From: Peter Xu <peterx@redhat.com>
To: Peter Maydell <peter.maydell@linaro.org>, qemu-devel@nongnu.org
Cc: "Fabiano Rosas" <farosas@suse.de>,
peterx@redhat.com, "David Hildenbrand" <david@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Arun Menon" <armenon@redhat.com>,
"Akihiko Odaki" <odaki@rsg.ci.i.u-tokyo.ac.jp>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>
Subject: [PULL 07/45] migration: push Error **errp into qemu_loadvm_state()
Date: Fri, 3 Oct 2025 11:39:10 -0400 [thread overview]
Message-ID: <20251003153948.1304776-8-peterx@redhat.com> (raw)
In-Reply-To: <20251003153948.1304776-1-peterx@redhat.com>
From: Arun Menon <armenon@redhat.com>
This is an incremental step in converting vmstate loading
code to report error via Error objects instead of directly
printing it to console/monitor.
It is ensured that qemu_loadvm_state() must report an error
in errp, in case of failure.
When postcopy live migration runs, the device states are loaded by
both the qemu coroutine process_incoming_migration_co() and the
postcopy_ram_listen_thread(). Therefore, it is important that the
coroutine also reports the error in case of failure, with
error_report_err(). Otherwise, the source qemu will not display
any errors before going into the postcopy pause state.
Suggested-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Arun Menon <armenon@redhat.com>
Tested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20250918-propagate_tpm_error-v14-7-36f11a6fb9d3@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
---
migration/savevm.h | 2 +-
migration/migration.c | 14 ++++++++++++--
migration/savevm.c | 30 ++++++++++++++++++------------
3 files changed, 31 insertions(+), 15 deletions(-)
diff --git a/migration/savevm.h b/migration/savevm.h
index 2d5e9c7166..b80770b746 100644
--- a/migration/savevm.h
+++ b/migration/savevm.h
@@ -64,7 +64,7 @@ void qemu_savevm_send_colo_enable(QEMUFile *f);
void qemu_savevm_live_state(QEMUFile *f);
int qemu_save_device_state(QEMUFile *f);
-int qemu_loadvm_state(QEMUFile *f);
+int qemu_loadvm_state(QEMUFile *f, Error **errp);
void qemu_loadvm_state_cleanup(MigrationIncomingState *mis);
int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis);
int qemu_load_device_state(QEMUFile *f);
diff --git a/migration/migration.c b/migration/migration.c
index e1ac4d73c2..cba2a39355 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -881,7 +881,7 @@ process_incoming_migration_co(void *opaque)
MIGRATION_STATUS_ACTIVE);
mis->loadvm_co = qemu_coroutine_self();
- ret = qemu_loadvm_state(mis->from_src_file);
+ ret = qemu_loadvm_state(mis->from_src_file, &local_err);
mis->loadvm_co = NULL;
trace_vmstate_downtime_checkpoint("dst-precopy-loadvm-completed");
@@ -908,7 +908,8 @@ process_incoming_migration_co(void *opaque)
}
if (ret < 0) {
- error_setg(&local_err, "load of migration failed: %s", strerror(-ret));
+ error_prepend(&local_err, "load of migration failed: %s: ",
+ strerror(-ret));
goto fail;
}
@@ -935,6 +936,15 @@ fail:
}
exit(EXIT_FAILURE);
+ } else {
+ /*
+ * Report the error here in case that QEMU abruptly exits
+ * when postcopy is enabled.
