[PATCH 29/82] target/arm: Split out mmuidx.h from cpu.h

[Richard Henderson <richard.henderson@linaro.org>]

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/cpu.h    | 207 +-----------------------------------------
 target/arm/mmuidx.h | 216 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 217 insertions(+), 206 deletions(-)
 create mode 100644 target/arm/mmuidx.h

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 4940bd6a45..da42bd4466 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -33,6 +33,7 @@
 #include "target/arm/multiprocessing.h"
 #include "target/arm/gtimer.h"
 #include "target/arm/cpu-sysregs.h"
+#include "target/arm/mmuidx.h"
 
 #define EXCP_UDEF            1   /* undefined instruction */
 #define EXCP_SWI             2   /* software interrupt */
@@ -2736,212 +2737,6 @@ bool write_cpustate_to_list(ARMCPU *cpu, bool kvm_sync);
 
 #define TYPE_ARM_HOST_CPU "host-" TYPE_ARM_CPU
 
-/* ARM has the following "translation regimes" (as the ARM ARM calls them):
- *
- * If EL3 is 64-bit:
- *  + NonSecure EL1 & 0 stage 1
- *  + NonSecure EL1 & 0 stage 2
- *  + NonSecure EL2
- *  + NonSecure EL2 & 0   (ARMv8.1-VHE)
- *  + Secure EL1 & 0 stage 1
- *  + Secure EL1 & 0 stage 2 (FEAT_SEL2)
- *  + Secure EL2 (FEAT_SEL2)
- *  + Secure EL2 & 0 (FEAT_SEL2)
- *  + Realm EL1 & 0 stage 1 (FEAT_RME)
- *  + Realm EL1 & 0 stage 2 (FEAT_RME)
- *  + Realm EL2 (FEAT_RME)
- *  + EL3
- * If EL3 is 32-bit:
- *  + NonSecure PL1 & 0 stage 1
- *  + NonSecure PL1 & 0 stage 2
- *  + NonSecure PL2
- *  + Secure PL1 & 0
- * (reminder: for 32 bit EL3, Secure PL1 is *EL3*, not EL1.)
- *
- * For QEMU, an mmu_idx is not quite the same as a translation regime because:
- *  1. we need to split the "EL1 & 0" and "EL2 & 0" regimes into two mmu_idxes,
- *     because they may differ in access permissions even if the VA->PA map is
- *     the same
- *  2. we want to cache in our TLB the full VA->IPA->PA lookup for a stage 1+2
- *     translation, which means that we have one mmu_idx that deals with two
- *     concatenated translation regimes [this sort of combined s1+2 TLB is
- *     architecturally permitted]
- *  3. we don't need to allocate an mmu_idx to translations that we won't be
- *     handling via the TLB. The only way to do a stage 1 translation without
- *     the immediate stage 2 translation is via the ATS or AT system insns,
- *     which can be slow-pathed and always do a page table walk.
- *     The only use of stage 2 translations is either as part of an s1+2
- *     lookup or when loading the descriptors during a stage 1 page table walk,
- *     and in both those cases we don't use the TLB.
- *  4. we can also safely fold together the "32 bit EL3" and "64 bit EL3"
- *     translation regimes, because they map reasonably well to each other
- *     and they can't both be active at the same time.
- *  5. we want to be able to use the TLB for accesses done as part of a
- *     stage1 page table walk, rather than having to walk the stage2 page
- *     table over and over.
- *  6. we need separate EL1/EL2 mmu_idx for handling the Privileged Access
- *     Never (PAN) bit within PSTATE.
- *  7. we fold together most secure and non-secure regimes for A-profile,
- *     because there are no banked system registers for aarch64, so the
- *     process of switching between secure and non-secure is
- *     already heavyweight.
- *  8. we cannot fold together Stage 2 Secure and Stage 2 NonSecure,
- *     because both are in use simultaneously for Secure EL2.
