From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org, Pierrick Bouvier <pierrick.bouvier@linaro.org>
Subject: [PATCH v6 04/73] target/arm: Implement PIR_ELx, PIRE0_ELx, S2PIR_EL2 registers
Date: Fri, 3 Oct 2025 10:06:51 -0700 [thread overview]
Message-ID: <20251003170800.997167-5-richard.henderson@linaro.org> (raw)
In-Reply-To: <20251003170800.997167-1-richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/cpregs.h | 2 ++
target/arm/cpu.h | 4 +++
target/arm/cpu.c | 4 +++
target/arm/helper.c | 69 +++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 79 insertions(+)
diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h
index 57fde5f57a..f48c4df30f 100644
--- a/target/arm/cpregs.h
+++ b/target/arm/cpregs.h
@@ -781,6 +781,8 @@ typedef enum FGTBit {
DO_BIT(HFGRTR, ERRIDR_EL1),
DO_REV_BIT(HFGRTR, NSMPRI_EL1),
DO_REV_BIT(HFGRTR, NTPIDR2_EL0),
+ DO_REV_BIT(HFGRTR, NPIRE0_EL1),
+ DO_REV_BIT(HFGRTR, NPIR_EL1),
/* Trap bits in HDFGRTR_EL2 / HDFGWTR_EL2, starting from bit 0. */
DO_BIT(HDFGRTR, DBGBCRN_EL1),
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 2b9585dc80..55c00f484b 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -368,6 +368,9 @@ typedef struct CPUArchState {
uint64_t tcr2_el[3];
uint64_t vtcr_el2; /* Virtualization Translation Control. */
uint64_t vstcr_el2; /* Secure Virtualization Translation Control. */
+ uint64_t pir_el[4]; /* PIRE0_EL1, PIR_EL1, PIR_EL2, PIR_EL3 */
+ uint64_t pire0_el2;
+ uint64_t s2pir_el2;
uint32_t c2_data; /* MPU data cacheable bits. */
uint32_t c2_insn; /* MPU instruction cacheable bits. */
union { /* MMU domain access control register
@@ -1720,6 +1723,7 @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask)
#define SCR_ENTP2 (1ULL << 41)
#define SCR_TCR2EN (1ULL << 43)
#define SCR_SCTLR2EN (1ULL << 44)
+#define SCR_PIEN (1ULL << 45)
#define SCR_GPF (1ULL << 48)
#define SCR_NSE (1ULL << 62)
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 30e29fd315..9bca1b8eae 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -641,6 +641,10 @@ void arm_emulate_firmware_reset(CPUState *cpustate, int target_el)
if (cpu_isar_feature(aa64_sctlr2, cpu)) {
env->cp15.scr_el3 |= SCR_SCTLR2EN;
}
+ if (cpu_isar_feature(aa64_s1pie, cpu) ||
+ cpu_isar_feature(aa64_s2pie, cpu)) {
+ env->cp15.scr_el3 |= SCR_PIEN;
+ }
}
if (target_el == 2) {
diff --git a/target/arm/helper.c b/target/arm/helper.c
index a2149c105a..c9a8012880 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -770,6 +770,10 @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
if (cpu_isar_feature(aa64_sctlr2, cpu)) {
valid_mask |= SCR_SCTLR2EN;
}
+ if (cpu_isar_feature(aa64_s1pie, cpu) ||
+ cpu_isar_feature(aa64_s2pie, cpu)) {
+ valid_mask |= SCR_PIEN;
+ }
} else {
valid_mask &= ~(SCR_RW | SCR_ST);
if (cpu_isar_feature(aa32_ras, cpu)) {
@@ -5935,6 +5939,64 @@ static const ARMCPRegInfo tcr2_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.tcr2_el[2]) },
};
+static CPAccessResult pien_access(CPUARMState *env, const ARMCPRegInfo *ri,
+ bool isread)
+{
+ if (arm_feature(env, ARM_FEATURE_EL3)
+ && !(env->cp15.scr_el3 & SCR_PIEN)
+ && arm_current_el(env) < 3) {
+ return CP_ACCESS_TRAP_EL3;
+ }
+ return CP_ACCESS_OK;
+}
+
+static CPAccessResult pien_el1_access(CPUARMState *env, const ARMCPRegInfo *ri,
+ bool isread)
+{
+ CPAccessResult ret = access_tvm_trvm(env, ri, isread);
+ if (ret == CP_ACCESS_OK) {
+ ret = pien_access(env, ri, isread);
