From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Paolo Bonzini" <pbonzini@redhat.com>,
"Yanan Wang" <wangyanan55@huawei.com>,
"Markus Armbruster" <armbru@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Gerd Hoffmann" <kraxel@redhat.com>,
"Fabiano Rosas" <farosas@suse.de>,
"Eric Blake" <eblake@redhat.com>,
"Dr. David Alan Gilbert" <dave@treblig.org>,
"Laurent Vivier" <lvivier@redhat.com>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"Zhao Liu" <zhao1.liu@intel.com>,
"Eduardo Habkost" <eduardo@habkost.net>
Subject: [PATCH v3] hw/uefi: add "info firmware-log" + "query-firmware-log" monitor commands
Date: Fri, 10 Oct 2025 09:10:08 +0200 [thread overview]
Message-ID: <20251010071008.2555267-1-kraxel@redhat.com> (raw)
Starting with the edk2-stable202508 tag OVMF (and ArmVirt too) have
optional support for logging to a memory buffer. There is guest side
support -- for example in linux kernels v6.17+ -- to read that buffer.
But that might not helpful if your guest stops booting early enough that
guest tooling can not be used yet. So host side support to read that
log buffer is a useful thing to have.
This patch implements both qmp and hmp monitor commands to read the
firmware log.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
include/monitor/hmp.h | 1 +
hw/uefi/ovmf-log.c | 265 +++++++++++++++++++++++++++++++++++++
tests/qtest/qmp-cmd-test.c | 2 +
hmp-commands-info.hx | 14 ++
hw/uefi/meson.build | 2 +-
qapi/machine.json | 23 ++++
6 files changed, 306 insertions(+), 1 deletion(-)
create mode 100644 hw/uefi/ovmf-log.c
diff --git a/include/monitor/hmp.h b/include/monitor/hmp.h
index ae116d9804a3..885c0ecd2aed 100644
--- a/include/monitor/hmp.h
+++ b/include/monitor/hmp.h
@@ -178,5 +178,6 @@ void hmp_boot_set(Monitor *mon, const QDict *qdict);
void hmp_info_mtree(Monitor *mon, const QDict *qdict);
void hmp_info_cryptodev(Monitor *mon, const QDict *qdict);
void hmp_dumpdtb(Monitor *mon, const QDict *qdict);
+void hmp_info_firmware_log(Monitor *mon, const QDict *qdict);
#endif
diff --git a/hw/uefi/ovmf-log.c b/hw/uefi/ovmf-log.c
new file mode 100644
index 000000000000..89e27d916531
--- /dev/null
+++ b/hw/uefi/ovmf-log.c
@@ -0,0 +1,265 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * print ovmf debug log
+ *
+ * see OvmfPkg/Library/MemDebugLogLib/ in edk2
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu/base64.h"
+#include "qemu/target-info-qapi.h"
+#include "hw/boards.h"
+#include "hw/i386/x86.h"
+#include "hw/arm/virt.h"
+#include "system/dma.h"
+#include "monitor/hmp.h"
+#include "monitor/monitor.h"
+#include "qapi/error.h"
+#include "qapi/type-helpers.h"
+#include "qapi/qapi-commands-machine.h"
+
+
+/* ----------------------------------------------------------------------- */
+/* copy from edk2 */
+
+#define MEM_DEBUG_LOG_MAGIC1 0x3167646d666d766f /* "ovmfmdg1" */
+#define MEM_DEBUG_LOG_MAGIC2 0x3267646d666d766f /* "ovmfmdg2" */
+
+/*
+ * Mem Debug Log buffer header.
+ * The Log buffer is circular. Only the most
+ * recent messages are retained. Older messages
+ * will be discarded if the buffer overflows.
+ * The Debug Log starts just after the header.
+ */
+typedef struct {
+ /*
+ * Magic values
+ * These fields are used by tools to locate the buffer in
+ * memory. These MUST be the first two fields of the structure.
+ * Use a 128 bit Magic to vastly reduce the possibility of
+ * a collision with random data in memory.
+ */
+ uint64_t Magic1;
+ uint64_t Magic2;
+ /*
+ * Header Size
+ * This MUST be the third field of the structure
+ */
+ uint64_t HeaderSize;
+ /*
+ * Debug log size (minus header)
+ */
+ uint64_t DebugLogSize;
+ /*
+ * edk2 uses this for locking access.
+ */
+ uint64_t MemDebugLogLock;
+ /*
+ * Debug log head offset
+ */
+ uint64_t DebugLogHeadOffset;
+ /*
+ * Debug log tail offset
+ */
+ uint64_t DebugLogTailOffset;
+ /*
+ * Flag to indicate if the buffer wrapped and was thus truncated.
