From: Jamin Lin via <qemu-devel@nongnu.org>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Cédric Le Goater" <clg@kaod.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"open list:ARM TCG CPUs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: jamin_lin@aspeedtech.com, troy_lee@aspeedtech.com,
nabihestefan@google.com, wuhaotsh@google.com, titusr@google.com,
"Cédric Le Goater" <clg@redhat.com>
Subject: [PATCH v5 09/14] hw/pci-host/aspeed: Add AST2700 PCIe PHY
Date: Fri, 19 Sep 2025 17:30:08 +0800 [thread overview]
Message-ID: <20250919093017.338309-10-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20250919093017.338309-1-jamin_lin@aspeedtech.com>
Introduce a PCIe Host Controller PHY model for AST2700. This adds an
AST2700 specific PHY type (TYPE_ASPEED_2700_PCIE_PHY) with a 0x800 byte
register space and link-status bits compatible with the firmware’s
expectations.
AST2700 provides three PCIe RCs; PCIe0 and PCIe1 are GEN4, PCIe2 is
GEN2. The PHY exposes:
PEHR_2700_LINK_GEN2 at 0x344, bit 18 indicates GEN2 link up
PEHR_2700_LINK_GEN4 at 0x358, bit 8 indicates GEN4 link up
In real hardware these GEN2/GEN4 link bits are mutually exclusive.
QEMU does not model GEN2 vs GEN4 signaling differences, so the reset
handler sets both bits to 1. This keeps the model simple and lets
firmware see the link as up; firmware will read the appropriate
register per RC port to infer the intended mode.
The header gains TYPE_ASPEED_2700_PCIE_PHY; the new class derives from
TYPE_ASPEED_PCIE_PHY, sets nr_regs to 0x800 >> 2, and installs an
AST2700 reset routine that programs the class code (0x06040011) and the
GEN2/GEN4 status bits.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/pci-host/aspeed_pcie.h | 1 +
hw/pci-host/aspeed_pcie.c | 39 +++++++++++++++++++++++++++++++
2 files changed, 40 insertions(+)
diff --git a/include/hw/pci-host/aspeed_pcie.h b/include/hw/pci-host/aspeed_pcie.h
index 5e60cba07b..5806505f30 100644
--- a/include/hw/pci-host/aspeed_pcie.h
+++ b/include/hw/pci-host/aspeed_pcie.h
@@ -114,6 +114,7 @@ struct AspeedPCIECfgClass {
};
#define TYPE_ASPEED_PCIE_PHY "aspeed.pcie-phy"
+#define TYPE_ASPEED_2700_PCIE_PHY TYPE_ASPEED_PCIE_PHY "-ast2700"
OBJECT_DECLARE_TYPE(AspeedPCIEPhyState, AspeedPCIEPhyClass, ASPEED_PCIE_PHY);
struct AspeedPCIEPhyState {
diff --git a/hw/pci-host/aspeed_pcie.c b/hw/pci-host/aspeed_pcie.c
index 8be55b962f..788160d532 100644
--- a/hw/pci-host/aspeed_pcie.c
+++ b/hw/pci-host/aspeed_pcie.c
@@ -696,6 +696,12 @@ REG32(PEHR_PROTECT, 0x7C)
REG32(PEHR_LINK, 0xC0)
FIELD(PEHR_LINK, STS, 5, 1)
+/* AST2700 */
+REG32(PEHR_2700_LINK_GEN2, 0x344)
+ FIELD(PEHR_2700_LINK_GEN2, STS, 18, 1)
+REG32(PEHR_2700_LINK_GEN4, 0x358)
+ FIELD(PEHR_2700_LINK_GEN4, STS, 8, 1)
+
#define ASPEED_PCIE_PHY_UNLOCK 0xA8
static uint64_t aspeed_pcie_phy_read(void *opaque, hwaddr addr,
@@ -803,6 +809,38 @@ static const TypeInfo aspeed_pcie_phy_info = {
.class_size = sizeof(AspeedPCIEPhyClass),
};
+static void aspeed_2700_pcie_phy_reset(DeviceState *dev)
+{
+ AspeedPCIEPhyState *s = ASPEED_PCIE_PHY(dev);
+ AspeedPCIEPhyClass *apc = ASPEED_PCIE_PHY_GET_CLASS(s);
+
+ memset(s->regs, 0, apc->nr_regs << 2);
+
+ s->regs[R_PEHR_ID] =
+ (0x1150 << R_PEHR_ID_DEV_SHIFT) | PCI_VENDOR_ID_ASPEED;
+ s->regs[R_PEHR_CLASS_CODE] = 0x06040011;
+ s->regs[R_PEHR_2700_LINK_GEN2] = R_PEHR_2700_LINK_GEN2_STS_MASK;
+ s->regs[R_PEHR_2700_LINK_GEN4] = R_PEHR_2700_LINK_GEN4_STS_MASK;
+}
+
+static void aspeed_2700_pcie_phy_class_init(ObjectClass *klass,
+ const void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedPCIEPhyClass *apc = ASPEED_PCIE_PHY_CLASS(klass);
+
+ dc->desc = "ASPEED AST2700 PCIe Phy";
+ device_class_set_legacy_reset(dc, aspeed_2700_pcie_phy_reset);
+
+ apc->nr_regs = 0x800 >> 2;
+}
+
+static const TypeInfo aspeed_2700_pcie_phy_info = {
+ .name = TYPE_ASPEED_2700_PCIE_PHY,
+ .parent = TYPE_ASPEED_PCIE_PHY,
+ .class_init = aspeed_2700_pcie_phy_class_init,
+};
+
static void aspeed_pcie_register_types(void)
{
type_register_static(&aspeed_pcie_rc_info);
@@ -810,6 +848,7 @@ static void aspeed_pcie_register_types(void)
type_register_static(&aspeed_pcie_root_port_info);
type_register_static(&aspeed_pcie_cfg_info);
type_register_static(&aspeed_pcie_phy_info);
+ type_register_static(&aspeed_2700_pcie_phy_info);
}
type_init(aspeed_pcie_register_types);
--
2.43.0
next prev parent reply other threads:[~2025-09-19 9:33 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-19 9:29 [PATCH v5 00/14] Support PCIe RC to AST2600 and AST2700 Jamin Lin via
2025-09-19 9:30 ` [PATCH v5 01/14] hw/pci/pci_ids: Add PCI vendor ID for ASPEED Jamin Lin via
2025-09-19 9:30 ` [PATCH v5 02/14] hw/pci-host/aspeed: Add AST2600 PCIe PHY model Jamin Lin via
2025-09-19 9:30 ` [PATCH v5 03/14] hw/pci-host/aspeed: Add AST2600 PCIe config space and host bridge Jamin Lin via
2025-09-19 9:30 ` [PATCH v5 04/14] hw/pci-host/aspeed: Add AST2600 PCIe Root Device support Jamin Lin via
2025-09-19 9:30 ` [PATCH v5 05/14] hw/pci-host/aspeed: Add AST2600 PCIe Root Port and make address configurable Jamin Lin via
2025-09-19 9:30 ` [PATCH v5 06/14] hw/pci-host/aspeed: Add MSI support and per-RC IOMMU address space Jamin Lin via
2025-09-19 9:30 ` [PATCH v5 07/14] hw/arm/aspeed: Wire up PCIe devices in SoC model Jamin Lin via
2025-09-19 9:30 ` [PATCH v5 08/14] hw/arm/aspeed_ast2600: Add PCIe RC support (RC_H only) Jamin Lin via
2025-09-19 9:30 ` Jamin Lin via [this message]
2025-09-19 9:30 ` [PATCH v5 10/14] hw/pci-host/aspeed: Add AST2700 PCIe config with dedicated H2X blocks Jamin Lin via
2025-09-19 9:30 ` [PATCH v5 11/14] hw/pci-host/aspeed: Disable Root Device and place Root Port at 00:00.0 to AST2700 Jamin Lin via
2025-09-19 9:30 ` [PATCH v5 12/14] hw/arm/aspeed_ast27x0: Introduce 3 PCIe RCs for AST2700 Jamin Lin via
2025-09-19 9:49 ` [SPAM] " Cédric Le Goater
2025-09-19 9:30 ` [PATCH v5 13/14] tests/functional/arm/test_aspeed_ast2600: Add PCIe and network test Jamin Lin via
2025-09-19 9:30 ` [PATCH v5 14/14] tests/functional/aarch64/aspeed_ast2700: Add PCIe and network tests Jamin Lin via
2025-10-01 6:04 ` [SPAM] " Cédric Le Goater
2025-09-19 9:52 ` [SPAM] [PATCH v5 00/14] Support PCIe RC to AST2600 and AST2700 Cédric Le Goater
2025-10-01 2:20 ` Jamin Lin
2025-10-01 6:01 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250919093017.338309-10-jamin_lin@aspeedtech.com \
--to=qemu-devel@nongnu.org \
--cc=andrew@codeconstruct.com.au \
--cc=clg@kaod.org \
--cc=clg@redhat.com \
--cc=jamin_lin@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=leetroy@gmail.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=mst@redhat.com \
--cc=nabihestefan@google.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=titusr@google.com \
--cc=troy_lee@aspeedtech.com \
--cc=wuhaotsh@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).