[PULL 05/45] migration: push Error **errp into loadvm_process_command()

[Peter Xu <peterx@redhat.com>]

From: Arun Menon <armenon@redhat.com>

This is an incremental step in converting vmstate loading
code to report error via Error objects instead of directly
printing it to console/monitor.
It is ensured that loadvm_process_command() must report an error
in errp, in case of failure.

The errors are temporarily reported using error_report_err().
This is removed in the subsequent patches in this series
when we are actually able to propagate the error to the calling
function.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Arun Menon <armenon@redhat.com>
Tested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20250918-propagate_tpm_error-v14-5-36f11a6fb9d3@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
---
 migration/savevm.c | 86 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 63 insertions(+), 23 deletions(-)

diff --git a/migration/savevm.c b/migration/savevm.c
index fffea57cd9..d1ed2e1cde 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -2546,32 +2546,37 @@ static int loadvm_postcopy_handle_switchover_start(void)
  * LOADVM_QUIT All good, but exit the loop
  * <0          Error
  */
-static int loadvm_process_command(QEMUFile *f)
+static int loadvm_process_command(QEMUFile *f, Error **errp)
 {
     MigrationIncomingState *mis = migration_incoming_get_current();
     uint16_t cmd;
     uint16_t len;
     uint32_t tmp32;
+    int ret;
 
     cmd = qemu_get_be16(f);
     len = qemu_get_be16(f);
 
     /* Check validity before continue processing of cmds */
-    if (qemu_file_get_error(f)) {
-        return qemu_file_get_error(f);
+    ret = qemu_file_get_error(f);
+    if (ret) {
+        error_setg(errp,
+                   "Failed to load VM process command: stream error: %d",
+                   ret);
+        return ret;
     }
 
     if (cmd >= MIG_CMD_MAX || cmd == MIG_CMD_INVALID) {
-        error_report("MIG_CMD 0x%x unknown (len 0x%x)", cmd, len);
+        error_setg(errp, "MIG_CMD 0x%x unknown (len 0x%x)", cmd, len);
         return -EINVAL;
     }
 
     trace_loadvm_process_command(mig_cmd_args[cmd].name, len);
 
     if (mig_cmd_args[cmd].len != -1 && mig_cmd_args[cmd].len != len) {
-        error_report("%s received with bad length - expecting %zu, got %d",
-                     mig_cmd_args[cmd].name,
-                     (size_t)mig_cmd_args[cmd].len, len);
+        error_setg(errp, "%s received with bad length - expecting %zu, got %d",
+                   mig_cmd_args[cmd].name,
+                   (size_t)mig_cmd_args[cmd].len, len);
         return -ERANGE;
     }
 
@@ -2584,7 +2589,7 @@ static int loadvm_process_command(QEMUFile *f)
         }
         mis->to_src_file = qemu_file_get_return_path(f);
         if (!mis->to_src_file) {
-            error_report("CMD_OPEN_RETURN_PATH failed");
+            error_setg(errp, "CMD_OPEN_RETURN_PATH failed");
             return -1;
         }
 
@@ -2594,11 +2599,10 @@ static int loadvm_process_command(QEMUFile *f)
          * been created.
          */
         if (migrate_switchover_ack() && !mis->switchover_ack_pending_num) {
-            int ret = migrate_send_rp_switchover_ack(mis);
+            ret = migrate_send_rp_switchover_ack(mis);
             if (ret) {
-                error_report(
-                    "Could not send switchover ack RP MSG, err %d (%s)", ret,
-                    strerror(-ret));
+                error_setg_errno(errp, -ret,
+                                 "Could not send switchover ack RP MSG");
                 return ret;
             }
         }
@@ -2608,39 +2612,71 @@ static int loadvm_process_command(QEMUFile *f)
         tmp32 = qemu_get_be32(f);
         trace_loadvm_process_command_ping(tmp32);
         if (!mis->to_src_file) {
-            error_report("CMD_PING (0x%x) received with no return path",
-                         tmp32);
+            error_setg(errp, "CMD_PING (0x%x) received with no return path",
+                       tmp32);
             return -1;
         }
         migrate_send_rp_pong(mis, tmp32);
         break;
 
     case MIG_CMD_PACKAGED:
-        return loadvm_handle_cmd_packaged(mis);
+        ret = loadvm_handle_cmd_packaged(mis);
+        if (ret < 0) {
+            error_setg(errp, "Failed to load device state command: %d", ret);
+        }
+        return ret;
 
     case MIG_CMD_POSTCOPY_ADVISE:
-        return loadvm_postcopy_handle_advise(mis, len);
+        ret = loadvm_postcopy_handle_advise(mis, len);
+        if (ret < 0) {
+            error_setg(errp, "Failed to load device state command: %d", ret);
+        }
+        return ret;
 
     case MIG_CMD_POSTCOPY_LISTEN:
-        return loadvm_postcopy_handle_listen(mis);
+        ret = loadvm_postcopy_handle_listen(mis);
+        if (ret < 0) {
+            error_setg(errp, "Failed to load device state command: %d", ret);
+        }
+        return ret;
 
     case MIG_CMD_POSTCOPY_RUN:
-        return loadvm_postcopy_handle_run(mis);
+        ret = loadvm_postcopy_handle_run(mis);
+        if (ret < 0) {
+            error_setg(errp, "Failed to load device state command: %d", ret);
+        }
+        return ret;
 
     case MIG_CMD_POSTCOPY_RAM_DISCARD:
-        return loadvm_postcopy_ram_handle_discard(mis, len);
+        ret = loadvm_postcopy_ram_handle_discard(mis, len);
+        if (ret < 0) {
+            error_setg(errp, "Failed to load device state command: %d", ret);
+        }
+        return ret;
 
     case MIG_CMD_POSTCOPY_RESUME:
         return loadvm_postcopy_handle_resume(mis);
 
     case MIG_CMD_RECV_BITMAP:
-        return loadvm_handle_recv_bitmap(mis, len);
+        ret = loadvm_handle_recv_bitmap(mis, len);
+        if (ret < 0) {
+            error_setg(errp, "Failed to load device state command: %d", ret);
+        }
+        return ret;
 
     case MIG_CMD_ENABLE_COLO:
-        return loadvm_process_enable_colo(mis);
+        ret = loadvm_process_enable_colo(mis);
+        if (ret < 0) {
+            error_setg(errp, "Failed to load device state command: %d", ret);
+        }
+        return ret;
 
     case MIG_CMD_SWITCHOVER_START:
-        return loadvm_postcopy_handle_switchover_start();
+        ret = loadvm_postcopy_handle_switchover_start();
+        if (ret < 0) {
+            error_setg(errp, "Failed to load device state command: %d", ret);
+        }
+        return ret;
     }
 
     return 0;
@@ -3049,6 +3085,7 @@ int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis)
 {
     uint8_t section_type;
     int ret = 0;
+    Error *local_err = NULL;
 
 retry:
     while (true) {
@@ -3076,7 +3113,10 @@ retry:
             }
             break;
         case QEMU_VM_COMMAND:
-            ret = loadvm_process_command(f);
+            ret = loadvm_process_command(f, &local_err);
+            if (ret < 0) {
+                error_report_err(local_err);
+            }
             trace_qemu_loadvm_state_section_command(ret);
             if ((ret < 0) || (ret == LOADVM_QUIT)) {
                 goto out;
-- 
2.50.1