+ */
+ uint64_t Truncated;
+ /*
+ * Firmware Build Version (PcdFirmwareVersionString)
+ */
+ char FirmwareVersion[128];
+} MEM_DEBUG_LOG_HDR;
+
+
+/* ----------------------------------------------------------------------- */
+/* qemu monitor command */
+
+typedef struct {
+ uint64_t Magic1;
+ uint64_t Magic2;
+} MEM_DEBUG_LOG_MAGIC;
+
+/* find log buffer in guest memory by searching for the magic cookie */
+static dma_addr_t find_ovmf_log_range(dma_addr_t start, dma_addr_t end)
+{
+ static const MEM_DEBUG_LOG_MAGIC magic = {
+ .Magic1 = MEM_DEBUG_LOG_MAGIC1,
+ .Magic2 = MEM_DEBUG_LOG_MAGIC2,
+ };
+ MEM_DEBUG_LOG_MAGIC check;
+ dma_addr_t step = 4 * KiB;
+ dma_addr_t offset;
+
+ for (offset = start; offset < end; offset += step) {
+ if (dma_memory_read(&address_space_memory, offset,
+ &check, sizeof(check),
+ MEMTXATTRS_UNSPECIFIED)) {
+ /* dma error -> stop searching */
+ break;
+ }
+ if (memcmp(&magic, &check, sizeof(check)) == 0) {
+ return offset;
+ }
+ }
+ return -1;
+}
+
+static dma_addr_t find_ovmf_log(void)
+{
+ MachineState *ms = MACHINE(qdev_get_machine());
+ dma_addr_t start, end, offset;
+
+ if (target_arch() == SYS_EMU_TARGET_X86_64 &&
+ object_dynamic_cast(OBJECT(ms), TYPE_X86_MACHINE)) {
+ X86MachineState *x86ms = X86_MACHINE(ms);
+
+ /* early log buffer, static allocation in memfd, sec + early pei */
+ offset = find_ovmf_log_range(0x800000, 0x900000);
+ if (offset != -1) {
+ return offset;
+ }
+
+ /*
+ * normal log buffer, dynamically allocated close to end of low memory,
+ * late pei + dxe phase
+ */
+ end = x86ms->below_4g_mem_size;
+ start = end - MIN(end, 128 * MiB);
+ offset = find_ovmf_log_range(start, end);
+ return offset;
+ }
+
+ if (target_arch() == SYS_EMU_TARGET_AARCH64 &&
+ object_dynamic_cast(OBJECT(ms), TYPE_VIRT_MACHINE)) {
+ /* edk2 ArmVirt firmware allocations are in the first 128 MB */
+ VirtMachineState *vms = VIRT_MACHINE(ms);
+ start = vms->memmap[VIRT_MEM].base;
+ end = start + 128 * MiB;
+ offset = find_ovmf_log_range(start, end);
+ return offset;
+ }
+
+ return -1;
+}
+
+static void handle_ovmf_log_range(GString *out,
+ dma_addr_t start,
+ dma_addr_t end,
+ Error **errp)
+{
+ g_autofree char *buf = NULL;
+
+ if (start > end) {
+ return;
+ }
+
+ buf = g_malloc(end - start + 1);
+ if (dma_memory_read(&address_space_memory, start,
+ buf, end - start,
+ MEMTXATTRS_UNSPECIFIED)) {
+ error_setg(errp, "firmware log: buffer read error");
+ return;
+ }
+
+ buf[end - start] = 0;
+ g_string_append_printf(out, "%s", buf);
+}
+
+FirmwareLog *qmp_query_firmware_log(Error **errp)
+{
+ MEM_DEBUG_LOG_HDR header;
+ dma_addr_t offset, base;
+ FirmwareLog *ret;
+ g_autoptr(GString) log = g_string_new("");
+
+ offset = find_ovmf_log();
+ if (offset == -1) {
+ error_setg(errp, "firmware log: not found");
+ return NULL;
+ }
+
+ if (dma_memory_read(&address_space_memory, offset,
+ &header, sizeof(header),
+ MEMTXATTRS_UNSPECIFIED)) {
+ error_setg(errp, "firmware log: header read error");
+ return NULL;
+ }
+
+ if (header.DebugLogSize > MiB) {
+ /* default size is 128k (32 pages), allow up to 1M */
+ error_setg(errp, "firmware log: log buffer is too big");
+ return NULL;
+ }
+
+ if (header.DebugLogHeadOffset > header.DebugLogSize ||
+ header.DebugLogTailOffset > header.DebugLogSize) {
+ error_setg(errp, "firmware log: invalid header");
+ return NULL;
+ }
+
+ base = offset + header.HeaderSize;
+ if (header.DebugLogHeadOffset > header.DebugLogTailOffset) {
+ /* wrap around */
+ handle_ovmf_log_range(log,
+ base + header.DebugLogHeadOffset,
+ base + header.DebugLogSize,
+ errp);
+ if (*errp) {
+ return NULL;
+ }
+ handle_ovmf_log_range(log,
+ base + 0,
+ base + header.DebugLogTailOffset,
+ errp);
+ if (*errp) {
+ return NULL;
+ }
+ } else {
+ handle_ovmf_log_range(log,
+ base + header.DebugLogHeadOffset,
+ base + header.DebugLogTailOffset,
+ errp);
+ if (*errp) {
+ return NULL;
+ }
+ }
+
+ ret = g_new0(FirmwareLog, 1);
