[PATCH REPOST v4 4/4] acpi/virt: suppress UART device & SPCR when guest has no serial hardware

[Li Chen <me@linux.beauty>]

From: Li Chen <chenl311@chinatelecom.cn>

The virt machines always instantiate a PL011/16550 at UART0 and
describe it in ACPI (DSDT device node plus optional SPCR table).  When
the command line contains “-serial none” there is no backend attached to
that UART, yet the guest still discovers it via ACPI and may try to use
it as a console, causing unexpected results.

And also explicitly add "-serial stdio" in bios-tables-test.c to allow
serial device creation, otherwise DSDT assert would get failure because
"-nodefaults" will not create uart device by default:

```
stderr:
acpi-test: Warning! DSDT binary file mismatch. Actual [aml:/tmp/aml-BMOL72], Expected [aml:tests/data/acpi/aarch64/virt/DSDT].
See source file tests/qtest/bios-tables-test.c for instructions on how to update expected files.
acpi-test: Warning! DSDT mismatch. Actual [asl:/tmp/asl-RNOL72.dsl, aml:/tmp/aml-BMOL72], Expected [asl:/tmp/asl-ZVQL72.dsl, aml:tests/data/acpi/aarch64/virt/DS
DT].
```

Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
---

Notes:
    Changes since v3: 1. Add Reviewed-by from Sunil V L <sunilvl@ventanamicro.com>
                      2. Explicitly add "-serial stdio" to pass DSDT assert

 hw/arm/virt-acpi-build.c       | 15 +++++++++------
 hw/riscv/virt-acpi-build.c     |  7 +++++--
 include/system/system.h        |  2 ++
 system/vl.c                    |  5 +++++
 tests/qtest/bios-tables-test.c |  5 +++--
 5 files changed, 24 insertions(+), 10 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index d77d16cbd3..c26aedb1b1 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -59,6 +59,7 @@
 #include "hw/acpi/viot.h"
 #include "hw/virtio/virtio-acpi.h"
 #include "target/arm/multiprocessing.h"
+#include "system/system.h"
 
 #define ARM_SPI_BASE 32
 
@@ -821,11 +822,13 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
      */
     scope = aml_scope("\\_SB");
     acpi_dsdt_add_cpus(scope, vms);
-    acpi_dsdt_add_uart(scope, &memmap[VIRT_UART0],
-                       (irqmap[VIRT_UART0] + ARM_SPI_BASE), 0);
-    if (vms->second_ns_uart_present) {
-        acpi_dsdt_add_uart(scope, &memmap[VIRT_UART1],
-                           (irqmap[VIRT_UART1] + ARM_SPI_BASE), 1);
+    if (serial_exist()) {
+        acpi_dsdt_add_uart(scope, &memmap[VIRT_UART0],
+                           (irqmap[VIRT_UART0] + ARM_SPI_BASE), 0);
+        if (vms->second_ns_uart_present) {
+            acpi_dsdt_add_uart(scope, &memmap[VIRT_UART1],
+                               (irqmap[VIRT_UART1] + ARM_SPI_BASE), 1);
+        }
     }
     if (vmc->acpi_expose_flash) {
         acpi_dsdt_add_flash(scope, &memmap[VIRT_FLASH]);
@@ -937,7 +940,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
 
     acpi_add_table(table_offsets, tables_blob);
 
-    if (ms->acpi_spcr_enabled) {
+    if (ms->acpi_spcr_enabled && serial_exist()) {
         spcr_setup(tables_blob, tables->linker, vms);
     }
 
diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c
index ee1416d264..80bf3c3cec 100644
--- a/hw/riscv/virt-acpi-build.c
+++ b/hw/riscv/virt-acpi-build.c
@@ -39,6 +39,7 @@
 #include "qapi/error.h"
 #include "qemu/error-report.h"
 #include "system/reset.h"
+#include "system/system.h"
 
 #define ACPI_BUILD_TABLE_SIZE             0x20000
 #define ACPI_BUILD_INTC_ID(socket, index) ((socket << 24) | (index))
@@ -474,7 +475,9 @@ static void build_dsdt(GArray *table_data,
                                  memmap[VIRT_APLIC_S].size, "RSCV0002");
     }
 
-    acpi_dsdt_add_uart(scope, &memmap[VIRT_UART0], UART0_IRQ);
+    if (serial_exist())
+        acpi_dsdt_add_uart(scope, &memmap[VIRT_UART0], UART0_IRQ);
+
     if (virt_is_iommu_sys_enabled(s)) {
         acpi_dsdt_add_iommu_sys(scope, &memmap[VIRT_IOMMU_SYS], IOMMU_SYS_IRQ);
     }
@@ -895,7 +898,7 @@ static void virt_acpi_build(RISCVVirtState *s, AcpiBuildTables *tables)
 
     acpi_add_table(table_offsets, tables_blob);
 
-    if (ms->acpi_spcr_enabled) {
+    if (ms->acpi_spcr_enabled && serial_exist()) {
         spcr_setup(tables_blob, tables->linker, s);
     }
 
diff --git a/include/system/system.h b/include/system/system.h
index a7effe7dfd..ca1af38432 100644
--- a/include/system/system.h
+++ b/include/system/system.h
@@ -75,6 +75,8 @@ extern unsigned int nb_prom_envs;
 /* Return the Chardev for serial port i, or NULL if none */
 Chardev *serial_hd(int i);
 
+bool serial_exist(void);
+
 /* parallel ports */
 
 #define MAX_PARALLEL_PORTS 3
diff --git a/system/vl.c b/system/vl.c
index fd402b8ff8..e340ee3a95 100644
--- a/system/vl.c
+++ b/system/vl.c
@@ -1485,6 +1485,11 @@ Chardev *serial_hd(int i)
     return NULL;
 }
 
+bool serial_exist(void)
+{
+    return serial_hd(0) ? true : false;
+}
+
 static bool parallel_parse(const char *devname, Error **errp)
 {
     static int index = 0;
diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c
index 44de152a36..452566fa86 100644
--- a/tests/qtest/bios-tables-test.c
+++ b/tests/qtest/bios-tables-test.c
@@ -824,10 +824,11 @@ static char *test_acpi_create_args(test_data *data, const char *params)
         /*
          * TODO: convert '-drive if=pflash' to new syntax (see e33763be7cd3)
          * when arm/virt boad starts to support it.
+         * NOTE: Explicitly add "-serial stdio" to enable uart in DSDT.
          */
         if (data->cd) {
             args = g_strdup_printf("-machine %s%s %s -accel tcg "
-                "-nodefaults -nographic "
+                "-nodefaults -serial stdio -nographic "
                 "-drive if=pflash,format=raw,file=%s,readonly=on "
                 "-drive if=pflash,format=raw,file=%s,snapshot=on -cdrom %s %s",
                 data->machine, data->machine_param ?: "",
@@ -835,7 +836,7 @@ static char *test_acpi_create_args(test_data *data, const char *params)
                 data->uefi_fl1, data->uefi_fl2, data->cd, params ? params : "");
         } else {
             args = g_strdup_printf("-machine %s%s %s -accel tcg "
-                "-nodefaults -nographic "
+                "-nodefaults -serial stdio -nographic "
                 "-drive if=pflash,format=raw,file=%s,readonly=on "
                 "-drive if=pflash,format=raw,file=%s,snapshot=on %s",
                 data->machine, data->machine_param ?: "",
-- 
2.49.0