qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: peterx@redhat.com, Juraj Marcin <jmarcin@redhat.com>,
	Mario Casquero <mcasquer@redhat.com>,
	Fabiano Rosas <farosas@suse.de>,
	"Dr . David Alan Gilbert" <dave@treblig.org>,
	Li Zhijian <lizhijian@fujitsu.com>
Subject: [PATCH v3 01/11] migration/hmp: Reorg "info migrate" once more
Date: Fri, 13 Jun 2025 10:07:51 -0400	[thread overview]
Message-ID: <20250613140801.474264-2-peterx@redhat.com> (raw)
In-Reply-To: <20250613140801.474264-1-peterx@redhat.com>

Dave suggested the HMP output for "info migrate" can not only leverage the
lines but also better grouping:

  https://lore.kernel.org/r/aC4_-nMc7FwsMf9p@gallifrey

I followed Dave's suggestion, and some more modifications on top:

  - Added all elements into the picture

  - Use size_to_str() and drop most of the units: benefit is more friendly
  to most human eyes, bad side effect is lose of details, but that should
  be corner case per my uses, and one can still leverage the QMP interface
  when necessary.

  - Sub-grouping for "Transfers" ("Channels" and "Page Types").

  - Better indentations

Sample output:

(qemu) info migrate
Status:                 postcopy-active
Time (ms):              total=47317, setup=5, down=8
RAM info:
  Throughput (Mbps):    1342.83
  Sizes:                pagesize=4 KiB, total=4.02 GiB
  Transfers:            transferred=1.41 GiB, remain=2.46 GiB
    Channels:           precopy=15.2 MiB, multifd=0 B, postcopy=1.39 GiB
    Page Types:         normal=367713, zero=41195
  Page Rates (pps):     transfer=40900, dirty=4
  Others:               dirty_syncs=2, postcopy_req=57503

Suggested-by: Dr. David Alan Gilbert <dave@treblig.org>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Juraj Marcin <jmarcin@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
---
 migration/migration-hmp-cmds.c | 59 ++++++++++++++++++----------------
 1 file changed, 31 insertions(+), 28 deletions(-)

diff --git a/migration/migration-hmp-cmds.c b/migration/migration-hmp-cmds.c
index e8a563c7d8..367ff6037f 100644
--- a/migration/migration-hmp-cmds.c
+++ b/migration/migration-hmp-cmds.c
@@ -69,7 +69,7 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict)
     }
 
     if (info->has_status) {
-        monitor_printf(mon, "Status: %s",
+        monitor_printf(mon, "Status: \t\t%s",
                        MigrationStatus_str(info->status));
         if (info->status == MIGRATION_STATUS_FAILED && info->error_desc) {
             monitor_printf(mon, " (%s)\n", info->error_desc);
@@ -78,7 +78,7 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict)
         }
 
         if (info->total_time) {
-            monitor_printf(mon, "Time (ms): total=%" PRIu64,
+            monitor_printf(mon, "Time (ms): \t\ttotal=%" PRIu64,
                            info->total_time);
             if (info->has_setup_time) {
                 monitor_printf(mon, ", setup=%" PRIu64,
@@ -110,48 +110,51 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict)
     }
 
     if (info->ram) {
+        g_autofree char *str_psize = size_to_str(info->ram->page_size);
+        g_autofree char *str_total = size_to_str(info->ram->total);
+        g_autofree char *str_transferred = size_to_str(info->ram->transferred);
+        g_autofree char *str_remaining = size_to_str(info->ram->remaining);
+        g_autofree char *str_precopy = size_to_str(info->ram->precopy_bytes);
+        g_autofree char *str_multifd = size_to_str(info->ram->multifd_bytes);
+        g_autofree char *str_postcopy = size_to_str(info->ram->postcopy_bytes);
+
         monitor_printf(mon, "RAM info:\n");
-        monitor_printf(mon, "  Throughput (Mbps): %0.2f\n",
+        monitor_printf(mon, "  Throughput (Mbps): \t%0.2f\n",
                        info->ram->mbps);
-        monitor_printf(mon, "  Sizes (KiB): pagesize=%" PRIu64
-                       ", total=%" PRIu64 ",\n",
-                       info->ram->page_size >> 10,
-                       info->ram->total >> 10);
-        monitor_printf(mon, "    transferred=%" PRIu64
-                       ", remain=%" PRIu64 ",\n",
-                       info->ram->transferred >> 10,
-                       info->ram->remaining >> 10);
-        monitor_printf(mon, "    precopy=%" PRIu64
-                       ", multifd=%" PRIu64
-                       ", postcopy=%" PRIu64,
-                       info->ram->precopy_bytes >> 10,
-                       info->ram->multifd_bytes >> 10,
-                       info->ram->postcopy_bytes >> 10);
+        monitor_printf(mon, "  Sizes: \t\tpagesize=%s, total=%s\n",
+                       str_psize, str_total);
+        monitor_printf(mon, "  Transfers: \t\ttransferred=%s, remain=%s\n",
+                       str_transferred, str_remaining);
+        monitor_printf(mon, "    Channels: \t\tprecopy=%s, "
+                       "multifd=%s, postcopy=%s",
+                       str_precopy, str_multifd, str_postcopy);
 
