From: "Cédric Le Goater" <clg@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Alex Williamson" <alex.williamson@redhat.com>,
"Tomita Moeko" <tomitamoeko@gmail.com>,
"Corvin Köhne" <c.koehne@beckhoff.com>,
"Cédric Le Goater" <clg@redhat.com>
Subject: [PULL 09/28] vfio/igd: Enable OpRegion by default
Date: Fri, 9 May 2025 15:12:58 +0200 [thread overview]
Message-ID: <20250509131317.164235-10-clg@redhat.com> (raw)
In-Reply-To: <20250509131317.164235-1-clg@redhat.com>
From: Tomita Moeko <tomitamoeko@gmail.com>
As the presence of OpRegion is used to detect IGD device now, and
guest driver usually depends on OpRegion to work. Enable OpRegion
on IGD devices by default for out-of-the-box passthrough experience
(except pre-boot display output), especially for libvirt users.
Example of IGD passthrough with libvirt:
<hostdev mode="subsystem" type="pci" managed="yes">
<source>
<address domain="0x0000" bus="0x00" slot="0x02" function="0x0"/>
</source>
<rom file="/path/to/igd/rom"/>
<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0"/>
</hostdev>
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250505170305.23622-7-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
docs/igd-assign.txt | 4 ++--
hw/vfio/pci.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/docs/igd-assign.txt b/docs/igd-assign.txt
index 95beb7681279ca97fc2b4b390045847dcd59eabd..fc444503ff310a317d5d6724b4656c29c4a7dc87 100644
--- a/docs/igd-assign.txt
+++ b/docs/igd-assign.txt
@@ -102,7 +102,7 @@ digital formats work well.
Options
=======
-* x-igd-opregion=[on|*off*]
+* x-igd-opregion=[*on*|off]
Copy host IGD OpRegion and expose it to guest with fw_cfg
* x-igd-lpc=[on|*off*]
@@ -124,7 +124,7 @@ Examples
* Adding IGD with OpRegion and LPC ID hack, but without VGA ranges
(For UEFI guests)
- -device vfio-pci,host=00:02.0,id=hostdev0,addr=2.0,x-igd-legacy-mode=off,x-igd-opregion=on,x-igd-lpc=on,romfile=efi_oprom.rom
+ -device vfio-pci,host=00:02.0,id=hostdev0,addr=2.0,x-igd-legacy-mode=off,x-igd-lpc=on,romfile=efi_oprom.rom
Guest firmware
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 6908bcc0d3145c98d2999841d00451bdc51b6a3e..e1fab21b47adb4df9b011b3efb6d7c15c84bc8c2 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -3385,7 +3385,7 @@ static const Property vfio_pci_dev_properties[] = {
DEFINE_PROP_BIT("x-req", VFIOPCIDevice, features,
VFIO_FEATURE_ENABLE_REQ_BIT, true),
DEFINE_PROP_BIT("x-igd-opregion", VFIOPCIDevice, features,
- VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT, false),
+ VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT, true),
DEFINE_PROP_BIT("x-igd-lpc", VFIOPCIDevice, features,
VFIO_FEATURE_ENABLE_IGD_LPC_BIT, false),
DEFINE_PROP_ON_OFF_AUTO("x-igd-legacy-mode", VFIOPCIDevice,
--
2.49.0
next prev parent reply other threads:[~2025-05-09 13:15 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-09 13:12 [PULL 00/28] vfio queue Cédric Le Goater
2025-05-09 13:12 ` [PULL 01/28] vfio/container: ram discard disable helper Cédric Le Goater
2025-05-09 13:12 ` [PULL 02/28] vfio/container: reform vfio_container_connect cleanup Cédric Le Goater
2025-05-09 13:12 ` [PULL 03/28] vfio/container: vfio_container_group_add Cédric Le Goater
2025-05-09 13:12 ` [PULL 04/28] vfio/igd: Restrict legacy mode to Gen6-9 devices Cédric Le Goater
2025-05-09 13:12 ` [PULL 05/28] vfio/igd: Always emulate ASLS (OpRegion) register Cédric Le Goater
2025-05-09 13:12 ` [PULL 06/28] vfio/igd: Detect IGD device by OpRegion Cédric Le Goater
2025-05-09 13:12 ` [PULL 07/28] vfio/igd: Check vendor and device ID on GVT-g mdev Cédric Le Goater
2025-05-09 13:12 ` [PULL 08/28] vfio/igd: Check OpRegion support " Cédric Le Goater
2025-05-09 13:12 ` Cédric Le Goater [this message]
2025-05-09 13:12 ` [PULL 10/28] vfio/igd: Allow overriding GMS with 0xf0 to 0xfe on Gen9+ Cédric Le Goater
2025-05-09 13:13 ` [PULL 11/28] vfio/igd: Only emulate GGC register when x-igd-gms is set Cédric Le Goater
2025-05-09 13:13 ` [PULL 12/28] vfio/igd: Remove generation limitation for IGD passthrough Cédric Le Goater
2025-05-09 13:13 ` [PULL 13/28] linux-header: update-linux-header script changes Cédric Le Goater
2025-05-09 13:13 ` [PULL 14/28] linux-headers: Update to Linux v6.15-rc3 Cédric Le Goater
2025-05-09 13:13 ` [PULL 15/28] vfio: add vfio_device_prepare() Cédric Le Goater
2025-05-09 13:13 ` [PULL 16/28] vfio: add vfio_device_unprepare() Cédric Le Goater
2025-05-09 13:13 ` [PULL 17/28] vfio: add vfio_attach_device_by_iommu_type() Cédric Le Goater
2025-05-09 13:13 ` [PULL 18/28] vfio: add vfio_device_get_irq_info() helper Cédric Le Goater
2025-05-09 13:13 ` [PULL 19/28] vfio: consistently handle return value for helpers Cédric Le Goater
2025-05-09 13:13 ` [PULL 20/28] vfio: add strread/writeerror() Cédric Le Goater
2025-05-09 13:13 ` [PULL 21/28] vfio: add vfio_pci_config_space_read/write() Cédric Le Goater
2025-05-09 13:13 ` [PULL 22/28] vfio: add unmap_all flag to DMA unmap callback Cédric Le Goater
2025-05-09 13:13 ` [PULL 23/28] vfio: implement unmap all for DMA unmap callbacks Cédric Le Goater
2025-05-09 13:13 ` [PULL 24/28] vfio: add device IO ops vector Cédric Le Goater
2025-05-09 13:13 ` [PULL 25/28] vfio: add region info cache Cédric Le Goater
2025-10-14 13:16 ` Cédric Le Goater
2025-10-14 13:32 ` John Levon
2025-10-14 13:49 ` Alex Williamson
2025-10-14 13:58 ` Cédric Le Goater
2025-10-14 14:01 ` John Levon
2025-10-14 14:00 ` John Levon
2025-10-14 14:29 ` Alex Williamson
2025-10-14 14:36 ` John Levon
2025-05-09 13:13 ` [PULL 26/28] vfio: add read/write to device IO ops vector Cédric Le Goater
2025-05-09 13:13 ` [PULL 27/28] vfio: add vfio-pci-base class Cédric Le Goater
2025-05-09 13:13 ` [PULL 28/28] vfio/container: pass listener_begin/commit callbacks Cédric Le Goater
2025-05-10 18:36 ` [PULL 00/28] vfio queue Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250509131317.164235-10-clg@redhat.com \
--to=clg@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=c.koehne@beckhoff.com \
--cc=qemu-devel@nongnu.org \
--cc=tomitamoeko@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).