From: Jamin Lin via <qemu-devel@nongnu.org>
To: "Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"open list:All patches CC here" <qemu-devel@nongnu.org>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>
Cc: <jamin_lin@aspeedtech.com>, <troy_lee@aspeedtech.com>,
<kane_chen@aspeedtech.com>
Subject: [PATCH v2 13/17] hw/arm/aspeed: Split Catalina machine into a separate source file for maintainability
Date: Wed, 29 Oct 2025 12:36:59 +0800 [thread overview]
Message-ID: <20251029043710.1486573-14-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20251029043710.1486573-1-jamin_lin@aspeedtech.com>
This commit moves the Facebook Catalina BMC machine implementation out of
aspeed.c into a new standalone file aspeed_ast2600_catalina.c.
This refactor continues the ongoing modularization of Aspeed platform
support, organizing each board’s logic into its own dedicated source file.
It improves maintainability, readability, and simplifies future
development of new BMC platforms without cluttering aspeed.c.
Key updates include:
- Moved CATALINA_BMC_HW_STRAP1 and CATALINA_BMC_HW_STRAP2 macro definitions
into the new file.
- Moved catalina_bmc_i2c_init() and all Catalina-specific I2C device setup
into the new aspeed_ast2600_catalina.c file.
- Moved aspeed_machine_catalina_class_init() and type registration logic
out of aspeed.c.
- Cleaned up all Catalina-specific code and macros from aspeed.c.
- Added aspeed_ast2600_catalina.c to the Meson build system (meson.build).
No functional changes.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed.c | 204 ----------------------------
hw/arm/aspeed_ast2600_catalina.c | 224 +++++++++++++++++++++++++++++++
hw/arm/meson.build | 1 +
3 files changed, 225 insertions(+), 204 deletions(-)
create mode 100644 hw/arm/aspeed_ast2600_catalina.c
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 36c3daa903..81099e56b5 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -15,11 +15,9 @@
#include "hw/arm/aspeed.h"
#include "hw/arm/aspeed_soc.h"
#include "hw/block/flash.h"
-#include "hw/i2c/i2c_mux_pca954x.h"
#include "hw/i2c/smbus_eeprom.h"
#include "hw/gpio/pca9552.h"
#include "hw/gpio/pca9554.h"
-#include "hw/nvram/eeprom_at24c.h"
#include "hw/sensor/tmp105.h"
#include "hw/misc/led.h"
#include "hw/qdev-properties.h"
@@ -294,184 +292,6 @@ I2CSlave *create_pca9554(AspeedSoCState *soc, int bus_id, int addr)
TYPE_PCA9554, addr);
}
-#define TYPE_LM75 TYPE_TMP105
-#define TYPE_TMP75 TYPE_TMP105
-#define TYPE_TMP421 "tmp421"
-#define TYPE_DS1338 "ds1338"
-
-/* Catalina hardware value */
-#define CATALINA_BMC_HW_STRAP1 0x00002002
-#define CATALINA_BMC_HW_STRAP2 0x00000800
-
-#define CATALINA_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB)
-
-static void catalina_bmc_i2c_init(AspeedMachineState *bmc)
-{
- /* Reference from v6.16-rc2 aspeed-bmc-facebook-catalina.dts */
-
- AspeedSoCState *soc = bmc->soc;
- I2CBus *i2c[16] = {};
- I2CSlave *i2c_mux;
-
- /* busses 0-15 are all used. */
- for (int i = 0; i < ARRAY_SIZE(i2c); i++) {
- i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
- }
-
- /* &i2c0 */
- /* i2c-mux@71 (PCA9546) on i2c0 */
- i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x71);
-
- /* i2c-mux@72 (PCA9546) on i2c0 */
- i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x72);
-
- /* i2c0mux1ch1 */
- /* io_expander7 - pca9535@20 */
- i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1),
- TYPE_PCA9552, 0x20);
- /* eeprom@50 */
- at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB);