- *
- * This gives us the following list of cases:
- *
- * EL0 EL1&0 stage 1+2 (aka NS PL0 PL1&0 stage 1+2)
- * EL1 EL1&0 stage 1+2 (aka NS PL1 PL1&0 stage 1+2)
- * EL1 EL1&0 stage 1+2 +PAN (aka NS PL1 P1&0 stage 1+2 +PAN)
- * EL0 EL2&0
- * EL2 EL2&0
- * EL2 EL2&0 +PAN
- * EL2 (aka NS PL2)
- * EL3 (aka AArch32 S PL1 PL1&0)
- * AArch32 S PL0 PL1&0 (we call this EL30_0)
- * AArch32 S PL1 PL1&0 +PAN (we call this EL30_3_PAN)
- * Stage2 Secure
- * Stage2 NonSecure
- * plus one TLB per Physical address space: S, NS, Realm, Root
- *
- * for a total of 16 different mmu_idx.
- *
- * R profile CPUs have an MPU, but can use the same set of MMU indexes
- * as A profile. They only need to distinguish EL0 and EL1 (and
- * EL2 for cores like the Cortex-R52).
- *
- * M profile CPUs are rather different as they do not have a true MMU.
- * They have the following different MMU indexes:
- *  User
- *  Privileged
- *  User, execution priority negative (ie the MPU HFNMIENA bit may apply)
- *  Privileged, execution priority negative (ditto)
- * If the CPU supports the v8M Security Extension then there are also:
- *  Secure User
- *  Secure Privileged
- *  Secure User, execution priority negative
- *  Secure Privileged, execution priority negative
- *
- * The ARMMMUIdx and the mmu index value used by the core QEMU TLB code
- * are not quite the same -- different CPU types (most notably M profile
- * vs A/R profile) would like to use MMU indexes with different semantics,
- * but since we don't ever need to use all of those in a single CPU we
- * can avoid having to set NB_MMU_MODES to "total number of A profile MMU
- * modes + total number of M profile MMU modes". The lower bits of
- * ARMMMUIdx are the core TLB mmu index, and the higher bits are always
- * the same for any particular CPU.
- * Variables of type ARMMUIdx are always full values, and the core
- * index values are in variables of type 'int'.
- *
- * Our enumeration includes at the end some entries which are not "true"
- * mmu_idx values in that they don't have corresponding TLBs and are only
- * valid for doing slow path page table walks.
- *
- * The constant names here are patterned after the general style of the names
- * of the AT/ATS operations.
- * The values used are carefully arranged to make mmu_idx => EL lookup easy.
- * For M profile we arrange them to have a bit for priv, a bit for negpri
- * and a bit for secure.
- */
-#define ARM_MMU_IDX_A     0x10  /* A profile */
-#define ARM_MMU_IDX_NOTLB 0x20  /* does not have a TLB */
-#define ARM_MMU_IDX_M     0x40  /* M profile */
-
-/* Meanings of the bits for M profile mmu idx values */
-#define ARM_MMU_IDX_M_PRIV   0x1
-#define ARM_MMU_IDX_M_NEGPRI 0x2
-#define ARM_MMU_IDX_M_S      0x4  /* Secure */
-
-#define ARM_MMU_IDX_TYPE_MASK \
-    (ARM_MMU_IDX_A | ARM_MMU_IDX_M | ARM_MMU_IDX_NOTLB)
-#define ARM_MMU_IDX_COREIDX_MASK 0xf
-
-typedef enum ARMMMUIdx {
-    /*
-     * A-profile.
-     */
-    ARMMMUIdx_E10_0     = 0 | ARM_MMU_IDX_A,
-    ARMMMUIdx_E20_0     = 1 | ARM_MMU_IDX_A,
-    ARMMMUIdx_E10_1     = 2 | ARM_MMU_IDX_A,
-    ARMMMUIdx_E20_2     = 3 | ARM_MMU_IDX_A,
-    ARMMMUIdx_E10_1_PAN = 4 | ARM_MMU_IDX_A,
-    ARMMMUIdx_E20_2_PAN = 5 | ARM_MMU_IDX_A,
-    ARMMMUIdx_E2        = 6 | ARM_MMU_IDX_A,
-    ARMMMUIdx_E3        = 7 | ARM_MMU_IDX_A,
-    ARMMMUIdx_E30_0     = 8 | ARM_MMU_IDX_A,
-    ARMMMUIdx_E30_3_PAN = 9 | ARM_MMU_IDX_A,
-
-    /*
-     * Used for second stage of an S12 page table walk, or for descriptor
-     * loads during first stage of an S1 page table walk.  Note that both
-     * are in use simultaneously for SecureEL2: the security state for
-     * the S2 ptw is selected by the NS bit from the S1 ptw.