         if (info->vfio) {
-            monitor_printf(mon, ", vfio=%" PRIu64,
-                           info->vfio->transferred >> 10);
+            g_autofree char *str_vfio = size_to_str(info->vfio->transferred);
+
+            monitor_printf(mon, ", vfio=%s", str_vfio);
         }
         monitor_printf(mon, "\n");
 
-        monitor_printf(mon, "  Pages: normal=%" PRIu64 ", zero=%" PRIu64
-                       ", rate_per_sec=%" PRIu64 "\n",
-                       info->ram->normal,
-                       info->ram->duplicate,
+        monitor_printf(mon, "    Page Types: \tnormal=%" PRIu64
+                       ", zero=%" PRIu64 "\n",
+                       info->ram->normal, info->ram->duplicate);
+        monitor_printf(mon, "  Page Rates (pps): \ttransfer=%" PRIu64,
                        info->ram->pages_per_second);
-        monitor_printf(mon, "  Others: dirty_syncs=%" PRIu64,
-                       info->ram->dirty_sync_count);
-
         if (info->ram->dirty_pages_rate) {
-            monitor_printf(mon, ", dirty_pages_rate=%" PRIu64,
+            monitor_printf(mon, ", dirty=%" PRIu64,
                            info->ram->dirty_pages_rate);
         }
+        monitor_printf(mon, "\n");
+
+        monitor_printf(mon, "  Others: \t\tdirty_syncs=%" PRIu64,
+                       info->ram->dirty_sync_count);
         if (info->ram->postcopy_requests) {
             monitor_printf(mon, ", postcopy_req=%" PRIu64,
                            info->ram->postcopy_requests);
         }
         if (info->ram->downtime_bytes) {
-            monitor_printf(mon, ", downtime_ram=%" PRIu64,
+            monitor_printf(mon, ", downtime_bytes=%" PRIu64,
                            info->ram->downtime_bytes);
         }
         if (info->ram->dirty_sync_missed_zero_copy) {
-- 
2.49.0



  reply	other threads:[~2025-06-13 14:08 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-13 14:07 [PATCH v3 00/11] migration: Some enhancements and cleanups for 10.1 Peter Xu
2025-06-13 14:07 ` Peter Xu [this message]
2025-06-13 14:07 ` [PATCH v3 02/11] migration/hmp: Fix postcopy-blocktime per-vCPU results Peter Xu
2025-06-24 14:28   ` Juraj Marcin
2025-06-13 14:07 ` [PATCH v3 03/11] migration/docs: Move docs for postcopy blocktime feature Peter Xu
2025-06-13 14:07 ` [PATCH v3 04/11] migration/bg-snapshot: Do not check for SKIP in iterator Peter Xu
2025-06-13 14:07 ` [PATCH v3 05/11] migration: Drop save_live_complete_postcopy hook Peter Xu
2025-06-24 14:29   ` Juraj Marcin
2025-06-13 14:07 ` [PATCH v3 06/11] migration: Rename save_live_complete_precopy to save_complete Peter Xu
2025-06-24 14:36   ` Juraj Marcin
2025-06-24 15:41     ` Peter Xu
2025-06-25 11:13       ` Juraj Marcin
2025-06-25 13:38         ` Peter Xu
2025-06-13 14:07 ` [PATCH v3 07/11] migration: qemu_savevm_complete*() helpers Peter Xu
2025-06-24 14:38   ` Juraj Marcin
2025-06-13 14:07 ` [PATCH v3 08/11] migration/ram: One less indent for ram_find_and_save_block() Peter Xu
2025-06-13 14:07 ` [PATCH v3 09/11] migration/ram: Add tracepoints for ram_save_complete() Peter Xu
2025-06-13 14:08 ` [PATCH v3 10/11] migration: Rewrite the migration complete detect logic Peter Xu
2025-06-13 14:08 ` [PATCH v3 11/11] migration/postcopy: Avoid clearing dirty bitmap for postcopy too Peter Xu
2025-06-25 13:38 ` [PATCH v3 00/11] migration: Some enhancements and cleanups for 10.1 Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250613140801.474264-2-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=dave@treblig.org \
    --cc=farosas@suse.de \
    --cc=jmarcin@redhat.com \
    --cc=lizhijian@fujitsu.com \
    --cc=mcasquer@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).