-
- /* i2c-mux@73 (PCA9546) on i2c0 */
- i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x73);
-
- /* i2c-mux@75 (PCA9546) on i2c0 */
- i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x75);
-
- /* i2c-mux@76 (PCA9546) on i2c0 */
- i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x76);
-
- /* i2c0mux4ch1 */
- /* io_expander8 - pca9535@21 */
- i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1),
- TYPE_PCA9552, 0x21);
- /* eeprom@50 */
- at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB);
-
- /* i2c-mux@77 (PCA9546) on i2c0 */
- i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x77);
-
-
- /* &i2c1 */
- /* i2c-mux@70 (PCA9548) on i2c1 */
- i2c_mux = i2c_slave_create_simple(i2c[1], TYPE_PCA9548, 0x70);
- /* i2c1mux0ch0 */
- /* ina238@41 - no model */
- /* ina238@42 - no model */
- /* ina238@44 - no model */
- /* i2c1mux0ch1 */
- /* ina238@41 - no model */
- /* ina238@43 - no model */
- /* i2c1mux0ch4 */
- /* ltc4287@42 - no model */
- /* ltc4287@43 - no model */
-
- /* i2c1mux0ch5 */
- /* eeprom@54 */
- at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 5), 0x54, 8 * KiB);
- /* tpm75@4f */
- i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 5), TYPE_TMP75, 0x4f);
-
- /* i2c1mux0ch6 */
- /* io_expander5 - pca9554@27 */
- i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6),
- TYPE_PCA9554, 0x27);
- /* io_expander6 - pca9555@25 */
- i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6),
- TYPE_PCA9552, 0x25);
- /* eeprom@51 */
- at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x51, 8 * KiB);
-
- /* i2c1mux0ch7 */
- /* eeprom@53 */
- at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 7), 0x53, 8 * KiB);
- /* temperature-sensor@4b - tmp75 */
- i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 7), TYPE_TMP75, 0x4b);
-
- /* &i2c2 */
- /* io_expander0 - pca9555@20 */
- i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x20);
- /* io_expander0 - pca9555@21 */
- i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x21);
- /* io_expander0 - pca9555@27 */
- i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x27);
- /* eeprom@50 */
- at24c_eeprom_init(i2c[2], 0x50, 8 * KiB);
- /* eeprom@51 */
- at24c_eeprom_init(i2c[2], 0x51, 8 * KiB);
-
- /* &i2c5 */
- /* i2c-mux@70 (PCA9548) on i2c5 */
- i2c_mux = i2c_slave_create_simple(i2c[5], TYPE_PCA9548, 0x70);
- /* i2c5mux0ch6 */
- /* eeprom@52 */
- at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x52, 8 * KiB);
- /* i2c5mux0ch7 */
- /* ina230@40 - no model */
- /* ina230@41 - no model */
- /* ina230@44 - no model */
- /* ina230@45 - no model */
-
- /* &i2c6 */
- /* io_expander3 - pca9555@21 */
- i2c_slave_create_simple(i2c[6], TYPE_PCA9552, 0x21);
- /* rtc@6f - nct3018y */
- i2c_slave_create_simple(i2c[6], TYPE_DS1338, 0x6f);
-
- /* &i2c9 */
- /* io_expander4 - pca9555@4f */
- i2c_slave_create_simple(i2c[9], TYPE_PCA9552, 0x4f);
- /* temperature-sensor@4b - tpm75 */
- i2c_slave_create_simple(i2c[9], TYPE_TMP75, 0x4b);
- /* eeprom@50 */
- at24c_eeprom_init(i2c[9], 0x50, 8 * KiB);
- /* eeprom@56 */
- at24c_eeprom_init(i2c[9], 0x56, 8 * KiB);
-
- /* &i2c10 */
- /* temperature-sensor@1f - tpm421 */
- i2c_slave_create_simple(i2c[10], TYPE_TMP421, 0x1f);
- /* eeprom@50 */
- at24c_eeprom_init(i2c[10], 0x50, 8 * KiB);
-
- /* &i2c11 */
- /* ssif-bmc@10 - no model */
-
- /* &i2c12 */
- /* eeprom@50 */
- at24c_eeprom_init(i2c[12], 0x50, 8 * KiB);
-
- /* &i2c13 */
- /* eeprom@50 */