-     */
-    ARMMMUIdx_Stage2_S  = 10 | ARM_MMU_IDX_A,
-    ARMMMUIdx_Stage2    = 11 | ARM_MMU_IDX_A,
-
-    /* TLBs with 1-1 mapping to the physical address spaces. */
-    ARMMMUIdx_Phys_S     = 12 | ARM_MMU_IDX_A,
-    ARMMMUIdx_Phys_NS    = 13 | ARM_MMU_IDX_A,
-    ARMMMUIdx_Phys_Root  = 14 | ARM_MMU_IDX_A,
-    ARMMMUIdx_Phys_Realm = 15 | ARM_MMU_IDX_A,
-
-    /*
-     * These are not allocated TLBs and are used only for AT system
-     * instructions or for the first stage of an S12 page table walk.
-     */
-    ARMMMUIdx_Stage1_E0 = 0 | ARM_MMU_IDX_NOTLB,
-    ARMMMUIdx_Stage1_E1 = 1 | ARM_MMU_IDX_NOTLB,
-    ARMMMUIdx_Stage1_E1_PAN = 2 | ARM_MMU_IDX_NOTLB,
-
-    /*
-     * M-profile.
-     */
-    ARMMMUIdx_MUser = ARM_MMU_IDX_M,
-    ARMMMUIdx_MPriv = ARM_MMU_IDX_M | ARM_MMU_IDX_M_PRIV,
-    ARMMMUIdx_MUserNegPri = ARMMMUIdx_MUser | ARM_MMU_IDX_M_NEGPRI,
-    ARMMMUIdx_MPrivNegPri = ARMMMUIdx_MPriv | ARM_MMU_IDX_M_NEGPRI,
-    ARMMMUIdx_MSUser = ARMMMUIdx_MUser | ARM_MMU_IDX_M_S,
-    ARMMMUIdx_MSPriv = ARMMMUIdx_MPriv | ARM_MMU_IDX_M_S,
-    ARMMMUIdx_MSUserNegPri = ARMMMUIdx_MUserNegPri | ARM_MMU_IDX_M_S,
-    ARMMMUIdx_MSPrivNegPri = ARMMMUIdx_MPrivNegPri | ARM_MMU_IDX_M_S,
-} ARMMMUIdx;
-
-/*
- * Bit macros for the core-mmu-index values for each index,
- * for use when calling tlb_flush_by_mmuidx() and friends.
- */
-#define TO_CORE_BIT(NAME) \
-    ARMMMUIdxBit_##NAME = 1 << (ARMMMUIdx_##NAME & ARM_MMU_IDX_COREIDX_MASK)
-
-typedef enum ARMMMUIdxBit {
-    TO_CORE_BIT(E10_0),
-    TO_CORE_BIT(E20_0),
-    TO_CORE_BIT(E10_1),
-    TO_CORE_BIT(E10_1_PAN),
-    TO_CORE_BIT(E2),
-    TO_CORE_BIT(E20_2),
-    TO_CORE_BIT(E20_2_PAN),
-    TO_CORE_BIT(E3),
-    TO_CORE_BIT(E30_0),
-    TO_CORE_BIT(E30_3_PAN),
-    TO_CORE_BIT(Stage2),
-    TO_CORE_BIT(Stage2_S),
-
-    TO_CORE_BIT(MUser),
-    TO_CORE_BIT(MPriv),
-    TO_CORE_BIT(MUserNegPri),
-    TO_CORE_BIT(MPrivNegPri),
-    TO_CORE_BIT(MSUser),
-    TO_CORE_BIT(MSPriv),
-    TO_CORE_BIT(MSUserNegPri),
-    TO_CORE_BIT(MSPrivNegPri),
-} ARMMMUIdxBit;
-
-#undef TO_CORE_BIT
-
-#define MMU_USER_IDX 0
-
 /* Indexes used when registering address spaces with cpu_address_space_init */
 typedef enum ARMASIdx {
     ARMASIdx_NS = 0,
diff --git a/target/arm/mmuidx.h b/target/arm/mmuidx.h
new file mode 100644
index 0000000000..5b9b4bc84f
--- /dev/null
+++ b/target/arm/mmuidx.h
@@ -0,0 +1,216 @@
+/*
+ * QEMU Arm software mmu index definitions
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef TARGET_ARM_MMUIDX_H
+#define TARGET_ARM_MMUIDX_H
+
+/*
+ * Arm has the following "translation regimes" (as the Arm ARM calls them):
+ *
+ * If EL3 is 64-bit:
+ *  + NonSecure EL1 & 0 stage 1
+ *  + NonSecure EL1 & 0 stage 2
+ *  + NonSecure EL2
+ *  + NonSecure EL2 & 0   (ARMv8.1-VHE)
+ *  + Secure EL1 & 0 stage 1
+ *  + Secure EL1 & 0 stage 2 (FEAT_SEL2)
