From: Chinmay Rath <rathc@linux.ibm.com>
To: qemu-devel@nongnu.org, qemu-ppc@nongnu.org, npiggin@gmail.com,
danielhb413@gmail.com
Cc: richard.henderson@linaro.org, harshpb@linux.ibm.com
Subject: [PATCH 4/5] target/ppc: Move remaining floating-point move instructions to decodetree.
Date: Thu, 19 Jun 2025 15:28:39 +0530 [thread overview]
Message-ID: <20250619095840.369351-5-rathc@linux.ibm.com> (raw)
In-Reply-To: <20250619095840.369351-1-rathc@linux.ibm.com>
Move below instructions to decodetree specification:
fcpsgn, fmrg{e, o}w : X-form
The changes were verified by validating that the tcg ops generated by
those instructions remain the same, which were captured with the '-d
in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
---
target/ppc/insn32.decode | 4 ++
target/ppc/translate/fp-impl.c.inc | 65 +++++++++++++-----------------
target/ppc/translate/fp-ops.c.inc | 3 --
3 files changed, 32 insertions(+), 40 deletions(-)
diff --git a/target/ppc/insn32.decode b/target/ppc/insn32.decode
index abbdb9fd82..84f9fcd519 100644
--- a/target/ppc/insn32.decode
+++ b/target/ppc/insn32.decode
@@ -510,6 +510,10 @@ FNEG 111111 ..... ----- ..... 0000101000 . @X_tb_rc
FABS 111111 ..... ----- ..... 0100001000 . @X_tb_rc
FNABS 111111 ..... ----- ..... 0010001000 . @X_tb_rc
+FCPSGN 111111 ..... ..... ..... 0000001000 . @X_rc
+FMRGEW 111111 ..... ..... ..... 1111000110 - @X
+FMRGOW 111111 ..... ..... ..... 1101000110 - @X
+
### Floating-Point Arithmetic Instructions
FADD 111111 ..... ..... ..... ----- 10101 . @A_tab
diff --git a/target/ppc/translate/fp-impl.c.inc b/target/ppc/translate/fp-impl.c.inc
index 2843f71122..28dda15040 100644
--- a/target/ppc/translate/fp-impl.c.inc
+++ b/target/ppc/translate/fp-impl.c.inc
@@ -321,62 +321,53 @@ TRANS(FNABS, do_move_b, 1ULL << 63, tcg_gen_ori_i64);
/* fcpsgn: PowerPC 2.05 specification */
/* XXX: beware that fcpsgn never checks for NaNs nor update FPSCR */
-static void gen_fcpsgn(DisasContext *ctx)
+static bool trans_FCPSGN(DisasContext *ctx, arg_FCPSGN *a)
{
- TCGv_i64 t0;
- TCGv_i64 t1;
- TCGv_i64 t2;
- if (unlikely(!ctx->fpu_enabled)) {
- gen_exception(ctx, POWERPC_EXCP_FPU);
- return;
- }
+ TCGv_i64 t0, t1, t2;
+ REQUIRE_INSNS_FLAGS2(ctx, ISA205);
+ REQUIRE_FPU(ctx);
t0 = tcg_temp_new_i64();
t1 = tcg_temp_new_i64();
t2 = tcg_temp_new_i64();
- get_fpr(t0, rA(ctx->opcode));
- get_fpr(t1, rB(ctx->opcode));
+ get_fpr(t0, a->ra);
+ get_fpr(t1, a->rb);
tcg_gen_deposit_i64(t2, t0, t1, 0, 63);
- set_fpr(rD(ctx->opcode), t2);
- if (unlikely(Rc(ctx->opcode))) {
+ set_fpr(a->rt, t2);
+ if (unlikely(a->rc)) {
gen_set_cr1_from_fpscr(ctx);
}
+ return true;
}
-static void gen_fmrgew(DisasContext *ctx)
+static bool trans_FMRGEW(DisasContext *ctx, arg_FMRGEW *a)
{
- TCGv_i64 b0;
- TCGv_i64 t0;
- TCGv_i64 t1;
- if (unlikely(!ctx->fpu_enabled)) {
- gen_exception(ctx, POWERPC_EXCP_FPU);
- return;
- }
- b0 = tcg_temp_new_i64();
+ TCGv_i64 t0, t1, t2;
+ REQUIRE_INSNS_FLAGS2(ctx, VSX207);
+ REQUIRE_FPU(ctx);
t0 = tcg_temp_new_i64();
t1 = tcg_temp_new_i64();
- get_fpr(t0, rB(ctx->opcode));