+ }
+ return ret;
+}
+
+static const ARMCPRegInfo s1pie_reginfo[] = {
+ { .name = "PIR_EL1", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 0, .opc2 = 3, .crn = 10, .crm = 2,
+ .access = PL1_RW, .accessfn = pien_el1_access,
+ .fgt = FGT_NPIR_EL1, .nv2_redirect_offset = 0x2a0 | NV2_REDIR_NV1,
+ .vhe_redir_to_el2 = ENCODE_AA64_CP_REG(3, 4, 10, 2, 3),
+ .vhe_redir_to_el01 = ENCODE_AA64_CP_REG(3, 5, 10, 2, 3),
+ .fieldoffset = offsetof(CPUARMState, cp15.pir_el[1]) },
+ { .name = "PIR_EL2", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 4, .opc2 = 3, .crn = 10, .crm = 2,
+ .access = PL2_RW, .accessfn = pien_access,
+ .fieldoffset = offsetof(CPUARMState, cp15.pir_el[2]) },
+ { .name = "PIR_EL3", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 6, .opc2 = 3, .crn = 10, .crm = 2,
+ .access = PL3_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.pir_el[3]) },
+ { .name = "PIRE0_EL1", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 0, .opc2 = 2, .crn = 10, .crm = 2,
+ .access = PL1_RW, .accessfn = pien_el1_access,
+ .fgt = FGT_NPIRE0_EL1, .nv2_redirect_offset = 0x290 | NV2_REDIR_NV1,
+ .vhe_redir_to_el2 = ENCODE_AA64_CP_REG(3, 4, 10, 2, 2),
+ .vhe_redir_to_el01 = ENCODE_AA64_CP_REG(3, 5, 10, 2, 2),
+ .fieldoffset = offsetof(CPUARMState, cp15.pir_el[0]) },
+ { .name = "PIRE0_EL2", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 4, .opc2 = 2, .crn = 10, .crm = 2,
+ .access = PL2_RW, .accessfn = pien_access,
+ .fieldoffset = offsetof(CPUARMState, cp15.pire0_el2) },
+};
+
+static const ARMCPRegInfo s2pie_reginfo[] = {
+ { .name = "S2PIR_EL2", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 4, .opc2 = 5, .crn = 10, .crm = 2,
+ .access = PL2_RW, .accessfn = pien_access,
+ .nv2_redirect_offset = 0x2b0,
+ .fieldoffset = offsetof(CPUARMState, cp15.s2pir_el2) },
+};
+
void register_cp_regs_for_features(ARMCPU *cpu)
{
/* Register all the coprocessor registers based on feature bits */
@@ -7167,6 +7229,13 @@ void register_cp_regs_for_features(ARMCPU *cpu)
define_arm_cp_regs(cpu, tcr2_reginfo);
}
+ if (cpu_isar_feature(aa64_s1pie, cpu)) {
+ define_arm_cp_regs(cpu, s1pie_reginfo);
+ }
+ if (cpu_isar_feature(aa64_s2pie, cpu)) {
+ define_arm_cp_regs(cpu, s2pie_reginfo);
+ }
+
if (cpu_isar_feature(any_predinv, cpu)) {
define_arm_cp_regs(cpu, predinv_reginfo);
}
--
2.43.0
next prev parent reply other threads:[~2025-10-03 17:09 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-03 17:06 [PATCH v6 00/73] target/arm: Implement FEAT_GCS Richard Henderson
2025-10-03 17:06 ` [PATCH v6 01/73] tests/functional: update tests using TF-A/TF-RMM to support FEAT_GCS Richard Henderson
2025-10-03 17:06 ` [PATCH v6 02/73] target/arm: Add isar feature test for FEAT_S1PIE, FEAT_S2PIE Richard Henderson
2025-10-03 17:06 ` [PATCH v6 03/73] target/arm: Enable TCR2_ELx.PIE Richard Henderson
2025-10-03 17:06 ` Richard Henderson [this message]
2025-10-03 17:06 ` [PATCH v6 05/73] target/arm: Force HPD for stage2 translations Richard Henderson
2025-10-03 17:06 ` [PATCH v6 06/73] target/arm: Cache NV1 early in get_phys_addr_lpae Richard Henderson
2025-10-03 17:06 ` [PATCH v6 07/73] target/arm: Populate PIE in aa64_va_parameters Richard Henderson
2025-10-03 17:06 ` [PATCH v6 08/73] target/arm: Implement get_S1prot_indirect Richard Henderson
2025-10-03 17:06 ` [PATCH v6 09/73] target/arm: Implement get_S2prot_indirect Richard Henderson