+ *  + Secure EL2 (FEAT_SEL2)
+ *  + Secure EL2 & 0 (FEAT_SEL2)
+ *  + Realm EL1 & 0 stage 1 (FEAT_RME)
+ *  + Realm EL1 & 0 stage 2 (FEAT_RME)
+ *  + Realm EL2 (FEAT_RME)
+ *  + EL3
+ * If EL3 is 32-bit:
+ *  + NonSecure PL1 & 0 stage 1
+ *  + NonSecure PL1 & 0 stage 2
+ *  + NonSecure PL2
+ *  + Secure PL1 & 0
+ * (reminder: for 32 bit EL3, Secure PL1 is *EL3*, not EL1.)
+ *
+ * For QEMU, an mmu_idx is not quite the same as a translation regime because:
+ *  1. we need to split the "EL1 & 0" and "EL2 & 0" regimes into two mmu_idxes,
+ *     because they may differ in access permissions even if the VA->PA map is
+ *     the same
+ *  2. we want to cache in our TLB the full VA->IPA->PA lookup for a stage 1+2
+ *     translation, which means that we have one mmu_idx that deals with two
+ *     concatenated translation regimes [this sort of combined s1+2 TLB is
+ *     architecturally permitted]
+ *  3. we don't need to allocate an mmu_idx to translations that we won't be
+ *     handling via the TLB. The only way to do a stage 1 translation without
+ *     the immediate stage 2 translation is via the ATS or AT system insns,
+ *     which can be slow-pathed and always do a page table walk.
+ *     The only use of stage 2 translations is either as part of an s1+2
+ *     lookup or when loading the descriptors during a stage 1 page table walk,
+ *     and in both those cases we don't use the TLB.
+ *  4. we can also safely fold together the "32 bit EL3" and "64 bit EL3"
+ *     translation regimes, because they map reasonably well to each other
+ *     and they can't both be active at the same time.
+ *  5. we want to be able to use the TLB for accesses done as part of a
+ *     stage1 page table walk, rather than having to walk the stage2 page
+ *     table over and over.
+ *  6. we need separate EL1/EL2 mmu_idx for handling the Privileged Access
+ *     Never (PAN) bit within PSTATE.
+ *  7. we fold together most secure and non-secure regimes for A-profile,
+ *     because there are no banked system registers for aarch64, so the
+ *     process of switching between secure and non-secure is
+ *     already heavyweight.
+ *  8. we cannot fold together Stage 2 Secure and Stage 2 NonSecure,
+ *     because both are in use simultaneously for Secure EL2.
+ *
+ * This gives us the following list of cases:
+ *
+ * EL0 EL1&0 stage 1+2 (aka NS PL0 PL1&0 stage 1+2)
+ * EL1 EL1&0 stage 1+2 (aka NS PL1 PL1&0 stage 1+2)
+ * EL1 EL1&0 stage 1+2 +PAN (aka NS PL1 P1&0 stage 1+2 +PAN)
+ * EL0 EL2&0
+ * EL2 EL2&0
+ * EL2 EL2&0 +PAN
+ * EL2 (aka NS PL2)
+ * EL3 (aka AArch32 S PL1 PL1&0)
+ * AArch32 S PL0 PL1&0 (we call this EL30_0)
+ * AArch32 S PL1 PL1&0 +PAN (we call this EL30_3_PAN)
+ * Stage2 Secure
+ * Stage2 NonSecure
+ * plus one TLB per Physical address space: S, NS, Realm, Root
+ *
+ * for a total of 16 different mmu_idx.
