[PATCH v6 22/22] docs/devel: Add IOMMUFD nesting documentation

[Zhenzhong Duan <zhenzhong.duan@intel.com>]

Add documentation about using IOMMUFD backed VFIO device with intel_iommu with
x-flts=on.

Suggested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
---
 docs/devel/vfio-iommufd.rst | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/docs/devel/vfio-iommufd.rst b/docs/devel/vfio-iommufd.rst
index 3d1c11f175..d9cb9e7f5e 100644
--- a/docs/devel/vfio-iommufd.rst
+++ b/docs/devel/vfio-iommufd.rst
@@ -164,3 +164,27 @@ RAM discarding for mdev.
 
 ``vfio-ap`` and ``vfio-ccw`` devices don't have same issue as their backend
 devices are always mdev and RAM discarding is force enabled.
+
+Usage with intel_iommu with x-flts=on
+-------------------------------------
+
+Only IOMMUFD backed VFIO device is supported when intel_iommu is configured
+with x-flts=on, for legacy container backed VFIO device, below error shows:
+
+.. code-block:: none
+
+    qemu-system-x86_64: -device vfio-pci,host=0000:02:00.0: vfio 0000:02:00.0: Failed to set vIOMMU: Need IOMMUFD backend when x-flts=on
+
+VFIO device under PCI bridge is unsupported, use PCIE bridge if necessary,
+or else below error shows:
+
+.. code-block:: none
+
+    qemu-system-x86_64: -device vfio-pci,host=0000:02:00.0,bus=bridge1,iommufd=iommufd0: vfio 0000:02:00.0: Failed to set vIOMMU: Host device under PCI bridge is unsupported when x-flts=on
+
+If host IOMMU has ERRATA_772415_SPR17, kexec or reboot from "intel_iommu=on,sm_on"
+to "intel_iommu=on,sm_off" in guest is also unsupported. Configure scalable mode
+off as below if it's not needed by guest.
+
+.. code-block:: bash
+    -device intel-iommu,x-scalable-mode=off
-- 
2.47.1