From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Igor Mammedov" <imammedo@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Richard Henderson" <richard.henderson@linaro.org>
Subject: [PULL 11/61] accel/tcg: create a thread-kick function for TCG
Date: Sat, 13 Sep 2025 10:08:52 +0200 [thread overview]
Message-ID: <20250913080943.11710-12-pbonzini@redhat.com> (raw)
In-Reply-To: <20250913080943.11710-1-pbonzini@redhat.com>
Round-robin TCG is calling into cpu_exit() directly. In preparation
for making cpu_exit() usable from all accelerators, define a generic
thread-kick function for TCG which is used directly in the multi-threaded
case, and through CPU_FOREACH in the round-robin case.
Use it also for user-mode emulation, and take the occasion to move
the implementation to accel/tcg/user-exec.c.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
docs/devel/tcg-icount.rst | 2 +-
accel/tcg/tcg-accel-ops-mttcg.h | 3 ---
accel/tcg/tcg-accel-ops.h | 1 +
accel/tcg/cpu-exec.c | 6 ++++++
accel/tcg/tcg-accel-ops-mttcg.c | 5 -----
accel/tcg/tcg-accel-ops-rr.c | 2 +-
accel/tcg/tcg-accel-ops.c | 2 +-
accel/tcg/user-exec.c | 6 ++++++
bsd-user/main.c | 5 -----
linux-user/main.c | 5 -----
10 files changed, 16 insertions(+), 21 deletions(-)
diff --git a/docs/devel/tcg-icount.rst b/docs/devel/tcg-icount.rst
index 7df883446a7..a1dcd79e0fd 100644
--- a/docs/devel/tcg-icount.rst
+++ b/docs/devel/tcg-icount.rst
@@ -37,7 +37,7 @@ translator starts by allocating a budget of instructions to be
executed. The budget of instructions is limited by how long it will be
until the next timer will expire. We store this budget as part of a
vCPU icount_decr field which shared with the machinery for handling
-cpu_exit(). The whole field is checked at the start of every
+qemu_cpu_kick(). The whole field is checked at the start of every
translated block and will cause a return to the outer loop to deal
with whatever caused the exit.
diff --git a/accel/tcg/tcg-accel-ops-mttcg.h b/accel/tcg/tcg-accel-ops-mttcg.h
index 8ffa7a9a9fe..5c145cc8595 100644
--- a/accel/tcg/tcg-accel-ops-mttcg.h
+++ b/accel/tcg/tcg-accel-ops-mttcg.h
@@ -10,9 +10,6 @@
#ifndef TCG_ACCEL_OPS_MTTCG_H
#define TCG_ACCEL_OPS_MTTCG_H
-/* kick MTTCG vCPU thread */
-void mttcg_kick_vcpu_thread(CPUState *cpu);
-
/* start an mttcg vCPU thread */
void mttcg_start_vcpu_thread(CPUState *cpu);
diff --git a/accel/tcg/tcg-accel-ops.h b/accel/tcg/tcg-accel-ops.h
index 6feeb3f3e9b..aecce605d7b 100644
--- a/accel/tcg/tcg-accel-ops.h
+++ b/accel/tcg/tcg-accel-ops.h
@@ -18,5 +18,6 @@ void tcg_cpu_destroy(CPUState *cpu);
int tcg_cpu_exec(CPUState *cpu);