+ *
+ * R profile CPUs have an MPU, but can use the same set of MMU indexes
+ * as A profile. They only need to distinguish EL0 and EL1 (and
+ * EL2 for cores like the Cortex-R52).
+ *
+ * M profile CPUs are rather different as they do not have a true MMU.
+ * They have the following different MMU indexes:
+ *  User
+ *  Privileged
+ *  User, execution priority negative (ie the MPU HFNMIENA bit may apply)
+ *  Privileged, execution priority negative (ditto)
+ * If the CPU supports the v8M Security Extension then there are also:
+ *  Secure User
+ *  Secure Privileged
+ *  Secure User, execution priority negative
+ *  Secure Privileged, execution priority negative
+ *
+ * The ARMMMUIdx and the mmu index value used by the core QEMU TLB code
+ * are not quite the same -- different CPU types (most notably M profile
+ * vs A/R profile) would like to use MMU indexes with different semantics,
+ * but since we don't ever need to use all of those in a single CPU we
+ * can avoid having to set NB_MMU_MODES to "total number of A profile MMU
+ * modes + total number of M profile MMU modes". The lower bits of
+ * ARMMMUIdx are the core TLB mmu index, and the higher bits are always
+ * the same for any particular CPU.
+ * Variables of type ARMMUIdx are always full values, and the core
+ * index values are in variables of type 'int'.
+ *
+ * Our enumeration includes at the end some entries which are not "true"
+ * mmu_idx values in that they don't have corresponding TLBs and are only
+ * valid for doing slow path page table walks.
+ *
+ * The constant names here are patterned after the general style of the names
+ * of the AT/ATS operations.
+ * The values used are carefully arranged to make mmu_idx => EL lookup easy.
+ * For M profile we arrange them to have a bit for priv, a bit for negpri
+ * and a bit for secure.
+ */
+#define ARM_MMU_IDX_A     0x10  /* A profile */
+#define ARM_MMU_IDX_NOTLB 0x20  /* does not have a TLB */
+#define ARM_MMU_IDX_M     0x40  /* M profile */
+
+/* Meanings of the bits for M profile mmu idx values */
+#define ARM_MMU_IDX_M_PRIV   0x1
+#define ARM_MMU_IDX_M_NEGPRI 0x2
+#define ARM_MMU_IDX_M_S      0x4  /* Secure */
+
+#define ARM_MMU_IDX_TYPE_MASK \
+    (ARM_MMU_IDX_A | ARM_MMU_IDX_M | ARM_MMU_IDX_NOTLB)
+#define ARM_MMU_IDX_COREIDX_MASK 0xf
+
+typedef enum ARMMMUIdx {
+    /*
+     * A-profile.
+     */
+    ARMMMUIdx_E10_0     = 0 | ARM_MMU_IDX_A,
+    ARMMMUIdx_E20_0     = 1 | ARM_MMU_IDX_A,
+    ARMMMUIdx_E10_1     = 2 | ARM_MMU_IDX_A,
+    ARMMMUIdx_E20_2     = 3 | ARM_MMU_IDX_A,
+    ARMMMUIdx_E10_1_PAN = 4 | ARM_MMU_IDX_A,
+    ARMMMUIdx_E20_2_PAN = 5 | ARM_MMU_IDX_A,
+    ARMMMUIdx_E2        = 6 | ARM_MMU_IDX_A,
+    ARMMMUIdx_E3        = 7 | ARM_MMU_IDX_A,
+    ARMMMUIdx_E30_0     = 8 | ARM_MMU_IDX_A,
+    ARMMMUIdx_E30_3_PAN = 9 | ARM_MMU_IDX_A,
+
+    /*
+     * Used for second stage of an S12 page table walk, or for descriptor
+     * loads during first stage of an S1 page table walk.  Note that both
+     * are in use simultaneously for SecureEL2: the security state for
+     * the S2 ptw is selected by the NS bit from the S1 ptw.
