qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Fabiano Rosas <farosas@suse.de>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	peterx@redhat.com, "Dr. David Alan Gilbert" <dave@treblig.org>,
	Mario Casquero <mcasquer@redhat.com>
Subject: [PULL 12/12] migration/hmp: Add "info migrate -a", reorg the dump
Date: Tue, 20 May 2025 13:07:51 -0400	[thread overview]
Message-ID: <20250520170751.786787-13-peterx@redhat.com> (raw)
In-Reply-To: <20250520170751.786787-1-peterx@redhat.com>

A new parameter "-a" is added to "info migrate" to dump all info, while
when not specified it only dumps the important ones.  When at it, reorg
everything to make it easier to read for human.

The general rule is:

  - Put important things at the top
  - Reuse a single line when things are very relevant, hence reducing lines
    needed to show the results
  - Remove almost useless ones (e.g. "normal_bytes", while we also have
    both "page size" and "normal" pages)
  - Regroup things, so that related fields will show together
  - etc.

Before this change, it looks like (one example of a completed case):

  globals:
  store-global-state: on
  only-migratable: off
  send-configuration: on
  send-section-footer: on
  send-switchover-start: on
  clear-bitmap-shift: 18
  Migration status: completed
  total time: 122952 ms
  downtime: 76 ms
  setup: 15 ms
  transferred ram: 130825923 kbytes
  throughput: 8717.68 mbps
  remaining ram: 0 kbytes
  total ram: 16777992 kbytes
  duplicate: 997263 pages
  normal: 32622225 pages
  normal bytes: 130488900 kbytes
  dirty sync count: 10
  page size: 4 kbytes
  multifd bytes: 117134260 kbytes
  pages-per-second: 169431
  postcopy request count: 5835
  precopy ram: 15 kbytes
  postcopy ram: 13691151 kbytes

After this change, sample output (default, no "-a" specified):

  Status: postcopy-active
  Time (ms): total=40504, setup=14, down=145
  RAM info:
    Bandwidth (mbps): 6102.65
    Sizes (KB): psize=4, total=16777992,
      transferred=37673019, remain=2136404,
      precopy=3, multifd=26108780, postcopy=11563855
    Pages: normal=9394288, zero=600672, rate_per_sec=185875
    Others: dirty_syncs=3, dirty_pages_rate=278378, postcopy_req=4078

Sample output when "-a" specified:

  Status: active
  Time (ms): total=3040, setup=4, exp_down=300
  RAM info:
    Throughput (mbps): 10.51
    Sizes (KB): psize=4, total=4211528,
      transferred=3979, remain=4206452,
      precopy=3978, multifd=0, postcopy=0
    Pages: normal=992, zero=277, rate_per_sec=320
    Others: dirty_syncs=1
  Globals:
    store-global-state: on
    only-migratable: off
    send-configuration: on
    send-section-footer: on
    send-switchover-start: on
    clear-bitmap-shift: 18
  XBZRLE: size=67108864, transferred=0, pages=0, miss=188451
    miss_rate=0.00, encode_rate=0.00, overflow=0
  CPU Throttle (%): 0
  Dirty-limit Throttle (us): 0
  Dirty-limit Ring Full (us): 0
  Postcopy Blocktime (ms): 0
  Postcopy vCPU Blocktime: ...

Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Tested-by: Mario Casquero <mcasquer@redhat.com>
[peterx: print "," too in 1st line of RAM info]
Signed-off-by: Peter Xu <peterx@redhat.com>
---
 migration/migration-hmp-cmds.c | 186 +++++++++++++++++----------------
 hmp-commands-info.hx           |   6 +-
 2 files changed, 99 insertions(+), 93 deletions(-)

diff --git a/migration/migration-hmp-cmds.c b/migration/migration-hmp-cmds.c
index 49c26daed3..e8a563c7d8 100644
--- a/migration/migration-hmp-cmds.c
+++ b/migration/migration-hmp-cmds.c
@@ -37,29 +37,28 @@ static void migration_global_dump(Monitor *mon)
 {
     MigrationState *ms = migrate_get_current();
 
