def do_ast2700_i2c_test(self):
exec_command_and_wait_for_pattern(self,
@@ -94,17 +94,17 @@ def start_ast2700_test(self, name):
exec_command_and_wait_for_pattern(self, 'root', 'Password:')
exec_command_and_wait_for_pattern(self, '0penBmc', f'root@{name}:~#')
- def test_aarch64_ast2700_evb_sdk_v09_05(self):
+ def test_aarch64_ast2700_evb_sdk_v09_06(self):
self.set_machine('ast2700-evb')
- self.archive_extract(self.ASSET_SDK_V905_AST2700)
+ self.archive_extract(self.ASSET_SDK_V906_AST2700)
self.start_ast2700_test('ast2700-a0-default')
self.do_ast2700_i2c_test()
- def test_aarch64_ast2700a1_evb_sdk_v09_05(self):
+ def test_aarch64_ast2700a1_evb_sdk_v09_06(self):
self.set_machine('ast2700a1-evb')
- self.archive_extract(self.ASSET_SDK_V905_AST2700A1)
+ self.archive_extract(self.ASSET_SDK_V906_AST2700A1)
self.start_ast2700_test('ast2700-default')
self.do_ast2700_i2c_test()
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 09/23] tests/functional/aspeed: extract boot and login sequence into helper function
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (7 preceding siblings ...)
2025-05-05 9:06 ` [PULL 08/23] tests/functional/aspeed: Update test ASPEED SDK v09.06 Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 10/23] hw/arm/aspeed_ast27x0 Introduce vbootrom memory region Cédric Le Goater
` (15 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Extracted repeated boot and login steps into a new helper function.
No change in functional behavior.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250423072350.541742-10-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/test_aarch64_aspeed.py | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/tests/functional/test_aarch64_aspeed.py b/tests/functional/test_aarch64_aspeed.py
index b6e2be1f8292..1e1f3f9ecece 100755
--- a/tests/functional/test_aarch64_aspeed.py
+++ b/tests/functional/test_aarch64_aspeed.py
@@ -25,10 +25,15 @@ def do_test_aarch64_aspeed_sdk_start(self, image):
self.vm.launch()
+ def verify_openbmc_boot_and_login(self, name):
wait_for_console_pattern(self, 'U-Boot 2023.10')
wait_for_console_pattern(self, '## Loading kernel from FIT Image')
wait_for_console_pattern(self, 'Starting kernel ...')
+ wait_for_console_pattern(self, f'{name} login:')
+ exec_command_and_wait_for_pattern(self, 'root', 'Password:')
+ exec_command_and_wait_for_pattern(self, '0penBmc', f'root@{name}:~#')
+
ASSET_SDK_V906_AST2700 = Asset(
'https://github.com/AspeedTech-BMC/openbmc/releases/download/v09.06/ast2700-a0-default-obmc.tar.gz',
'7247b6f19dbfb700686f8d9f723ac23f3eb229226c0589cb9b06b80d1b61f3cb')
@@ -89,16 +94,12 @@ def start_ast2700_test(self, name):
self.do_test_aarch64_aspeed_sdk_start(
self.scratch_file(name, 'image-bmc'))
- wait_for_console_pattern(self, f'{name} login:')
-
- exec_command_and_wait_for_pattern(self, 'root', 'Password:')
- exec_command_and_wait_for_pattern(self, '0penBmc', f'root@{name}:~#')
-
def test_aarch64_ast2700_evb_sdk_v09_06(self):
self.set_machine('ast2700-evb')
self.archive_extract(self.ASSET_SDK_V906_AST2700)
self.start_ast2700_test('ast2700-a0-default')
+ self.verify_openbmc_boot_and_login('ast2700-a0-default')
self.do_ast2700_i2c_test()
def test_aarch64_ast2700a1_evb_sdk_v09_06(self):
@@ -106,6 +107,7 @@ def test_aarch64_ast2700a1_evb_sdk_v09_06(self):
self.archive_extract(self.ASSET_SDK_V906_AST2700A1)
self.start_ast2700_test('ast2700-default')
+ self.verify_openbmc_boot_and_login('ast2700-default')
self.do_ast2700_i2c_test()
if __name__ == '__main__':
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 10/23] hw/arm/aspeed_ast27x0 Introduce vbootrom memory region
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (8 preceding siblings ...)
2025-05-05 9:06 ` [PULL 09/23] tests/functional/aspeed: extract boot and login sequence into helper function Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 11/23] hw/arm/aspeed: Add support for loading vbootrom image via "-bios" Cédric Le Goater
` (14 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Nabih Estefan, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Introduce a new vbootrom memory region. The region is mapped at address
"0x00000000" and has a size of 128KB, identical to the SRAM region size.
This memory region is intended for loading a vbootrom image file as part of the
boot process.
The vbootrom registered in the SoC's address space using the ASPEED_DEV_VBOOTROM
index.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Nabih Estefan <nabihestefan@google.com>
Tested-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250424075135.3715128-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/arm/aspeed_soc.h | 2 ++
hw/arm/aspeed_ast27x0.c | 9 +++++++++
2 files changed, 11 insertions(+)
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index c1e80c8908b3..4dcb1010dc28 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -59,6 +59,7 @@ struct AspeedSoCState {
MemoryRegion sram;
MemoryRegion spi_boot_container;
MemoryRegion spi_boot;
+ MemoryRegion vbootrom;
AddressSpace dram_as;
AspeedRtcState rtc;
AspeedTimerCtrlState timerctrl;
@@ -169,6 +170,7 @@ struct AspeedSoCClass {
const char *aspeed_soc_cpu_type(AspeedSoCClass *sc);
enum {
+ ASPEED_DEV_VBOOTROM,
ASPEED_DEV_SPI_BOOT,
ASPEED_DEV_IOMEM,
ASPEED_DEV_UART0,
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 2e21c3a98fa0..a289e65e495d 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -24,6 +24,7 @@
#include "qemu/log.h"
static const hwaddr aspeed_soc_ast2700_memmap[] = {
+ [ASPEED_DEV_VBOOTROM] = 0x00000000,
[ASPEED_DEV_SRAM] = 0x10000000,
[ASPEED_DEV_EHCI1] = 0x12061000,
[ASPEED_DEV_EHCI2] = 0x12063000,
@@ -672,6 +673,14 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
memory_region_add_subregion(s->memory,
sc->memmap[ASPEED_DEV_SRAM], &s->sram);
+ /* VBOOTROM */
+ if (!memory_region_init_ram(&s->vbootrom, OBJECT(s), "aspeed.vbootrom",
+ 0x20000, errp)) {
+ return;
+ }
+ memory_region_add_subregion(s->memory,
+ sc->memmap[ASPEED_DEV_VBOOTROM], &s->vbootrom);
+
/* SCU */
if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) {
return;
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 11/23] hw/arm/aspeed: Add support for loading vbootrom image via "-bios"
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (9 preceding siblings ...)
2025-05-05 9:06 ` [PULL 10/23] hw/arm/aspeed_ast27x0 Introduce vbootrom memory region Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 12/23] tests/functional/aspeed: Add to test vbootrom for AST2700 Cédric Le Goater
` (13 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Nabih Estefan, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Introduce "aspeed_load_vbootrom()" to support loading a virtual boot ROM image
into the vbootrom memory region, using the "-bios" command-line option.
Introduce a new "vbootrom" field in the AspeedMachineClass to indicate whether
a machine supports the virtual boot ROM region.
Set this field to true by default for the AST2700-A0 and AST2700-A1 EVB
machines.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Nabih Estefan <nabihestefan@google.com>
Tested-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250424075135.3715128-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/arm/aspeed.h | 1 +
hw/arm/aspeed.c | 36 ++++++++++++++++++++++++++++++++++++
2 files changed, 37 insertions(+)
diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h
index 9cae45a1c99c..973277bea655 100644
--- a/include/hw/arm/aspeed.h
+++ b/include/hw/arm/aspeed.h
@@ -40,6 +40,7 @@ struct AspeedMachineClass {
void (*i2c_init)(AspeedMachineState *bmc);
uint32_t uart_default;
bool sdhci_wp_inverted;
+ bool vbootrom;
};
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 20f418fb63bc..d0b333646e99 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -27,6 +27,7 @@
#include "system/reset.h"
#include "hw/loader.h"
#include "qemu/error-report.h"
+#include "qemu/datadir.h"
#include "qemu/units.h"
#include "hw/qdev-clock.h"
#include "system/system.h"
@@ -305,6 +306,33 @@ static void aspeed_install_boot_rom(AspeedMachineState *bmc, BlockBackend *blk,
rom_size, &error_abort);
}
+#define VBOOTROM_FILE_NAME "ast27x0_bootrom.bin"
+
+/*
+ * This function locates the vbootrom image file specified via the command line
+ * using the -bios option. It loads the specified image into the vbootrom
+ * memory region and handles errors if the file cannot be found or loaded.
+ */
+static void aspeed_load_vbootrom(AspeedMachineState *bmc, const char *bios_name,
+ Error **errp)
+{
+ g_autofree char *filename = NULL;
+ AspeedSoCState *soc = bmc->soc;
+ int ret;
+
+ filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+ if (!filename) {
+ error_setg(errp, "Could not find vbootrom image '%s'", bios_name);
+ return;
+ }
+
+ ret = load_image_mr(filename, &soc->vbootrom);
+ if (ret < 0) {
+ error_setg(errp, "Failed to load vbootrom image '%s'", bios_name);
+ return;
+ }
+}
+
void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
unsigned int count, int unit0)
{
@@ -380,6 +408,7 @@ static void aspeed_machine_init(MachineState *machine)
AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine);
AspeedSoCClass *sc;
int i;
+ const char *bios_name = NULL;
DriveInfo *emmc0 = NULL;
bool boot_emmc;
@@ -482,6 +511,11 @@ static void aspeed_machine_init(MachineState *machine)
}
}
+ if (amc->vbootrom) {
+ bios_name = machine->firmware ?: VBOOTROM_FILE_NAME;
+ aspeed_load_vbootrom(bmc, bios_name, &error_abort);
+ }
+
arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo);
}
@@ -1701,6 +1735,7 @@ static void aspeed_machine_ast2700a0_evb_class_init(ObjectClass *oc,
amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON | ASPEED_MAC2_ON;
amc->uart_default = ASPEED_DEV_UART12;
amc->i2c_init = ast2700_evb_i2c_init;
+ amc->vbootrom = true;
mc->auto_create_sdcard = true;
mc->default_ram_size = 1 * GiB;
aspeed_machine_class_init_cpus_defaults(mc);
@@ -1722,6 +1757,7 @@ static void aspeed_machine_ast2700a1_evb_class_init(ObjectClass *oc,
amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON | ASPEED_MAC2_ON;
amc->uart_default = ASPEED_DEV_UART12;
amc->i2c_init = ast2700_evb_i2c_init;
+ amc->vbootrom = true;
mc->auto_create_sdcard = true;
mc->default_ram_size = 1 * GiB;
aspeed_machine_class_init_cpus_defaults(mc);
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 12/23] tests/functional/aspeed: Add to test vbootrom for AST2700
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (10 preceding siblings ...)
2025-05-05 9:06 ` [PULL 11/23] hw/arm/aspeed: Add support for loading vbootrom image via "-bios" Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 13/23] docs/system/arm/aspeed: move AST2700 content to new section Cédric Le Goater
` (12 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Add the AST2700 functional test to boot using the vbootrom image
instead of manually loading boot components with -device loader.
The boot ROM binary is now passed via the
-bios option, using the image located in pc-bios/ast27x0_bootrom.bin.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250424075135.3715128-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/test_aarch64_aspeed.py | 26 +++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/tests/functional/test_aarch64_aspeed.py b/tests/functional/test_aarch64_aspeed.py
index 1e1f3f9ecece..d02dc7991c1a 100755
--- a/tests/functional/test_aarch64_aspeed.py
+++ b/tests/functional/test_aarch64_aspeed.py
@@ -25,6 +25,18 @@ def do_test_aarch64_aspeed_sdk_start(self, image):
self.vm.launch()
+ def verify_vbootrom_firmware_flow(self):
+ wait_for_console_pattern(self, 'Found valid FIT image')
+ wait_for_console_pattern(self, '[uboot] loading')
+ wait_for_console_pattern(self, 'done')
+ wait_for_console_pattern(self, '[fdt] loading')
+ wait_for_console_pattern(self, 'done')
+ wait_for_console_pattern(self, '[tee] loading')
+ wait_for_console_pattern(self, 'done')
+ wait_for_console_pattern(self, '[atf] loading')
+ wait_for_console_pattern(self, 'done')
+ wait_for_console_pattern(self, 'Jumping to BL31 (Trusted Firmware-A)')
+
def verify_openbmc_boot_and_login(self, name):
wait_for_console_pattern(self, 'U-Boot 2023.10')
wait_for_console_pattern(self, '## Loading kernel from FIT Image')
@@ -94,6 +106,11 @@ def start_ast2700_test(self, name):
self.do_test_aarch64_aspeed_sdk_start(
self.scratch_file(name, 'image-bmc'))
+ def start_ast2700_test_vbootrom(self, name):
+ self.vm.add_args('-bios', 'ast27x0_bootrom.bin')
+ self.do_test_aarch64_aspeed_sdk_start(
+ self.scratch_file(name, 'image-bmc'))
+
def test_aarch64_ast2700_evb_sdk_v09_06(self):
self.set_machine('ast2700-evb')
@@ -110,5 +127,14 @@ def test_aarch64_ast2700a1_evb_sdk_v09_06(self):
self.verify_openbmc_boot_and_login('ast2700-default')
self.do_ast2700_i2c_test()
+ def test_aarch64_ast2700a1_evb_sdk_vbootrom_v09_06(self):
+ self.set_machine('ast2700a1-evb')
+
+ self.archive_extract(self.ASSET_SDK_V906_AST2700A1)
+ self.start_ast2700_test_vbootrom('ast2700-default')
+ self.verify_vbootrom_firmware_flow()
+ self.verify_openbmc_boot_and_login('ast2700-default')
+ self.do_ast2700_i2c_test()
+
if __name__ == '__main__':
QemuSystemTest.main()
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 13/23] docs/system/arm/aspeed: move AST2700 content to new section
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (11 preceding siblings ...)
2025-05-05 9:06 ` [PULL 12/23] tests/functional/aspeed: Add to test vbootrom for AST2700 Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 14/23] docs/system/arm/aspeed: Support vbootrom for AST2700 Cédric Le Goater
` (11 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Moved AST2700-related content from the general Aspeed board list into a
dedicated section for Aspeed 2700 family boards. Improves clarity and
readability.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250424075135.3715128-6-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
docs/system/arm/aspeed.rst | 70 ++++++++++++++++++++++++++++++++++----
1 file changed, 63 insertions(+), 7 deletions(-)
diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst
index 97fd6a0e7fbd..08a33b7008b7 100644
--- a/docs/system/arm/aspeed.rst
+++ b/docs/system/arm/aspeed.rst
@@ -1,12 +1,11 @@
-Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
+Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
==================================================================================================================================================================================================================================================================================================================================================================================================================
The QEMU Aspeed machines model BMCs of various OpenPOWER systems and
Aspeed evaluation boards. They are based on different releases of the
Aspeed SoC : the AST2400 integrating an ARM926EJ-S CPU (400MHz), the
AST2500 with an ARM1176JZS CPU (800MHz), the AST2600
-with dual cores ARM Cortex-A7 CPUs (1.2GHz) and more recently the AST2700
-with quad cores ARM Cortex-A35 64 bits CPUs (1.6GHz)
+with dual cores ARM Cortex-A7 CPUs (1.2GHz).
The SoC comes with RAM, Gigabit ethernet, USB, SD/MMC, USB, SPI, I2C,
etc.
@@ -39,10 +38,6 @@ AST2600 SoC based machines :
- ``qcom-dc-scm-v1-bmc`` Qualcomm DC-SCM V1 BMC
- ``qcom-firework-bmc`` Qualcomm Firework BMC
-AST2700 SoC based machines :
-
-- ``ast2700-evb`` Aspeed AST2700 Evaluation board (Cortex-A35)
-
Supported devices
-----------------
@@ -247,6 +242,67 @@ under Linux), use :
-M ast2500-evb,bmc-console=uart3
+Aspeed 2700 family boards (``ast2700-evb``)
+==================================================================
+
+The QEMU Aspeed machines model BMCs of Aspeed evaluation boards.
+They are based on different releases of the Aspeed SoC :
+the AST2700 with quad cores ARM Cortex-A35 64 bits CPUs (1.6GHz).
+
+The SoC comes with RAM, Gigabit ethernet, USB, SD/MMC, USB, SPI, I2C,
+etc.
+
+AST2700 SoC based machines :
+
+- ``ast2700-evb`` Aspeed AST2700 Evaluation board (Cortex-A35)
+
+Supported devices
+-----------------
+ * Interrupt Controller
+ * Timer Controller
+ * RTC Controller
+ * I2C Controller
+ * System Control Unit (SCU)
+ * SRAM mapping
+ * X-DMA Controller (basic interface)
+ * Static Memory Controller (SMC or FMC) - Only SPI Flash support
+ * SPI Memory Controller
+ * USB 2.0 Controller
+ * SD/MMC storage controllers
+ * SDRAM controller (dummy interface for basic settings and training)
+ * Watchdog Controller
+ * GPIO Controller (Master only)
+ * UART
+ * Ethernet controllers
+ * Front LEDs (PCA9552 on I2C bus)
+ * LPC Peripheral Controller (a subset of subdevices are supported)
+ * Hash/Crypto Engine (HACE) - Hash support only. TODO: Crypto
+ * ADC
+ * eMMC Boot Controller (dummy)
+ * PECI Controller (minimal)
+ * I3C Controller
+ * Internal Bridge Controller (SLI dummy)
+
+Missing devices
+---------------
+ * Coprocessor support
+ * PWM and Fan Controller
+ * Slave GPIO Controller
+ * Super I/O Controller
+ * PCI-Express 1 Controller
+ * Graphic Display Controller
+ * MCTP Controller
+ * Mailbox Controller
+ * Virtual UART
+ * eSPI Controller
+
+Boot options
+------------
+
+Images can be downloaded from the ASPEED Forked OpenBMC GitHub release repository :
+
+ https://github.com/AspeedTech-BMC/openbmc/releases
+
Booting the ast2700-evb machine
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 14/23] docs/system/arm/aspeed: Support vbootrom for AST2700
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (12 preceding siblings ...)
2025-05-05 9:06 ` [PULL 13/23] docs/system/arm/aspeed: move AST2700 content to new section Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 15/23] aspeed: ast27x0: Map unimplemented devices in SoC memory Cédric Le Goater
` (10 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Nabih Estefan, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Using the vbootrom image support and the boot ROM binary is
now passed via the -bios option, using the image located in
pc-bios/ast27x0_bootrom.bin.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250424075135.3715128-7-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
docs/system/arm/aspeed.rst | 29 ++++++++++++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst
index 08a33b7008b7..014545f4440f 100644
--- a/docs/system/arm/aspeed.rst
+++ b/docs/system/arm/aspeed.rst
@@ -306,7 +306,14 @@ Images can be downloaded from the ASPEED Forked OpenBMC GitHub release repositor
Booting the ast2700-evb machine
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Boot the AST2700 machine from the flash image, use an MTD drive :
+Boot the AST2700 machine from the flash image.
+
+There are two supported methods for booting the AST2700 machine with a flash image:
+
+Manual boot using ``-device loader``:
+
+It causes all 4 CPU cores to start execution from address ``0x430000000``, which
+corresponds to the BL31 image load address.
