From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org, Pierrick Bouvier <pierrick.bouvier@linaro.org>
Subject: [PATCH v4 07/84] target/arm: Introduce get_phys_addr_for_at
Date: Sat, 30 Aug 2025 15:40:11 +1000 [thread overview]
Message-ID: <20250830054128.448363-8-richard.henderson@linaro.org> (raw)
In-Reply-To: <20250830054128.448363-1-richard.henderson@linaro.org>
Rename get_phys_addr_with_space_nogpc for its only
caller, do_ats_write. Drop the MemOp memop argument
as it doesn't make sense in the new context. Replace
the access_type parameter with prot_check.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/internals.h | 18 +++++++-----------
target/arm/ptw.c | 21 ++++++++++++++-------
target/arm/tcg/cpregs-at.c | 11 ++---------
3 files changed, 23 insertions(+), 27 deletions(-)
diff --git a/target/arm/internals.h b/target/arm/internals.h
index 899242e572..8782594b77 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -1602,25 +1602,21 @@ bool get_phys_addr(CPUARMState *env, vaddr address,
__attribute__((nonnull));
/**
- * get_phys_addr_with_space_nogpc: get the physical address for a virtual
- * address
+ * get_phys_addr_for_at:
* @env: CPUARMState
* @address: virtual address to get physical address for
- * @access_type: 0 for read, 1 for write, 2 for execute
- * @memop: memory operation feeding this access, or 0 for none
+ * @prot_check: PAGE_{READ,WRITE,EXEC}, or 0
* @mmu_idx: MMU index indicating required translation regime
* @space: security space for the access
* @result: set on translation success.
* @fi: set to fault info if the translation fails
*
- * Similar to get_phys_addr, but use the given security space and don't perform
- * a Granule Protection Check on the resulting address.
+ * Similar to get_phys_addr, but for use by AccessType_AT, i.e.
+ * system instructions for address translation.
*/
-bool get_phys_addr_with_space_nogpc(CPUARMState *env, vaddr address,
- MMUAccessType access_type, MemOp memop,
- ARMMMUIdx mmu_idx, ARMSecuritySpace space,
- GetPhysAddrResult *result,
- ARMMMUFaultInfo *fi)
+bool get_phys_addr_for_at(CPUARMState *env, vaddr address, unsigned prot_check,
+ ARMMMUIdx mmu_idx, ARMSecuritySpace space,
+ GetPhysAddrResult *result, ARMMMUFaultInfo *fi)
__attribute__((nonnull));
bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
diff --git a/target/arm/ptw.c b/target/arm/ptw.c
index 5d85610de2..8925c9a610 100644
--- a/target/arm/ptw.c
+++ b/target/arm/ptw.c
@@ -3545,18 +3545,25 @@ static bool get_phys_addr_gpc(CPUARMState *env, S1Translate *ptw,
return false;
}
-bool get_phys_addr_with_space_nogpc(CPUARMState *env, vaddr address,
- MMUAccessType access_type, MemOp memop,
- ARMMMUIdx mmu_idx, ARMSecuritySpace space,
- GetPhysAddrResult *result,
- ARMMMUFaultInfo *fi)
+bool get_phys_addr_for_at(CPUARMState *env, vaddr address,
+ unsigned prot_check, ARMMMUIdx mmu_idx,
+ ARMSecuritySpace space, GetPhysAddrResult *result,
+ ARMMMUFaultInfo *fi)
{
S1Translate ptw = {
.in_mmu_idx = mmu_idx,
.in_space = space,
+ .in_prot_check = prot_check,
};
- return get_phys_addr_nogpc(env, &ptw, address, access_type,
- memop, result, fi);
+ /*
+ * I_MXTJT: Granule protection checks are not performed on the final
+ * address of a successful translation. This is a translation not a
+ * memory reference, so MMU_DATA_LOAD is arbitrary (the exact protection
+ * check is handled or bypassed by .in_prot_check) and "memop = MO_8"
+ * bypasses any alignment check.