2025-10-03 17:06 ` [PATCH v6 10/73] target/arm: Expand CPUARMState.exception.syndrome to 64 bits Richard Henderson
2025-10-03 17:06 ` [PATCH v6 11/73] target/arm: Expand syndrome parameter to raise_exception* Richard Henderson
2025-10-03 17:06 ` [PATCH v6 12/73] target/arm: Implement dirtybit check for PIE Richard Henderson
2025-10-03 17:07 ` [PATCH v6 13/73] target/arm: Enable FEAT_S1PIE and FEAT_S2PIE on -cpu max Richard Henderson
2025-10-03 17:07 ` [PATCH v6 14/73] include/exec/memopidx: Adjust for 32 mmu indexes Richard Henderson
2025-10-03 17:07 ` [PATCH v6 15/73] include/hw/core/cpu: Widen MMUIdxMap Richard Henderson
2025-10-03 17:07 ` [PATCH v6 16/73] target/arm: Split out mmuidx.h from cpu.h Richard Henderson
2025-10-03 17:07 ` [PATCH v6 17/73] target/arm: Convert arm_mmu_idx_to_el from switch to table Richard Henderson
2025-10-03 17:07 ` [PATCH v6 18/73] target/arm: Remove unused env argument from regime_el Richard Henderson
2025-10-03 17:07 ` [PATCH v6 19/73] target/arm: Convert regime_el from switch to table Richard Henderson
2025-10-03 17:07 ` [PATCH v6 20/73] target/arm: Convert regime_has_2_ranges " Richard Henderson
2025-10-03 17:07 ` [PATCH v6 21/73] target/arm: Remove unused env argument from regime_is_pan Richard Henderson
2025-10-03 17:07 ` [PATCH v6 22/73] target/arm: Convert regime_is_pan from switch to table Richard Henderson
2025-10-03 17:07 ` [PATCH v6 23/73] target/arm: Remove unused env argument from regime_is_user Richard Henderson
2025-10-03 17:07 ` [PATCH v6 24/73] target/arm: Convert regime_is_user from switch to table Richard Henderson
2025-10-03 17:07 ` [PATCH v6 25/73] target/arm: Convert arm_mmu_idx_is_stage1_of_2 " Richard Henderson
2025-10-03 17:07 ` [PATCH v6 26/73] target/arm: Convert regime_is_stage2 " Richard Henderson
2025-10-03 17:07 ` [PATCH v6 27/73] target/arm: Introduce mmu indexes for GCS Richard Henderson
2025-10-03 17:07 ` [PATCH v6 28/73] target/arm: Introduce regime_to_gcs Richard Henderson
2025-10-03 17:07 ` [PATCH v6 29/73] target/arm: Support page protections for GCS mmu indexes Richard Henderson
2025-10-03 17:07 ` [PATCH v6 30/73] target/arm: Implement gcs bit for data abort Richard Henderson
2025-10-03 17:07 ` [PATCH v6 31/73] target/arm: Add GCS cpregs Richard Henderson
2025-10-03 17:07 ` [PATCH v6 32/73] target/arm: Add GCS enable and trap levels to DisasContext Richard Henderson
2025-10-03 17:07 ` [PATCH v6 33/73] target/arm: Implement FEAT_CHK Richard Henderson
2025-10-03 17:07 ` [PATCH v6 34/73] target/arm: Make helper_exception_return system-only Richard Henderson
2025-10-07 9:54 ` Peter Maydell
2025-10-03 17:07 ` [PATCH v6 35/73] target/arm: Export cpsr_{read_for, write_from}_spsr_elx Richard Henderson
2025-10-07 9:56 ` Peter Maydell
2025-10-03 17:07 ` [PATCH v6 36/73] target/arm: Expand pstate to 64 bits Richard Henderson
2025-10-07 9:58 ` Peter Maydell
2025-10-03 17:07 ` [PATCH v6 37/73] target/arm: Add syndrome data for EC_GCS Richard Henderson
2025-10-03 17:07 ` [PATCH v6 38/73] target/arm: Add arm_hcr_el2_nvx_eff Richard Henderson
2025-10-07 10:13 ` Peter Maydell
2025-10-03 17:07 ` [PATCH v6 39/73] target/arm: Use arm_hcr_el2_nvx_eff in access_nv1 Richard Henderson
2025-10-07 10:13 ` Peter Maydell
2025-10-03 17:07 ` [PATCH v6 40/73] target/arm: Split out access_nv1_with_nvx Richard Henderson
2025-10-07 10:14 ` Peter Maydell
2025-10-03 17:07 ` [PATCH v6 41/73] target/arm: Implement EXLOCKException for ELR_ELx and SPSR_ELx Richard Henderson