-    monitor_printf(mon, "globals:\n");
-    monitor_printf(mon, "store-global-state: %s\n",
+    monitor_printf(mon, "Globals:\n");
+    monitor_printf(mon, "  store-global-state: %s\n",
                    ms->store_global_state ? "on" : "off");
-    monitor_printf(mon, "only-migratable: %s\n",
+    monitor_printf(mon, "  only-migratable: %s\n",
                    only_migratable ? "on" : "off");
-    monitor_printf(mon, "send-configuration: %s\n",
+    monitor_printf(mon, "  send-configuration: %s\n",
                    ms->send_configuration ? "on" : "off");
-    monitor_printf(mon, "send-section-footer: %s\n",
+    monitor_printf(mon, "  send-section-footer: %s\n",
                    ms->send_section_footer ? "on" : "off");
-    monitor_printf(mon, "send-switchover-start: %s\n",
+    monitor_printf(mon, "  send-switchover-start: %s\n",
                    ms->send_switchover_start ? "on" : "off");
-    monitor_printf(mon, "clear-bitmap-shift: %u\n",
+    monitor_printf(mon, "  clear-bitmap-shift: %u\n",
                    ms->clear_bitmap_shift);
 }
 
 void hmp_info_migrate(Monitor *mon, const QDict *qdict)
 {
+    bool show_all = qdict_get_try_bool(qdict, "all", false);
     MigrationInfo *info;
 
     info = qmp_query_migrate(NULL);
 
-    migration_global_dump(mon);
-
     if (info->blocked_reasons) {
         strList *reasons = info->blocked_reasons;
         monitor_printf(mon, "Outgoing migration blocked:\n");
@@ -70,7 +69,7 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict)
     }
 
     if (info->has_status) {
-        monitor_printf(mon, "Migration status: %s",
+        monitor_printf(mon, "Status: %s",
                        MigrationStatus_str(info->status));
         if (info->status == MIGRATION_STATUS_FAILED && info->error_desc) {
             monitor_printf(mon, " (%s)\n", info->error_desc);
@@ -78,107 +77,130 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict)
             monitor_printf(mon, "\n");
         }
 
-        monitor_printf(mon, "total time: %" PRIu64 " ms\n",
-                       info->total_time);
-        if (info->has_expected_downtime) {
-            monitor_printf(mon, "expected downtime: %" PRIu64 " ms\n",
-                           info->expected_downtime);
-        }
-        if (info->has_downtime) {
-            monitor_printf(mon, "downtime: %" PRIu64 " ms\n",
-                           info->downtime);
+        if (info->total_time) {
+            monitor_printf(mon, "Time (ms): total=%" PRIu64,
+                           info->total_time);
+            if (info->has_setup_time) {
+                monitor_printf(mon, ", setup=%" PRIu64,
+                               info->setup_time);
+            }
+            if (info->has_expected_downtime) {
+                monitor_printf(mon, ", exp_down=%" PRIu64,
+                               info->expected_downtime);
+            }
+            if (info->has_downtime) {
+                monitor_printf(mon, ", down=%" PRIu64,
+                               info->downtime);
+            }
+            monitor_printf(mon, "\n");
         }
-        if (info->has_setup_time) {
-            monitor_printf(mon, "setup: %" PRIu64 " ms\n",
-                           info->setup_time);
+    }
+
+    if (info->has_socket_address) {
+        SocketAddressList *addr;
+
+        monitor_printf(mon, "Sockets: [\n");
+
+        for (addr = info->socket_address; addr; addr = addr->next) {
+            char *s = socket_uri(addr->value);
+            monitor_printf(mon, "\t%s\n", s);
+            g_free(s);
         }
+        monitor_printf(mon, "]\n");
     }
 
     if (info->ram) {
-        monitor_printf(mon, "transferred ram: %" PRIu64 " kbytes\n",
-                       info->ram->transferred >> 10);
-        monitor_printf(mon, "throughput: %0.2f mbps\n",
+        monitor_printf(mon, "RAM info:\n");
+        monitor_printf(mon, "  Throughput (Mbps): %0.2f\n",
                        info->ram->mbps);
-        monitor_printf(mon, "remaining ram: %" PRIu64 " kbytes\n",
-                       info->ram->remaining >> 10);
-        monitor_printf(mon, "total ram: %" PRIu64 " kbytes\n",
+        monitor_printf(mon, "  Sizes (KiB): pagesize=%" PRIu64
+                       ", total=%" PRIu64 ",\n",
+                       info->ram->page_size >> 10,
                        info->ram->total >> 10);
-        monitor_printf(mon, "duplicate: %" PRIu64 " pages\n",
-                       info->ram->duplicate);
-        monitor_printf(mon, "normal: %" PRIu64 " pages\n",
-                       info->ram->normal);
-        monitor_printf(mon, "normal bytes: %" PRIu64 " kbytes\n",
-                       info->ram->normal_bytes >> 10);
-        monitor_printf(mon, "dirty sync count: %" PRIu64 "\n",
-                       info->ram->dirty_sync_count);
-        monitor_printf(mon, "page size: %" PRIu64 " kbytes\n",
-                       info->ram->page_size >> 10);
-        monitor_printf(mon, "multifd bytes: %" PRIu64 " kbytes\n",
-                       info->ram->multifd_bytes >> 10);
-        monitor_printf(mon, "pages-per-second: %" PRIu64 "\n",
+        monitor_printf(mon, "    transferred=%" PRIu64
+                       ", remain=%" PRIu64 ",\n",
+                       info->ram->transferred >> 10,
+                       info->ram->remaining >> 10);
+        monitor_printf(mon, "    precopy=%" PRIu64
+                       ", multifd=%" PRIu64
+                       ", postcopy=%" PRIu64,
+                       info->ram->precopy_bytes >> 10,
+                       info->ram->multifd_bytes >> 10,
+                       info->ram->postcopy_bytes >> 10);
+
+        if (info->vfio) {
+            monitor_printf(mon, ", vfio=%" PRIu64,
+                           info->vfio->transferred >> 10);
+        }
+        monitor_printf(mon, "\n");
+
+        monitor_printf(mon, "  Pages: normal=%" PRIu64 ", zero=%" PRIu64
+                       ", rate_per_sec=%" PRIu64 "\n",
+                       info->ram->normal,
+                       info->ram->duplicate,
                        info->ram->pages_per_second);
+        monitor_printf(mon, "  Others: dirty_syncs=%" PRIu64,
+                       info->ram->dirty_sync_count);
 