.. code-block:: bash
@@ -326,6 +333,26 @@ Boot the AST2700 machine from the flash image, use an MTD drive :
-drive file=${IMGDIR}/image-bmc,format=raw,if=mtd \
-nographic
+Boot using a virtual boot ROM (``-bios``):
+
+If users do not specify the ``-bios option``, QEMU will attempt to load the
+default vbootrom image ``ast27x0_bootrom.bin`` from either the current working
+directory or the ``pc-bios`` directory within the QEMU source tree.
+
+.. code-block:: bash
+
+ $ qemu-system-aarch64 -M ast2700-evb \
+ -drive file=image-bmc,format=raw,if=mtd \
+ -nographic
+
+The ``-bios`` option allows users to specify a custom path for the vbootrom
+image to be loaded during boot. This will load the vbootrom image from the
+specified path in the ${HOME} directory.
+
+.. code-block:: bash
+
+ -bios ${HOME}/ast27x0_bootrom.bin
+
Aspeed minibmc family boards (``ast1030-evb``)
==================================================================
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 15/23] aspeed: ast27x0: Map unimplemented devices in SoC memory
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (13 preceding siblings ...)
2025-05-05 9:06 ` [PULL 14/23] docs/system/arm/aspeed: Support vbootrom for AST2700 Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 16/23] aspeed: ast27x0: Correct hex notation for device addresses Cédric Le Goater
` (9 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Steven Lee, Cédric Le Goater
From: Steven Lee <steven_lee@aspeedtech.com>
Maps following unimplemented devices in SoC memory
- dpmcu
- iomem
- iomem0
- iomem1
- ltpi
Iomem, Iomem0 and Iomem1 include unimplemented controllers in the memory ranges 0x0 - 0x1000000, 0x120000000 - 0x121000000 and
0x14000000 - 0x141000000.
For instance:
- USB hub at 0x12010000
- eSPI at 0x14C5000
- PWM at 0x140C0000
DPMCU stands for Display Port MCU controller. LTPI is used to connect to AST1700.
AST1700 is an I/O expander that supports the DC-SCM 2.1 LTPI protocol.
It provides AST2700 with additional GPIO, UART, I3C, and other interfaces.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: Iae4db49a4818af3e2c43c16a27fc76329d2405d6
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-2-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/arm/aspeed_soc.h | 6 +++++
hw/arm/aspeed_ast27x0.c | 52 ++++++++++++++++++++++++++++++++-----
2 files changed, 51 insertions(+), 7 deletions(-)
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index 4dcb1010dc28..5fcfd2fe2e62 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -91,6 +91,8 @@ struct AspeedSoCState {
SerialMM uart[ASPEED_UARTS_NUM];
Clock *sysclk;
UnimplementedDeviceState iomem;
+ UnimplementedDeviceState iomem0;
+ UnimplementedDeviceState iomem1;
UnimplementedDeviceState video;
UnimplementedDeviceState emmc_boot_controller;
UnimplementedDeviceState dpmcu;
@@ -98,6 +100,7 @@ struct AspeedSoCState {
UnimplementedDeviceState espi;
UnimplementedDeviceState udc;
UnimplementedDeviceState sgpiom;
+ UnimplementedDeviceState ltpi;
UnimplementedDeviceState jtag[ASPEED_JTAG_NUM];
AspeedAPB2OPBState fsi[2];
};
@@ -173,6 +176,9 @@ enum {
ASPEED_DEV_VBOOTROM,
ASPEED_DEV_SPI_BOOT,
ASPEED_DEV_IOMEM,
+ ASPEED_DEV_IOMEM0,
+ ASPEED_DEV_IOMEM1,
+ ASPEED_DEV_LTPI,
ASPEED_DEV_UART0,
ASPEED_DEV_UART1,
ASPEED_DEV_UART2,
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index a289e65e495d..21769669df27 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -23,9 +23,17 @@
#include "qobject/qlist.h"
#include "qemu/log.h"
+#define AST2700_SOC_IO_SIZE 0x01000000
+#define AST2700_SOC_IOMEM_SIZE 0x01000000
+#define AST2700_SOC_DPMCU_SIZE 0x00040000
+#define AST2700_SOC_LTPI_SIZE 0x01000000
+
static const hwaddr aspeed_soc_ast2700_memmap[] = {
+ [ASPEED_DEV_IOMEM] = 0x00000000,
[ASPEED_DEV_VBOOTROM] = 0x00000000,
[ASPEED_DEV_SRAM] = 0x10000000,
+ [ASPEED_DEV_DPMCU] = 0x11000000,
+ [ASPEED_DEV_IOMEM0] = 0x12000000,
[ASPEED_DEV_EHCI1] = 0x12061000,
[ASPEED_DEV_EHCI2] = 0x12063000,
[ASPEED_DEV_HACE] = 0x12070000,
@@ -39,6 +47,7 @@ static const hwaddr aspeed_soc_ast2700_memmap[] = {
[ASPEED_DEV_TIMER1] = 0x12C10000,
[ASPEED_DEV_SLI] = 0x12C17000,
[ASPEED_DEV_UART4] = 0X12C1A000,
+ [ASPEED_DEV_IOMEM1] = 0x14000000,
[ASPEED_DEV_FMC] = 0x14000000,
[ASPEED_DEV_SPI0] = 0x14010000,
[ASPEED_DEV_SPI1] = 0x14020000,
@@ -73,6 +82,7 @@ static const hwaddr aspeed_soc_ast2700_memmap[] = {
[ASPEED_DEV_UART12] = 0X14C33B00,
[ASPEED_DEV_WDT] = 0x14C37000,
[ASPEED_DEV_SPI_BOOT] = 0x100000000,
+ [ASPEED_DEV_LTPI] = 0x300000000,
[ASPEED_DEV_SDRAM] = 0x400000000,
};
@@ -507,6 +517,16 @@ static void aspeed_soc_ast2700_init(Object *obj)
snprintf(typename, sizeof(typename), "aspeed.hace-%s", socname);
object_initialize_child(obj, "hace", &s->hace, typename);
+ object_initialize_child(obj, "dpmcu", &s->dpmcu,
+ TYPE_UNIMPLEMENTED_DEVICE);
+ object_initialize_child(obj, "ltpi", &s->ltpi,
+ TYPE_UNIMPLEMENTED_DEVICE);
+ object_initialize_child(obj, "iomem", &s->iomem,
+ TYPE_UNIMPLEMENTED_DEVICE);
+ object_initialize_child(obj, "iomem0", &s->iomem0,
+ TYPE_UNIMPLEMENTED_DEVICE);
+ object_initialize_child(obj, "iomem1", &s->iomem1,
+ TYPE_UNIMPLEMENTED_DEVICE);
}
/*
@@ -542,8 +562,11 @@ static bool aspeed_soc_ast2700_gic_realize(DeviceState *dev, Error **errp)
if (!sysbus_realize(gicbusdev, errp)) {
return false;
}
- sysbus_mmio_map(gicbusdev, 0, sc->memmap[ASPEED_GIC_DIST]);
- sysbus_mmio_map(gicbusdev, 1, sc->memmap[ASPEED_GIC_REDIST]);
+
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&a->gic), 0,
+ sc->memmap[ASPEED_GIC_DIST]);
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&a->gic), 1,
+ sc->memmap[ASPEED_GIC_REDIST]);
for (i = 0; i < sc->num_cpus; i++) {
DeviceState *cpudev = DEVICE(&a->cpu[i]);
@@ -911,11 +934,26 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->hace), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_HACE));
- create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
- create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
- create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
- create_unimplemented_device("ast2700.ltpi", 0x30000000, 0x1000000);
- create_unimplemented_device("ast2700.io", 0x0, 0x4000000);
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->dpmcu),
+ "aspeed.dpmcu",
+ sc->memmap[ASPEED_DEV_DPMCU],
+ AST2700_SOC_DPMCU_SIZE);
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->ltpi),
+ "aspeed.ltpi",
+ sc->memmap[ASPEED_DEV_LTPI],
+ AST2700_SOC_LTPI_SIZE);
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem),
+ "aspeed.io",
+ sc->memmap[ASPEED_DEV_IOMEM],
+ AST2700_SOC_IO_SIZE);
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem0),
+ "aspeed.iomem0",
+ sc->memmap[ASPEED_DEV_IOMEM0],
+ AST2700_SOC_IOMEM_SIZE);
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem1),
+ "aspeed.iomem1",
+ sc->memmap[ASPEED_DEV_IOMEM1],
+ AST2700_SOC_IOMEM_SIZE);
}
static void aspeed_soc_ast2700a0_class_init(ObjectClass *oc, const void *data)
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 16/23] aspeed: ast27x0: Correct hex notation for device addresses
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (14 preceding siblings ...)
2025-05-05 9:06 ` [PULL 15/23] aspeed: ast27x0: Map unimplemented devices in SoC memory Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 17/23] hw/intc/aspeed: Add support for AST2700 SSP INTC Cédric Le Goater
` (8 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Steven Lee, Cédric Le Goater
From: Steven Lee <steven_lee@aspeedtech.com>
Corrected the hexadecimal notation for several device addresses in the
aspeed_soc_ast2700_memmap array by changing the uppercase 'X' to
lowercase 'x'.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I45426e18ea8e68d7ccdf9b60c4ea235c4da33cc3
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-3-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/arm/aspeed_ast27x0.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 21769669df27..1974a257660c 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -46,7 +46,7 @@ static const hwaddr aspeed_soc_ast2700_memmap[] = {
[ASPEED_DEV_RTC] = 0x12C0F000,
[ASPEED_DEV_TIMER1] = 0x12C10000,
[ASPEED_DEV_SLI] = 0x12C17000,
- [ASPEED_DEV_UART4] = 0X12C1A000,
+ [ASPEED_DEV_UART4] = 0x12C1A000,
[ASPEED_DEV_IOMEM1] = 0x14000000,
[ASPEED_DEV_FMC] = 0x14000000,
[ASPEED_DEV_SPI0] = 0x14010000,
@@ -67,19 +67,19 @@ static const hwaddr aspeed_soc_ast2700_memmap[] = {
[ASPEED_DEV_I2C] = 0x14C0F000,
[ASPEED_DEV_INTCIO] = 0x14C18000,
[ASPEED_DEV_SLIIO] = 0x14C1E000,
- [ASPEED_DEV_VUART] = 0X14C30000,
- [ASPEED_DEV_UART0] = 0X14C33000,
- [ASPEED_DEV_UART1] = 0X14C33100,
- [ASPEED_DEV_UART2] = 0X14C33200,
- [ASPEED_DEV_UART3] = 0X14C33300,
- [ASPEED_DEV_UART5] = 0X14C33400,
- [ASPEED_DEV_UART6] = 0X14C33500,
- [ASPEED_DEV_UART7] = 0X14C33600,
- [ASPEED_DEV_UART8] = 0X14C33700,
- [ASPEED_DEV_UART9] = 0X14C33800,
- [ASPEED_DEV_UART10] = 0X14C33900,
- [ASPEED_DEV_UART11] = 0X14C33A00,
- [ASPEED_DEV_UART12] = 0X14C33B00,
+ [ASPEED_DEV_VUART] = 0x14C30000,
+ [ASPEED_DEV_UART0] = 0x14C33000,
+ [ASPEED_DEV_UART1] = 0x14C33100,
+ [ASPEED_DEV_UART2] = 0x14C33200,
+ [ASPEED_DEV_UART3] = 0x14C33300,
+ [ASPEED_DEV_UART5] = 0x14C33400,
+ [ASPEED_DEV_UART6] = 0x14C33500,
+ [ASPEED_DEV_UART7] = 0x14C33600,
+ [ASPEED_DEV_UART8] = 0x14C33700,
+ [ASPEED_DEV_UART9] = 0x14C33800,
+ [ASPEED_DEV_UART10] = 0x14C33900,
+ [ASPEED_DEV_UART11] = 0x14C33A00,
+ [ASPEED_DEV_UART12] = 0x14C33B00,
[ASPEED_DEV_WDT] = 0x14C37000,
[ASPEED_DEV_SPI_BOOT] = 0x100000000,
[ASPEED_DEV_LTPI] = 0x300000000,
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 17/23] hw/intc/aspeed: Add support for AST2700 SSP INTC
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (15 preceding siblings ...)
2025-05-05 9:06 ` [PULL 16/23] aspeed: ast27x0: Correct hex notation for device addresses Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 18/23] hw/intc/aspeed: Add support for AST2700 TSP INTC Cédric Le Goater
` (7 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Steven Lee, Cédric Le Goater
From: Steven Lee <steven_lee@aspeedtech.com>
- Define new types for ast2700ssp INTC and INTCIO
- Add register definitions for SSP INTC and INTCIO
- Implement write handlers for SSP INTC and INTCIO
- Register new types in aspeed_intc_register_types
The design of the SSP INTC and INTCIO controllers is similar to
AST2700, with the following differences:
- AST2700
Support GICINT128 to GICINT136 in INTC
The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-ssp
Support SSPINT128 to SSPINT136 in INTC
The INTCIO SSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> SSPINT 160
Bit 1 -> SSPINT 161
Bit 2 -> SSPINT 162
Bit 3 -> SSPINT 163
Bit 4 -> SSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: Ib8cb0e264505cef48e17f173e057f3b2d1ea35c4
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-4-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/intc/aspeed_intc.h | 3 +
hw/intc/aspeed_intc.c | 211 ++++++++++++++++++++++++++++++++++
2 files changed, 214 insertions(+)
diff --git a/include/hw/intc/aspeed_intc.h b/include/hw/intc/aspeed_intc.h
index 3727ba24be72..746f159bf335 100644
--- a/include/hw/intc/aspeed_intc.h
+++ b/include/hw/intc/aspeed_intc.h
@@ -15,6 +15,9 @@
#define TYPE_ASPEED_INTC "aspeed.intc"
#define TYPE_ASPEED_2700_INTC TYPE_ASPEED_INTC "-ast2700"
#define TYPE_ASPEED_2700_INTCIO TYPE_ASPEED_INTC "io-ast2700"
+#define TYPE_ASPEED_2700SSP_INTC TYPE_ASPEED_INTC "-ast2700ssp"
+#define TYPE_ASPEED_2700SSP_INTCIO TYPE_ASPEED_INTC "io-ast2700ssp"
+
OBJECT_DECLARE_TYPE(AspeedINTCState, AspeedINTCClass, ASPEED_INTC)
#define ASPEED_INTC_MAX_INPINS 10
diff --git a/hw/intc/aspeed_intc.c b/hw/intc/aspeed_intc.c
index be7f516a3b1b..e889246951f7 100644
--- a/hw/intc/aspeed_intc.c
+++ b/hw/intc/aspeed_intc.c
@@ -62,6 +62,50 @@ REG32(GICINT196_STATUS, 0x44)
REG32(GICINT197_EN, 0x50)
REG32(GICINT197_STATUS, 0x54)
+/*
+ * SSP INTC Registers
+ */
+REG32(SSPINT128_EN, 0x2000)
+REG32(SSPINT128_STATUS, 0x2004)
+REG32(SSPINT129_EN, 0x2100)
+REG32(SSPINT129_STATUS, 0x2104)
+REG32(SSPINT130_EN, 0x2200)
+REG32(SSPINT130_STATUS, 0x2204)
+REG32(SSPINT131_EN, 0x2300)
+REG32(SSPINT131_STATUS, 0x2304)
+REG32(SSPINT132_EN, 0x2400)
+REG32(SSPINT132_STATUS, 0x2404)
+REG32(SSPINT133_EN, 0x2500)
+REG32(SSPINT133_STATUS, 0x2504)
+REG32(SSPINT134_EN, 0x2600)
+REG32(SSPINT134_STATUS, 0x2604)
+REG32(SSPINT135_EN, 0x2700)
+REG32(SSPINT135_STATUS, 0x2704)
+REG32(SSPINT136_EN, 0x2800)
+REG32(SSPINT136_STATUS, 0x2804)
+REG32(SSPINT137_EN, 0x2900)
+REG32(SSPINT137_STATUS, 0x2904)
+REG32(SSPINT138_EN, 0x2A00)
+REG32(SSPINT138_STATUS, 0x2A04)
+REG32(SSPINT160_169_EN, 0x2B00)
+REG32(SSPINT160_169_STATUS, 0x2B04)
+
+/*
+ * SSP INTCIO Registers
+ */
+REG32(SSPINT160_EN, 0x180)
+REG32(SSPINT160_STATUS, 0x184)
+REG32(SSPINT161_EN, 0x190)
+REG32(SSPINT161_STATUS, 0x194)
+REG32(SSPINT162_EN, 0x1A0)
+REG32(SSPINT162_STATUS, 0x1A4)
+REG32(SSPINT163_EN, 0x1B0)
+REG32(SSPINT163_STATUS, 0x1B4)
+REG32(SSPINT164_EN, 0x1C0)
+REG32(SSPINT164_STATUS, 0x1C4)
+REG32(SSPINT165_EN, 0x1D0)
+REG32(SSPINT165_STATUS, 0x1D4)
+
static const AspeedINTCIRQ *aspeed_intc_get_irq(AspeedINTCClass *aic,
uint32_t reg)
{
@@ -450,6 +494,50 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
}
}
+static void aspeed_ssp_intc_write(void *opaque, hwaddr offset, uint64_t data,
+ unsigned size)
+{
+ AspeedINTCState *s = ASPEED_INTC(opaque);
+ const char *name = object_get_typename(OBJECT(s));
+ uint32_t reg = offset >> 2;
+
+ trace_aspeed_intc_write(name, offset, size, data);
+
+ switch (reg) {
+ case R_SSPINT128_EN:
+ case R_SSPINT129_EN:
+ case R_SSPINT130_EN:
+ case R_SSPINT131_EN:
+ case R_SSPINT132_EN:
+ case R_SSPINT133_EN:
+ case R_SSPINT134_EN:
+ case R_SSPINT135_EN:
+ case R_SSPINT136_EN:
+ case R_SSPINT160_169_EN:
+ aspeed_intc_enable_handler(s, offset, data);
+ break;
+ case R_SSPINT128_STATUS:
+ case R_SSPINT129_STATUS:
+ case R_SSPINT130_STATUS:
+ case R_SSPINT131_STATUS:
+ case R_SSPINT132_STATUS:
+ case R_SSPINT133_STATUS:
+ case R_SSPINT134_STATUS:
+ case R_SSPINT135_STATUS:
+ case R_SSPINT136_STATUS:
+ aspeed_intc_status_handler(s, offset, data);
+ break;
+ case R_SSPINT160_169_STATUS:
+ aspeed_intc_status_handler_multi_outpins(s, offset, data);
+ break;
+ default:
+ s->regs[reg] = data;
+ break;
+ }
+
+ return;
+}
+
static uint64_t aspeed_intcio_read(void *opaque, hwaddr offset,
unsigned int size)
{
@@ -496,6 +584,39 @@ static void aspeed_intcio_write(void *opaque, hwaddr offset, uint64_t data,
}
}
+static void aspeed_ssp_intcio_write(void *opaque, hwaddr offset, uint64_t data,
+ unsigned size)
+{
+ AspeedINTCState *s = ASPEED_INTC(opaque);
+ const char *name = object_get_typename(OBJECT(s));
+ uint32_t reg = offset >> 2;
+
+ trace_aspeed_intc_write(name, offset, size, data);
+
+ switch (reg) {
+ case R_SSPINT160_EN:
+ case R_SSPINT161_EN:
+ case R_SSPINT162_EN:
+ case R_SSPINT163_EN:
+ case R_SSPINT164_EN:
+ case R_SSPINT165_EN:
+ aspeed_intc_enable_handler(s, offset, data);
+ break;
+ case R_SSPINT160_STATUS:
+ case R_SSPINT161_STATUS:
+ case R_SSPINT162_STATUS:
+ case R_SSPINT163_STATUS:
+ case R_SSPINT164_STATUS:
+ case R_SSPINT165_STATUS:
+ aspeed_intc_status_handler(s, offset, data);
+ break;
+ default:
+ s->regs[reg] = data;
+ break;
+ }
+
+ return;
+}
static const MemoryRegionOps aspeed_intc_ops = {
.read = aspeed_intc_read,
@@ -517,6 +638,26 @@ static const MemoryRegionOps aspeed_intcio_ops = {
}
};
+static const MemoryRegionOps aspeed_ssp_intc_ops = {
+ .read = aspeed_intc_read,
+ .write = aspeed_ssp_intc_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ }
+};
+
+static const MemoryRegionOps aspeed_ssp_intcio_ops = {
+ .read = aspeed_intcio_read,
+ .write = aspeed_ssp_intcio_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ }
+};
+
static void aspeed_intc_instance_init(Object *obj)
{
AspeedINTCState *s = ASPEED_INTC(obj);
@@ -674,11 +815,81 @@ static const TypeInfo aspeed_2700_intcio_info = {
.class_init = aspeed_2700_intcio_class_init,
};
+static AspeedINTCIRQ aspeed_2700ssp_intc_irqs[ASPEED_INTC_MAX_INPINS] = {
+ {0, 0, 10, R_SSPINT160_169_EN, R_SSPINT160_169_STATUS},
+ {1, 10, 1, R_SSPINT128_EN, R_SSPINT128_STATUS},
+ {2, 11, 1, R_SSPINT129_EN, R_SSPINT129_STATUS},
+ {3, 12, 1, R_SSPINT130_EN, R_SSPINT130_STATUS},
+ {4, 13, 1, R_SSPINT131_EN, R_SSPINT131_STATUS},
+ {5, 14, 1, R_SSPINT132_EN, R_SSPINT132_STATUS},
+ {6, 15, 1, R_SSPINT133_EN, R_SSPINT133_STATUS},
+ {7, 16, 1, R_SSPINT134_EN, R_SSPINT134_STATUS},
+ {8, 17, 1, R_SSPINT135_EN, R_SSPINT135_STATUS},
+ {9, 18, 1, R_SSPINT136_EN, R_SSPINT136_STATUS},
+};
+
+static void aspeed_2700ssp_intc_class_init(ObjectClass *klass, const void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedINTCClass *aic = ASPEED_INTC_CLASS(klass);
+
+ dc->desc = "ASPEED 2700 SSP INTC Controller";
+ aic->num_lines = 32;
+ aic->num_inpins = 10;
+ aic->num_outpins = 19;
+ aic->mem_size = 0x4000;
+ aic->nr_regs = 0x2B08 >> 2;
+ aic->reg_offset = 0x0;
+ aic->reg_ops = &aspeed_ssp_intc_ops;
+ aic->irq_table = aspeed_2700ssp_intc_irqs;
+ aic->irq_table_count = ARRAY_SIZE(aspeed_2700ssp_intc_irqs);
+}
+
+static const TypeInfo aspeed_2700ssp_intc_info = {
+ .name = TYPE_ASPEED_2700SSP_INTC,
+ .parent = TYPE_ASPEED_INTC,
+ .class_init = aspeed_2700ssp_intc_class_init,
+};
+
+static AspeedINTCIRQ aspeed_2700ssp_intcio_irqs[ASPEED_INTC_MAX_INPINS] = {
+ {0, 0, 1, R_SSPINT160_EN, R_SSPINT160_STATUS},
+ {1, 1, 1, R_SSPINT161_EN, R_SSPINT161_STATUS},
+ {2, 2, 1, R_SSPINT162_EN, R_SSPINT162_STATUS},
+ {3, 3, 1, R_SSPINT163_EN, R_SSPINT163_STATUS},
+ {4, 4, 1, R_SSPINT164_EN, R_SSPINT164_STATUS},
+ {5, 5, 1, R_SSPINT165_EN, R_SSPINT165_STATUS},
+};
+
+static void aspeed_2700ssp_intcio_class_init(ObjectClass *klass, const void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedINTCClass *aic = ASPEED_INTC_CLASS(klass);
+
+ dc->desc = "ASPEED 2700 SSP INTC IO Controller";
+ aic->num_lines = 32;
+ aic->num_inpins = 6;
+ aic->num_outpins = 6;
+ aic->mem_size = 0x400;
+ aic->nr_regs = 0x1d8 >> 2;
+ aic->reg_offset = 0;
+ aic->reg_ops = &aspeed_ssp_intcio_ops;
+ aic->irq_table = aspeed_2700ssp_intcio_irqs;
+ aic->irq_table_count = ARRAY_SIZE(aspeed_2700ssp_intcio_irqs);
+}
+
+static const TypeInfo aspeed_2700ssp_intcio_info = {
+ .name = TYPE_ASPEED_2700SSP_INTCIO,
+ .parent = TYPE_ASPEED_INTC,
+ .class_init = aspeed_2700ssp_intcio_class_init,
+};
+
static void aspeed_intc_register_types(void)
{
type_register_static(&aspeed_intc_info);
type_register_static(&aspeed_2700_intc_info);
type_register_static(&aspeed_2700_intcio_info);
+ type_register_static(&aspeed_2700ssp_intc_info);
+ type_register_static(&aspeed_2700ssp_intcio_info);
}
type_init(aspeed_intc_register_types);
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 18/23] hw/intc/aspeed: Add support for AST2700 TSP INTC
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (16 preceding siblings ...)