void tcg_handle_interrupt(CPUState *cpu, int mask);
void tcg_cpu_init_cflags(CPUState *cpu, bool parallel);
+void tcg_kick_vcpu_thread(CPUState *cpu);
#endif /* TCG_ACCEL_OPS_H */
diff --git a/accel/tcg/cpu-exec.c b/accel/tcg/cpu-exec.c
index f838535d111..9241bcadb5f 100644
--- a/accel/tcg/cpu-exec.c
+++ b/accel/tcg/cpu-exec.c
@@ -40,6 +40,7 @@
#include "exec/replay-core.h"
#include "system/tcg.h"
#include "exec/helper-proto-common.h"
+#include "tcg-accel-ops.h"
#include "tb-jmp-cache.h"
#include "tb-hash.h"
#include "tb-context.h"
@@ -748,6 +749,11 @@ static inline bool cpu_handle_exception(CPUState *cpu, int *ret)
return false;
}
+void tcg_kick_vcpu_thread(CPUState *cpu)
+{
+ cpu_exit(cpu);
+}
+
static inline bool icount_exit_request(CPUState *cpu)
{
if (!icount_enabled()) {
diff --git a/accel/tcg/tcg-accel-ops-mttcg.c b/accel/tcg/tcg-accel-ops-mttcg.c
index b12b7a36b5d..1148ebcaae5 100644
--- a/accel/tcg/tcg-accel-ops-mttcg.c
+++ b/accel/tcg/tcg-accel-ops-mttcg.c
@@ -123,11 +123,6 @@ static void *mttcg_cpu_thread_fn(void *arg)
return NULL;
}
-void mttcg_kick_vcpu_thread(CPUState *cpu)
-{
- cpu_exit(cpu);
-}
-
void mttcg_start_vcpu_thread(CPUState *cpu)
{
char thread_name[VCPU_THREAD_NAME_SIZE];
diff --git a/accel/tcg/tcg-accel-ops-rr.c b/accel/tcg/tcg-accel-ops-rr.c
index d13e0d8b44d..a1d75fd3419 100644
--- a/accel/tcg/tcg-accel-ops-rr.c
+++ b/accel/tcg/tcg-accel-ops-rr.c
@@ -43,7 +43,7 @@ void rr_kick_vcpu_thread(CPUState *unused)
CPUState *cpu;
CPU_FOREACH(cpu) {
- cpu_exit(cpu);
+ tcg_kick_vcpu_thread(cpu);
};
}
diff --git a/accel/tcg/tcg-accel-ops.c b/accel/tcg/tcg-accel-ops.c
index 9c37266c1e0..1f662a9c745 100644
--- a/accel/tcg/tcg-accel-ops.c
+++ b/accel/tcg/tcg-accel-ops.c
@@ -206,7 +206,7 @@ static void tcg_accel_ops_init(AccelClass *ac)
if (qemu_tcg_mttcg_enabled()) {
ops->create_vcpu_thread = mttcg_start_vcpu_thread;
- ops->kick_vcpu_thread = mttcg_kick_vcpu_thread;
+ ops->kick_vcpu_thread = tcg_kick_vcpu_thread;
ops->handle_interrupt = tcg_handle_interrupt;
} else {
ops->create_vcpu_thread = rr_start_vcpu_thread;
diff --git a/accel/tcg/user-exec.c b/accel/tcg/user-exec.c
index 66c25fba7dd..3c072fd868f 100644
--- a/accel/tcg/user-exec.c
+++ b/accel/tcg/user-exec.c
@@ -38,6 +38,7 @@
#include "qemu/int128.h"
#include "trace.h"
#include "tcg/tcg-ldst.h"
+#include "tcg-accel-ops.h"
#include "backend-ldst.h"
#include "internal-common.h"
#include "tb-internal.h"
@@ -46,6 +47,11 @@ __thread uintptr_t helper_retaddr;
//#define DEBUG_SIGNAL
+void qemu_cpu_kick(CPUState *cpu)
+{
+ tcg_kick_vcpu_thread(cpu);
+}
+
/*
* Adjust the pc to pass to cpu_restore_state; return the memop type.