+ ret->version = g_strdup(header.FirmwareVersion);
+ ret->log = g_base64_encode((const guchar *)log->str, log->len);
+ return ret;
+}
+
+void hmp_info_firmware_log(Monitor *mon, const QDict *qdict)
+{
+ Error *errp = NULL;
+ FirmwareLog *log;
+
+ log = qmp_query_firmware_log(&errp);
+ if (errp) {
+ monitor_printf(mon, "ERROR: %s\n", error_get_pretty(errp));
+ return;
+ }
+
+ g_assert(log != NULL);
+
+ if (log->version) {
+ monitor_printf(mon, "[ firmware version: %s ]\n", log->version);
+ }
+
+ if (log->log) {
+ size_t outlen;
+ uint8_t *out = qbase64_decode(log->log, -1, &outlen, &errp);
+ if (errp) {
+ monitor_printf(mon, "ERROR: %s\n", error_get_pretty(errp));
+ return;
+ }
+ monitor_printf(mon, "%s\n", out);
+ g_free(out);
+ }
+}
diff --git a/tests/qtest/qmp-cmd-test.c b/tests/qtest/qmp-cmd-test.c
index cf718761861d..ffdb7e979e0f 100644
--- a/tests/qtest/qmp-cmd-test.c
+++ b/tests/qtest/qmp-cmd-test.c
@@ -52,6 +52,8 @@ static int query_error_class(const char *cmd)
/* Only valid with accel=tcg */
{ "x-query-jit", ERROR_CLASS_GENERIC_ERROR },
{ "xen-event-list", ERROR_CLASS_GENERIC_ERROR },
+ /* requires firmware with memory buffer logging support */
+ { "query-ovmf-log", ERROR_CLASS_GENERIC_ERROR },
{ NULL, -1 }
};
int i;
diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
index 6142f60e7b16..257015f0b403 100644
--- a/hmp-commands-info.hx
+++ b/hmp-commands-info.hx
@@ -977,3 +977,17 @@ SRST
``info cryptodev``
Show the crypto devices.
ERST
+
+ {
+ .name = "firmware-log",
+ .args_type = "",
+ .params = "",
+ .help = "show the firmware (ovmf) debug log",
+ .cmd = hmp_info_firmware_log,
+ .flags = "p",
+ },
+
+SRST
+ ``info firmware-log``
+ Show the firmware (ovmf) debug log.
+ERST
diff --git a/hw/uefi/meson.build b/hw/uefi/meson.build
index 91eb95f89e6d..c8f38dfae247 100644
--- a/hw/uefi/meson.build
+++ b/hw/uefi/meson.build
@@ -1,4 +1,4 @@
-system_ss.add(files('hardware-info.c'))
+system_ss.add(files('hardware-info.c', 'ovmf-log.c'))
uefi_vars_ss = ss.source_set()
if (config_all_devices.has_key('CONFIG_UEFI_VARS'))
diff --git a/qapi/machine.json b/qapi/machine.json
index 038eab281c78..c96e582afdd6 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -1839,6 +1839,29 @@
'returns': 'HumanReadableText',
'features': [ 'unstable' ]}
+##
+# @FirmwareLog:
+#
+# @version: Firmware version.
+#
+# @log: Firmware debug log, in base64 encoding.
+#
+# Since: 10.2
+##
+{ 'struct': 'FirmwareLog',
+ 'data': { '*version': 'str',
+ '*log': 'str' } }
+
+##
+# @query-firmware-log:
+#
+# Find firmware memory log buffer in guest memory, return content.
+#
+# Since: 10.2
+##
+{ 'command': 'query-firmware-log',
+ 'returns': 'FirmwareLog' }
+
##
# @dump-skeys:
#
--
2.51.0
next reply other threads:[~2025-10-10 7:10 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-10 7:10 Gerd Hoffmann [this message]
2025-10-10 9:12 ` [PATCH v3] hw/uefi: add "info firmware-log" + "query-firmware-log" monitor commands Daniel P. Berrangé
2025-10-10 9:27 ` Gerd Hoffmann
2025-10-10 9:31 ` Daniel P. Berrangé
2025-10-13 8:42 ` Gerd Hoffmann
2025-10-10 11:41 ` Markus Armbruster
2025-10-10 17:36 ` Markus Armbruster
2025-10-10 20:23 ` Dr. David Alan Gilbert
2025-10-11 4:43 ` Markus Armbruster
2025-10-11 9:29 ` Markus Armbruster
2025-10-13 9:19 ` Gerd Hoffmann
2025-10-13 10:43 ` Markus Armbruster
2025-10-13 11:47 ` Gerd Hoffmann
2025-10-10 20:36 ` Dr. David Alan Gilbert
2025-10-13 11:55 ` Gerd Hoffmann
2025-10-13 13:12 ` Dr. David Alan Gilbert
2025-10-13 19:11 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251010071008.2555267-1-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=armbru@redhat.com \
--cc=dave@treblig.org \
--cc=eblake@redhat.com \
--cc=eduardo@habkost.net \
--cc=farosas@suse.de \
--cc=lvivier@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=pbonzini@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=wangyanan55@huawei.com \
--cc=zhao1.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).