2025-05-05 9:06 ` [PULL 17/23] hw/intc/aspeed: Add support for AST2700 SSP INTC Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 19/23] hw/arm/aspeed_ast27x0-ssp: Introduce AST27x0 A1 SSP SoC Cédric Le Goater
` (6 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Steven Lee, Cédric Le Goater
From: Steven Lee <steven_lee@aspeedtech.com>
- Define new types for ast2700tsp INTC and INTCIO
- Add register definitions for TSP INTC and INTCIO
- Implement write handlers for TSP INTC and INTCIO
- Register new types in aspeed_intc_register_types
The design of the TSP INTC and INTCIO controllers is similar to
AST2700, with the following differences:
- AST2700
Support GICINT128 to GICINT136 in INTC
The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-tsp
Support TSPINT128 to TSPINT136 in INTC
The INTCIO TSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> TSPINT 160
Bit 1 -> TSPINT 161
Bit 2 -> TSPINT 162
Bit 3 -> TSPINT 163
Bit 4 -> TSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I3f3aca4b90129640369cf4a92deb4b9a12df5b70
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-5-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/intc/aspeed_intc.h | 2 +
hw/intc/aspeed_intc.c | 209 +++++++++++++++++++++++++++++++++-
2 files changed, 209 insertions(+), 2 deletions(-)
diff --git a/include/hw/intc/aspeed_intc.h b/include/hw/intc/aspeed_intc.h
index 746f159bf335..51288384a569 100644
--- a/include/hw/intc/aspeed_intc.h
+++ b/include/hw/intc/aspeed_intc.h
@@ -17,6 +17,8 @@
#define TYPE_ASPEED_2700_INTCIO TYPE_ASPEED_INTC "io-ast2700"
#define TYPE_ASPEED_2700SSP_INTC TYPE_ASPEED_INTC "-ast2700ssp"
#define TYPE_ASPEED_2700SSP_INTCIO TYPE_ASPEED_INTC "io-ast2700ssp"
+#define TYPE_ASPEED_2700TSP_INTC TYPE_ASPEED_INTC "-ast2700tsp"
+#define TYPE_ASPEED_2700TSP_INTCIO TYPE_ASPEED_INTC "io-ast2700tsp"
OBJECT_DECLARE_TYPE(AspeedINTCState, AspeedINTCClass, ASPEED_INTC)
diff --git a/hw/intc/aspeed_intc.c b/hw/intc/aspeed_intc.c
index e889246951f7..33fcbe729c85 100644
--- a/hw/intc/aspeed_intc.c
+++ b/hw/intc/aspeed_intc.c
@@ -106,6 +106,51 @@ REG32(SSPINT164_STATUS, 0x1C4)
REG32(SSPINT165_EN, 0x1D0)
REG32(SSPINT165_STATUS, 0x1D4)
+/*
+ * TSP INTC Registers
+ */
+REG32(TSPINT128_EN, 0x3000)
+REG32(TSPINT128_STATUS, 0x3004)
+REG32(TSPINT129_EN, 0x3100)
+REG32(TSPINT129_STATUS, 0x3104)
+REG32(TSPINT130_EN, 0x3200)
+REG32(TSPINT130_STATUS, 0x3204)
+REG32(TSPINT131_EN, 0x3300)
+REG32(TSPINT131_STATUS, 0x3304)
+REG32(TSPINT132_EN, 0x3400)
+REG32(TSPINT132_STATUS, 0x3404)
+REG32(TSPINT133_EN, 0x3500)
+REG32(TSPINT133_STATUS, 0x3504)
+REG32(TSPINT134_EN, 0x3600)
+REG32(TSPINT134_STATUS, 0x3604)
+REG32(TSPINT135_EN, 0x3700)
+REG32(TSPINT135_STATUS, 0x3704)
+REG32(TSPINT136_EN, 0x3800)
+REG32(TSPINT136_STATUS, 0x3804)
+REG32(TSPINT137_EN, 0x3900)
+REG32(TSPINT137_STATUS, 0x3904)
+REG32(TSPINT138_EN, 0x3A00)
+REG32(TSPINT138_STATUS, 0x3A04)
+REG32(TSPINT160_169_EN, 0x3B00)
+REG32(TSPINT160_169_STATUS, 0x3B04)
+
+/*
+ * TSP INTCIO Registers
+ */
+
+REG32(TSPINT160_EN, 0x200)
+REG32(TSPINT160_STATUS, 0x204)
+REG32(TSPINT161_EN, 0x210)
+REG32(TSPINT161_STATUS, 0x214)
+REG32(TSPINT162_EN, 0x220)
+REG32(TSPINT162_STATUS, 0x224)
+REG32(TSPINT163_EN, 0x230)
+REG32(TSPINT163_STATUS, 0x234)
+REG32(TSPINT164_EN, 0x240)
+REG32(TSPINT164_STATUS, 0x244)
+REG32(TSPINT165_EN, 0x250)
+REG32(TSPINT165_STATUS, 0x254)
+
static const AspeedINTCIRQ *aspeed_intc_get_irq(AspeedINTCClass *aic,
uint32_t reg)
{
@@ -534,8 +579,48 @@ static void aspeed_ssp_intc_write(void *opaque, hwaddr offset, uint64_t data,
s->regs[reg] = data;
break;
}
+}
+
+static void aspeed_tsp_intc_write(void *opaque, hwaddr offset, uint64_t data,
+ unsigned size)
+{
+ AspeedINTCState *s = ASPEED_INTC(opaque);
+ const char *name = object_get_typename(OBJECT(s));
+ uint32_t reg = offset >> 2;
+
+ trace_aspeed_intc_write(name, offset, size, data);
- return;
+ switch (reg) {
+ case R_TSPINT128_EN:
+ case R_TSPINT129_EN:
+ case R_TSPINT130_EN:
+ case R_TSPINT131_EN:
+ case R_TSPINT132_EN:
+ case R_TSPINT133_EN:
+ case R_TSPINT134_EN:
+ case R_TSPINT135_EN:
+ case R_TSPINT136_EN:
+ case R_TSPINT160_169_EN:
+ aspeed_intc_enable_handler(s, offset, data);
+ break;
+ case R_TSPINT128_STATUS:
+ case R_TSPINT129_STATUS:
+ case R_TSPINT130_STATUS:
+ case R_TSPINT131_STATUS:
+ case R_TSPINT132_STATUS:
+ case R_TSPINT133_STATUS:
+ case R_TSPINT134_STATUS:
+ case R_TSPINT135_STATUS:
+ case R_TSPINT136_STATUS:
+ aspeed_intc_status_handler(s, offset, data);
+ break;
+ case R_TSPINT160_169_STATUS:
+ aspeed_intc_status_handler_multi_outpins(s, offset, data);
+ break;
+ default:
+ s->regs[reg] = data;
+ break;
+ }
}
static uint64_t aspeed_intcio_read(void *opaque, hwaddr offset,
@@ -614,8 +699,38 @@ static void aspeed_ssp_intcio_write(void *opaque, hwaddr offset, uint64_t data,
s->regs[reg] = data;
break;
}
+}
+
+static void aspeed_tsp_intcio_write(void *opaque, hwaddr offset, uint64_t data,
+ unsigned size)
+{
+ AspeedINTCState *s = ASPEED_INTC(opaque);
+ const char *name = object_get_typename(OBJECT(s));
+ uint32_t reg = offset >> 2;
+
+ trace_aspeed_intc_write(name, offset, size, data);
- return;
+ switch (reg) {
+ case R_TSPINT160_EN:
+ case R_TSPINT161_EN:
+ case R_TSPINT162_EN:
+ case R_TSPINT163_EN:
+ case R_TSPINT164_EN:
+ case R_TSPINT165_EN:
+ aspeed_intc_enable_handler(s, offset, data);
+ break;
+ case R_TSPINT160_STATUS:
+ case R_TSPINT161_STATUS:
+ case R_TSPINT162_STATUS:
+ case R_TSPINT163_STATUS:
+ case R_TSPINT164_STATUS:
+ case R_TSPINT165_STATUS:
+ aspeed_intc_status_handler(s, offset, data);
+ break;
+ default:
+ s->regs[reg] = data;
+ break;
+ }
}
static const MemoryRegionOps aspeed_intc_ops = {
@@ -658,6 +773,26 @@ static const MemoryRegionOps aspeed_ssp_intcio_ops = {
}
};
+static const MemoryRegionOps aspeed_tsp_intc_ops = {
+ .read = aspeed_intc_read,
+ .write = aspeed_tsp_intc_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ }
+};
+
+static const MemoryRegionOps aspeed_tsp_intcio_ops = {
+ .read = aspeed_intcio_read,
+ .write = aspeed_tsp_intcio_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ }
+};
+
static void aspeed_intc_instance_init(Object *obj)
{
AspeedINTCState *s = ASPEED_INTC(obj);
@@ -883,6 +1018,74 @@ static const TypeInfo aspeed_2700ssp_intcio_info = {
.class_init = aspeed_2700ssp_intcio_class_init,
};
+static AspeedINTCIRQ aspeed_2700tsp_intc_irqs[ASPEED_INTC_MAX_INPINS] = {
+ {0, 0, 10, R_TSPINT160_169_EN, R_TSPINT160_169_STATUS},
+ {1, 10, 1, R_TSPINT128_EN, R_TSPINT128_STATUS},
+ {2, 11, 1, R_TSPINT129_EN, R_TSPINT129_STATUS},
+ {3, 12, 1, R_TSPINT130_EN, R_TSPINT130_STATUS},
+ {4, 13, 1, R_TSPINT131_EN, R_TSPINT131_STATUS},
+ {5, 14, 1, R_TSPINT132_EN, R_TSPINT132_STATUS},
+ {6, 15, 1, R_TSPINT133_EN, R_TSPINT133_STATUS},
+ {7, 16, 1, R_TSPINT134_EN, R_TSPINT134_STATUS},
+ {8, 17, 1, R_TSPINT135_EN, R_TSPINT135_STATUS},
+ {9, 18, 1, R_TSPINT136_EN, R_TSPINT136_STATUS},
+};
+
+static void aspeed_2700tsp_intc_class_init(ObjectClass *klass, const void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedINTCClass *aic = ASPEED_INTC_CLASS(klass);
+
+ dc->desc = "ASPEED 2700 TSP INTC Controller";
+ aic->num_lines = 32;
+ aic->num_inpins = 10;
+ aic->num_outpins = 19;
+ aic->mem_size = 0x4000;
+ aic->nr_regs = 0x3B08 >> 2;
+ aic->reg_offset = 0;
+ aic->reg_ops = &aspeed_tsp_intc_ops;
+ aic->irq_table = aspeed_2700tsp_intc_irqs;
+ aic->irq_table_count = ARRAY_SIZE(aspeed_2700tsp_intc_irqs);
+}
+
+static const TypeInfo aspeed_2700tsp_intc_info = {
+ .name = TYPE_ASPEED_2700TSP_INTC,
+ .parent = TYPE_ASPEED_INTC,
+ .class_init = aspeed_2700tsp_intc_class_init,
+};
+
+static AspeedINTCIRQ aspeed_2700tsp_intcio_irqs[ASPEED_INTC_MAX_INPINS] = {
+ {0, 0, 1, R_TSPINT160_EN, R_TSPINT160_STATUS},
+ {1, 1, 1, R_TSPINT161_EN, R_TSPINT161_STATUS},
+ {2, 2, 1, R_TSPINT162_EN, R_TSPINT162_STATUS},
+ {3, 3, 1, R_TSPINT163_EN, R_TSPINT163_STATUS},
+ {4, 4, 1, R_TSPINT164_EN, R_TSPINT164_STATUS},
+ {5, 5, 1, R_TSPINT165_EN, R_TSPINT165_STATUS},
+};
+
+static void aspeed_2700tsp_intcio_class_init(ObjectClass *klass, const void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedINTCClass *aic = ASPEED_INTC_CLASS(klass);
+
+ dc->desc = "ASPEED 2700 TSP INTC IO Controller";
+ aic->num_lines = 32;
+ aic->num_inpins = 6;
+ aic->num_outpins = 6;
+ aic->mem_size = 0x400;
+ aic->nr_regs = 0x258 >> 2;
+ aic->reg_offset = 0x0;
+ aic->reg_ops = &aspeed_tsp_intcio_ops;
+ aic->irq_table = aspeed_2700tsp_intcio_irqs;
+ aic->irq_table_count = ARRAY_SIZE(aspeed_2700tsp_intcio_irqs);
+}
+
+static const TypeInfo aspeed_2700tsp_intcio_info = {
+ .name = TYPE_ASPEED_2700TSP_INTCIO,
+ .parent = TYPE_ASPEED_INTC,
+ .class_init = aspeed_2700tsp_intcio_class_init,
+};
+
static void aspeed_intc_register_types(void)
{
type_register_static(&aspeed_intc_info);
@@ -890,6 +1093,8 @@ static void aspeed_intc_register_types(void)
type_register_static(&aspeed_2700_intcio_info);
type_register_static(&aspeed_2700ssp_intc_info);
type_register_static(&aspeed_2700ssp_intcio_info);
+ type_register_static(&aspeed_2700tsp_intc_info);
+ type_register_static(&aspeed_2700tsp_intcio_info);
}
type_init(aspeed_intc_register_types);
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 19/23] hw/arm/aspeed_ast27x0-ssp: Introduce AST27x0 A1 SSP SoC
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (17 preceding siblings ...)
2025-05-05 9:06 ` [PULL 18/23] hw/intc/aspeed: Add support for AST2700 TSP INTC Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 20/23] hw/arm/aspeed_ast27x0-tsp: Introduce AST27x0 A1 TSP SoC Cédric Le Goater
` (5 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Steven Lee, Cédric Le Goater
From: Steven Lee <steven_lee@aspeedtech.com>
The AST2700 SSP (Secondary Service Processor) is a Cortex-M4 coprocessor.
