From: anisa.su887@gmail.com
To: qemu-devel@nongnu.org
Cc: Jonathan.Cameron@huawei.com, nifan.cxl@gmail.com,
dave@stgolabs.net, alok.a.tiwari@oracle.com,
linux-cxl@vger.kernel.org, Anisa Su <anisa.su@samsung.com>,
Fan Ni <fan.ni@samsung.com>
Subject: [QEMU PATCH v4 06/10] cxl-mailbox-utils: 0x5602 - FMAPI Set DC Region Config
Date: Thu, 26 Jun 2025 22:23:29 +0000 [thread overview]
Message-ID: <20250626222743.1766404-7-anisa.su887@gmail.com> (raw)
In-Reply-To: <20250626222743.1766404-1-anisa.su887@gmail.com>
From: Anisa Su <anisa.su@samsung.com>
FM DCD Management command 0x5602 implemented per CXL r3.2 Spec Section 7.6.7.6.3
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
---
hw/cxl/cxl-mailbox-utils.c | 86 ++++++++++++++++++++++++++++++++++++
hw/mem/cxl_type3.c | 6 +--
include/hw/cxl/cxl_device.h | 3 ++
include/hw/cxl/cxl_mailbox.h | 6 +++
4 files changed, 98 insertions(+), 3 deletions(-)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 7f0709a27f..69c618383a 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -121,6 +121,7 @@ enum {
FMAPI_DCD_MGMT = 0x56,
#define GET_DCD_INFO 0x0
#define GET_HOST_DC_REGION_CONFIG 0x1
+ #define SET_DC_REGION_CONFIG 0x2
};
/* CCI Message Format CXL r3.1 Figure 7-19 */
@@ -3387,6 +3388,84 @@ static CXLRetCode cmd_fm_get_host_dc_region_config(const struct cxl_cmd *cmd,
return CXL_MBOX_SUCCESS;
}
+/* CXL r3.2 section 7.6.7.6.3: Set Host DC Region Configuration (Opcode 5602) */
+static CXLRetCode cmd_fm_set_dc_region_config(const struct cxl_cmd *cmd,
+ uint8_t *payload_in,
+ size_t len_in,
+ uint8_t *payload_out,
+ size_t *len_out,
+ CXLCCI *cci)
+{
+ struct {
+ uint8_t reg_id;
+ uint8_t rsvd[3];
+ uint64_t block_sz;
+ uint8_t flags;
+ uint8_t rsvd2[3];
+ } QEMU_PACKED *in = (void *)payload_in;
+ CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
+ CXLEventDynamicCapacity dcEvent = {};
+ CXLDCRegion *region = &ct3d->dc.regions[in->reg_id];
+
+ /*
+ * CXL r3.2 7.6.7.6.3: Set DC Region Configuration
+ * This command shall fail with Unsupported when the Sanitize on Release
+ * field does not match the region’s configuration... and the device
+ * does not support reconfiguration of the Sanitize on Release setting.
+ *
+ * Currently not reconfigurable, so always fail if sanitize bit (bit 0)
+ * doesn't match.
+ */
+ if ((in->flags & 0x1) != (region->flags & 0x1)) {
+ return CXL_MBOX_UNSUPPORTED;
+ }
+
+ if (in->reg_id >= DCD_MAX_NUM_REGION) {
+ return CXL_MBOX_UNSUPPORTED;
+ }
+
+ /* Check that no extents are in the region being reconfigured */
+ if (!bitmap_empty(region->blk_bitmap, region->len / region->block_size)) {
+ return CXL_MBOX_UNSUPPORTED;
+ }
+
+ /* Check that new block size is supported */
+ if (!test_bit(BIT((int) log2(in->block_sz)),
+ ®ion->supported_blk_size_bitmask)) {
+ return CXL_MBOX_INVALID_INPUT;
+ }
+
+ /* Return success if new block size == current block size */
+ if (in->block_sz == region->block_size) {
+ return CXL_MBOX_SUCCESS;
+ }
+
+ /* Free bitmap and create new one for new block size. */
+ qemu_mutex_lock(®ion->bitmap_lock);
+ g_free(region->blk_bitmap);
+ region->blk_bitmap = bitmap_new(region->len / in->block_sz);
+ qemu_mutex_unlock(®ion->bitmap_lock);
+ region->block_size = in->block_sz;
+
+ /* Create event record and insert into event log */
+ cxl_assign_event_header(&dcEvent.hdr,
+ &dynamic_capacity_uuid,
+ (1 << CXL_EVENT_TYPE_INFO),
+ sizeof(dcEvent),
+ cxl_device_get_timestamp(&ct3d->cxl_dstate));
+ dcEvent.type = DC_EVENT_REGION_CONFIG_UPDATED;
+ dcEvent.validity_flags = 1;
+ dcEvent.host_id = 0;
+ dcEvent.updated_region_id = in->reg_id;
+
+ if (cxl_event_insert(&ct3d->cxl_dstate,
+ CXL_EVENT_TYPE_DYNAMIC_CAP,
+ (CXLEventRecordRaw *)&dcEvent)) {
+ cxl_event_irq_assert(ct3d);
+ }
+ return CXL_MBOX_SUCCESS;
+}
+
static const struct cxl_cmd cxl_cmd_set[256][256] = {
[INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
cmd_infostat_bg_op_abort, 0, 0 },
@@ -3505,6 +3584,13 @@ static const struct cxl_cmd cxl_cmd_set_fm_dcd[256][256] = {
cmd_fm_get_dcd_info, 0, 0 },
[FMAPI_DCD_MGMT][GET_HOST_DC_REGION_CONFIG] = { "GET_HOST_DC_REGION_CONFIG",
cmd_fm_get_host_dc_region_config, 4, 0 },