         if (info->ram->dirty_pages_rate) {
-            monitor_printf(mon, "dirty pages rate: %" PRIu64 " pages\n",
+            monitor_printf(mon, ", dirty_pages_rate=%" PRIu64,
                            info->ram->dirty_pages_rate);
         }
         if (info->ram->postcopy_requests) {
-            monitor_printf(mon, "postcopy request count: %" PRIu64 "\n",
+            monitor_printf(mon, ", postcopy_req=%" PRIu64,
                            info->ram->postcopy_requests);
         }
-        if (info->ram->precopy_bytes) {
-            monitor_printf(mon, "precopy ram: %" PRIu64 " kbytes\n",
-                           info->ram->precopy_bytes >> 10);
-        }
         if (info->ram->downtime_bytes) {
-            monitor_printf(mon, "downtime ram: %" PRIu64 " kbytes\n",
-                           info->ram->downtime_bytes >> 10);
-        }
-        if (info->ram->postcopy_bytes) {
-            monitor_printf(mon, "postcopy ram: %" PRIu64 " kbytes\n",
-                           info->ram->postcopy_bytes >> 10);
+            monitor_printf(mon, ", downtime_ram=%" PRIu64,
+                           info->ram->downtime_bytes);
         }
         if (info->ram->dirty_sync_missed_zero_copy) {
-            monitor_printf(mon,
-                           "Zero-copy-send fallbacks happened: %" PRIu64 " times\n",
+            monitor_printf(mon, ", zerocopy_fallbacks=%" PRIu64,
                            info->ram->dirty_sync_missed_zero_copy);
         }
+        monitor_printf(mon, "\n");
+    }
+
+    if (!show_all) {
+        goto out;
     }
 
+    migration_global_dump(mon);
+
     if (info->xbzrle_cache) {
-        monitor_printf(mon, "cache size: %" PRIu64 " bytes\n",
-                       info->xbzrle_cache->cache_size);
-        monitor_printf(mon, "xbzrle transferred: %" PRIu64 " kbytes\n",
-                       info->xbzrle_cache->bytes >> 10);
-        monitor_printf(mon, "xbzrle pages: %" PRIu64 " pages\n",
-                       info->xbzrle_cache->pages);
-        monitor_printf(mon, "xbzrle cache miss: %" PRIu64 " pages\n",
-                       info->xbzrle_cache->cache_miss);
-        monitor_printf(mon, "xbzrle cache miss rate: %0.2f\n",
-                       info->xbzrle_cache->cache_miss_rate);
-        monitor_printf(mon, "xbzrle encoding rate: %0.2f\n",
-                       info->xbzrle_cache->encoding_rate);
-        monitor_printf(mon, "xbzrle overflow: %" PRIu64 "\n",
+        monitor_printf(mon, "XBZRLE: size=%" PRIu64
+                       ", transferred=%" PRIu64
+                       ", pages=%" PRIu64
+                       ", miss=%" PRIu64 "\n"
+                       "  miss_rate=%0.2f"
+                       ", encode_rate=%0.2f"
+                       ", overflow=%" PRIu64 "\n",
+                       info->xbzrle_cache->cache_size,
+                       info->xbzrle_cache->bytes,
+                       info->xbzrle_cache->pages,
+                       info->xbzrle_cache->cache_miss,
+                       info->xbzrle_cache->cache_miss_rate,
+                       info->xbzrle_cache->encoding_rate,
                        info->xbzrle_cache->overflow);
     }
 