This patch adds support for A1 SSP with the following updates:
- Introduce Aspeed27x0SSPSoCState structure in aspeed_soc.h
- Define memory map and IRQ map for AST27x0 A1 SSP SoC
- Implement initialization and realization functions
- Add support for UART, INTC, and SCU devices
- Map unimplemented devices for IPC and SCUIO
The IRQ mapping is similar to AST2700 CA35 SoC, featuring a two-level
interrupt controller.
Difference from AST2700:
- AST2700
- Support GICINT128 to GICINT136 in INTC
- The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-ssp
- Support SSPINT128 to SSPINT136 in INTC
- The INTCIO SSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> SSPINT 160
Bit 1 -> SSPINT 161
Bit 2 -> SSPINT 162
Bit 3 -> SSPINT 163
Bit 4 -> SSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I924bf1a657f1e83f9e16d6673713f4a06ecdb496
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-6-steven_lee@aspeedtech.com
[ clg: removed local 'Error* err' in aspeed_soc_ast27x0ssp_realize() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/arm/aspeed_soc.h | 14 ++
hw/arm/aspeed_ast27x0-ssp.c | 294 ++++++++++++++++++++++++++++++++++++
hw/arm/meson.build | 1 +
3 files changed, 309 insertions(+)
create mode 100644 hw/arm/aspeed_ast27x0-ssp.c
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index 5fcfd2fe2e62..32be90bc3536 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -146,6 +146,18 @@ struct Aspeed10x0SoCState {
ARMv7MState armv7m;
};
+struct Aspeed27x0SSPSoCState {
+ AspeedSoCState parent;
+ AspeedINTCState intc[2];
+ UnimplementedDeviceState ipc[2];
+ UnimplementedDeviceState scuio;
+
+ ARMv7MState armv7m;
+};
+
+#define TYPE_ASPEED27X0SSP_SOC "aspeed27x0ssp-soc"
+OBJECT_DECLARE_SIMPLE_TYPE(Aspeed27x0SSPSoCState, ASPEED27X0SSP_SOC)
+
#define TYPE_ASPEED10X0_SOC "aspeed10x0-soc"
OBJECT_DECLARE_SIMPLE_TYPE(Aspeed10x0SoCState, ASPEED10X0_SOC)
@@ -259,6 +271,8 @@ enum {
ASPEED_DEV_SLIIO,
ASPEED_GIC_DIST,
ASPEED_GIC_REDIST,
+ ASPEED_DEV_IPC0,
+ ASPEED_DEV_IPC1,
};
qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int dev);
diff --git a/hw/arm/aspeed_ast27x0-ssp.c b/hw/arm/aspeed_ast27x0-ssp.c
new file mode 100644
index 000000000000..80ec5996c1d1
--- /dev/null
+++ b/hw/arm/aspeed_ast27x0-ssp.c
@@ -0,0 +1,294 @@
+/*
+ * ASPEED Ast27x0 SSP SoC
+ *
+ * Copyright (C) 2025 ASPEED Technology Inc.
+ *
+ * This code is licensed under the GPL version 2 or later. See
+ * the COPYING file in the top-level directory.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/qdev-clock.h"
+#include "hw/misc/unimp.h"
+#include "hw/arm/aspeed_soc.h"
+
+#define AST2700_SSP_RAM_SIZE (32 * MiB)
+
+static const hwaddr aspeed_soc_ast27x0ssp_memmap[] = {
+ [ASPEED_DEV_SRAM] = 0x00000000,
+ [ASPEED_DEV_INTC] = 0x72100000,
+ [ASPEED_DEV_SCU] = 0x72C02000,
+ [ASPEED_DEV_SCUIO] = 0x74C02000,
+ [ASPEED_DEV_UART0] = 0x74C33000,
+ [ASPEED_DEV_UART1] = 0x74C33100,
+ [ASPEED_DEV_UART2] = 0x74C33200,
+ [ASPEED_DEV_UART3] = 0x74C33300,
+ [ASPEED_DEV_UART4] = 0x72C1A000,
+ [ASPEED_DEV_INTCIO] = 0x74C18000,
+ [ASPEED_DEV_IPC0] = 0x72C1C000,
+ [ASPEED_DEV_IPC1] = 0x74C39000,
+ [ASPEED_DEV_UART5] = 0x74C33400,
+ [ASPEED_DEV_UART6] = 0x74C33500,
+ [ASPEED_DEV_UART7] = 0x74C33600,
+ [ASPEED_DEV_UART8] = 0x74C33700,
+ [ASPEED_DEV_UART9] = 0x74C33800,
+ [ASPEED_DEV_UART10] = 0x74C33900,
+ [ASPEED_DEV_UART11] = 0x74C33A00,
+ [ASPEED_DEV_UART12] = 0x74C33B00,
+ [ASPEED_DEV_TIMER1] = 0x72C10000,
+};
+
+static const int aspeed_soc_ast27x0ssp_irqmap[] = {
+ [ASPEED_DEV_SCU] = 12,
+ [ASPEED_DEV_UART0] = 164,
+ [ASPEED_DEV_UART1] = 164,
+ [ASPEED_DEV_UART2] = 164,
+ [ASPEED_DEV_UART3] = 164,
+ [ASPEED_DEV_UART4] = 8,
+ [ASPEED_DEV_UART5] = 164,
+ [ASPEED_DEV_UART6] = 164,
+ [ASPEED_DEV_UART7] = 164,
+ [ASPEED_DEV_UART8] = 164,
+ [ASPEED_DEV_UART9] = 164,
+ [ASPEED_DEV_UART10] = 164,
+ [ASPEED_DEV_UART11] = 164,
+ [ASPEED_DEV_UART12] = 164,
+ [ASPEED_DEV_TIMER1] = 16,
+};
+
+/* SSPINT 164 */
+static const int ast2700_ssp132_ssp164_intcmap[] = {
+ [ASPEED_DEV_UART0] = 7,
+ [ASPEED_DEV_UART1] = 8,
+ [ASPEED_DEV_UART2] = 9,
+ [ASPEED_DEV_UART3] = 10,
+ [ASPEED_DEV_UART5] = 11,
+ [ASPEED_DEV_UART6] = 12,
+ [ASPEED_DEV_UART7] = 13,
+ [ASPEED_DEV_UART8] = 14,
+ [ASPEED_DEV_UART9] = 15,
+ [ASPEED_DEV_UART10] = 16,
+ [ASPEED_DEV_UART11] = 17,
+ [ASPEED_DEV_UART12] = 18,
+};
+
+struct nvic_intc_irq_info {
+ int irq;
+ int intc_idx;
+ int orgate_idx;
+ const int *ptr;
+};
+
+static struct nvic_intc_irq_info ast2700_ssp_intcmap[] = {
+ {160, 1, 0, NULL},
+ {161, 1, 1, NULL},
+ {162, 1, 2, NULL},
+ {163, 1, 3, NULL},
+ {164, 1, 4, ast2700_ssp132_ssp164_intcmap},
+ {165, 1, 5, NULL},
+ {166, 1, 6, NULL},
+ {167, 1, 7, NULL},
+ {168, 1, 8, NULL},
+ {169, 1, 9, NULL},
+ {128, 0, 1, NULL},
+ {129, 0, 2, NULL},
+ {130, 0, 3, NULL},
+ {131, 0, 4, NULL},
+ {132, 0, 5, ast2700_ssp132_ssp164_intcmap},
+ {133, 0, 6, NULL},
+ {134, 0, 7, NULL},
+ {135, 0, 8, NULL},
+ {136, 0, 9, NULL},
+};
+
+static qemu_irq aspeed_soc_ast27x0ssp_get_irq(AspeedSoCState *s, int dev)
+{
+ Aspeed27x0SSPSoCState *a = ASPEED27X0SSP_SOC(s);
+ AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+
+ int or_idx;
+ int idx;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ast2700_ssp_intcmap); i++) {
+ if (sc->irqmap[dev] == ast2700_ssp_intcmap[i].irq) {
+ assert(ast2700_ssp_intcmap[i].ptr);
+ or_idx = ast2700_ssp_intcmap[i].orgate_idx;
+ idx = ast2700_ssp_intcmap[i].intc_idx;
+ return qdev_get_gpio_in(DEVICE(&a->intc[idx].orgates[or_idx]),
+ ast2700_ssp_intcmap[i].ptr[dev]);
+ }
+ }
+
+ return qdev_get_gpio_in(DEVICE(&a->armv7m), sc->irqmap[dev]);
+}
+
+static void aspeed_soc_ast27x0ssp_init(Object *obj)
+{
+ Aspeed27x0SSPSoCState *a = ASPEED27X0SSP_SOC(obj);
+ AspeedSoCState *s = ASPEED_SOC(obj);
+ AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+ int i;
+
+ object_initialize_child(obj, "armv7m", &a->armv7m, TYPE_ARMV7M);
+ object_initialize_child(obj, "scu", &s->scu, TYPE_ASPEED_2700_SCU);
+ s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0);
+ qdev_prop_set_uint32(DEVICE(&s->scu), "silicon-rev", sc->silicon_rev);
+
+ for (i = 0; i < sc->uarts_num; i++) {
+ object_initialize_child(obj, "uart[*]", &s->uart[i], TYPE_SERIAL_MM);
+ }
+
+ object_initialize_child(obj, "intc0", &a->intc[0],
+ TYPE_ASPEED_2700SSP_INTC);
+ object_initialize_child(obj, "intc1", &a->intc[1],
+ TYPE_ASPEED_2700SSP_INTCIO);
+
+ object_initialize_child(obj, "timerctrl", &s->timerctrl,
+ TYPE_UNIMPLEMENTED_DEVICE);
+ object_initialize_child(obj, "ipc0", &a->ipc[0],
+ TYPE_UNIMPLEMENTED_DEVICE);
+ object_initialize_child(obj, "ipc1", &a->ipc[1],
+ TYPE_UNIMPLEMENTED_DEVICE);
+ object_initialize_child(obj, "scuio", &a->scuio,
+ TYPE_UNIMPLEMENTED_DEVICE);
+}
+
+static void aspeed_soc_ast27x0ssp_realize(DeviceState *dev_soc, Error **errp)
+{
+ Aspeed27x0SSPSoCState *a = ASPEED27X0SSP_SOC(dev_soc);
+ AspeedSoCState *s = ASPEED_SOC(dev_soc);
+ AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+ DeviceState *armv7m;
+ g_autofree char *sram_name = NULL;
+ int i;
+
+ if (!clock_has_source(s->sysclk)) {
+ error_setg(errp, "sysclk clock must be wired up by the board code");
+ return;
+ }
+
+ /* AST27X0 SSP Core */
+ armv7m = DEVICE(&a->armv7m);
+ qdev_prop_set_uint32(armv7m, "num-irq", 256);
+ qdev_prop_set_string(armv7m, "cpu-type", aspeed_soc_cpu_type(sc));
+ qdev_connect_clock_in(armv7m, "cpuclk", s->sysclk);
+ object_property_set_link(OBJECT(&a->armv7m), "memory",
+ OBJECT(s->memory), &error_abort);
+ sysbus_realize(SYS_BUS_DEVICE(&a->armv7m), &error_abort);
+
+ sram_name = g_strdup_printf("aspeed.dram.%d",
+ CPU(a->armv7m.cpu)->cpu_index);
+
+ if (!memory_region_init_ram(&s->sram, OBJECT(s), sram_name, sc->sram_size,
+ errp)) {
+ return;
+ }
+ memory_region_add_subregion(s->memory,
+ sc->memmap[ASPEED_DEV_SRAM],
+ &s->sram);
+
+ /* SCU */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) {
+ return;
+ }
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->scu), 0, sc->memmap[ASPEED_DEV_SCU]);
+
+ /* INTC */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&a->intc[0]), errp)) {
+ return;
+ }
+
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&a->intc[0]), 0,
+ sc->memmap[ASPEED_DEV_INTC]);
+
+ /* INTCIO */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&a->intc[1]), errp)) {
+ return;
+ }
+
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&a->intc[1]), 0,
+ sc->memmap[ASPEED_DEV_INTCIO]);
+
+ /* irq source orgates -> INTC0 */
+ for (i = 0; i < ASPEED_INTC_GET_CLASS(&a->intc[0])->num_inpins; i++) {
+ qdev_connect_gpio_out(DEVICE(&a->intc[0].orgates[i]), 0,
+ qdev_get_gpio_in(DEVICE(&a->intc[0]), i));
+ }
+ for (i = 0; i < ASPEED_INTC_GET_CLASS(&a->intc[0])->num_outpins; i++) {
+ assert(i < ARRAY_SIZE(ast2700_ssp_intcmap));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&a->intc[0]), i,
+ qdev_get_gpio_in(DEVICE(&a->armv7m),
+ ast2700_ssp_intcmap[i].irq));
+ }
+ /* irq source orgates -> INTCIO */
+ for (i = 0; i < ASPEED_INTC_GET_CLASS(&a->intc[1])->num_inpins; i++) {
+ qdev_connect_gpio_out(DEVICE(&a->intc[1].orgates[i]), 0,
+ qdev_get_gpio_in(DEVICE(&a->intc[1]), i));
+ }
+ /* INTCIO -> INTC */
+ for (i = 0; i < ASPEED_INTC_GET_CLASS(&a->intc[1])->num_outpins; i++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(&a->intc[1]), i,
+ qdev_get_gpio_in(DEVICE(&a->intc[0].orgates[0]), i));
+ }
+ /* UART */
+ if (!aspeed_soc_uart_realize(s, errp)) {
+ return;
+ }
+
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->timerctrl),
+ "aspeed.timerctrl",
+ sc->memmap[ASPEED_DEV_TIMER1], 0x200);
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&a->ipc[0]),
+ "aspeed.ipc0",
+ sc->memmap[ASPEED_DEV_IPC0], 0x1000);
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&a->ipc[1]),
+ "aspeed.ipc1",
+ sc->memmap[ASPEED_DEV_IPC1], 0x1000);
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&a->scuio),
+ "aspeed.scuio",
+ sc->memmap[ASPEED_DEV_SCUIO], 0x1000);
+}
+
+static void aspeed_soc_ast27x0ssp_class_init(ObjectClass *klass, const void *data)
+{
+ static const char * const valid_cpu_types[] = {
+ ARM_CPU_TYPE_NAME("cortex-m4"), /* TODO: cortex-m4f */
+ NULL
+ };
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSoCClass *sc = ASPEED_SOC_CLASS(dc);
+
+ /* Reason: The Aspeed SoC can only be instantiated from a board */
+ dc->user_creatable = false;
+ dc->realize = aspeed_soc_ast27x0ssp_realize;
+
+ sc->valid_cpu_types = valid_cpu_types;
+ sc->silicon_rev = AST2700_A1_SILICON_REV;
+ sc->sram_size = AST2700_SSP_RAM_SIZE;
+ sc->spis_num = 0;
+ sc->ehcis_num = 0;
+ sc->wdts_num = 0;
+ sc->macs_num = 0;
+ sc->uarts_num = 13;
+ sc->uarts_base = ASPEED_DEV_UART0;
+ sc->irqmap = aspeed_soc_ast27x0ssp_irqmap;
+ sc->memmap = aspeed_soc_ast27x0ssp_memmap;
+ sc->num_cpus = 1;
+ sc->get_irq = aspeed_soc_ast27x0ssp_get_irq;
+}
+
+static const TypeInfo aspeed_soc_ast27x0ssp_types[] = {
+ {
+ .name = TYPE_ASPEED27X0SSP_SOC,
+ .parent = TYPE_ASPEED_SOC,
+ .instance_size = sizeof(Aspeed27x0SSPSoCState),
+ .instance_init = aspeed_soc_ast27x0ssp_init,
+ .class_init = aspeed_soc_ast27x0ssp_class_init,
+ },
+};
+
+DEFINE_TYPES(aspeed_soc_ast27x0ssp_types)
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index 09b1cfe5b572..39b74a89ed8e 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -44,6 +44,7 @@ arm_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
'aspeed_soc_common.c',
'aspeed_ast2400.c',
'aspeed_ast2600.c',
+ 'aspeed_ast27x0-ssp.c',
'aspeed_ast10x0.c',
'aspeed_eeprom.c',
'fby35.c'))
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 20/23] hw/arm/aspeed_ast27x0-tsp: Introduce AST27x0 A1 TSP SoC
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (18 preceding siblings ...)
2025-05-05 9:06 ` [PULL 19/23] hw/arm/aspeed_ast27x0-ssp: Introduce AST27x0 A1 SSP SoC Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 21/23] hw/arm: Introduce ASPEED AST2700 A1 full core machine Cédric Le Goater
` (4 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Steven Lee, Cédric Le Goater
From: Steven Lee <steven_lee@aspeedtech.com>
AST2700 TSP(Tertiary Service Processor) is a Cortex-M4 coprocessor
The patch adds support for TSP with following update:
- Introduce Aspeed27x0TSPSoCState structure in aspeed_soc.h
- Implement initialization and realization functions
- Add support for UART, INTC, and SCU devices
- Map unimplemented devices for IPC and SCUIO
- Defined memory map and IRQ maps for AST27x0 A1 TSP SoC
The IRQ mapping is similar to AST2700 CA35 SoC, featuring a two-level
interrupt controller.
Difference from AST2700:
- AST2700
- Support GICINT128 to GICINT136 in INTC
- The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-tsp
- Support TSPINT128 to TSPINT136 in INTC
- The INTCIO TSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> TSPINT 160
Bit 1 -> TSPINT 161
Bit 2 -> TSPINT 162
Bit 3 -> TSPINT 163
Bit 4 -> TSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I69eec2b68b26ef04187b2922c5f2e584b9076c66
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-7-steven_lee@aspeedtech.com
[ clg: removed local 'Error* err' in aspeed_soc_ast27x0tsp_realize() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/arm/aspeed_soc.h | 12 ++
hw/arm/aspeed_ast27x0-tsp.c | 294 ++++++++++++++++++++++++++++++++++++
hw/arm/meson.build | 1 +
3 files changed, 307 insertions(+)
create mode 100644 hw/arm/aspeed_ast27x0-tsp.c
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index 32be90bc3536..217ef0eafd6c 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -158,6 +158,18 @@ struct Aspeed27x0SSPSoCState {
#define TYPE_ASPEED27X0SSP_SOC "aspeed27x0ssp-soc"
OBJECT_DECLARE_SIMPLE_TYPE(Aspeed27x0SSPSoCState, ASPEED27X0SSP_SOC)
+struct Aspeed27x0TSPSoCState {
+ AspeedSoCState parent;
+ AspeedINTCState intc[2];
+ UnimplementedDeviceState ipc[2];
+ UnimplementedDeviceState scuio;
+
+ ARMv7MState armv7m;
+};
+
+#define TYPE_ASPEED27X0TSP_SOC "aspeed27x0tsp-soc"
+OBJECT_DECLARE_SIMPLE_TYPE(Aspeed27x0TSPSoCState, ASPEED27X0TSP_SOC)
+
#define TYPE_ASPEED10X0_SOC "aspeed10x0-soc"
OBJECT_DECLARE_SIMPLE_TYPE(Aspeed10x0SoCState, ASPEED10X0_SOC)
diff --git a/hw/arm/aspeed_ast27x0-tsp.c b/hw/arm/aspeed_ast27x0-tsp.c
new file mode 100644
index 000000000000..4e0efaef07c0
--- /dev/null
+++ b/hw/arm/aspeed_ast27x0-tsp.c
@@ -0,0 +1,294 @@
+/*
+ * ASPEED Ast27x0 TSP SoC
+ *
+ * Copyright (C) 2025 ASPEED Technology Inc.