+ */
+ WITH_QEMU_LOCK_GUARD(&s->error_mutex) {
+ error_report_err(s->error);
+ s->error = NULL;
+ }
}
out:
/* Pairs with the refcount taken in qmp_migrate_incoming() */
diff --git a/migration/savevm.c b/migration/savevm.c
index 5e54651652..88116ed278 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -3159,28 +3159,24 @@ out:
return ret;
}
-int qemu_loadvm_state(QEMUFile *f)
+int qemu_loadvm_state(QEMUFile *f, Error **errp)
{
MigrationState *s = migrate_get_current();
MigrationIncomingState *mis = migration_incoming_get_current();
- Error *local_err = NULL;
int ret;
- if (qemu_savevm_state_blocked(&local_err)) {
- error_report_err(local_err);
+ if (qemu_savevm_state_blocked(errp)) {
return -EINVAL;
}
qemu_loadvm_thread_pool_create(mis);
- ret = qemu_loadvm_state_header(f, &local_err);
+ ret = qemu_loadvm_state_header(f, errp);
if (ret) {
- error_report_err(local_err);
return ret;
}
- if (qemu_loadvm_state_setup(f, &local_err) != 0) {
- error_report_err(local_err);
+ if (qemu_loadvm_state_setup(f, errp) != 0) {
return -EINVAL;
}
@@ -3191,6 +3187,9 @@ int qemu_loadvm_state(QEMUFile *f)
cpu_synchronize_all_pre_loadvm();
ret = qemu_loadvm_state_main(f, mis);
+ if (ret < 0) {
+ error_setg(errp, "Load VM state failed: %d", ret);
+ }
qemu_event_set(&mis->main_thread_load_event);
trace_qemu_loadvm_state_post_main(ret);
@@ -3208,8 +3207,15 @@ int qemu_loadvm_state(QEMUFile *f)
if (migrate_has_error(migrate_get_current()) ||
!qemu_loadvm_thread_pool_wait(s, mis)) {
ret = -EINVAL;
+ error_setg(errp,
+ "Error while loading vmstate");
} else {
ret = qemu_file_get_error(f);
+ if (ret < 0) {
+ error_setg(errp,
+ "Error while loading vmstate: stream error: %d",
+ ret);
+ }
}
}
/*
@@ -3474,6 +3480,7 @@ void qmp_xen_save_devices_state(const char *filename, bool has_live, bool live,
void qmp_xen_load_devices_state(const char *filename, Error **errp)
{
+ ERRP_GUARD();
QEMUFile *f;
QIOChannelFile *ioc;
int ret;
@@ -3495,10 +3502,10 @@ void qmp_xen_load_devices_state(const char *filename, Error **errp)
f = qemu_file_new_input(QIO_CHANNEL(ioc));
object_unref(OBJECT(ioc));
- ret = qemu_loadvm_state(f);
+ ret = qemu_loadvm_state(f, errp);
qemu_fclose(f);
if (ret < 0) {
- error_setg(errp, "loading Xen device state failed");
+ error_prepend(errp, "loading Xen device state failed: ");
}
migration_incoming_state_destroy();
}
@@ -3569,13 +3576,12 @@ bool load_snapshot(const char *name, const char *vmstate,
ret = -EINVAL;
goto err_drain;
}
- ret = qemu_loadvm_state(f);
+ ret = qemu_loadvm_state(f, errp);
migration_incoming_state_destroy();
bdrv_drain_all_end();
if (ret < 0) {
- error_setg(errp, "Error %d while loading VM state", ret);
return false;
}
--
2.50.1
next prev parent reply other threads:[~2025-10-03 15:49 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-03 15:39 [PULL 00/45] Staging patches Peter Xu
2025-10-03 15:39 ` [PULL 01/45] migration: push Error **errp into vmstate_subsection_load() Peter Xu
2025-10-03 15:39 ` [PULL 02/45] migration: push Error **errp into vmstate_load_state() Peter Xu
2025-10-03 15:39 ` [PULL 03/45] migration: push Error **errp into qemu_loadvm_state_header() Peter Xu
2025-10-03 15:39 ` [PULL 04/45] migration: push Error **errp into vmstate_load() Peter Xu
2025-10-03 15:39 ` [PULL 05/45] migration: push Error **errp into loadvm_process_command() Peter Xu
2025-10-03 15:39 ` [PULL 06/45] migration: push Error **errp into loadvm_handle_cmd_packaged() Peter Xu
2025-10-03 15:39 ` Peter Xu [this message]
2025-10-03 15:39 ` [PULL 08/45] migration: push Error **errp into qemu_load_device_state() Peter Xu
2025-10-03 15:39 ` [PULL 09/45] migration: push Error **errp into qemu_loadvm_state_main() Peter Xu
2025-10-03 15:39 ` [PULL 10/45] migration: push Error **errp into qemu_loadvm_section_start_full() Peter Xu
