From: Patrick Williams <patrick@stwcx.xyz>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Cédric Le Goater" <clg@kaod.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Jamin Lin" <jamin_lin@aspeedtech.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>
Cc: Patrick Williams <patrick@stwcx.xyz>,
qemu-arm@nongnu.org, qemu-devel@nongnu.org
Subject: [PATCH] hw/arm/aspeed: add Catalina machine type
Date: Wed, 18 Jun 2025 23:43:38 -0400 [thread overview]
Message-ID: <20250619034338.2678536-1-patrick@stwcx.xyz> (raw)
Add the 'catalina-bmc' machine type based on the kernel DTS[1] as of
6.16-rc2. The i2c model is as complete as the current QEMU models
support, but in some cases I substituted devices that are close enough
for present functionality. Strap registers are were verified with
hardware.
This has been tested with an openbmc image built from [2].
[1]: https://github.com/torvalds/linux/blob/v6.16-rc2/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
[2]: https://github.com/openbmc/openbmc/commit/5bc73ec261f981d5e586bda5ac78eb0cbd5f92b0
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
---
hw/arm/Kconfig | 1 +
hw/arm/aspeed.c | 200 ++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 201 insertions(+)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index f543d944c3..6ea86534d5 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -532,6 +532,7 @@ config ASPEED_SOC
select I2C
select DPS310
select PCA9552
+ select PCA9554
select SERIAL_MM
select SMBUS_EEPROM
select PCA954X
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index d0b333646e..b0965ef8a0 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -19,6 +19,7 @@
#include "hw/i2c/i2c_mux_pca954x.h"
#include "hw/i2c/smbus_eeprom.h"
#include "hw/gpio/pca9552.h"
+#include "hw/gpio/pca9554.h"
#include "hw/nvram/eeprom_at24c.h"
#include "hw/sensor/tmp105.h"
#include "hw/misc/led.h"
@@ -1003,6 +1004,180 @@ static void fuji_bmc_i2c_init(AspeedMachineState *bmc)
}
#define TYPE_TMP421 "tmp421"
+#define TYPE_DS1338 "ds1338"
+
+/* Catalina hardware value */
+#define CATALINA_BMC_HW_STRAP1 0x00002002
+#define CATALINA_BMC_HW_STRAP2 0x00000800
+
+#define CATALINA_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB)
+
+static void catalina_bmc_i2c_init(AspeedMachineState *bmc)
+{
+ /* Reference from v6.16-rc2 aspeed-bmc-facebook-catalina.dts */
+
+ AspeedSoCState *soc = bmc->soc;
+ I2CBus *i2c[16] = {};
+ I2CSlave *i2c_mux;
+
+ /* busses 0-15 are all used. */
+ for (int i = 0; i < ARRAY_SIZE(i2c); i++) {
+ i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
+ }
+
+ /* &i2c0 */
+ /* i2c-mux@71 (PCA9546) on i2c0 */
+ i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x71);
+
+ /* i2c-mux@72 (PCA9546) on i2c0 */
+ i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x72);
+
+ /* i2c0mux1ch1 */
+ /* io_expander7 - pca9535@20 */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1),
+ TYPE_PCA9552, 0x20);
+ /* eeprom@50 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB);
+
+ /* i2c-mux@73 (PCA9546) on i2c0 */
+ i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x73);
+
+ /* i2c-mux@75 (PCA9546) on i2c0 */
+ i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x75);
+
+ /* i2c-mux@76 (PCA9546) on i2c0 */
+ i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x76);
+
+ /* i2c0mux4ch1 */
+ /* io_expander8 - pca9535@21 */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1),
+ TYPE_PCA9552, 0x21);
+ /* eeprom@50 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB);
+
+ /* i2c-mux@77 (PCA9546) on i2c0 */
+ i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x77);
+
+
+ /* &i2c1 */
+ /* i2c-mux@70 (PCA9548) on i2c1 */
+ i2c_mux = i2c_slave_create_simple(i2c[1], TYPE_PCA9548, 0x70);
+ /* i2c1mux0ch0 */
+ /* ina238@41 - no model */
+ /* ina238@42 - no model */
+ /* ina238@44 - no model */
+ /* i2c1mux0ch1 */
+ /* ina238@41 - no model */
+ /* ina238@43 - no model */
+ /* i2c1mux0ch4 */
+ /* ltc4287@42 - no model */
+ /* ltc4287@43 - no model */
+
+ /* i2c1mux0ch5 */
+ /* eeprom@54 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 5), 0x54, 8 * KiB);
+ /* tpm75@4f */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 5), TYPE_TMP75, 0x4f);
+
+ /* i2c1mux0ch6 */
+ /* io_expander5 - pca9554@27 */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6),
+ TYPE_PCA9554, 0x27);
+ /* io_expander6 - pca9555@25 */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6),
+ TYPE_PCA9552, 0x25);
+ /* eeprom@51 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x51, 8 * KiB);
+
+ /* i2c1mux0ch7 */
+ /* eeprom@53 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 7), 0x53, 8 * KiB);