+ *
+ * This code is licensed under the GPL version 2 or later. See
+ * the COPYING file in the top-level directory.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/qdev-clock.h"
+#include "hw/misc/unimp.h"
+#include "hw/arm/aspeed_soc.h"
+
+#define AST2700_TSP_RAM_SIZE (32 * MiB)
+
+static const hwaddr aspeed_soc_ast27x0tsp_memmap[] = {
+ [ASPEED_DEV_SRAM] = 0x00000000,
+ [ASPEED_DEV_INTC] = 0x72100000,
+ [ASPEED_DEV_SCU] = 0x72C02000,
+ [ASPEED_DEV_SCUIO] = 0x74C02000,
+ [ASPEED_DEV_UART0] = 0x74C33000,
+ [ASPEED_DEV_UART1] = 0x74C33100,
+ [ASPEED_DEV_UART2] = 0x74C33200,
+ [ASPEED_DEV_UART3] = 0x74C33300,
+ [ASPEED_DEV_UART4] = 0x72C1A000,
+ [ASPEED_DEV_INTCIO] = 0x74C18000,
+ [ASPEED_DEV_IPC0] = 0x72C1C000,
+ [ASPEED_DEV_IPC1] = 0x74C39000,
+ [ASPEED_DEV_UART5] = 0x74C33400,
+ [ASPEED_DEV_UART6] = 0x74C33500,
+ [ASPEED_DEV_UART7] = 0x74C33600,
+ [ASPEED_DEV_UART8] = 0x74C33700,
+ [ASPEED_DEV_UART9] = 0x74C33800,
+ [ASPEED_DEV_UART10] = 0x74C33900,
+ [ASPEED_DEV_UART11] = 0x74C33A00,
+ [ASPEED_DEV_UART12] = 0x74C33B00,
+ [ASPEED_DEV_TIMER1] = 0x72C10000,
+};
+
+static const int aspeed_soc_ast27x0tsp_irqmap[] = {
+ [ASPEED_DEV_SCU] = 12,
+ [ASPEED_DEV_UART0] = 164,
+ [ASPEED_DEV_UART1] = 164,
+ [ASPEED_DEV_UART2] = 164,
+ [ASPEED_DEV_UART3] = 164,
+ [ASPEED_DEV_UART4] = 8,
+ [ASPEED_DEV_UART5] = 164,
+ [ASPEED_DEV_UART6] = 164,
+ [ASPEED_DEV_UART7] = 164,
+ [ASPEED_DEV_UART8] = 164,
+ [ASPEED_DEV_UART9] = 164,
+ [ASPEED_DEV_UART10] = 164,
+ [ASPEED_DEV_UART11] = 164,
+ [ASPEED_DEV_UART12] = 164,
+ [ASPEED_DEV_TIMER1] = 16,
+};
+
+/* TSPINT 164 */
+static const int ast2700_tsp132_tsp164_intcmap[] = {
+ [ASPEED_DEV_UART0] = 7,
+ [ASPEED_DEV_UART1] = 8,
+ [ASPEED_DEV_UART2] = 9,
+ [ASPEED_DEV_UART3] = 10,
+ [ASPEED_DEV_UART5] = 11,
+ [ASPEED_DEV_UART6] = 12,
+ [ASPEED_DEV_UART7] = 13,
+ [ASPEED_DEV_UART8] = 14,
+ [ASPEED_DEV_UART9] = 15,
+ [ASPEED_DEV_UART10] = 16,
+ [ASPEED_DEV_UART11] = 17,
+ [ASPEED_DEV_UART12] = 18,
+};
+
+struct nvic_intc_irq_info {
+ int irq;
+ int intc_idx;
+ int orgate_idx;
+ const int *ptr;
+};
+
+static struct nvic_intc_irq_info ast2700_tsp_intcmap[] = {
+ {160, 1, 0, NULL},
+ {161, 1, 1, NULL},
+ {162, 1, 2, NULL},
+ {163, 1, 3, NULL},
+ {164, 1, 4, ast2700_tsp132_tsp164_intcmap},
+ {165, 1, 5, NULL},
+ {166, 1, 6, NULL},
+ {167, 1, 7, NULL},
+ {168, 1, 8, NULL},
+ {169, 1, 9, NULL},
+ {128, 0, 1, NULL},
+ {129, 0, 2, NULL},
+ {130, 0, 3, NULL},
+ {131, 0, 4, NULL},
+ {132, 0, 5, ast2700_tsp132_tsp164_intcmap},
+ {133, 0, 6, NULL},
+ {134, 0, 7, NULL},
+ {135, 0, 8, NULL},
+ {136, 0, 9, NULL},
+};
+
+static qemu_irq aspeed_soc_ast27x0tsp_get_irq(AspeedSoCState *s, int dev)
+{
+ Aspeed27x0TSPSoCState *a = ASPEED27X0TSP_SOC(s);
+ AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+
+ int or_idx;
+ int idx;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ast2700_tsp_intcmap); i++) {
+ if (sc->irqmap[dev] == ast2700_tsp_intcmap[i].irq) {
+ assert(ast2700_tsp_intcmap[i].ptr);
+ or_idx = ast2700_tsp_intcmap[i].orgate_idx;
+ idx = ast2700_tsp_intcmap[i].intc_idx;
+ return qdev_get_gpio_in(DEVICE(&a->intc[idx].orgates[or_idx]),
+ ast2700_tsp_intcmap[i].ptr[dev]);
+ }
+ }
+
+ return qdev_get_gpio_in(DEVICE(&a->armv7m), sc->irqmap[dev]);
+}
+
+static void aspeed_soc_ast27x0tsp_init(Object *obj)
+{
+ Aspeed27x0TSPSoCState *a = ASPEED27X0TSP_SOC(obj);
+ AspeedSoCState *s = ASPEED_SOC(obj);
+ AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+ int i;
+
+ object_initialize_child(obj, "armv7m", &a->armv7m, TYPE_ARMV7M);
+ object_initialize_child(obj, "scu", &s->scu, TYPE_ASPEED_2700_SCU);
+ s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0);
+ qdev_prop_set_uint32(DEVICE(&s->scu), "silicon-rev", sc->silicon_rev);
+
+ for (i = 0; i < sc->uarts_num; i++) {
+ object_initialize_child(obj, "uart[*]", &s->uart[i], TYPE_SERIAL_MM);
+ }
+
+ object_initialize_child(obj, "intc0", &a->intc[0],
+ TYPE_ASPEED_2700TSP_INTC);
+ object_initialize_child(obj, "intc1", &a->intc[1],
+ TYPE_ASPEED_2700TSP_INTCIO);
+
+ object_initialize_child(obj, "timerctrl", &s->timerctrl,
+ TYPE_UNIMPLEMENTED_DEVICE);
+ object_initialize_child(obj, "ipc0", &a->ipc[0],
+ TYPE_UNIMPLEMENTED_DEVICE);
+ object_initialize_child(obj, "ipc1", &a->ipc[1],
+ TYPE_UNIMPLEMENTED_DEVICE);
+ object_initialize_child(obj, "scuio", &a->scuio,
+ TYPE_UNIMPLEMENTED_DEVICE);
+}
+
+static void aspeed_soc_ast27x0tsp_realize(DeviceState *dev_soc, Error **errp)
+{
+ Aspeed27x0TSPSoCState *a = ASPEED27X0TSP_SOC(dev_soc);
+ AspeedSoCState *s = ASPEED_SOC(dev_soc);
+ AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+ DeviceState *armv7m;
+ g_autofree char *sram_name = NULL;
+ int i;
+
+ if (!clock_has_source(s->sysclk)) {
+ error_setg(errp, "sysclk clock must be wired up by the board code");
+ return;
+ }
+
+ /* AST27X0 TSP Core */
+ armv7m = DEVICE(&a->armv7m);
+ qdev_prop_set_uint32(armv7m, "num-irq", 256);
+ qdev_prop_set_string(armv7m, "cpu-type", aspeed_soc_cpu_type(sc));
+ qdev_connect_clock_in(armv7m, "cpuclk", s->sysclk);
+ object_property_set_link(OBJECT(&a->armv7m), "memory",
+ OBJECT(s->memory), &error_abort);
+ sysbus_realize(SYS_BUS_DEVICE(&a->armv7m), &error_abort);
+
+ sram_name = g_strdup_printf("aspeed.dram.%d",
+ CPU(a->armv7m.cpu)->cpu_index);
+
+ if (!memory_region_init_ram(&s->sram, OBJECT(s), sram_name, sc->sram_size,
+ errp)) {
+ return;
+ }
+ memory_region_add_subregion(s->memory,
+ sc->memmap[ASPEED_DEV_SRAM],
+ &s->sram);
+
+ /* SCU */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) {
+ return;
+ }
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->scu), 0, sc->memmap[ASPEED_DEV_SCU]);
+
+ /* INTC */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&a->intc[0]), errp)) {
+ return;
+ }
+
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&a->intc[0]), 0,
+ sc->memmap[ASPEED_DEV_INTC]);
+
+ /* INTCIO */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&a->intc[1]), errp)) {
+ return;
+ }
+
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&a->intc[1]), 0,
+ sc->memmap[ASPEED_DEV_INTCIO]);
+
+ /* irq source orgates -> INTC */
+ for (i = 0; i < ASPEED_INTC_GET_CLASS(&a->intc[0])->num_inpins; i++) {
+ qdev_connect_gpio_out(DEVICE(&a->intc[0].orgates[i]), 0,
+ qdev_get_gpio_in(DEVICE(&a->intc[0]), i));
+ }
+ for (i = 0; i < ASPEED_INTC_GET_CLASS(&a->intc[0])->num_outpins; i++) {
+ assert(i < ARRAY_SIZE(ast2700_tsp_intcmap));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&a->intc[0]), i,
+ qdev_get_gpio_in(DEVICE(&a->armv7m),
+ ast2700_tsp_intcmap[i].irq));
+ }
+ /* irq source orgates -> INTC */
+ for (i = 0; i < ASPEED_INTC_GET_CLASS(&a->intc[1])->num_inpins; i++) {
+ qdev_connect_gpio_out(DEVICE(&a->intc[1].orgates[i]), 0,
+ qdev_get_gpio_in(DEVICE(&a->intc[1]), i));
+ }
+ /* INTCIO -> INTC */
+ for (i = 0; i < ASPEED_INTC_GET_CLASS(&a->intc[1])->num_outpins; i++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(&a->intc[1]), i,
+ qdev_get_gpio_in(DEVICE(&a->intc[0].orgates[0]), i));
+ }
+ /* UART */
+ if (!aspeed_soc_uart_realize(s, errp)) {
+ return;
+ }
+
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->timerctrl),
+ "aspeed.timerctrl",
+ sc->memmap[ASPEED_DEV_TIMER1], 0x200);
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&a->ipc[0]),
+ "aspeed.ipc0",
+ sc->memmap[ASPEED_DEV_IPC0], 0x1000);
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&a->ipc[1]),
+ "aspeed.ipc1",
+ sc->memmap[ASPEED_DEV_IPC1], 0x1000);
+ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&a->scuio),
+ "aspeed.scuio",
+ sc->memmap[ASPEED_DEV_SCUIO], 0x1000);
+}
+
+static void aspeed_soc_ast27x0tsp_class_init(ObjectClass *klass, const void *data)
+{
+ static const char * const valid_cpu_types[] = {
+ ARM_CPU_TYPE_NAME("cortex-m4"), /* TODO cortex-m4f */
+ NULL
+ };
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSoCClass *sc = ASPEED_SOC_CLASS(dc);
+
+ /* Reason: The Aspeed SoC can only be instantiated from a board */
+ dc->user_creatable = false;
+ dc->realize = aspeed_soc_ast27x0tsp_realize;
+
+ sc->valid_cpu_types = valid_cpu_types;
+ sc->silicon_rev = AST2700_A1_SILICON_REV;
+ sc->sram_size = AST2700_TSP_RAM_SIZE;
+ sc->spis_num = 0;
+ sc->ehcis_num = 0;
+ sc->wdts_num = 0;
+ sc->macs_num = 0;
+ sc->uarts_num = 13;
+ sc->uarts_base = ASPEED_DEV_UART0;
+ sc->irqmap = aspeed_soc_ast27x0tsp_irqmap;
+ sc->memmap = aspeed_soc_ast27x0tsp_memmap;
+ sc->num_cpus = 1;
+ sc->get_irq = aspeed_soc_ast27x0tsp_get_irq;
+}
+
+static const TypeInfo aspeed_soc_ast27x0tsp_types[] = {
+ {
+ .name = TYPE_ASPEED27X0TSP_SOC,
+ .parent = TYPE_ASPEED_SOC,
+ .instance_size = sizeof(Aspeed27x0TSPSoCState),
+ .instance_init = aspeed_soc_ast27x0tsp_init,
+ .class_init = aspeed_soc_ast27x0tsp_class_init,
+ },
+};
+
+DEFINE_TYPES(aspeed_soc_ast27x0tsp_types)
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index 39b74a89ed8e..98c563150640 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -45,6 +45,7 @@ arm_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
'aspeed_ast2400.c',
'aspeed_ast2600.c',
'aspeed_ast27x0-ssp.c',
+ 'aspeed_ast27x0-tsp.c',
'aspeed_ast10x0.c',
'aspeed_eeprom.c',
'fby35.c'))
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 21/23] hw/arm: Introduce ASPEED AST2700 A1 full core machine
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (19 preceding siblings ...)
2025-05-05 9:06 ` [PULL 20/23] hw/arm/aspeed_ast27x0-tsp: Introduce AST27x0 A1 TSP SoC Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:06 ` [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc Cédric Le Goater
` (3 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Steven Lee, Cédric Le Goater
From: Steven Lee <steven_lee@aspeedtech.com>
- Added new machine type `ast2700fc` with full core support.
- Defined `Ast2700FCState` structure for the new machine type.
- Implemented initialization functions for CA35, SSP, and TSP components.
- Updated `ast2700fc_types` to include the new machine type.
- Set machine class properties for `ast2700fc`.
Test Step:
- Download ast2700-default-obmc.tar.gz from AspeedTech-BMC OpenBmc
release page.
- Run the following QEMU command:
```
IMGDIR=~/path/to/image
UBOOT_SIZE=$(stat --format=%s -L ${IMGDIR}/u-boot-nodtb.bin)
./qemu-system-aarch64 -machine ast2700fc \
-device loader,force-raw=on,addr=0x400000000,file=${IMGDIR}/u-boot-nodtb.bin \
-device loader,force-raw=on,addr=$((0x400000000 + ${UBOOT_SIZE})),file=${IMGDIR}/u-boot.dtb \
-device loader,force-raw=on,addr=0x430000000,file=${IMGDIR}/bl31.bin \
-device loader,force-raw=on,addr=0x430080000,file=${IMGDIR}/tee-raw.bin \
-device loader,cpu-num=0,addr=0x430000000 \
-device loader,cpu-num=1,addr=0x430000000 \
-device loader,cpu-num=2,addr=0x430000000 \
-device loader,cpu-num=3,addr=0x430000000 \
-device loader,file=${IMGDIR}/ast2700-ssp.elf,cpu-num=4 \
-device loader,file=${IMGDIR}/ast2700-tsp.elf,cpu-num=5 \
-drive file=${IMGDIR}/image-bmc,if=mtd,format=raw \
-serial pty -serial pty -serial pty \
-snapshot \
-S -nographic
```
- After starting QEMU, serial devices will be redirected:
char device redirected to /dev/pts/51 (label serial0)
char device redirected to /dev/pts/52 (label serial1)
char device redirected to /dev/pts/53 (label serial2)
- serial0 is the console for the four Cortex-A35 primary processors,
serial1 and serial2 are the consoles for the two Cortex-M4 coprocessors.
- Connect to the consoles using a terminal emulator.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I32447b9372a78eb53a07135afef59c2a19202328
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-8-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/arm/aspeed_ast27x0-fc.c | 192 +++++++++++++++++++++++++++++++++++++
hw/arm/meson.build | 4 +-
2 files changed, 195 insertions(+), 1 deletion(-)
create mode 100644 hw/arm/aspeed_ast27x0-fc.c
diff --git a/hw/arm/aspeed_ast27x0-fc.c b/hw/arm/aspeed_ast27x0-fc.c
new file mode 100644
index 000000000000..125a3ade4092
--- /dev/null
+++ b/hw/arm/aspeed_ast27x0-fc.c
@@ -0,0 +1,192 @@
+/*
+ * ASPEED SoC 2700 family
+ *
+ * Copyright (C) 2025 ASPEED Technology Inc.
+ *
+ * This code is licensed under the GPL version 2 or later. See
+ * the COPYING file in the top-level directory.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qapi/error.h"
+#include "system/block-backend.h"
+#include "system/system.h"
+#include "hw/arm/aspeed.h"
+#include "hw/boards.h"
+#include "hw/qdev-clock.h"
+#include "hw/arm/aspeed_soc.h"
+#include "hw/loader.h"
+#include "hw/arm/boot.h"
+#include "hw/block/flash.h"
+
+
+#define TYPE_AST2700A1FC MACHINE_TYPE_NAME("ast2700fc")
+OBJECT_DECLARE_SIMPLE_TYPE(Ast2700FCState, AST2700A1FC);
+
+static struct arm_boot_info ast2700fc_board_info = {
+ .board_id = -1, /* device-tree-only board */
+};
+
+struct Ast2700FCState {
+ MachineState parent_obj;
+
+ MemoryRegion ca35_memory;
+ MemoryRegion ca35_dram;
+ MemoryRegion ssp_memory;
+ MemoryRegion tsp_memory;
+
+ Clock *ssp_sysclk;
+ Clock *tsp_sysclk;
+
+ Aspeed27x0SoCState ca35;
+ Aspeed27x0SSPSoCState ssp;
+ Aspeed27x0TSPSoCState tsp;
+
+ bool mmio_exec;
+};
+
+#define AST2700FC_BMC_RAM_SIZE (2 * GiB)
+#define AST2700FC_CM4_DRAM_SIZE (32 * MiB)
+
+#define AST2700FC_HW_STRAP1 0x000000C0
+#define AST2700FC_HW_STRAP2 0x00000003
+#define AST2700FC_FMC_MODEL "w25q01jvq"
+#define AST2700FC_SPI_MODEL "w25q512jv"
+
+static void ast2700fc_ca35_init(MachineState *machine)
+{
+ Ast2700FCState *s = AST2700A1FC(machine);
+ AspeedSoCState *soc;
+ AspeedSoCClass *sc;
+
+ object_initialize_child(OBJECT(s), "ca35", &s->ca35, "ast2700-a1");
+ soc = ASPEED_SOC(&s->ca35);
+ sc = ASPEED_SOC_GET_CLASS(soc);
+
+ memory_region_init(&s->ca35_memory, OBJECT(&s->ca35), "ca35-memory",
+ UINT64_MAX);
+
+ if (!memory_region_init_ram(&s->ca35_dram, OBJECT(&s->ca35), "ca35-dram",
+ AST2700FC_BMC_RAM_SIZE, &error_abort)) {
+ return;
+ }
+ if (!object_property_set_link(OBJECT(&s->ca35), "memory",
+ OBJECT(&s->ca35_memory),
+ &error_abort)) {
+ return;
+ };
+ if (!object_property_set_link(OBJECT(&s->ca35), "dram",
+ OBJECT(&s->ca35_dram), &error_abort)) {
+ return;
+ }
+ if (!object_property_set_int(OBJECT(&s->ca35), "ram-size",
+ AST2700FC_BMC_RAM_SIZE, &error_abort)) {
+ return;
+ }
+ if (!object_property_set_int(OBJECT(&s->ca35), "hw-strap1",
+ AST2700FC_HW_STRAP1, &error_abort)) {
+ return;
+ }
+ if (!object_property_set_int(OBJECT(&s->ca35), "hw-strap2",
+ AST2700FC_HW_STRAP2, &error_abort)) {
+ return;
+ }
+ aspeed_soc_uart_set_chr(soc, ASPEED_DEV_UART12, serial_hd(0));
+ if (!qdev_realize(DEVICE(&s->ca35), NULL, &error_abort)) {
+ return;
+ }
+
+ /*
+ * AST2700 EVB has a LM75 temperature sensor on I2C bus 0 at address 0x4d.