2025-10-03 17:07 ` [PATCH v6 42/73] target/arm: Split {full,core}_a64_user_mem_index Richard Henderson
2025-10-03 17:07 ` [PATCH v6 43/73] target/arm: Introduce delay_exception{_el} Richard Henderson
2025-10-03 17:07 ` [PATCH v6 44/73] target/arm: Emit HSTR trap exception out of line Richard Henderson
2025-10-03 17:07 ` [PATCH v6 45/73] target/arm: Emit v7m LTPSIZE " Richard Henderson
2025-10-03 17:07 ` [PATCH v6 46/73] target/arm: Implement GCSSTR, GCSSTTR Richard Henderson
2025-10-03 17:07 ` [PATCH v6 47/73] target/arm: Implement GCSB Richard Henderson
2025-10-03 17:07 ` [PATCH v6 48/73] target/arm: Implement GCSPUSHM Richard Henderson
2025-10-07 10:17 ` Peter Maydell
2025-10-07 14:03 ` Richard Henderson
2025-10-03 17:07 ` [PATCH v6 49/73] target/arm: Implement GCSPOPM Richard Henderson
2025-10-03 17:07 ` [PATCH v6 50/73] target/arm: Implement GCSPUSHX Richard Henderson
2025-10-03 17:07 ` [PATCH v6 51/73] target/arm: Implement GCSPOPX Richard Henderson
2025-10-03 17:07 ` [PATCH v6 52/73] target/arm: Implement GCSPOPCX Richard Henderson
2025-10-03 17:07 ` [PATCH v6 53/73] target/arm: Implement GCSSS1 Richard Henderson
2025-10-03 17:07 ` [PATCH v6 54/73] target/arm: Implement GCSSS2 Richard Henderson
2025-10-03 17:07 ` [PATCH v6 55/73] target/arm: Add gcs record for BL Richard Henderson
2025-10-03 17:07 ` [PATCH v6 56/73] target/arm: Add gcs record for BLR Richard Henderson
2025-10-03 17:07 ` [PATCH v6 57/73] target/arm: Add gcs record for BLR with PAuth Richard Henderson
2025-10-03 17:07 ` [PATCH v6 58/73] target/arm: Load gcs record for RET Richard Henderson
2025-10-03 17:07 ` [PATCH v6 59/73] target/arm: Load gcs record for RET with PAuth Richard Henderson
2025-10-03 17:07 ` [PATCH v6 60/73] target/arm: Copy EXLOCKEn to EXLOCK on exception to the same EL Richard Henderson
2025-10-03 17:07 ` [PATCH v6 61/73] target/arm: Implement EXLOCK check during exception return Richard Henderson
2025-10-03 17:07 ` [PATCH v6 62/73] target/arm: Enable FEAT_GCS with -cpu max Richard Henderson
2025-10-03 17:07 ` [PATCH v6 63/73] linux-user/aarch64: Implement prctls for GCS Richard Henderson
2025-10-03 17:07 ` [PATCH v6 64/73] linux-user/aarch64: Allocate new gcs stack on clone Richard Henderson
2025-10-03 17:07 ` [PATCH v6 65/73] linux-user/aarch64: Release gcs stack on thread exit Richard Henderson
2025-10-03 17:07 ` [PATCH v6 66/73] linux-user/aarch64: Implement map_shadow_stack syscall Richard Henderson
2025-10-03 17:07 ` [PATCH v6 67/73] target/arm: Enable GCSPR_EL0 for read in user-mode Richard Henderson
2025-10-03 17:07 ` [PATCH v6 68/73] linux-user/aarch64: Inject SIGSEGV for GCS faults Richard Henderson
2025-10-03 17:07 ` [PATCH v6 69/73] linux-user/aarch64: Generate GCS signal records Richard Henderson
2025-10-03 17:07 ` [PATCH v6 70/73] linux-user/aarch64: Enable GCS in HWCAP Richard Henderson
2025-10-03 17:07 ` [PATCH v6 71/73] tests/tcg/aarch64: Add gcsstr Richard Henderson
2025-10-03 17:07 ` [PATCH v6 72/73] tests/tcg/aarch64: Add gcspushm Richard Henderson
2025-10-03 17:08 ` [PATCH v6 73/73] tests/tcg/aarch64: Add gcsss Richard Henderson
2025-10-07 14:26 ` [PATCH v6 00/73] target/arm: Implement FEAT_GCS Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251003170800.997167-5-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=pierrick.bouvier@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).