     if (info->has_cpu_throttle_percentage) {
-        monitor_printf(mon, "cpu throttle percentage: %" PRIu64 "\n",
+        monitor_printf(mon, "CPU Throttle (%%): %" PRIu64 "\n",
                        info->cpu_throttle_percentage);
     }
 
     if (info->has_dirty_limit_throttle_time_per_round) {
-        monitor_printf(mon, "dirty-limit throttle time: %" PRIu64 " us\n",
+        monitor_printf(mon, "Dirty-limit Throttle (us): %" PRIu64 "\n",
                        info->dirty_limit_throttle_time_per_round);
     }
 
     if (info->has_dirty_limit_ring_full_time) {
-        monitor_printf(mon, "dirty-limit ring full time: %" PRIu64 " us\n",
+        monitor_printf(mon, "Dirty-limit Ring Full (us): %" PRIu64 "\n",
                        info->dirty_limit_ring_full_time);
     }
 
     if (info->has_postcopy_blocktime) {
-        monitor_printf(mon, "postcopy blocktime: %u\n",
+        monitor_printf(mon, "Postcopy Blocktime (ms): %" PRIu32 "\n",
                        info->postcopy_blocktime);
     }
 
@@ -189,28 +211,12 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict)
         visit_type_uint32List(v, NULL, &info->postcopy_vcpu_blocktime,
                               &error_abort);
         visit_complete(v, &str);
-        monitor_printf(mon, "postcopy vcpu blocktime: %s\n", str);
+        monitor_printf(mon, "Postcopy vCPU Blocktime: %s\n", str);
         g_free(str);
         visit_free(v);
     }
-    if (info->has_socket_address) {
-        SocketAddressList *addr;
-
-        monitor_printf(mon, "socket address: [\n");
-
-        for (addr = info->socket_address; addr; addr = addr->next) {
-            char *s = socket_uri(addr->value);
-            monitor_printf(mon, "\t%s\n", s);
-            g_free(s);
-        }
-        monitor_printf(mon, "]\n");
-    }
-
-    if (info->vfio) {
-        monitor_printf(mon, "vfio device transferred: %" PRIu64 " kbytes\n",
-                       info->vfio->transferred >> 10);
-    }
 
+out:
     qapi_free_MigrationInfo(info);
 }
 
diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
index c59cd6637b..639a450ee5 100644
--- a/hmp-commands-info.hx
+++ b/hmp-commands-info.hx
@@ -475,9 +475,9 @@ ERST
 
     {
         .name       = "migrate",
-        .args_type  = "",
-        .params     = "",
-        .help       = "show migration status",
+        .args_type  = "all:-a",
+        .params     = "[-a]",
+        .help       = "show migration status (-a: all, dump all status)",
         .cmd        = hmp_info_migrate,
     },
 
-- 
2.49.0



  parent reply	other threads:[~2025-05-20 17:09 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-20 17:07 [PULL 00/12] Migration 20250520 patches Peter Xu
2025-05-20 17:07 ` [PULL 01/12] scripts/vmstate-static-checker.py: Add new hpet entry for num_timers Peter Xu
2025-05-20 17:07 ` [PULL 02/12] qtest/migration/rdma: Enforce RLIMIT_MEMLOCK >= 128MB requirement Peter Xu
2025-05-20 17:07 ` [PULL 03/12] qtest/migration/rdma: Add test for rdma migration with ipv6 Peter Xu
2025-05-20 17:07 ` [PULL 04/12] ci: Re-enable python subtests in qtest migration suite Peter Xu
2025-05-20 17:07 ` [PULL 05/12] ci: Fix build-previous-qemu when the version tag is absent Peter Xu
2025-05-20 17:07 ` [PULL 06/12] ci: Reduce the size of artifacts for build-previous-qemu Peter Xu
2025-05-20 17:07 ` [PULL 07/12] migration: write zero pages when postcopy enabled Peter Xu
2025-05-20 17:07 ` [PULL 08/12] migration: enable multifd and postcopy together Peter Xu
2025-05-20 17:07 ` [PULL 09/12] tests/qtest/migration: add postcopy tests with multifd Peter Xu
2025-05-20 17:07 ` [PULL 10/12] migration/multifd: Don't send device state packets with zerocopy flag Peter Xu
2025-05-20 17:07 ` [PULL 11/12] migration: Allow caps to be set when preempt or multifd cap enabled Peter Xu
2025-05-20 17:07 ` Peter Xu [this message]
2025-05-22 18:47 ` [PULL 00/12] Migration 20250520 patches Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250520170751.786787-13-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=dave@treblig.org \
    --cc=farosas@suse.de \
    --cc=mcasquer@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).