+ */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 0), "tmp105", 0x4d);
+
+ aspeed_board_init_flashes(&soc->fmc, AST2700FC_FMC_MODEL, 2, 0);
+ aspeed_board_init_flashes(&soc->spi[0], AST2700FC_SPI_MODEL, 1, 2);
+
+ ast2700fc_board_info.ram_size = machine->ram_size;
+ ast2700fc_board_info.loader_start = sc->memmap[ASPEED_DEV_SDRAM];
+
+ arm_load_kernel(ARM_CPU(first_cpu), machine, &ast2700fc_board_info);
+}
+
+static void ast2700fc_ssp_init(MachineState *machine)
+{
+ AspeedSoCState *soc;
+ Ast2700FCState *s = AST2700A1FC(machine);
+ s->ssp_sysclk = clock_new(OBJECT(s), "SSP_SYSCLK");
+ clock_set_hz(s->ssp_sysclk, 200000000ULL);
+
+ object_initialize_child(OBJECT(s), "ssp", &s->ssp, TYPE_ASPEED27X0SSP_SOC);
+ memory_region_init(&s->ssp_memory, OBJECT(&s->ssp), "ssp-memory",
+ UINT64_MAX);
+
+ qdev_connect_clock_in(DEVICE(&s->ssp), "sysclk", s->ssp_sysclk);
+ if (!object_property_set_link(OBJECT(&s->ssp), "memory",
+ OBJECT(&s->ssp_memory), &error_abort)) {
+ return;
+ }
+
+ soc = ASPEED_SOC(&s->ssp);
+ aspeed_soc_uart_set_chr(soc, ASPEED_DEV_UART4, serial_hd(1));
+ if (!qdev_realize(DEVICE(&s->ssp), NULL, &error_abort)) {
+ return;
+ }
+}
+
+static void ast2700fc_tsp_init(MachineState *machine)
+{
+ AspeedSoCState *soc;
+ Ast2700FCState *s = AST2700A1FC(machine);
+ s->tsp_sysclk = clock_new(OBJECT(s), "TSP_SYSCLK");
+ clock_set_hz(s->tsp_sysclk, 200000000ULL);
+
+ object_initialize_child(OBJECT(s), "tsp", &s->tsp, TYPE_ASPEED27X0TSP_SOC);
+ memory_region_init(&s->tsp_memory, OBJECT(&s->tsp), "tsp-memory",
+ UINT64_MAX);
+
+ qdev_connect_clock_in(DEVICE(&s->tsp), "sysclk", s->tsp_sysclk);
+ if (!object_property_set_link(OBJECT(&s->tsp), "memory",
+ OBJECT(&s->tsp_memory), &error_abort)) {
+ return;
+ }
+
+ soc = ASPEED_SOC(&s->tsp);
+ aspeed_soc_uart_set_chr(soc, ASPEED_DEV_UART7, serial_hd(2));
+ if (!qdev_realize(DEVICE(&s->tsp), NULL, &error_abort)) {
+ return;
+ }
+}
+
+static void ast2700fc_init(MachineState *machine)
+{
+ ast2700fc_ca35_init(machine);
+ ast2700fc_ssp_init(machine);
+ ast2700fc_tsp_init(machine);
+}
+
+static void ast2700fc_class_init(ObjectClass *oc, const void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+
+ mc->alias = "ast2700fc";
+ mc->desc = "ast2700 full core support";
+ mc->init = ast2700fc_init;
+ mc->no_floppy = 1;
+ mc->no_cdrom = 1;
+ mc->min_cpus = mc->max_cpus = mc->default_cpus = 6;
+}
+
+static const TypeInfo ast2700fc_types[] = {
+ {
+ .name = MACHINE_TYPE_NAME("ast2700fc"),
+ .parent = TYPE_MACHINE,
+ .class_init = ast2700fc_class_init,
+ .instance_size = sizeof(Ast2700FCState),
+ },
+};
+
+DEFINE_TYPES(ast2700fc_types)
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index 98c563150640..5098795f61de 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -49,7 +49,9 @@ arm_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
'aspeed_ast10x0.c',
'aspeed_eeprom.c',
'fby35.c'))
-arm_common_ss.add(when: ['CONFIG_ASPEED_SOC', 'TARGET_AARCH64'], if_true: files('aspeed_ast27x0.c'))
+arm_common_ss.add(when: ['CONFIG_ASPEED_SOC', 'TARGET_AARCH64'], if_true: files(
+ 'aspeed_ast27x0.c',
+ 'aspeed_ast27x0-fc.c',))
arm_common_ss.add(when: 'CONFIG_MPS2', if_true: files('mps2.c'))
arm_common_ss.add(when: 'CONFIG_MPS2', if_true: files('mps2-tz.c'))
arm_common_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-soc.c'))
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (20 preceding siblings ...)
2025-05-05 9:06 ` [PULL 21/23] hw/arm: Introduce ASPEED AST2700 A1 full core machine Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-06 14:22 ` Peter Maydell
2025-05-05 9:06 ` [PULL 23/23] docs: Add support for ast2700fc machine Cédric Le Goater
` (2 subsequent siblings)
24 siblings, 1 reply; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Steven Lee, Cédric Le Goater
From: Steven Lee <steven_lee@aspeedtech.com>
Introduce a new test suite for ast2700fc machine.
Rename the original test_aarch64_aspeed.py to
test_aarch64_aspeed_ast2700.py.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I3855f55c9f6e5cca1270c179445f549f8d81f36c
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250505030618.3612042-1-steven_lee@aspeedtech.com
[ clg: Added new tests in meson.build ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/meson.build | 6 +-
...peed.py => test_aarch64_aspeed_ast2700.py} | 0
.../test_aarch64_aspeed_ast2700fc.py | 135 ++++++++++++++++++
3 files changed, 139 insertions(+), 2 deletions(-)
rename tests/functional/{test_aarch64_aspeed.py => test_aarch64_aspeed_ast2700.py} (100%)
create mode 100755 tests/functional/test_aarch64_aspeed_ast2700fc.py
diff --git a/tests/functional/meson.build b/tests/functional/meson.build
index b317ad42c5a4..ab9df03b1f69 100644
--- a/tests/functional/meson.build
+++ b/tests/functional/meson.build
@@ -11,7 +11,8 @@ endif
# Timeouts for individual tests that can be slow e.g. with debugging enabled
test_timeouts = {
- 'aarch64_aspeed' : 600,
+ 'aarch64_aspeed_ast2700' : 600,
+ 'aarch64_aspeed_ast2700fc' : 600,
'aarch64_raspi4' : 480,
'aarch64_reverse_debug' : 180,
'aarch64_rme_virt' : 1200,
@@ -79,7 +80,8 @@ tests_aarch64_system_quick = [
]
tests_aarch64_system_thorough = [
- 'aarch64_aspeed',
+ 'aarch64_aspeed_ast2700',
+ 'aarch64_aspeed_ast2700fc',
'aarch64_raspi3',
'aarch64_raspi4',
'aarch64_replay',
diff --git a/tests/functional/test_aarch64_aspeed.py b/tests/functional/test_aarch64_aspeed_ast2700.py
similarity index 100%
rename from tests/functional/test_aarch64_aspeed.py
rename to tests/functional/test_aarch64_aspeed_ast2700.py
diff --git a/tests/functional/test_aarch64_aspeed_ast2700fc.py b/tests/functional/test_aarch64_aspeed_ast2700fc.py
new file mode 100755
index 000000000000..b85370e182ea
--- /dev/null
+++ b/tests/functional/test_aarch64_aspeed_ast2700fc.py
@@ -0,0 +1,135 @@
+#!/usr/bin/env python3
+#
+# Functional test that boots the ASPEED SoCs with firmware
+#
+# Copyright (C) 2022 ASPEED Technology Inc
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+import os
+
+from qemu_test import QemuSystemTest, Asset
+from qemu_test import wait_for_console_pattern
+from qemu_test import exec_command_and_wait_for_pattern
+
+
+class AST2x00MachineSDK(QemuSystemTest):
+
+ def do_test_aarch64_aspeed_sdk_start(self, image):
+ self.require_netdev('user')
+ self.vm.set_console()
+ self.vm.add_args('-device',
+ 'tmp105,bus=aspeed.i2c.bus.1,address=0x4d,id=tmp-test')
+ self.vm.add_args('-drive', 'file=' + image + ',if=mtd,format=raw',
+ '-net', 'nic', '-net', 'user', '-snapshot')
+
+ self.vm.launch()
+
+ def verify_openbmc_boot_and_login(self, name):
+ wait_for_console_pattern(self, 'U-Boot 2023.10')
+ wait_for_console_pattern(self, '## Loading kernel from FIT Image')
+ wait_for_console_pattern(self, 'Starting kernel ...')
+
+ wait_for_console_pattern(self, f'{name} login:')
+ exec_command_and_wait_for_pattern(self, 'root', 'Password:')
+ exec_command_and_wait_for_pattern(self, '0penBmc', f'root@{name}:~#')
+
+ ASSET_SDK_V906_AST2700 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v09.06/ast2700-default-obmc.tar.gz',
+ 'f1d53e0be8a404ecce3e105f72bc50fa4e090ad13160ffa91b10a6e0233a9dc6')
+
+ def do_ast2700_i2c_test(self):
+ exec_command_and_wait_for_pattern(self,
+ 'echo lm75 0x4d > /sys/class/i2c-dev/i2c-1/device/new_device ',
+ 'i2c i2c-1: new_device: Instantiated device lm75 at 0x4d')
+ exec_command_and_wait_for_pattern(self,
+ 'cat /sys/bus/i2c/devices/1-004d/hwmon/hwmon*/temp1_input', '0')
+ self.vm.cmd('qom-set', path='/machine/peripheral/tmp-test',
+ property='temperature', value=18000)
+ exec_command_and_wait_for_pattern(self,
+ 'cat /sys/bus/i2c/devices/1-004d/hwmon/hwmon*/temp1_input', '18000')
+
+ def do_ast2700fc_ssp_test(self):
+ self.vm.shutdown()
+ self.vm.set_console(console_index=1)
+ self.vm.launch()
+
+ exec_command_and_wait_for_pattern(self, '\012', 'ssp:~$')
+ exec_command_and_wait_for_pattern(self, 'version',
+ 'Zephyr version 3.7.1')
+ exec_command_and_wait_for_pattern(self, 'md 72c02000 1',
+ '[72c02000] 06010103')
+
+ def do_ast2700fc_tsp_test(self):
+ self.vm.shutdown()
+ self.vm.set_console(console_index=2)
+ self.vm.launch()
+
+ exec_command_and_wait_for_pattern(self, '\012', 'tsp:~$')
+ exec_command_and_wait_for_pattern(self, 'version',
+ 'Zephyr version 3.7.1')
+ exec_command_and_wait_for_pattern(self, 'md 72c02000 1',
+ '[72c02000] 06010103')
+
+ def start_ast2700fc_test(self, name):
+ ca35_core = 4
+ uboot_size = os.path.getsize(self.scratch_file(name,
+ 'u-boot-nodtb.bin'))
+ uboot_dtb_load_addr = hex(0x400000000 + uboot_size)
+
+ load_images_list = [
+ {
+ 'addr': '0x400000000',
+ 'file': self.scratch_file(name,
+ 'u-boot-nodtb.bin')
+ },
+ {
+ 'addr': str(uboot_dtb_load_addr),
+ 'file': self.scratch_file(name, 'u-boot.dtb')
+ },
+ {
+ 'addr': '0x430000000',
+ 'file': self.scratch_file(name, 'bl31.bin')
+ },
+ {
+ 'addr': '0x430080000',
+ 'file': self.scratch_file(name, 'optee',
+ 'tee-raw.bin')
+ }
+ ]
+
+ for load_image in load_images_list:
+ addr = load_image['addr']
+ file = load_image['file']
+ self.vm.add_args('-device',
+ f'loader,force-raw=on,addr={addr},file={file}')
+
+ for i in range(ca35_core):
+ self.vm.add_args('-device',
+ f'loader,addr=0x430000000,cpu-num={i}')
+
+ load_elf_list = {
+ 'ssp': self.scratch_file(name, 'zephyr-aspeed-ssp.elf'),
+ 'tsp': self.scratch_file(name, 'zephyr-aspeed-tsp.elf')
+ }
+
+ for cpu_num, key in enumerate(load_elf_list, start=4):
+ file = load_elf_list[key]
+ self.vm.add_args('-device',
+ f'loader,file={file},cpu-num={cpu_num}')
+
+ self.do_test_aarch64_aspeed_sdk_start(
+ self.scratch_file(name, 'image-bmc'))
+
+ def test_aarch64_ast2700fc_sdk_v09_06(self):
+ self.set_machine('ast2700fc')
+
+ self.archive_extract(self.ASSET_SDK_V906_AST2700)
+ self.start_ast2700fc_test('ast2700-default')
+ self.verify_openbmc_boot_and_login('ast2700-default')
+ self.do_ast2700_i2c_test()
+ self.do_ast2700fc_ssp_test()
+ self.do_ast2700fc_tsp_test()
+
+if __name__ == '__main__':
+ QemuSystemTest.main()
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* Re: [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc
2025-05-05 9:06 ` [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc Cédric Le Goater
@ 2025-05-06 14:22 ` Peter Maydell
2025-05-06 15:14 ` Cédric Le Goater
` (2 more replies)
0 siblings, 3 replies; 37+ messages in thread
From: Peter Maydell @ 2025-05-06 14:22 UTC (permalink / raw)
To: Cédric Le Goater; +Cc: qemu-arm, qemu-devel, Steven Lee
On Mon, 5 May 2025 at 10:12, Cédric Le Goater <clg@redhat.com> wrote:
>
> From: Steven Lee <steven_lee@aspeedtech.com>
>
> Introduce a new test suite for ast2700fc machine.
> Rename the original test_aarch64_aspeed.py to
> test_aarch64_aspeed_ast2700.py.
>
> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
> Change-Id: I3855f55c9f6e5cca1270c179445f549f8d81f36c
> Reviewed-by: Cédric Le Goater <clg@redhat.com>
> Link: https://lore.kernel.org/qemu-devel/20250505030618.3612042-1-steven_lee@aspeedtech.com
> [ clg: Added new tests in meson.build ]
> Signed-off-by: Cédric Le Goater <clg@redhat.com>
Hi; this new test seems to trigger an error in a clang-sanitizer
build; would you mind having a look?
Output: qemu-system-aarch64: warning: hub port hub0port0 has no peer
qemu-system-aarch64: warning: hub 0 with no nics
qemu-system-aarch64: warning: netdev hub0port0 has no peer
qemu-system-aarch64: warning: nic ftgmac100.0 has no peer
qemu-system-aarch64: warning: nic ftgmac100.1 has no peer
qemu-system-aarch64: warning: nic ftgmac100.2 has no peer
qemu-system-aarch64: warning: requested NIC (#net038, model
unspecified) was not created (not supported by this machine?)
../../system/memory.c:2798:27: runtime error: null pointer passed as
argument 2, which is declared to never be null
/usr/include/stdlib.h:962:6: note: nonnull attribute specified here
#0 0x617e4121b113 in flatview_lookup
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2798:12
#1 0x617e4121b113 in memory_region_find_rcu
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2833:10
#2 0x617e4121a5a9 in memory_region_find
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2860:11
#3 0x617e411c21ea in rom_check_and_register_reset
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core/loader.c:1317:19
#4 0x617e411d5ec7 in qdev_machine_creation_done
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core/machine.c:1756:9
#5 0x617e403d4877 in qemu_machine_creation_done
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:2782:5
#6 0x617e403d4877 in qmp_x_exit_preconfig
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:2810:10
#7 0x617e403d9a3c in qemu_init
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:3844:9
#8 0x617e41301126 in main
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/main.c:71:5
#9 0x7faf8202a1c9 in __libc_start_call_main
csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#10 0x7faf8202a28a in __libc_start_main csu/../csu/libc-start.c:360:3
#11 0x617e3f920654 in _start
(/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/qemu-system-aarch64+0x161d654)
(BuildId: f3f8c2ca821e695937a615bee293c4a5a336a6bd)
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior
../../system/memory.c:2798:27
thanks
-- PMM
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc
2025-05-06 14:22 ` Peter Maydell
@ 2025-05-06 15:14 ` Cédric Le Goater
2025-05-07 3:27 ` Steven Lee
2025-05-06 21:09 ` Pierrick Bouvier
2025-05-09 14:32 ` Cédric Le Goater
2 siblings, 1 reply; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-06 15:14 UTC (permalink / raw)
To: Peter Maydell; +Cc: qemu-arm, qemu-devel, Steven Lee, Jamin Lin
On 5/6/25 16:22, Peter Maydell wrote:
> On Mon, 5 May 2025 at 10:12, Cédric Le Goater <clg@redhat.com> wrote:
>>
>> From: Steven Lee <steven_lee@aspeedtech.com>
>>
>> Introduce a new test suite for ast2700fc machine.
>> Rename the original test_aarch64_aspeed.py to
>> test_aarch64_aspeed_ast2700.py.
>>
>> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
>> Change-Id: I3855f55c9f6e5cca1270c179445f549f8d81f36c
>> Reviewed-by: Cédric Le Goater <clg@redhat.com>
>> Link: https://lore.kernel.org/qemu-devel/20250505030618.3612042-1-steven_lee@aspeedtech.com
>> [ clg: Added new tests in meson.build ]
>> Signed-off-by: Cédric Le Goater <clg@redhat.com>
>
> Hi; this new test seems to trigger an error in a clang-sanitizer
> build; would you mind having a look?
yes. I can reproduce. I will check next week.
Thanks,
C.
>
> Output: qemu-system-aarch64: warning: hub port hub0port0 has no peer
> qemu-system-aarch64: warning: hub 0 with no nics
> qemu-system-aarch64: warning: netdev hub0port0 has no peer
> qemu-system-aarch64: warning: nic ftgmac100.0 has no peer
> qemu-system-aarch64: warning: nic ftgmac100.1 has no peer
> qemu-system-aarch64: warning: nic ftgmac100.2 has no peer
> qemu-system-aarch64: warning: requested NIC (#net038, model
> unspecified) was not created (not supported by this machine?)