+     */
+    ARMMMUIdx_Stage2_S  = 10 | ARM_MMU_IDX_A,
+    ARMMMUIdx_Stage2    = 11 | ARM_MMU_IDX_A,
+
+    /* TLBs with 1-1 mapping to the physical address spaces. */
+    ARMMMUIdx_Phys_S     = 12 | ARM_MMU_IDX_A,
+    ARMMMUIdx_Phys_NS    = 13 | ARM_MMU_IDX_A,
+    ARMMMUIdx_Phys_Root  = 14 | ARM_MMU_IDX_A,
+    ARMMMUIdx_Phys_Realm = 15 | ARM_MMU_IDX_A,
+
+    /*
+     * These are not allocated TLBs and are used only for AT system
+     * instructions or for the first stage of an S12 page table walk.
+     */
+    ARMMMUIdx_Stage1_E0 = 0 | ARM_MMU_IDX_NOTLB,
+    ARMMMUIdx_Stage1_E1 = 1 | ARM_MMU_IDX_NOTLB,
+    ARMMMUIdx_Stage1_E1_PAN = 2 | ARM_MMU_IDX_NOTLB,
+
+    /*
+     * M-profile.
+     */
+    ARMMMUIdx_MUser = ARM_MMU_IDX_M,
+    ARMMMUIdx_MPriv = ARM_MMU_IDX_M | ARM_MMU_IDX_M_PRIV,
+    ARMMMUIdx_MUserNegPri = ARMMMUIdx_MUser | ARM_MMU_IDX_M_NEGPRI,
+    ARMMMUIdx_MPrivNegPri = ARMMMUIdx_MPriv | ARM_MMU_IDX_M_NEGPRI,
+    ARMMMUIdx_MSUser = ARMMMUIdx_MUser | ARM_MMU_IDX_M_S,
+    ARMMMUIdx_MSPriv = ARMMMUIdx_MPriv | ARM_MMU_IDX_M_S,
+    ARMMMUIdx_MSUserNegPri = ARMMMUIdx_MUserNegPri | ARM_MMU_IDX_M_S,
+    ARMMMUIdx_MSPrivNegPri = ARMMMUIdx_MPrivNegPri | ARM_MMU_IDX_M_S,
+} ARMMMUIdx;
+
+/*
+ * Bit macros for the core-mmu-index values for each index,
+ * for use when calling tlb_flush_by_mmuidx() and friends.
+ */
+#define TO_CORE_BIT(NAME) \
+    ARMMMUIdxBit_##NAME = 1 << (ARMMMUIdx_##NAME & ARM_MMU_IDX_COREIDX_MASK)
+
+typedef enum ARMMMUIdxBit {
+    TO_CORE_BIT(E10_0),
+    TO_CORE_BIT(E20_0),
+    TO_CORE_BIT(E10_1),
+    TO_CORE_BIT(E10_1_PAN),
+    TO_CORE_BIT(E2),
+    TO_CORE_BIT(E20_2),
+    TO_CORE_BIT(E20_2_PAN),
+    TO_CORE_BIT(E3),
+    TO_CORE_BIT(E30_0),
+    TO_CORE_BIT(E30_3_PAN),
+    TO_CORE_BIT(Stage2),
+    TO_CORE_BIT(Stage2_S),
+
+    TO_CORE_BIT(MUser),
+    TO_CORE_BIT(MPriv),
+    TO_CORE_BIT(MUserNegPri),
+    TO_CORE_BIT(MPrivNegPri),
+    TO_CORE_BIT(MSUser),
+    TO_CORE_BIT(MSPriv),
+    TO_CORE_BIT(MSUserNegPri),
+    TO_CORE_BIT(MSPrivNegPri),
+} ARMMMUIdxBit;
+
+#undef TO_CORE_BIT
+
+#define MMU_USER_IDX 0
+
+#endif /* TARGET_ARM_MMUIDX_H */
-- 
2.43.0