+ */
+ return get_phys_addr_nogpc(env, &ptw, address,
+ MMU_DATA_LOAD, MO_8, result, fi);
}
static ARMSecuritySpace
diff --git a/target/arm/tcg/cpregs-at.c b/target/arm/tcg/cpregs-at.c
index 398a61d398..2ff0b3e76f 100644
--- a/target/arm/tcg/cpregs-at.c
+++ b/target/arm/tcg/cpregs-at.c
@@ -27,19 +27,12 @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value,
MMUAccessType access_type, ARMMMUIdx mmu_idx,
ARMSecuritySpace ss)
{
- bool ret;
uint64_t par64;
bool format64 = false;
ARMMMUFaultInfo fi = {};
GetPhysAddrResult res = {};
-
- /*
- * I_MXTJT: Granule protection checks are not performed on the final
- * address of a successful translation. This is a translation not a
- * memory reference, so "memop = none = 0".
- */
- ret = get_phys_addr_with_space_nogpc(env, value, access_type, 0,
- mmu_idx, ss, &res, &fi);
+ bool ret = get_phys_addr_for_at(env, value, 1 << access_type,
+ mmu_idx, ss, &res, &fi);
/*
* ATS operations only do S1 or S1+S2 translations, so we never
--
2.43.0
next prev parent reply other threads:[~2025-08-30 18:16 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-30 5:40 [PATCH v4 00/84] target/arm: Implement FEAT_GCS Richard Henderson
2025-08-30 5:40 ` [PATCH v4 01/84] linux-user/aarch64: Split out signal_for_exception Richard Henderson
2025-08-30 5:40 ` [PATCH v4 02/84] linux-user/aarch64: Check syndrome for EXCP_UDEF Richard Henderson
2025-08-30 5:40 ` [PATCH v4 03/84] linux-user/aarch64: Generate ESR signal records Richard Henderson
2025-08-30 5:40 ` [PATCH v4 04/84] target/arm: Add prot_check parameter to pmsav8_mpu_lookup Richard Henderson
2025-08-30 5:40 ` [PATCH v4 05/84] target/arm: Add in_prot_check to S1Translate Richard Henderson
2025-08-30 5:40 ` [PATCH v4 06/84] target/arm: Skip permission check from arm_cpu_get_phys_page_attrs_debug Richard Henderson
2025-08-30 5:40 ` Richard Henderson [this message]
2025-08-30 5:40 ` [PATCH v4 08/84] target/arm: Skip AF and DB updates for AccessType_AT Richard Henderson
2025-08-30 5:40 ` [PATCH v4 09/84] target/arm: Add prot_check parameter to do_ats_write Richard Henderson
2025-08-30 5:40 ` [PATCH v4 10/84] target/arm: Fill in HFG[RWI]TR_EL2 bits for Arm v9.5 Richard Henderson
2025-08-30 5:40 ` [PATCH v4 11/84] target/arm: Remove outdated comment for ZCR_EL12 Richard Henderson
2025-08-30 5:40 ` [PATCH v4 12/84] target/arm: Implement FEAT_ATS1A Richard Henderson
2025-08-30 5:40 ` [PATCH v4 13/84] target/arm: Add isar feature test for FEAT_S1PIE, FEAT_S2PIE Richard Henderson
2025-08-30 5:40 ` [PATCH v4 14/84] target/arm: Enable TCR2_ELx.PIE Richard Henderson
2025-08-30 5:40 ` [PATCH v4 15/84] target/arm: Implement PIR_ELx, PIRE0_ELx, S2PIR_EL2 registers Richard Henderson
2025-08-30 5:40 ` [PATCH v4 16/84] target/arm: Force HPD for stage2 translations Richard Henderson
2025-08-30 5:40 ` [PATCH v4 17/84] target/arm: Cache NV1 early in get_phys_addr_lpae Richard Henderson
2025-08-30 5:40 ` [PATCH v4 18/84] target/arm: Populate PIE in aa64_va_parameters Richard Henderson
2025-08-30 5:40 ` [PATCH v4 19/84] target/arm: Implement get_S1prot_indirect Richard Henderson
2025-08-30 5:40 ` [PATCH v4 20/84] target/arm: Implement get_S2prot_indirect Richard Henderson
2025-08-30 5:40 ` [PATCH v4 21/84] target/arm: Do not migrate env->exception Richard Henderson
2025-09-08 14:40 ` Peter Maydell
2025-09-15 17:42 ` Richard Henderson