> ../../system/memory.c:2798:27: runtime error: null pointer passed as
> argument 2, which is declared to never be null
> /usr/include/stdlib.h:962:6: note: nonnull attribute specified here
> #0 0x617e4121b113 in flatview_lookup
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2798:12
> #1 0x617e4121b113 in memory_region_find_rcu
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2833:10
> #2 0x617e4121a5a9 in memory_region_find
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2860:11
> #3 0x617e411c21ea in rom_check_and_register_reset
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core/loader.c:1317:19
> #4 0x617e411d5ec7 in qdev_machine_creation_done
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core/machine.c:1756:9
> #5 0x617e403d4877 in qemu_machine_creation_done
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:2782:5
> #6 0x617e403d4877 in qmp_x_exit_preconfig
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:2810:10
> #7 0x617e403d9a3c in qemu_init
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:3844:9
> #8 0x617e41301126 in main
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/main.c:71:5
> #9 0x7faf8202a1c9 in __libc_start_call_main
> csu/../sysdeps/nptl/libc_start_call_main.h:58:16
> #10 0x7faf8202a28a in __libc_start_main csu/../csu/libc-start.c:360:3
> #11 0x617e3f920654 in _start
> (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/qemu-system-aarch64+0x161d654)
> (BuildId: f3f8c2ca821e695937a615bee293c4a5a336a6bd)
>
> SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior
> ../../system/memory.c:2798:27
>
>
> thanks
> -- PMM
>
^ permalink raw reply [flat|nested] 37+ messages in thread
* RE: [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc
2025-05-06 15:14 ` Cédric Le Goater
@ 2025-05-07 3:27 ` Steven Lee
2025-05-07 6:39 ` Cédric Le Goater
0 siblings, 1 reply; 37+ messages in thread
From: Steven Lee @ 2025-05-07 3:27 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell
Cc: qemu-arm@nongnu.org, qemu-devel@nongnu.org, Jamin Lin, Troy Lee
Hi Cédric, Peter,
> -----Original Message-----
> From: Cédric Le Goater <clg@redhat.com>
> Sent: Tuesday, May 6, 2025 11:15 PM
> To: Peter Maydell <peter.maydell@linaro.org>
> Cc: qemu-arm@nongnu.org; qemu-devel@nongnu.org; Steven Lee
> <steven_lee@aspeedtech.com>; Jamin Lin <jamin_lin@aspeedtech.com>
> Subject: Re: [PULL 22/23] tests/function/aspeed: Add functional test for
> ast2700fc
>
> On 5/6/25 16:22, Peter Maydell wrote:
> > On Mon, 5 May 2025 at 10:12, Cédric Le Goater <clg@redhat.com> wrote:
> >>
> >> From: Steven Lee <steven_lee@aspeedtech.com>
> >>
> >> Introduce a new test suite for ast2700fc machine.
> >> Rename the original test_aarch64_aspeed.py to
> >> test_aarch64_aspeed_ast2700.py.
> >>
> >> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
> >> Change-Id: I3855f55c9f6e5cca1270c179445f549f8d81f36c
> >> Reviewed-by: Cédric Le Goater <clg@redhat.com>
> >> Link:
> >> https://lore.kernel.org/qemu-devel/20250505030618.3612042-1-steven_le
> >> e@aspeedtech.com [ clg: Added new tests in meson.build ]
> >> Signed-off-by: Cédric Le Goater <clg@redhat.com>
> >
> > Hi; this new test seems to trigger an error in a clang-sanitizer
> > build; would you mind having a look?
>
> yes. I can reproduce. I will check next week.
>
The issue is related to improper MAC configuration in the ast2700fc machine.
I will submit a new patch series to fix it.
Regards,
Steven
> >
> > Output: qemu-system-aarch64: warning: hub port hub0port0 has no peer
> > qemu-system-aarch64: warning: hub 0 with no nics
> > qemu-system-aarch64: warning: netdev hub0port0 has no peer
> > qemu-system-aarch64: warning: nic ftgmac100.0 has no peer
> > qemu-system-aarch64: warning: nic ftgmac100.1 has no peer
> > qemu-system-aarch64: warning: nic ftgmac100.2 has no peer
> > qemu-system-aarch64: warning: requested NIC (#net038, model
> > unspecified) was not created (not supported by this machine?)
> > ../../system/memory.c:2798:27: runtime error: null pointer passed as
> > argument 2, which is declared to never be null
> > /usr/include/stdlib.h:962:6: note: nonnull attribute specified here
> > #0 0x617e4121b113 in flatview_lookup
> >
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/
> memory.c:2798:12
> > #1 0x617e4121b113 in memory_region_find_rcu
> >
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/
> memory.c:2833:10
> > #2 0x617e4121a5a9 in memory_region_find
> >
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/
> memory.c:2860:11
> > #3 0x617e411c21ea in rom_check_and_register_reset
> >
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core
> /loader.c:1317:19
> > #4 0x617e411d5ec7 in qdev_machine_creation_done
> >
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core
> /machine.c:1756:9
> > #5 0x617e403d4877 in qemu_machine_creation_done
> >
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/v
> l.c:2782:5
> > #6 0x617e403d4877 in qmp_x_exit_preconfig
> >
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/v
> l.c:2810:10
> > #7 0x617e403d9a3c in qemu_init
> >
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/v
> l.c:3844:9
> > #8 0x617e41301126 in main
> >
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/
> main.c:71:5
> > #9 0x7faf8202a1c9 in __libc_start_call_main
> > csu/../sysdeps/nptl/libc_start_call_main.h:58:16
> > #10 0x7faf8202a28a in __libc_start_main csu/../csu/libc-start.c:360:3
> > #11 0x617e3f920654 in _start
> >
> (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/qemu-syste
> > m-aarch64+0x161d654)
> > (BuildId: f3f8c2ca821e695937a615bee293c4a5a336a6bd)
> >
> > SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior
> > ../../system/memory.c:2798:27
> >
> >
> > thanks
> > -- PMM
> >
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc
2025-05-07 3:27 ` Steven Lee
@ 2025-05-07 6:39 ` Cédric Le Goater
0 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-07 6:39 UTC (permalink / raw)
To: Steven Lee, Peter Maydell
Cc: qemu-arm@nongnu.org, qemu-devel@nongnu.org, Jamin Lin, Troy Lee
On 5/7/25 05:27, Steven Lee wrote:
> Hi Cédric, Peter,
>
>> -----Original Message-----
>> From: Cédric Le Goater <clg@redhat.com>
>> Sent: Tuesday, May 6, 2025 11:15 PM
>> To: Peter Maydell <peter.maydell@linaro.org>
>> Cc: qemu-arm@nongnu.org; qemu-devel@nongnu.org; Steven Lee
>> <steven_lee@aspeedtech.com>; Jamin Lin <jamin_lin@aspeedtech.com>
>> Subject: Re: [PULL 22/23] tests/function/aspeed: Add functional test for
>> ast2700fc
>>
>> On 5/6/25 16:22, Peter Maydell wrote:
>>> On Mon, 5 May 2025 at 10:12, Cédric Le Goater <clg@redhat.com> wrote:
>>>>
>>>> From: Steven Lee <steven_lee@aspeedtech.com>
>>>>
>>>> Introduce a new test suite for ast2700fc machine.
>>>> Rename the original test_aarch64_aspeed.py to
>>>> test_aarch64_aspeed_ast2700.py.
>>>>
>>>> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
>>>> Change-Id: I3855f55c9f6e5cca1270c179445f549f8d81f36c
>>>> Reviewed-by: Cédric Le Goater <clg@redhat.com>
>>>> Link:
>>>> https://lore.kernel.org/qemu-devel/20250505030618.3612042-1-steven_le
>>>> e@aspeedtech.com [ clg: Added new tests in meson.build ]
>>>> Signed-off-by: Cédric Le Goater <clg@redhat.com>
>>>
>>> Hi; this new test seems to trigger an error in a clang-sanitizer
>>> build; would you mind having a look?
>>
>> yes. I can reproduce. I will check next week.
>>
>
> The issue is related to improper MAC configuration in the ast2700fc machine.
> I will submit a new patch series to fix it.
I think it is deeper and related to the system memory initialization.
The fby35 machine has the same issue btw,
Anyhow, all fixes are welcome.
Thanks,
C.
>
> Regards,
> Steven
>
>>>
>>> Output: qemu-system-aarch64: warning: hub port hub0port0 has no peer
>>> qemu-system-aarch64: warning: hub 0 with no nics
>>> qemu-system-aarch64: warning: netdev hub0port0 has no peer
>>> qemu-system-aarch64: warning: nic ftgmac100.0 has no peer
>>> qemu-system-aarch64: warning: nic ftgmac100.1 has no peer
>>> qemu-system-aarch64: warning: nic ftgmac100.2 has no peer
>>> qemu-system-aarch64: warning: requested NIC (#net038, model
>>> unspecified) was not created (not supported by this machine?)
>>> ../../system/memory.c:2798:27: runtime error: null pointer passed as
>>> argument 2, which is declared to never be null
>>> /usr/include/stdlib.h:962:6: note: nonnull attribute specified here
>>> #0 0x617e4121b113 in flatview_lookup
>>>
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/
>> memory.c:2798:12
>>> #1 0x617e4121b113 in memory_region_find_rcu
>>>
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/
>> memory.c:2833:10
>>> #2 0x617e4121a5a9 in memory_region_find
>>>
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/
>> memory.c:2860:11
>>> #3 0x617e411c21ea in rom_check_and_register_reset
>>>
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core
>> /loader.c:1317:19
>>> #4 0x617e411d5ec7 in qdev_machine_creation_done
>>>
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core
>> /machine.c:1756:9
>>> #5 0x617e403d4877 in qemu_machine_creation_done
>>>
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/v
>> l.c:2782:5
>>> #6 0x617e403d4877 in qmp_x_exit_preconfig
>>>
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/v
>> l.c:2810:10
>>> #7 0x617e403d9a3c in qemu_init
>>>
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/v
>> l.c:3844:9
>>> #8 0x617e41301126 in main
>>>
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/
>> main.c:71:5
>>> #9 0x7faf8202a1c9 in __libc_start_call_main
>>> csu/../sysdeps/nptl/libc_start_call_main.h:58:16
>>> #10 0x7faf8202a28a in __libc_start_main csu/../csu/libc-start.c:360:3
>>> #11 0x617e3f920654 in _start
>>>
>> (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/qemu-syste
>>> m-aarch64+0x161d654)
>>> (BuildId: f3f8c2ca821e695937a615bee293c4a5a336a6bd)
>>>
>>> SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior
>>> ../../system/memory.c:2798:27
>>>
>>>
>>> thanks
>>> -- PMM
>>>
>
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc
2025-05-06 14:22 ` Peter Maydell
2025-05-06 15:14 ` Cédric Le Goater
@ 2025-05-06 21:09 ` Pierrick Bouvier
2025-05-07 6:46 ` Cédric Le Goater
2025-05-09 14:32 ` Cédric Le Goater
2 siblings, 1 reply; 37+ messages in thread
From: Pierrick Bouvier @ 2025-05-06 21:09 UTC (permalink / raw)
To: Peter Maydell, Cédric Le Goater; +Cc: qemu-arm, qemu-devel, Steven Lee
On 5/6/25 7:22 AM, Peter Maydell wrote:
> On Mon, 5 May 2025 at 10:12, Cédric Le Goater <clg@redhat.com> wrote:
>>
>> From: Steven Lee <steven_lee@aspeedtech.com>
>>
>> Introduce a new test suite for ast2700fc machine.
>> Rename the original test_aarch64_aspeed.py to
>> test_aarch64_aspeed_ast2700.py.
>>
>> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
>> Change-Id: I3855f55c9f6e5cca1270c179445f549f8d81f36c
>> Reviewed-by: Cédric Le Goater <clg@redhat.com>
>> Link: https://lore.kernel.org/qemu-devel/20250505030618.3612042-1-steven_lee@aspeedtech.com
>> [ clg: Added new tests in meson.build ]
>> Signed-off-by: Cédric Le Goater <clg@redhat.com>
>
> Hi; this new test seems to trigger an error in a clang-sanitizer
> build; would you mind having a look?
>
> Output: qemu-system-aarch64: warning: hub port hub0port0 has no peer
> qemu-system-aarch64: warning: hub 0 with no nics
> qemu-system-aarch64: warning: netdev hub0port0 has no peer
> qemu-system-aarch64: warning: nic ftgmac100.0 has no peer
> qemu-system-aarch64: warning: nic ftgmac100.1 has no peer
> qemu-system-aarch64: warning: nic ftgmac100.2 has no peer
> qemu-system-aarch64: warning: requested NIC (#net038, model
> unspecified) was not created (not supported by this machine?)
> ../../system/memory.c:2798:27: runtime error: null pointer passed as
> argument 2, which is declared to never be null
> /usr/include/stdlib.h:962:6: note: nonnull attribute specified here
> #0 0x617e4121b113 in flatview_lookup
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2798:12
> #1 0x617e4121b113 in memory_region_find_rcu
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2833:10
> #2 0x617e4121a5a9 in memory_region_find
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2860:11
> #3 0x617e411c21ea in rom_check_and_register_reset
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core/loader.c:1317:19
> #4 0x617e411d5ec7 in qdev_machine_creation_done
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core/machine.c:1756:9
> #5 0x617e403d4877 in qemu_machine_creation_done
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:2782:5
> #6 0x617e403d4877 in qmp_x_exit_preconfig
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:2810:10
> #7 0x617e403d9a3c in qemu_init
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:3844:9
> #8 0x617e41301126 in main
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/main.c:71:5
> #9 0x7faf8202a1c9 in __libc_start_call_main
> csu/../sysdeps/nptl/libc_start_call_main.h:58:16
> #10 0x7faf8202a28a in __libc_start_main csu/../csu/libc-start.c:360:3
> #11 0x617e3f920654 in _start
> (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/qemu-system-aarch64+0x161d654)
> (BuildId: f3f8c2ca821e695937a615bee293c4a5a336a6bd)
>
> SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior
> ../../system/memory.c:2798:27
>
Ran into this as well.
It would be nice to run sanitizers build in the upstream CI, so it's
fixed before hitting master...
>
> thanks
> -- PMM
>
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc
2025-05-06 21:09 ` Pierrick Bouvier
@ 2025-05-07 6:46 ` Cédric Le Goater
0 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-07 6:46 UTC (permalink / raw)
To: Pierrick Bouvier, Peter Maydell; +Cc: qemu-arm, qemu-devel, Steven Lee
On 5/6/25 23:09, Pierrick Bouvier wrote:
> On 5/6/25 7:22 AM, Peter Maydell wrote:
>> On Mon, 5 May 2025 at 10:12, Cédric Le Goater <clg@redhat.com> wrote:
>>>
>>> From: Steven Lee <steven_lee@aspeedtech.com>
>>>
>>> Introduce a new test suite for ast2700fc machine.
>>> Rename the original test_aarch64_aspeed.py to
>>> test_aarch64_aspeed_ast2700.py.
>>>
>>> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
>>> Change-Id: I3855f55c9f6e5cca1270c179445f549f8d81f36c
>>> Reviewed-by: Cédric Le Goater <clg@redhat.com>
>>> Link: https://lore.kernel.org/qemu-devel/20250505030618.3612042-1-steven_lee@aspeedtech.com
>>> [ clg: Added new tests in meson.build ]
>>> Signed-off-by: Cédric Le Goater <clg@redhat.com>
>>
>> Hi; this new test seems to trigger an error in a clang-sanitizer
>> build; would you mind having a look?
>>
>> Output: qemu-system-aarch64: warning: hub port hub0port0 has no peer
>> qemu-system-aarch64: warning: hub 0 with no nics
>> qemu-system-aarch64: warning: netdev hub0port0 has no peer
>> qemu-system-aarch64: warning: nic ftgmac100.0 has no peer
>> qemu-system-aarch64: warning: nic ftgmac100.1 has no peer
>> qemu-system-aarch64: warning: nic ftgmac100.2 has no peer
>> qemu-system-aarch64: warning: requested NIC (#net038, model
>> unspecified) was not created (not supported by this machine?)
>> ../../system/memory.c:2798:27: runtime error: null pointer passed as
>> argument 2, which is declared to never be null
>> /usr/include/stdlib.h:962:6: note: nonnull attribute specified here
>> #0 0x617e4121b113 in flatview_lookup
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2798:12
>> #1 0x617e4121b113 in memory_region_find_rcu
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2833:10
>> #2 0x617e4121a5a9 in memory_region_find
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2860:11
>> #3 0x617e411c21ea in rom_check_and_register_reset
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core/loader.c:1317:19
>> #4 0x617e411d5ec7 in qdev_machine_creation_done
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core/machine.c:1756:9
>> #5 0x617e403d4877 in qemu_machine_creation_done
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:2782:5
>> #6 0x617e403d4877 in qmp_x_exit_preconfig
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:2810:10
>> #7 0x617e403d9a3c in qemu_init
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:3844:9
>> #8 0x617e41301126 in main
>> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/main.c:71:5
>> #9 0x7faf8202a1c9 in __libc_start_call_main
>> csu/../sysdeps/nptl/libc_start_call_main.h:58:16
>> #10 0x7faf8202a28a in __libc_start_main csu/../csu/libc-start.c:360:3
>> #11 0x617e3f920654 in _start
>> (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/qemu-system-aarch64+0x161d654)
>> (BuildId: f3f8c2ca821e695937a615bee293c4a5a336a6bd)
>>
>> SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior
>> ../../system/memory.c:2798:27
>>
>
> Ran into this as well.
> It would be nice to run sanitizers build in the upstream CI, so it's fixed before hitting master...
yes. The fby35 has the same problem, so we overlooked something related to
RAM initialization a while ago.
The fby35 machine has no public FW images and no test. That's probably why.
Thanks,
C.
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc
2025-05-06 14:22 ` Peter Maydell
2025-05-06 15:14 ` Cédric Le Goater
2025-05-06 21:09 ` Pierrick Bouvier
@ 2025-05-09 14:32 ` Cédric Le Goater
2025-05-09 15:27 ` Peter Maydell
2 siblings, 1 reply; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-09 14:32 UTC (permalink / raw)
To: Peter Maydell; +Cc: qemu-arm, qemu-devel, Steven Lee
On 5/6/25 16:22, Peter Maydell wrote:
> On Mon, 5 May 2025 at 10:12, Cédric Le Goater <clg@redhat.com> wrote:
>>
>> From: Steven Lee <steven_lee@aspeedtech.com>
>>
>> Introduce a new test suite for ast2700fc machine.
>> Rename the original test_aarch64_aspeed.py to
>> test_aarch64_aspeed_ast2700.py.
>>
>> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
>> Change-Id: I3855f55c9f6e5cca1270c179445f549f8d81f36c
>> Reviewed-by: Cédric Le Goater <clg@redhat.com>
>> Link: https://lore.kernel.org/qemu-devel/20250505030618.3612042-1-steven_lee@aspeedtech.com
>> [ clg: Added new tests in meson.build ]
>> Signed-off-by: Cédric Le Goater <clg@redhat.com>
>
> Hi; this new test seems to trigger an error in a clang-sanitizer
> build; would you mind having a look?
>
> Output: qemu-system-aarch64: warning: hub port hub0port0 has no peer
> qemu-system-aarch64: warning: hub 0 with no nics
> qemu-system-aarch64: warning: netdev hub0port0 has no peer
> qemu-system-aarch64: warning: nic ftgmac100.0 has no peer
> qemu-system-aarch64: warning: nic ftgmac100.1 has no peer
> qemu-system-aarch64: warning: nic ftgmac100.2 has no peer
> qemu-system-aarch64: warning: requested NIC (#net038, model
> unspecified) was not created (not supported by this machine?)