+ /* temperature-sensor@4b - tmp75 */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 7), TYPE_TMP75, 0x4b);
+
+ /* &i2c2 */
+ /* io_expander0 - pca9555@20 */
+ i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x20);
+ /* io_expander0 - pca9555@21 */
+ i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x21);
+ /* io_expander0 - pca9555@27 */
+ i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x27);
+ /* eeprom@50 */
+ at24c_eeprom_init(i2c[2], 0x50, 8 * KiB);
+ /* eeprom@51 */
+ at24c_eeprom_init(i2c[2], 0x51, 8 * KiB);
+
+ /* &i2c5 */
+ /* i2c-mux@70 (PCA9548) on i2c5 */
+ i2c_mux = i2c_slave_create_simple(i2c[5], TYPE_PCA9548, 0x70);
+ /* i2c5mux0ch6 */
+ /* eeprom@52 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x52, 8 * KiB);
+ /* i2c5mux0ch7 */
+ /* ina230@40 - no model */
+ /* ina230@41 - no model */
+ /* ina230@44 - no model */
+ /* ina230@45 - no model */
+
+ /* &i2c6 */
+ /* io_expander3 - pca9555@21 */
+ i2c_slave_create_simple(i2c[6], TYPE_PCA9552, 0x21);
+ /* rtc@6f - nct3018y */
+ i2c_slave_create_simple(i2c[6], TYPE_DS1338, 0x6f);
+
+ /* &i2c9 */
+ /* io_expander4 - pca9555@4f */
+ i2c_slave_create_simple(i2c[9], TYPE_PCA9552, 0x4f);
+ /* temperature-sensor@4b - tpm75 */
+ i2c_slave_create_simple(i2c[9], TYPE_TMP75, 0x4b);
+ /* eeprom@50 */
+ at24c_eeprom_init(i2c[9], 0x50, 8 * KiB);
+ /* eeprom@56 */
+ at24c_eeprom_init(i2c[9], 0x56, 8 * KiB);
+
+ /* &i2c10 */
+ /* temperature-sensor@1f - tpm421 */
+ i2c_slave_create_simple(i2c[10], TYPE_TMP421, 0x1f);
+ /* eeprom@50 */
+ at24c_eeprom_init(i2c[10], 0x50, 8 * KiB);
+
+ /* &i2c11 */
+ /* ssif-bmc@10 - no model */
+
+ /* &i2c12 */
+ /* eeprom@50 */
+ at24c_eeprom_init(i2c[12], 0x50, 8 * KiB);
+
+ /* &i2c13 */
+ /* eeprom@50 */
+ at24c_eeprom_init(i2c[13], 0x50, 8 * KiB);
+ /* eeprom@54 */
+ at24c_eeprom_init(i2c[13], 0x54, 256);
+ /* eeprom@55 */
+ at24c_eeprom_init(i2c[13], 0x55, 256);
+ /* eeprom@57 */
+ at24c_eeprom_init(i2c[13], 0x57, 256);
+
+ /* &i2c14 */
+ /* io_expander9 - pca9555@10 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x10);
+ /* io_expander10 - pca9555@11 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x11);
+ /* io_expander11 - pca9555@12 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x12);
+ /* io_expander12 - pca9555@13 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x13);
+ /* io_expander13 - pca9555@14 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x14);
+ /* io_expander14 - pca9555@15 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x15);
+
+ /* &i2c15 */
+ /* temperature-sensor@1f - tmp421 */
+ i2c_slave_create_simple(i2c[15], TYPE_TMP421, 0x1f);
+ /* eeprom@52 */
+ at24c_eeprom_init(i2c[15], 0x52, 8 * KiB);
+}
static void bletchley_bmc_i2c_init(AspeedMachineState *bmc)
{
@@ -1585,6 +1760,27 @@ static void aspeed_machine_bletchley_class_init(ObjectClass *oc,
aspeed_machine_class_init_cpus_defaults(mc);
}
+static void aspeed_machine_catalina_class_init(ObjectClass *oc,
+ const void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Facebook Catalina BMC (Cortex-A7)";
+ amc->soc_name = "ast2600-a3";
+ amc->hw_strap1 = CATALINA_BMC_HW_STRAP1;
+ amc->hw_strap2 = CATALINA_BMC_HW_STRAP2;
+ amc->fmc_model = "w25q01jvq";
+ amc->spi_model = NULL;
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC2_ON;
+ amc->i2c_init = catalina_bmc_i2c_init;
+ mc->auto_create_sdcard = true;
+ mc->default_ram_size = CATALINA_BMC_RAM_SIZE;
+ aspeed_machine_class_init_cpus_defaults(mc);
+ aspeed_machine_ast2600_class_emmc_init(oc);
+}
+
static void fby35_reset(MachineState *state, ResetType type)
{
AspeedMachineState *bmc = ASPEED_MACHINE(state);
@@ -1877,6 +2073,10 @@ static const TypeInfo aspeed_machine_types[] = {
.name = MACHINE_TYPE_NAME("bletchley-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_bletchley_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("catalina-bmc"),
+ .parent = TYPE_ASPEED_MACHINE,
+ .class_init = aspeed_machine_catalina_class_init,
}, {
.name = MACHINE_TYPE_NAME("fby35-bmc"),
.parent = MACHINE_TYPE_NAME("ast2600-evb"),
--
2.49.0
next reply other threads:[~2025-06-19 3:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-19 3:43 Patrick Williams [this message]
2025-06-19 5:49 ` [PATCH] hw/arm/aspeed: add Catalina machine type Cédric Le Goater
2025-06-19 12:31 ` Patrick Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250619034338.2678536-1-patrick@stwcx.xyz \
--to=patrick@stwcx.xyz \
--cc=andrew@codeconstruct.com.au \
--cc=clg@kaod.org \
--cc=jamin_lin@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=leetroy@gmail.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=steven_lee@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).