- tcg_gen_shri_i64(b0, t0, 32);
- get_fpr(t0, rA(ctx->opcode));
- tcg_gen_deposit_i64(t1, t0, b0, 0, 32);
- set_fpr(rD(ctx->opcode), t1);
+ t2 = tcg_temp_new_i64();
+ get_fpr(t1, a->rb);
+ tcg_gen_shri_i64(t0, t1, 32);
+ get_fpr(t1, a->ra);
+ tcg_gen_deposit_i64(t2, t1, t0, 0, 32);
+ set_fpr(a->rt, t2);
+ return true;
}
-static void gen_fmrgow(DisasContext *ctx)
+static bool trans_FMRGOW(DisasContext *ctx, arg_FMRGOW *a)
{
- TCGv_i64 t0;
- TCGv_i64 t1;
- TCGv_i64 t2;
- if (unlikely(!ctx->fpu_enabled)) {
- gen_exception(ctx, POWERPC_EXCP_FPU);
- return;
- }
+ TCGv_i64 t0, t1, t2;
+ REQUIRE_INSNS_FLAGS2(ctx, VSX207);
+ REQUIRE_FPU(ctx);
t0 = tcg_temp_new_i64();
t1 = tcg_temp_new_i64();
t2 = tcg_temp_new_i64();
- get_fpr(t0, rB(ctx->opcode));
- get_fpr(t1, rA(ctx->opcode));
+ get_fpr(t0, a->rb);
+ get_fpr(t1, a->ra);
tcg_gen_deposit_i64(t2, t0, t1, 32, 32);
- set_fpr(rD(ctx->opcode), t2);
+ set_fpr(a->rt, t2);
+ return true;
}
/*** Floating-Point status & ctrl register ***/
diff --git a/target/ppc/translate/fp-ops.c.inc b/target/ppc/translate/fp-ops.c.inc
index 5053cb135c..9bc9c3a3c3 100644
--- a/target/ppc/translate/fp-ops.c.inc
+++ b/target/ppc/translate/fp-ops.c.inc
@@ -10,9 +10,6 @@ GEN_STXF(stfiw, st32fiw, 0x17, 0x1E, PPC_FLOAT_STFIWX)
GEN_HANDLER_E(stfdepx, 0x1F, 0x1F, 0x16, 0x00000001, PPC_NONE, PPC2_BOOKE206),
GEN_HANDLER_E(stfdpx, 0x1F, 0x17, 0x1C, 0x00200001, PPC_NONE, PPC2_ISA205),
-GEN_HANDLER_E(fcpsgn, 0x3F, 0x08, 0x00, 0x00000000, PPC_NONE, PPC2_ISA205),
-GEN_HANDLER_E(fmrgew, 0x3F, 0x06, 0x1E, 0x00000001, PPC_NONE, PPC2_VSX207),
-GEN_HANDLER_E(fmrgow, 0x3F, 0x06, 0x1A, 0x00000001, PPC_NONE, PPC2_VSX207),
GEN_HANDLER(mcrfs, 0x3F, 0x00, 0x02, 0x0063F801, PPC_FLOAT),
GEN_HANDLER(mtfsb0, 0x3F, 0x06, 0x02, 0x001FF800, PPC_FLOAT),
GEN_HANDLER(mtfsb1, 0x3F, 0x06, 0x01, 0x001FF800, PPC_FLOAT),
--
2.49.0
next prev parent reply other threads:[~2025-06-19 9:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-19 9:58 [PATCH 0/5] target/ppc: Move floating-point instructions to decodetree Chinmay Rath
2025-06-19 9:58 ` [PATCH 1/5] target/ppc: Move floating-point rounding and conversion " Chinmay Rath
2025-06-19 9:58 ` [PATCH 2/5] target/ppc: Move floating-point compare " Chinmay Rath
2025-08-27 7:19 ` Richard Henderson
2025-09-04 12:27 ` Chinmay Rath
2025-09-11 9:29 ` Chinmay Rath
2025-09-15 13:14 ` Richard Henderson
2025-06-19 9:58 ` [PATCH 3/5] target/ppc: Move floating-point move " Chinmay Rath
2025-06-19 9:58 ` Chinmay Rath [this message]
2025-06-19 9:58 ` [PATCH 5/5] MAINTAINERS: Add myself as reviewer for PowerPC TCG CPUs Chinmay Rath
2025-06-19 11:57 ` Cédric Le Goater
2025-06-30 6:41 ` Chinmay Rath
2025-06-30 6:42 ` [PATCH 0/5] target/ppc: Move floating-point instructions to decodetree Chinmay Rath
2025-08-27 7:23 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250619095840.369351-5-rathc@linux.ibm.com \
--to=rathc@linux.ibm.com \
--cc=danielhb413@gmail.com \
--cc=harshpb@linux.ibm.com \
--cc=npiggin@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).