2025-10-03 15:39 ` [PULL 11/45] migration: push Error **errp into qemu_loadvm_section_part_end() Peter Xu
2025-10-03 15:39 ` [PULL 12/45] migration: Update qemu_file_get_return_path() docs and remove dead checks Peter Xu
2025-10-03 15:39 ` [PULL 13/45] migration: make loadvm_postcopy_handle_resume() void Peter Xu
2025-10-03 15:39 ` [PULL 14/45] migration: push Error **errp into ram_postcopy_incoming_init() Peter Xu
2025-10-03 15:39 ` [PULL 15/45] migration: push Error **errp into loadvm_postcopy_handle_advise() Peter Xu
2025-10-03 15:39 ` [PULL 16/45] migration: push Error **errp into loadvm_postcopy_handle_listen() Peter Xu
2025-10-03 15:39 ` [PULL 17/45] migration: push Error **errp into loadvm_postcopy_handle_run() Peter Xu
2025-10-03 15:39 ` [PULL 18/45] migration: push Error **errp into loadvm_postcopy_ram_handle_discard() Peter Xu
2025-10-03 15:39 ` [PULL 19/45] migration: push Error **errp into loadvm_handle_recv_bitmap() Peter Xu
2025-10-03 15:39 ` [PULL 20/45] migration: Return -1 on memory allocation failure in ram.c Peter Xu
2025-10-03 15:39 ` [PULL 21/45] migration: push Error **errp into loadvm_process_enable_colo() Peter Xu
2025-10-03 15:39 ` [PULL 22/45] migration: push Error **errp into loadvm_postcopy_handle_switchover_start() Peter Xu
2025-10-03 15:39 ` [PULL 23/45] migration: Capture error in postcopy_ram_listen_thread() Peter Xu
2025-10-03 15:39 ` [PULL 24/45] migration: Remove error variant of vmstate_save_state() function Peter Xu
2025-10-03 15:39 ` [PULL 25/45] migration: Add error-parameterized function variants in VMSD struct Peter Xu
2025-10-03 15:39 ` [PULL 26/45] backends/tpm: Propagate vTPM error on migration failure Peter Xu
2025-10-03 15:39 ` [PULL 27/45] io/crypto: Move tls premature termination handling into QIO layer Peter Xu
2025-10-10 8:00 ` iotest 233 is failing (was: [PULL 27/45] io/crypto: Move tls premature termination handling into QIO layer) Thomas Huth
2025-10-10 8:35 ` iotest 233 is failing Thomas Huth
2025-10-03 15:39 ` [PULL 28/45] migration: Make migration_has_failed() work even for CANCELLING Peter Xu
2025-10-03 15:39 ` [PULL 29/45] migration: HMP: Adjust the order of output fields Peter Xu
2025-10-03 15:39 ` [PULL 30/45] migration/multifd/tls: Cleanup BYE message processing on sender side Peter Xu
2025-10-03 15:39 ` [PULL 31/45] migration: Fix state transition in postcopy_start() error handling Peter Xu
2025-10-03 15:39 ` [PULL 32/45] migration: ensure APIC is loaded prior to VFIO PCI devices Peter Xu
2025-10-03 15:39 ` [PULL 33/45] include/system/memory.h: Clarify address_space_destroy() behaviour Peter Xu
2025-10-03 15:39 ` [PULL 34/45] memory: New AS helper to serialize destroy+free Peter Xu
2025-10-03 15:39 ` [PULL 35/45] physmem: Destroy all CPU AddressSpaces on unrealize Peter Xu
2025-10-03 15:39 ` [PULL 36/45] migration: simplify error reporting after channel read Peter Xu
2025-10-03 15:39 ` [PULL 37/45] migration: multi-mode notifier Peter Xu
2025-10-03 15:39 ` [PULL 38/45] migration: add cpr_walk_fd Peter Xu
2025-10-03 15:39 ` [PULL 39/45] oslib: qemu_clear_cloexec Peter Xu
2025-10-03 15:39 ` [PULL 40/45] migration: cpr-exec-command parameter Peter Xu
2025-10-03 15:39 ` [PULL 41/45] migration: cpr-exec save and load Peter Xu
2025-10-03 15:39 ` [PULL 42/45] migration: cpr-exec mode Peter Xu
2025-10-03 15:39 ` [PULL 43/45] migration: cpr-exec docs Peter Xu
2025-10-03 15:39 ` [PULL 44/45] vfio: cpr-exec mode Peter Xu
2025-10-03 15:39 ` [PULL 45/45] migration-test: test cpr-exec Peter Xu
2025-10-04 17:53 ` [PULL 00/45] Staging patches Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251003153948.1304776-8-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=armenon@redhat.com \
--cc=david@redhat.com \
--cc=farosas@suse.de \
--cc=marcandre.lureau@redhat.com \
--cc=odaki@rsg.ci.i.u-tokyo.ac.jp \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).