+ [FMAPI_DCD_MGMT][SET_DC_REGION_CONFIG] = { "SET_DC_REGION_CONFIG",
+ cmd_fm_set_dc_region_config, 16,
+ (CXL_MBOX_CONFIG_CHANGE_COLD_RESET |
+ CXL_MBOX_CONFIG_CHANGE_CONV_RESET |
+ CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
+ CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
+ CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
};
/*
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index b872a26173..ee554a77be 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -1590,9 +1590,9 @@ void qmp_cxl_inject_correctable_error(const char *path, CxlCorErrorType type,
pcie_aer_inject_error(PCI_DEVICE(obj), &err);
}
-static void cxl_assign_event_header(CXLEventRecordHdr *hdr,
- const QemuUUID *uuid, uint32_t flags,
- uint8_t length, uint64_t timestamp)
+void cxl_assign_event_header(CXLEventRecordHdr *hdr,
+ const QemuUUID *uuid, uint32_t flags,
+ uint8_t length, uint64_t timestamp)
{
st24_le_p(&hdr->flags, flags);
hdr->length = length;
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 6a5025200c..82e3bc1a71 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -729,4 +729,7 @@ void ct3_clear_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
uint64_t len);
bool ct3_test_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
uint64_t len);
+void cxl_assign_event_header(CXLEventRecordHdr *hdr,
+ const QemuUUID *uuid, uint32_t flags,
+ uint8_t length, uint64_t timestamp);
#endif
diff --git a/include/hw/cxl/cxl_mailbox.h b/include/hw/cxl/cxl_mailbox.h
index 9008402d1c..a05d7cb5b7 100644
--- a/include/hw/cxl/cxl_mailbox.h
+++ b/include/hw/cxl/cxl_mailbox.h
@@ -8,6 +8,7 @@
#ifndef CXL_MAILBOX_H
#define CXL_MAILBOX_H
+#define CXL_MBOX_CONFIG_CHANGE_COLD_RESET (1)
#define CXL_MBOX_IMMEDIATE_CONFIG_CHANGE (1 << 1)
#define CXL_MBOX_IMMEDIATE_DATA_CHANGE (1 << 2)
#define CXL_MBOX_IMMEDIATE_POLICY_CHANGE (1 << 3)
@@ -15,5 +16,10 @@
#define CXL_MBOX_SECURITY_STATE_CHANGE (1 << 5)
#define CXL_MBOX_BACKGROUND_OPERATION (1 << 6)
#define CXL_MBOX_BACKGROUND_OPERATION_ABORT (1 << 7)
+#define CXL_MBOX_SECONDARY_MBOX_SUPPORTED (1 << 8)
+#define CXL_MBOX_REQUEST_ABORT_BACKGROUND_OP_SUPPORTED (1 << 9)
+#define CXL_MBOX_CEL_10_TO_11_VALID (1 << 10)
+#define CXL_MBOX_CONFIG_CHANGE_CONV_RESET (1 << 11)
+#define CXL_MBOX_CONFIG_CHANGE_CXL_RESET (1 << 12)
#endif
--
2.47.2
next prev parent reply other threads:[~2025-06-26 22:30 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-26 22:23 [QEMU PATCH v4 00/10] CXL: FMAPI DCD Management Commands 0x5600-0x5605 anisa.su887
2025-06-26 22:23 ` [QEMU PATCH v4 01/10] cxl-mailbox-utils: 0x5600 - FMAPI Get DCD Info anisa.su887
2025-06-26 22:23 ` [QEMU PATCH v4 02/10] cxl/type3: Add dsmas_flags to CXLDCRegion struct anisa.su887
2025-06-26 22:23 ` [QEMU PATCH v4 03/10] cxl-mailbox-utils: 0x5601 - FMAPI Get Host Region Config anisa.su887
2025-06-30 16:36 ` Jonathan Cameron via
2025-06-26 22:23 ` [QEMU PATCH v4 04/10] cxl_events.h: Move definition for dynamic_capacity_uuid and enum for DC event types anisa.su887
2025-06-26 22:23 ` [QEMU PATCH v4 05/10] hw/cxl_type3: Add DC Region bitmap lock anisa.su887
2025-06-26 22:23 ` anisa.su887 [this message]
2025-06-26 22:23 ` [QEMU PATCH v4 07/10] cxl-mailbox-utils: 0x5603 - FMAPI Get DC Region Extent Lists anisa.su887
2025-06-26 22:23 ` [QEMU PATCH v4 08/10] hw/cxl: create helper function to create DC Event Records from extents anisa.su887
2025-07-03 3:58 ` Fan Ni
2025-06-26 22:23 ` [QEMU PATCH v4 09/10] cxl-mailbox-utils: 0x5604 - FMAPI Initiate DC Add anisa.su887
2025-06-30 17:01 ` Jonathan Cameron via
2025-07-03 4:17 ` Fan Ni
2025-07-03 9:05 ` Jonathan Cameron via
2025-06-26 22:23 ` [QEMU PATCH v4 10/10] cxl-mailbox-utils: 0x5605 - FMAPI Initiate DC Release anisa.su887
2025-06-30 17:06 ` Jonathan Cameron via
2025-07-03 4:21 ` Fan Ni
2025-07-03 9:02 ` Jonathan Cameron via
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250626222743.1766404-7-anisa.su887@gmail.com \
--to=anisa.su887@gmail.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alok.a.tiwari@oracle.com \
--cc=anisa.su@samsung.com \
--cc=dave@stgolabs.net \
--cc=fan.ni@samsung.com \
--cc=linux-cxl@vger.kernel.org \
--cc=nifan.cxl@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).