> ../../system/memory.c:2798:27: runtime error: null pointer passed as
> argument 2, which is declared to never be null
> /usr/include/stdlib.h:962:6: note: nonnull attribute specified here
> #0 0x617e4121b113 in flatview_lookup
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2798:12
> #1 0x617e4121b113 in memory_region_find_rcu
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2833:10
> #2 0x617e4121a5a9 in memory_region_find
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/memory.c:2860:11
> #3 0x617e411c21ea in rom_check_and_register_reset
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core/loader.c:1317:19
> #4 0x617e411d5ec7 in qdev_machine_creation_done
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../hw/core/machine.c:1756:9
> #5 0x617e403d4877 in qemu_machine_creation_done
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:2782:5
> #6 0x617e403d4877 in qmp_x_exit_preconfig
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:2810:10
> #7 0x617e403d9a3c in qemu_init
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/vl.c:3844:9
> #8 0x617e41301126 in main
> /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../system/main.c:71:5
> #9 0x7faf8202a1c9 in __libc_start_call_main
> csu/../sysdeps/nptl/libc_start_call_main.h:58:16
> #10 0x7faf8202a28a in __libc_start_main csu/../csu/libc-start.c:360:3
> #11 0x617e3f920654 in _start
> (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/qemu-system-aarch64+0x161d654)
> (BuildId: f3f8c2ca821e695937a615bee293c4a5a336a6bd)
>
> SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior
> ../../system/memory.c:2798:27
>
In the ast2700fc machine and the fby35, each SoC has its own memory
region and, since there is no need for the global system memory
region, it's empty. But in some places, like
rom_check_and_register_reset(), it's a problem for the flattened
global view.
Could we patch the system memory with:
@@ -2924,6 +2924,9 @@ static int cmp_flatrange_addr(const void
static FlatRange *flatview_lookup(FlatView *view, AddrRange addr)
{
+ if (!view->ranges) {
+ return NULL;
+ }
return bsearch(&addr, view->ranges, view->nr,
sizeof(FlatRange), cmp_flatrange_addr);
}
Or, as a workaround to satisfy QEMU, insert the main SoC memory in
get_system_memory() maybe ?
I will dig more next week.
Thanks,
C.
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc
2025-05-09 14:32 ` Cédric Le Goater
@ 2025-05-09 15:27 ` Peter Maydell
2025-05-12 1:50 ` Steven Lee
2025-05-12 8:21 ` Cédric Le Goater
0 siblings, 2 replies; 37+ messages in thread
From: Peter Maydell @ 2025-05-09 15:27 UTC (permalink / raw)
To: Cédric Le Goater; +Cc: qemu-arm, qemu-devel, Steven Lee
On Fri, 9 May 2025 at 15:32, Cédric Le Goater <clg@redhat.com> wrote:
> In the ast2700fc machine and the fby35, each SoC has its own memory
> region and, since there is no need for the global system memory
> region, it's empty. But in some places, like
> rom_check_and_register_reset(), it's a problem for the flattened
> global view.
Generally speaking, board models should set things up so
that the "main" SoC for the board uses the main system memory
MR, rather than creating its own empty MR for that purpose,
I think.
But separately from that, it's weird to get into flatview_lookup
with an empty FlatView here. We called memory_region_find(),
which is a wrapper around memory_region_find_rcu(). That
function doesn't make assumptions about where the MR it's
passed is from: it walks up the tree of MRs to find the
root MR, it looks up the AddressSpace for that root MR,
and then it gets the FlatView for that AS and calls
flatview_lookup(). If the FlatView we end up with doesn't
have the MR in it, what's happened ?
-- PMM
^ permalink raw reply [flat|nested] 37+ messages in thread
* RE: [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc
2025-05-09 15:27 ` Peter Maydell
@ 2025-05-12 1:50 ` Steven Lee
2025-05-12 8:21 ` Cédric Le Goater
1 sibling, 0 replies; 37+ messages in thread
From: Steven Lee @ 2025-05-12 1:50 UTC (permalink / raw)
To: Peter Maydell, Cédric Le Goater
Cc: qemu-arm@nongnu.org, qemu-devel@nongnu.org, Troy Lee, Jamin Lin
Hi Cédric, Peter,
> -----Original Message-----
> From: Peter Maydell <peter.maydell@linaro.org>
> Sent: Friday, May 9, 2025 11:28 PM
> To: Cédric Le Goater <clg@redhat.com>
> Cc: qemu-arm@nongnu.org; qemu-devel@nongnu.org; Steven Lee
> <steven_lee@aspeedtech.com>
> Subject: Re: [PULL 22/23] tests/function/aspeed: Add functional test for
> ast2700fc
>
> On Fri, 9 May 2025 at 15:32, Cédric Le Goater <clg@redhat.com> wrote:
> > In the ast2700fc machine and the fby35, each SoC has its own memory
> > region and, since there is no need for the global system memory
> > region, it's empty. But in some places, like
> > rom_check_and_register_reset(), it's a problem for the flattened
> > global view.
>
> Generally speaking, board models should set things up so that the "main" SoC
> for the board uses the main system memory MR, rather than creating its own
> empty MR for that purpose, I think.
>
> But separately from that, it's weird to get into flatview_lookup with an empty
> FlatView here. We called memory_region_find(), which is a wrapper around
> memory_region_find_rcu(). That function doesn't make assumptions about
> where the MR it's passed is from: it walks up the tree of MRs to find the root
> MR, it looks up the AddressSpace for that root MR, and then it gets the
> FlatView for that AS and calls flatview_lookup(). If the FlatView we end up with
> doesn't have the MR in it, what's happened ?
>
I also realized this was caused by the CA35 memory not being part of the system memory, while fixing the 2700FC Clang sanitizer issue last Wednesday.
To fix it, I added the CA35 memory region to the system memory:
memory_region_add_subregion(get_system_memory(), 0, &s->ca35_memory);
Patch for reference:
https://patchwork.kernel.org/project/qemu-devel/patch/20250507101005.1474823-2-steven_lee@aspeedtech.com/
This seems to resolve the issue, though I'm not sure whether it's a proper fix or just a workaround.
Regards,
Steven
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc
2025-05-09 15:27 ` Peter Maydell
2025-05-12 1:50 ` Steven Lee
@ 2025-05-12 8:21 ` Cédric Le Goater
1 sibling, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-12 8:21 UTC (permalink / raw)
To: Peter Maydell; +Cc: qemu-arm, qemu-devel, Steven Lee
On 5/9/25 17:27, Peter Maydell wrote:
> On Fri, 9 May 2025 at 15:32, Cédric Le Goater <clg@redhat.com> wrote:
>> In the ast2700fc machine and the fby35, each SoC has its own memory
>> region and, since there is no need for the global system memory
>> region, it's empty. But in some places, like
>> rom_check_and_register_reset(), it's a problem for the flattened
>> global view.
>
> Generally speaking, board models should set things up so
> that the "main" SoC for the board uses the main system memory
> MR, rather than creating its own empty MR for that purpose,
> I think.
We can do that.
> But separately from that, it's weird to get into flatview_lookup
> with an empty FlatView here. We called memory_region_find(),
> which is a wrapper around memory_region_find_rcu(). That
> function doesn't make assumptions about where the MR it's
> passed is from: it walks up the tree of MRs to find the
> root MR, it looks up the AddressSpace for that root MR,
> and then it gets the FlatView for that AS and calls
> flatview_lookup(). If the FlatView we end up with doesn't
> have the MR in it, what's happened ?
The ROM created by the loader device does not have an associated
memory region.
Thanks,
C.
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PULL 23/23] docs: Add support for ast2700fc machine
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (21 preceding siblings ...)
2025-05-05 9:06 ` [PULL 22/23] tests/function/aspeed: Add functional test for ast2700fc Cédric Le Goater
@ 2025-05-05 9:06 ` Cédric Le Goater
2025-05-05 9:35 ` [PULL 00/23] aspeed queue Philippe Mathieu-Daudé
2025-05-06 13:58 ` Stefan Hajnoczi
24 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:06 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Steven Lee, Cédric Le Goater
From: Steven Lee <steven_lee@aspeedtech.com>
- Updated Aspeed family boards list to include `ast2700fc`.
- Added boot instructions for the `ast2700fc` machine.
- Detailed the configuration and loading of firmware for the
Cortex-A35 and Cortex-M4 processors.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: Id41312e9c7cf79bc55c6f24a87a7ad9993dc7261
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-10-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
docs/system/arm/aspeed.rst | 69 ++++++++++++++++++++++++++++++++++++--
1 file changed, 66 insertions(+), 3 deletions(-)
diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst
index 014545f4440f..58a8020eec23 100644
--- a/docs/system/arm/aspeed.rst
+++ b/docs/system/arm/aspeed.rst
@@ -1,5 +1,5 @@
-Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
-==================================================================================================================================================================================================================================================================================================================================================================================================================
+Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``ast2700fc``, ``bletchley-bmc``, ``fuji-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
+=================================================================================================================================================================================================================================================================================================================================================================================================================================
The QEMU Aspeed machines model BMCs of various OpenPOWER systems and
Aspeed evaluation boards. They are based on different releases of the
@@ -255,6 +255,7 @@ etc.
AST2700 SoC based machines :
- ``ast2700-evb`` Aspeed AST2700 Evaluation board (Cortex-A35)
+- ``ast2700fc`` Aspeed AST2700 Evaluation board (Cortex-A35 + Cortex-M4)
Supported devices
-----------------
@@ -285,7 +286,6 @@ Supported devices
Missing devices
---------------
- * Coprocessor support
* PWM and Fan Controller
* Slave GPIO Controller
* Super I/O Controller
@@ -353,6 +353,69 @@ specified path in the ${HOME} directory.
-bios ${HOME}/ast27x0_bootrom.bin
+Booting the ast2700fc machine
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+AST2700 features four Cortex-A35 primary processors and two Cortex-M4 coprocessors.
+**ast2700-evb** machine focuses on emulating the four Cortex-A35 primary processors,
+**ast2700fc** machine extends **ast2700-evb** by adding support for the two Cortex-M4 coprocessors.
+
+Steps to boot the AST2700fc machine:
+
+1. Ensure you have the following AST2700A1 binaries available in a directory
+
+ * u-boot-nodtb.bin
+ * u-boot.dtb
+ * bl31.bin
+ * optee/tee-raw.bin
+ * image-bmc
+ * zephyr-aspeed-ssp.elf (for SSP firmware, CPU 5)
+ * zephyr-aspeed-tsp.elf (for TSP firmware, CPU 6)
+
+2. Execute the following command to start ``ast2700fc`` machine:
+
+.. code-block:: bash
+
+ IMGDIR=ast2700-default
+ UBOOT_SIZE=$(stat --format=%s -L ${IMGDIR}/u-boot-nodtb.bin)
+
+ $ qemu-system-aarch64 -M ast2700fc \
+ -device loader,force-raw=on,addr=0x400000000,file=${IMGDIR}/u-boot-nodtb.bin \
+ -device loader,force-raw=on,addr=$((0x400000000 + ${UBOOT_SIZE})),file=${IMGDIR}/u-boot.dtb \
+ -device loader,force-raw=on,addr=0x430000000,file=${IMGDIR}/bl31.bin \
+ -device loader,force-raw=on,addr=0x430080000,file=${IMGDIR}/optee/tee-raw.bin \
+ -device loader,cpu-num=0,addr=0x430000000 \
+ -device loader,cpu-num=1,addr=0x430000000 \
+ -device loader,cpu-num=2,addr=0x430000000 \
+ -device loader,cpu-num=3,addr=0x430000000 \
+ -drive file=${IMGDIR}/image-bmc,if=mtd,format=raw \
+ -device loader,file=${IMGDIR}/zephyr-aspeed-ssp.elf,cpu-num=4 \
+ -device loader,file=${IMGDIR}/zephyr-aspeed-tsp.elf,cpu-num=5 \
+ -serial pty -serial pty -serial pty \
+ -snapshot \
+ -S -nographic
+
+After launching QEMU, serial devices will be automatically redirected.
+Example output:
+
+.. code-block:: bash
+
+ char device redirected to /dev/pts/55 (label serial0)
+ char device redirected to /dev/pts/56 (label serial1)
+ char device redirected to /dev/pts/57 (label serial2)
+
+- serial0: Console for the four Cortex-A35 primary processors.
+- serial1 and serial2: Consoles for the two Cortex-M4 coprocessors.
+
+Use ``tio`` or another terminal emulator to connect to the consoles:
+
+.. code-block:: bash
+
+ $ tio /dev/pts/55
+ $ tio /dev/pts/56
+ $ tio /dev/pts/57
+
+
Aspeed minibmc family boards (``ast1030-evb``)
==================================================================
--
2.49.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* Re: [PULL 00/23] aspeed queue
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (22 preceding siblings ...)
2025-05-05 9:06 ` [PULL 23/23] docs: Add support for ast2700fc machine Cédric Le Goater
@ 2025-05-05 9:35 ` Philippe Mathieu-Daudé
2025-05-05 9:43 ` Cédric Le Goater
2025-05-06 13:58 ` Stefan Hajnoczi
24 siblings, 1 reply; 37+ messages in thread
From: Philippe Mathieu-Daudé @ 2025-05-05 9:35 UTC (permalink / raw)
To: Cédric Le Goater, qemu-arm, qemu-devel
Hi Cédric,
On 5/5/25 11:06, Cédric Le Goater wrote:
> The following changes since commit e578dcc7e1590b20a84036afe5bdfa8d23a6048e:
>
> pc-bios: Add AST27x0 vBootrom (2025-05-02 09:47:14 +0200)
>
> are available in the Git repository at:
>
> https://github.com/legoater/qemu/ tags/pull-aspeed-20250505
>
> for you to fetch changes up to f32ef57f7de98ec36da52b0a13bd5d18ac4bd583:
>
> docs: Add support for ast2700fc machine (2025-05-05 09:42:16 +0200)
>
> ----------------------------------------------------------------
> aspeed queue:
>
> * Fixed AST2700 SPI model issues
> * Updated SDK images
> * Added FW support to the AST2700 EVB machines
> * Introduced an AST27x0 multi-SoC machine
>
> ----------------------------------------------------------------
> Jamin Lin (12):
> tests/functional/aspeed: Update test ASPEED SDK v09.06 for AST2500
> tests/functional/aspeed: Update test ASPEED SDK v09.06 for AST2600
> tests/functional/aspeed: Update test ASPEED SDK v03.00 for AST1030
> hw/arm/aspeed_ast27x0: Rename variable sram_name to name in ast2700 realize
> tests/functional/aspeed: Move I2C test into shared helper for AST2700 reuse
> tests/functional/aspeed: Update test ASPEED SDK v09.06
> tests/functional/aspeed: extract boot and login sequence into helper function
> hw/arm/aspeed_ast27x0 Introduce vbootrom memory region
> hw/arm/aspeed: Add support for loading vbootrom image via "-bios"
> tests/functional/aspeed: Add to test vbootrom for AST2700
> docs/system/arm/aspeed: move AST2700 content to new section
> docs/system/arm/aspeed: Support vbootrom for AST2700
>
> Joe Komlodi (1):
> hw/ssi/aspeed_smc: Allow 64-bit wide flash accesses
>
> Steven Lee (9):
> aspeed: ast27x0: Map unimplemented devices in SoC memory
> aspeed: ast27x0: Correct hex notation for device addresses
> hw/intc/aspeed: Add support for AST2700 SSP INTC
> hw/intc/aspeed: Add support for AST2700 TSP INTC
> hw/arm/aspeed_ast27x0-ssp: Introduce AST27x0 A1 SSP SoC
> hw/arm/aspeed_ast27x0-tsp: Introduce AST27x0 A1 TSP SoC
> hw/arm: Introduce ASPEED AST2700 A1 full core machine
> tests/function/aspeed: Add functional test for ast2700fc
> docs: Add support for ast2700fc machine
>
> Troy Lee (1):
> hw/arm: ast27x0: Wire up EHCI controllers
If you ever have to send a v2, please remove the 'Change-Id:' tags.
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [PULL 00/23] aspeed queue
2025-05-05 9:35 ` [PULL 00/23] aspeed queue Philippe Mathieu-Daudé
@ 2025-05-05 9:43 ` Cédric Le Goater
0 siblings, 0 replies; 37+ messages in thread
From: Cédric Le Goater @ 2025-05-05 9:43 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, qemu-arm, qemu-devel
On 5/5/25 11:35, Philippe Mathieu-Daudé wrote:
> Hi Cédric,
>
> On 5/5/25 11:06, Cédric Le Goater wrote:
>> The following changes since commit e578dcc7e1590b20a84036afe5bdfa8d23a6048e:
>>
>> pc-bios: Add AST27x0 vBootrom (2025-05-02 09:47:14 +0200)
>>
>> are available in the Git repository at:
>>
>> https://github.com/legoater/qemu/ tags/pull-aspeed-20250505
>>
>> for you to fetch changes up to f32ef57f7de98ec36da52b0a13bd5d18ac4bd583:
>>
>> docs: Add support for ast2700fc machine (2025-05-05 09:42:16 +0200)
>>
>> ----------------------------------------------------------------
>> aspeed queue:
>>
>> * Fixed AST2700 SPI model issues
>> * Updated SDK images
>> * Added FW support to the AST2700 EVB machines
>> * Introduced an AST27x0 multi-SoC machine
>>
>> ----------------------------------------------------------------
>> Jamin Lin (12):
>> tests/functional/aspeed: Update test ASPEED SDK v09.06 for AST2500
>> tests/functional/aspeed: Update test ASPEED SDK v09.06 for AST2600
>> tests/functional/aspeed: Update test ASPEED SDK v03.00 for AST1030
>> hw/arm/aspeed_ast27x0: Rename variable sram_name to name in ast2700 realize
>> tests/functional/aspeed: Move I2C test into shared helper for AST2700 reuse
>> tests/functional/aspeed: Update test ASPEED SDK v09.06
>> tests/functional/aspeed: extract boot and login sequence into helper function
>> hw/arm/aspeed_ast27x0 Introduce vbootrom memory region
>> hw/arm/aspeed: Add support for loading vbootrom image via "-bios"
>> tests/functional/aspeed: Add to test vbootrom for AST2700
>> docs/system/arm/aspeed: move AST2700 content to new section
>> docs/system/arm/aspeed: Support vbootrom for AST2700
>>
>> Joe Komlodi (1):
>> hw/ssi/aspeed_smc: Allow 64-bit wide flash accesses
>>
>> Steven Lee (9):
>> aspeed: ast27x0: Map unimplemented devices in SoC memory
>> aspeed: ast27x0: Correct hex notation for device addresses
>> hw/intc/aspeed: Add support for AST2700 SSP INTC
>> hw/intc/aspeed: Add support for AST2700 TSP INTC
>> hw/arm/aspeed_ast27x0-ssp: Introduce AST27x0 A1 SSP SoC
>> hw/arm/aspeed_ast27x0-tsp: Introduce AST27x0 A1 TSP SoC
>> hw/arm: Introduce ASPEED AST2700 A1 full core machine
>> tests/function/aspeed: Add functional test for ast2700fc
>> docs: Add support for ast2700fc machine
>>
>> Troy Lee (1):
>> hw/arm: ast27x0: Wire up EHCI controllers
>
> If you ever have to send a v2, please remove the 'Change-Id:' tags.
>
This is a Gerrit trailer AFAICT.
Why ? is it breaking some tool ? Can't we keep such reference ? If so,
I'd rather fix checkpatch.pl.
Thanks,
C.
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PULL 00/23] aspeed queue
2025-05-05 9:06 [PULL 00/23] aspeed queue Cédric Le Goater
` (23 preceding siblings ...)
2025-05-05 9:35 ` [PULL 00/23] aspeed queue Philippe Mathieu-Daudé
@ 2025-05-06 13:58 ` Stefan Hajnoczi
24 siblings, 0 replies; 37+ messages in thread
From: Stefan Hajnoczi @ 2025-05-06 13:58 UTC (permalink / raw)
To: Cédric Le Goater; +Cc: qemu-arm, qemu-devel, Cédric Le Goater
[-- Attachment #1: Type: text/plain, Size: 116 bytes --]
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/10.0 for any user-visible changes.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread