From: Peter Xu <peterx@redhat.com>
To: Peter Maydell <peter.maydell@linaro.org>, qemu-devel@nongnu.org
Cc: "Fabiano Rosas" <farosas@suse.de>,
peterx@redhat.com, "David Hildenbrand" <david@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Arun Menon" <armenon@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Akihiko Odaki" <odaki@rsg.ci.i.u-tokyo.ac.jp>
Subject: [PULL 01/45] migration: push Error **errp into vmstate_subsection_load()
Date: Fri, 3 Oct 2025 11:39:04 -0400 [thread overview]
Message-ID: <20251003153948.1304776-2-peterx@redhat.com> (raw)
In-Reply-To: <20251003153948.1304776-1-peterx@redhat.com>
From: Arun Menon <armenon@redhat.com>
This is an incremental step in converting vmstate loading
code to report error via Error objects instead of directly
printing it to console/monitor.
It is ensured that vmstate_subsection_load() must report an error
in errp, in case of failure.
The errors are temporarily reported using error_report_err().
This is removed in the subsequent patches in this series,
when we are actually able to propagate the error to the calling
function using errp.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Arun Menon <armenon@redhat.com>
Tested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20250918-propagate_tpm_error-v14-1-36f11a6fb9d3@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
---
migration/vmstate.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/migration/vmstate.c b/migration/vmstate.c
index 5feaa3244d..08f2b562e3 100644
--- a/migration/vmstate.c
+++ b/migration/vmstate.c
@@ -25,7 +25,7 @@ static int vmstate_subsection_save(QEMUFile *f, const VMStateDescription *vmsd,
void *opaque, JSONWriter *vmdesc,
Error **errp);
static int vmstate_subsection_load(QEMUFile *f, const VMStateDescription *vmsd,
- void *opaque);
+ void *opaque, Error **errp);
/* Whether this field should exist for either save or load the VM? */
static bool
@@ -136,6 +136,7 @@ int vmstate_load_state(QEMUFile *f, const VMStateDescription *vmsd,
{
const VMStateField *field = vmsd->fields;
int ret = 0;
+ Error *local_err = NULL;
trace_vmstate_load_state(vmsd->name, version_id);
if (version_id > vmsd->version_id) {
@@ -225,9 +226,10 @@ int vmstate_load_state(QEMUFile *f, const VMStateDescription *vmsd,
field++;
}
assert(field->flags == VMS_END);
- ret = vmstate_subsection_load(f, vmsd, opaque);
+ ret = vmstate_subsection_load(f, vmsd, opaque, &local_err);
if (ret != 0) {
qemu_file_set_error(f, ret);
+ error_report_err(local_err);
return ret;
}
if (vmsd->post_load) {
@@ -566,7 +568,7 @@ vmstate_get_subsection(const VMStateDescription * const *sub,
}
static int vmstate_subsection_load(QEMUFile *f, const VMStateDescription *vmsd,
- void *opaque)
+ void *opaque, Error **errp)
{
trace_vmstate_subsection_load(vmsd->name);
@@ -598,6 +600,8 @@ static int vmstate_subsection_load(QEMUFile *f, const VMStateDescription *vmsd,
sub_vmsd = vmstate_get_subsection(vmsd->subsections, idstr);
if (sub_vmsd == NULL) {
trace_vmstate_subsection_load_bad(vmsd->name, idstr, "(lookup)");
+ error_setg(errp, "VM subsection '%s' in '%s' does not exist",
+ idstr, vmsd->name);
return -ENOENT;
}
qemu_file_skip(f, 1); /* subsection */
@@ -608,6 +612,9 @@ static int vmstate_subsection_load(QEMUFile *f, const VMStateDescription *vmsd,
ret = vmstate_load_state(f, sub_vmsd, opaque, version_id);
if (ret) {
trace_vmstate_subsection_load_bad(vmsd->name, idstr, "(child)");
+ error_setg(errp,
+ "Loading VM subsection '%s' in '%s' failed: %d",
+ idstr, vmsd->name, ret);
return ret;
}
}
--
2.50.1
next prev parent reply other threads:[~2025-10-03 15:42 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-03 15:39 [PULL 00/45] Staging patches Peter Xu
2025-10-03 15:39 ` Peter Xu [this message]
2025-10-03 15:39 ` [PULL 02/45] migration: push Error **errp into vmstate_load_state() Peter Xu
2025-10-03 15:39 ` [PULL 03/45] migration: push Error **errp into qemu_loadvm_state_header() Peter Xu
2025-10-03 15:39 ` [PULL 04/45] migration: push Error **errp into vmstate_load() Peter Xu
2025-10-03 15:39 ` [PULL 05/45] migration: push Error **errp into loadvm_process_command() Peter Xu
2025-10-03 15:39 ` [PULL 06/45] migration: push Error **errp into loadvm_handle_cmd_packaged() Peter Xu
2025-10-03 15:39 ` [PULL 07/45] migration: push Error **errp into qemu_loadvm_state() Peter Xu
2025-10-03 15:39 ` [PULL 08/45] migration: push Error **errp into qemu_load_device_state() Peter Xu
2025-10-03 15:39 ` [PULL 09/45] migration: push Error **errp into qemu_loadvm_state_main() Peter Xu
2025-10-03 15:39 ` [PULL 10/45] migration: push Error **errp into qemu_loadvm_section_start_full() Peter Xu
2025-10-03 15:39 ` [PULL 11/45] migration: push Error **errp into qemu_loadvm_section_part_end() Peter Xu
2025-10-03 15:39 ` [PULL 12/45] migration: Update qemu_file_get_return_path() docs and remove dead checks Peter Xu
2025-10-03 15:39 ` [PULL 13/45] migration: make loadvm_postcopy_handle_resume() void Peter Xu
2025-10-03 15:39 ` [PULL 14/45] migration: push Error **errp into ram_postcopy_incoming_init() Peter Xu
2025-10-03 15:39 ` [PULL 15/45] migration: push Error **errp into loadvm_postcopy_handle_advise() Peter Xu
2025-10-03 15:39 ` [PULL 16/45] migration: push Error **errp into loadvm_postcopy_handle_listen() Peter Xu
2025-10-03 15:39 ` [PULL 17/45] migration: push Error **errp into loadvm_postcopy_handle_run() Peter Xu
2025-10-03 15:39 ` [PULL 18/45] migration: push Error **errp into loadvm_postcopy_ram_handle_discard() Peter Xu
2025-10-03 15:39 ` [PULL 19/45] migration: push Error **errp into loadvm_handle_recv_bitmap() Peter Xu
2025-10-03 15:39 ` [PULL 20/45] migration: Return -1 on memory allocation failure in ram.c Peter Xu
2025-10-03 15:39 ` [PULL 21/45] migration: push Error **errp into loadvm_process_enable_colo() Peter Xu
2025-10-03 15:39 ` [PULL 22/45] migration: push Error **errp into loadvm_postcopy_handle_switchover_start() Peter Xu
2025-10-03 15:39 ` [PULL 23/45] migration: Capture error in postcopy_ram_listen_thread() Peter Xu
2025-10-03 15:39 ` [PULL 24/45] migration: Remove error variant of vmstate_save_state() function Peter Xu
2025-10-03 15:39 ` [PULL 25/45] migration: Add error-parameterized function variants in VMSD struct Peter Xu
2025-10-03 15:39 ` [PULL 26/45] backends/tpm: Propagate vTPM error on migration failure Peter Xu
2025-10-03 15:39 ` [PULL 27/45] io/crypto: Move tls premature termination handling into QIO layer Peter Xu
2025-10-10 8:00 ` iotest 233 is failing (was: [PULL 27/45] io/crypto: Move tls premature termination handling into QIO layer) Thomas Huth
2025-10-10 8:35 ` iotest 233 is failing Thomas Huth
2025-10-03 15:39 ` [PULL 28/45] migration: Make migration_has_failed() work even for CANCELLING Peter Xu
2025-10-03 15:39 ` [PULL 29/45] migration: HMP: Adjust the order of output fields Peter Xu
2025-10-03 15:39 ` [PULL 30/45] migration/multifd/tls: Cleanup BYE message processing on sender side Peter Xu
2025-10-03 15:39 ` [PULL 31/45] migration: Fix state transition in postcopy_start() error handling Peter Xu
2025-10-03 15:39 ` [PULL 32/45] migration: ensure APIC is loaded prior to VFIO PCI devices Peter Xu
2025-10-03 15:39 ` [PULL 33/45] include/system/memory.h: Clarify address_space_destroy() behaviour Peter Xu
2025-10-03 15:39 ` [PULL 34/45] memory: New AS helper to serialize destroy+free Peter Xu
2025-10-03 15:39 ` [PULL 35/45] physmem: Destroy all CPU AddressSpaces on unrealize Peter Xu
2025-10-03 15:39 ` [PULL 36/45] migration: simplify error reporting after channel read Peter Xu
2025-10-03 15:39 ` [PULL 37/45] migration: multi-mode notifier Peter Xu
2025-10-03 15:39 ` [PULL 38/45] migration: add cpr_walk_fd Peter Xu
2025-10-03 15:39 ` [PULL 39/45] oslib: qemu_clear_cloexec Peter Xu
2025-10-03 15:39 ` [PULL 40/45] migration: cpr-exec-command parameter Peter Xu
2025-10-03 15:39 ` [PULL 41/45] migration: cpr-exec save and load Peter Xu
2025-10-03 15:39 ` [PULL 42/45] migration: cpr-exec mode Peter Xu
2025-10-03 15:39 ` [PULL 43/45] migration: cpr-exec docs Peter Xu
2025-10-03 15:39 ` [PULL 44/45] vfio: cpr-exec mode Peter Xu
2025-10-03 15:39 ` [PULL 45/45] migration-test: test cpr-exec Peter Xu
2025-10-04 17:53 ` [PULL 00/45] Staging patches Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251003153948.1304776-2-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=armenon@redhat.com \
--cc=david@redhat.com \
--cc=farosas@suse.de \
--cc=marcandre.lureau@redhat.com \
--cc=odaki@rsg.ci.i.u-tokyo.ac.jp \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).