2025-08-30 5:40 ` [PATCH v4 22/84] target/arm: Expand CPUARMState.exception.syndrome to 64 bits Richard Henderson
2025-08-30 5:40 ` [PATCH v4 23/84] target/arm: Expand syndrome parameter to raise_exception* Richard Henderson
2025-08-30 5:40 ` [PATCH v4 24/84] target/arm: Implement dirtybit check for PIE Richard Henderson
2025-08-30 5:40 ` [PATCH v4 25/84] target/arm: Enable FEAT_S1PIE and FEAT_S2PIE on -cpu max Richard Henderson
2025-08-30 5:40 ` [PATCH v4 26/84] include/hw/core/cpu: Introduce MMUIdxMap Richard Henderson
2025-09-08 14:42 ` Peter Maydell
2025-08-30 5:40 ` [PATCH v4 27/84] include/hw/core/cpu: Introduce cpu_tlb_fast Richard Henderson
2025-08-30 5:40 ` [PATCH v4 28/84] include/hw/core/cpu: Invert the indexing into CPUTLBDescFast Richard Henderson
2025-08-30 5:40 ` [PATCH v4 29/84] target/hppa: Adjust mmu indexes to begin with 0 Richard Henderson
2025-08-30 5:40 ` [PATCH v4 30/84] include/exec/memopidx: Adjust for 32 mmu indexes Richard Henderson
2025-08-30 5:40 ` [PATCH v4 31/84] include/hw/core/cpu: Widen MMUIdxMap Richard Henderson
2025-08-30 5:40 ` [PATCH v4 32/84] target/arm: Split out mmuidx.h from cpu.h Richard Henderson
2025-08-30 5:40 ` [PATCH v4 33/84] target/arm: Convert arm_mmu_idx_to_el from switch to table Richard Henderson
2025-08-30 5:40 ` [PATCH v4 34/84] target/arm: Remove unused env argument from regime_el Richard Henderson
2025-08-30 5:40 ` [PATCH v4 35/84] target/arm: Convert regime_el from switch to table Richard Henderson
2025-08-30 5:40 ` [PATCH v4 36/84] target/arm: Convert regime_has_2_ranges " Richard Henderson
2025-08-30 5:40 ` [PATCH v4 37/84] target/arm: Remove unused env argument from regime_is_pan Richard Henderson
2025-08-30 5:40 ` [PATCH v4 38/84] target/arm: Convert regime_is_pan from switch to table Richard Henderson
2025-08-30 5:40 ` [PATCH v4 39/84] target/arm: Remove unused env argument from regime_is_user Richard Henderson
2025-08-30 5:40 ` [PATCH v4 40/84] target/arm: Convert regime_is_user from switch to table Richard Henderson
2025-08-30 5:40 ` [PATCH v4 41/84] target/arm: Convert arm_mmu_idx_is_stage1_of_2 " Richard Henderson
2025-08-30 5:40 ` [PATCH v4 42/84] target/arm: Convert regime_is_stage2 " Richard Henderson
2025-08-30 5:40 ` [PATCH v4 43/84] target/arm: Introduce mmu indexes for GCS Richard Henderson
2025-08-30 5:40 ` [PATCH v4 44/84] target/arm: Introduce regime_to_gcs Richard Henderson
2025-08-30 5:40 ` [PATCH v4 45/84] target/arm: Support page protections for GCS mmu indexes Richard Henderson
2025-08-30 5:40 ` [PATCH v4 46/84] target/arm: Implement gcs bit for data abort Richard Henderson
2025-08-30 5:40 ` [PATCH v4 47/84] target/arm: Add GCS cpregs Richard Henderson
2025-08-30 5:40 ` [PATCH v4 48/84] target/arm: Add GCS enable and trap levels to DisasContext Richard Henderson
2025-08-30 5:40 ` [PATCH v4 49/84] target/arm: Implement FEAT_CHK Richard Henderson
2025-08-30 5:40 ` [PATCH v4 50/84] target/arm: Expand pstate to 64 bits Richard Henderson
2025-09-08 15:57 ` Peter Maydell
2025-09-15 19:45 ` Richard Henderson
2025-08-30 5:40 ` [PATCH v4 51/84] target/arm: Add syndrome data for EC_GCS Richard Henderson
2025-08-30 5:40 ` [PATCH v4 52/84] target/arm: Implement EXLOCKException for ELR_ELx and SPSR_ELx Richard Henderson
2025-09-09 13:14 ` Peter Maydell
2025-08-30 5:40 ` [PATCH v4 53/84] target/arm: Split {arm,core}_user_mem_index Richard Henderson