*/
diff --git a/bsd-user/main.c b/bsd-user/main.c
index 9ba69642f50..73aae8c3274 100644
--- a/bsd-user/main.c
+++ b/bsd-user/main.c
@@ -214,11 +214,6 @@ bool qemu_cpu_is_self(CPUState *cpu)
return thread_cpu == cpu;
}
-void qemu_cpu_kick(CPUState *cpu)
-{
- cpu_exit(cpu);
-}
-
/* Assumes contents are already zeroed. */
static void init_task_state(TaskState *ts)
{
diff --git a/linux-user/main.c b/linux-user/main.c
index 7b0ccb6fd60..4ddfc9a619c 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -189,11 +189,6 @@ bool qemu_cpu_is_self(CPUState *cpu)
return thread_cpu == cpu;
}
-void qemu_cpu_kick(CPUState *cpu)
-{
- cpu_exit(cpu);
-}
-
void task_settid(TaskState *ts)
{
if (ts->ts_tid == 0) {
--
2.51.0
next prev parent reply other threads:[~2025-09-13 8:21 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-13 8:08 [PULL 00/61] CPU, Rust, x86 changes for 2025-09-13 Paolo Bonzini
2025-09-13 8:08 ` [PULL 01/61] target/ppc: limit cpu_interrupt_exittb to system emulation Paolo Bonzini
2025-09-13 8:08 ` [PULL 02/61] target/sparc: limit cpu_check_irqs " Paolo Bonzini
2025-09-13 8:08 ` [PULL 03/61] target/i386: limit a20 " Paolo Bonzini
2025-09-13 8:08 ` [PULL 04/61] target-arm: remove uses of cpu_interrupt() for user-mode emulation Paolo Bonzini
2025-09-13 8:08 ` [PULL 05/61] user-exec: remove cpu_interrupt() stub Paolo Bonzini
2025-09-13 8:08 ` [PULL 06/61] treewide: clear bits of cs->interrupt_request with cpu_reset_interrupt() Paolo Bonzini
2025-09-13 8:08 ` [PULL 07/61] cpu-common: use atomic access for interrupt_request Paolo Bonzini
2025-09-13 8:08 ` [PULL 08/61] cpus: document that qemu_cpu_kick() can be used for BQL-less operation Paolo Bonzini
2025-09-13 8:08 ` [PULL 09/61] accel: use store_release/load_acquire for cross-thread exit_request Paolo Bonzini
2025-09-13 8:08 ` [PULL 10/61] accel: use atomic accesses for exit_request Paolo Bonzini
2025-09-13 8:08 ` Paolo Bonzini [this message]
2025-09-13 8:08 ` [PULL 12/61] accel/tcg: inline cpu_exit() Paolo Bonzini
2025-09-13 8:08 ` [PULL 13/61] cpus: remove TCG-ism from cpu_exit() Paolo Bonzini
2025-09-13 8:08 ` [PULL 14/61] cpus: properly kick CPUs out of inner execution loop Paolo Bonzini
2025-09-13 8:08 ` [PULL 15/61] treewide: rename qemu_wait_io_event/qemu_wait_io_event_common Paolo Bonzini
2025-09-13 8:08 ` [PULL 16/61] bsd-user, linux-user: introduce qemu_process_cpu_events Paolo Bonzini
2025-09-13 8:08 ` [PULL 17/61] cpus: clear exit_request in qemu_process_cpu_events Paolo Bonzini
2025-09-13 8:08 ` [PULL 18/61] accel: make all calls to qemu_process_cpu_events look the same Paolo Bonzini
2025-09-13 8:09 ` [PULL 19/61] tcg/user: do not set exit_request gratuitously Paolo Bonzini
2025-09-13 8:09 ` [PULL 20/61] ci: temporarily remove rust from Ubuntu Paolo Bonzini
2025-09-13 8:09 ` [PULL 21/61] configure: bump Meson to 1.9.0 for use with Rust Paolo Bonzini
2025-09-22 14:07 ` Peter Maydell
2025-09-22 15:14 ` Paolo Bonzini
2025-09-13 8:09 ` [PULL 22/61] meson, cargo: require Rust 1.83.0 Paolo Bonzini
2025-09-13 8:09 ` [PULL 23/61] rust: add missing const markers for MSRV==1.83.0 Paolo Bonzini
2025-09-13 8:09 ` [PULL 24/61] rust: use inline const expressions Paolo Bonzini
2025-09-13 8:09 ` [PULL 25/61] rust: add qdev Device derive macro Paolo Bonzini
2025-09-13 8:09 ` [PULL 26/61] rust: vmstate: convert to use builder pattern Paolo Bonzini
2025-09-13 8:09 ` [PULL 27/61] rust: vmstate: use const_refs_to_static Paolo Bonzini