2025-09-09 13:21 ` Peter Maydell
2025-08-30 5:40 ` [PATCH v4 54/84] target/arm: Introduce delay_exception{_el} Richard Henderson
2025-08-30 5:40 ` [PATCH v4 55/84] target/arm: Emit HSTR trap exception out of line Richard Henderson
2025-09-09 13:33 ` Peter Maydell
2025-09-16 1:00 ` Richard Henderson
2025-08-30 5:41 ` [PATCH v4 56/84] target/arm: Emit v7m LTPSIZE " Richard Henderson
2025-08-30 5:41 ` [PATCH v4 57/84] target/arm: Implement GCSSTR, GCSSTTR Richard Henderson
2025-08-30 5:41 ` [PATCH v4 58/84] target/arm: Implement GCSB Richard Henderson
2025-08-30 5:41 ` [PATCH v4 59/84] target/arm: Implement GCSPUSHM Richard Henderson
2025-08-30 5:41 ` [PATCH v4 60/84] target/arm: Implement GCSPOPM Richard Henderson
2025-08-30 5:41 ` [PATCH v4 61/84] target/arm: Implement GCSPUSHX Richard Henderson
2025-08-30 5:41 ` [PATCH v4 62/84] target/arm: Implement GCSPOPX Richard Henderson
2025-08-30 5:41 ` [PATCH v4 63/84] target/arm: Implement GCSPOPCX Richard Henderson
2025-08-30 5:41 ` [PATCH v4 64/84] target/arm: Implement GCSSS1 Richard Henderson
2025-08-30 5:41 ` [PATCH v4 65/84] target/arm: Implement GCSSS2 Richard Henderson
2025-08-30 5:41 ` [PATCH v4 66/84] target/arm: Add gcs record for BL Richard Henderson
2025-08-30 5:41 ` [PATCH v4 67/84] target/arm: Add gcs record for BLR Richard Henderson
2025-08-30 5:41 ` [PATCH v4 68/84] target/arm: Add gcs record for BLR with PAuth Richard Henderson
2025-09-09 17:17 ` Peter Maydell
2025-08-30 5:41 ` [PATCH v4 69/84] target/arm: Load gcs record for RET Richard Henderson
2025-08-30 5:41 ` [PATCH v4 70/84] target/arm: Load gcs record for RET with PAuth Richard Henderson
2025-08-30 5:41 ` [PATCH v4 71/84] target/arm: Copy EXLOCKEn to EXLOCK on exception to the same EL Richard Henderson
2025-08-30 5:41 ` [PATCH v4 72/84] target/arm: Implement EXLOCK check during exception return Richard Henderson
2025-08-30 5:41 ` [PATCH v4 73/84] target/arm: Enable FEAT_GCS with -cpu max Richard Henderson
2025-08-30 5:41 ` [PATCH v4 74/84] linux-user/aarch64: Implement prctls for GCS Richard Henderson
2025-08-30 5:41 ` [PATCH v4 75/84] linux-user/aarch64: Allocate new gcs stack on clone Richard Henderson
2025-08-30 5:41 ` [PATCH v4 76/84] linux-user/aarch64: Release gcs stack on thread exit Richard Henderson
2025-08-30 5:41 ` [PATCH v4 77/84] linux-user/aarch64: Implement map_shadow_stack syscall Richard Henderson
2025-08-30 5:41 ` [PATCH v4 78/84] target/arm: Enable GCSPR_EL0 for read in user-mode Richard Henderson
2025-08-30 5:41 ` [PATCH v4 79/84] linux-user/aarch64: Inject SIGSEGV for GCS faults Richard Henderson
2025-08-30 5:41 ` [PATCH v4 80/84] linux-user/aarch64: Generate GCS signal records Richard Henderson
2025-08-30 5:41 ` [PATCH v4 81/84] linux-user/aarch64: Enable GCS in HWCAP Richard Henderson
2025-08-30 5:41 ` [PATCH v4 82/84] tests/tcg/aarch64: Add gcsstr Richard Henderson
2025-08-30 5:41 ` [PATCH v4 83/84] tests/tcg/aarch64: Add gcspushm Richard Henderson
2025-08-30 5:41 ` [PATCH v4 84/84] tests/tcg/aarch64: Add gcsss Richard Henderson
2025-09-11 12:18 ` [PATCH v4 00/84] target/arm: Implement FEAT_GCS Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250830054128.448363-8-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=pierrick.bouvier@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).