2025-09-13 8:09 ` [PULL 28/61] rust: qdev: const_refs_to_static Paolo Bonzini
2025-09-13 8:09 ` [PULL 29/61] docs/rust: update msrv Paolo Bonzini
2025-09-13 8:09 ` [PULL 30/61] rust: remove unused global qemu "allocator" Paolo Bonzini
2025-09-13 8:09 ` [PULL 31/61] rust: add workspace authors Paolo Bonzini
2025-09-13 8:09 ` [PULL 32/61] rust: move vmstate_clock!() to qdev module Paolo Bonzini
2025-09-13 8:09 ` [PULL 33/61] rust: move VMState handling to QOM module Paolo Bonzini
2025-09-13 8:09 ` [PULL 34/61] rust: move Cell vmstate impl Paolo Bonzini
2025-09-13 8:09 ` [PULL 35/61] rust: split Rust-only "common" crate Paolo Bonzini
2025-09-13 8:09 ` [PULL 36/61] rust: make build.rs generic over various ./rust/projects Paolo Bonzini
2025-09-13 8:09 ` [PULL 37/61] rust: split "util" crate Paolo Bonzini
2025-09-13 8:09 ` [PULL 38/61] rust: split "migration" crate Paolo Bonzini
2025-09-13 8:09 ` [PULL 39/61] rust: split "bql" crate Paolo Bonzini
2025-09-13 8:09 ` [PULL 40/61] rust: split "qom" crate Paolo Bonzini
2025-09-13 8:09 ` [PULL 41/61] rust: split "chardev" crate Paolo Bonzini
2025-09-13 8:09 ` [PULL 42/61] rust: split "system" crate Paolo Bonzini
2025-09-13 8:09 ` [PULL 43/61] rust: split "hwcore" crate Paolo Bonzini
2025-09-13 8:09 ` [PULL 44/61] rust: rename qemu_api_macros -> qemu_macros Paolo Bonzini
2025-09-13 8:09 ` [PULL 45/61] rust/hpet: drop now unneeded qemu_api dep Paolo Bonzini
2025-09-13 8:09 ` [PULL 46/61] rust/pl011: drop dependency on qemu_api Paolo Bonzini
2025-09-13 8:09 ` [PULL 47/61] rust: repurpose qemu_api -> tests Paolo Bonzini
2025-09-13 8:09 ` [PULL 48/61] rust: re-export qemu_macros internal helper in "bits" Paolo Bonzini
2025-09-13 8:09 ` [PULL 49/61] rust: re-export qemu macros from common/qom/hwcore Paolo Bonzini
2025-09-13 8:09 ` [PULL 50/61] docs: update rust.rst Paolo Bonzini
2025-09-13 8:09 ` [PULL 51/61] rust: meson: remove unnecessary complication in device crates Paolo Bonzini
2025-09-13 8:09 ` [PULL 52/61] rust: do not inline do_init_io Paolo Bonzini
2025-09-13 8:09 ` [PULL 53/61] hpet: guard IRQ handling with BQL Paolo Bonzini
2025-09-13 8:09 ` [PULL 54/61] i386/cpu: Enable SMM cpu address space under KVM Paolo Bonzini
2025-09-18 16:24 ` Michael Tokarev
2025-09-22 15:16 ` Paolo Bonzini
2025-09-26 17:48 ` Peter Maydell
2025-09-28 6:51 ` Xiaoyao Li
2025-09-13 8:09 ` [PULL 55/61] target/i386: Define enum X86ASIdx for x86's address spaces Paolo Bonzini
2025-09-13 8:09 ` [PULL 56/61] multiboot: Fix the split lock Paolo Bonzini
2025-09-13 8:09 ` [PULL 57/61] i386/kvm: Get X86MachineState in kvm_arch_init() without the cast check Paolo Bonzini
2025-09-13 8:09 ` [PULL 58/61] i386/kvm: Drop KVM_CAP_X86_SMM check in kvm_arch_init() Paolo Bonzini
2025-09-13 8:09 ` [PULL 59/61] accel/kvm: Switch to check KVM_CAP_GUEST_MEMFD and KVM_CAP_USER_MEMORY2 on VM Paolo Bonzini
2025-09-13 8:09 ` [PULL 60/61] accel/kvm: Zero out mem explicitly in kvm_set_user_memory_region() Paolo Bonzini
2025-09-13 8:09 ` [PULL 61/61] accel/kvm: Set guest_memfd_offset to non-zero value only when guest_memfd is valid Paolo Bonzini
2025-09-13 9:37 ` [PULL 00/61] CPU, Rust, x86 changes for 2025-09-13 Peter Maydell
2025-09-16 14:37 ` Peter Maydell
2025-09-16 14:53 ` Paolo Bonzini
2025-09-17 16:33 ` Richard Henderson
2025-09-18 12:38 ` Xiaoyao Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250913080943.11710-12-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=imammedo@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).