- at24c_eeprom_init(i2c[13], 0x50, 8 * KiB);
- /* eeprom@54 */
- at24c_eeprom_init(i2c[13], 0x54, 256);
- /* eeprom@55 */
- at24c_eeprom_init(i2c[13], 0x55, 256);
- /* eeprom@57 */
- at24c_eeprom_init(i2c[13], 0x57, 256);
-
- /* &i2c14 */
- /* io_expander9 - pca9555@10 */
- i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x10);
- /* io_expander10 - pca9555@11 */
- i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x11);
- /* io_expander11 - pca9555@12 */
- i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x12);
- /* io_expander12 - pca9555@13 */
- i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x13);
- /* io_expander13 - pca9555@14 */
- i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x14);
- /* io_expander14 - pca9555@15 */
- i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x15);
-
- /* &i2c15 */
- /* temperature-sensor@1f - tmp421 */
- i2c_slave_create_simple(i2c[15], TYPE_TMP421, 0x1f);
- /* eeprom@52 */
- at24c_eeprom_init(i2c[15], 0x52, 8 * KiB);
-}
-
static bool aspeed_get_mmio_exec(Object *obj, Error **errp)
{
return ASPEED_MACHINE(obj)->mmio_exec;
@@ -650,26 +470,6 @@ static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc,
aspeed_machine_ast2600_class_emmc_init(oc);
};
-static void aspeed_machine_catalina_class_init(ObjectClass *oc,
- const void *data)
-{
- MachineClass *mc = MACHINE_CLASS(oc);
- AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
-
- mc->desc = "Facebook Catalina BMC (Cortex-A7)";
- amc->soc_name = "ast2600-a3";
- amc->hw_strap1 = CATALINA_BMC_HW_STRAP1;
- amc->hw_strap2 = CATALINA_BMC_HW_STRAP2;
- amc->fmc_model = "w25q01jvq";
- amc->spi_model = NULL;
- amc->num_cs = 2;
- amc->macs_mask = ASPEED_MAC2_ON;
- amc->i2c_init = catalina_bmc_i2c_init;
- mc->default_ram_size = CATALINA_BMC_RAM_SIZE;
- aspeed_machine_class_init_cpus_defaults(mc);
- aspeed_machine_ast2600_class_emmc_init(oc);
-}
-
#define AST1030_INTERNAL_FLASH_SIZE (1024 * 1024)
/* Main SYSCLK frequency in Hz (200MHz) */
#define SYSCLK_FRQ 200000000ULL
@@ -809,10 +609,6 @@ static const TypeInfo aspeed_machine_types[] = {
.name = MACHINE_TYPE_NAME("ast2600-evb"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_ast2600_evb_class_init,
- }, {
- .name = MACHINE_TYPE_NAME("catalina-bmc"),
- .parent = TYPE_ASPEED_MACHINE,
- .class_init = aspeed_machine_catalina_class_init,
}, {
.name = MACHINE_TYPE_NAME("ast1030-evb"),
.parent = TYPE_ASPEED_MACHINE,
diff --git a/hw/arm/aspeed_ast2600_catalina.c b/hw/arm/aspeed_ast2600_catalina.c
new file mode 100644
index 0000000000..5a44bf9122
--- /dev/null
+++ b/hw/arm/aspeed_ast2600_catalina.c
@@ -0,0 +1,224 @@
+/*
+ * Facebook Catalina
+ *
+ * Copyright (C) 2025 ASPEED Technology Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/arm/aspeed.h"
+#include "hw/arm/aspeed_soc.h"
+#include "hw/i2c/i2c_mux_pca954x.h"
+#include "hw/gpio/pca9552.h"
+#include "hw/gpio/pca9554.h"
+#include "hw/nvram/eeprom_at24c.h"
+#include "hw/sensor/tmp105.h"
+
+/* Catalina hardware value */
+#define CATALINA_BMC_HW_STRAP1 0x00002002
+#define CATALINA_BMC_HW_STRAP2 0x00000800
+#define CATALINA_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB)
+
+#define TYPE_TMP75 TYPE_TMP105
+#define TYPE_TMP421 "tmp421"
+#define TYPE_DS1338 "ds1338"
+
+static void catalina_bmc_i2c_init(AspeedMachineState *bmc)
+{
+ /* Reference from v6.16-rc2 aspeed-bmc-facebook-catalina.dts */
+
+ AspeedSoCState *soc = bmc->soc;
+ I2CBus *i2c[16] = {};
+ I2CSlave *i2c_mux;
+
+ /* busses 0-15 are all used. */
+ for (int i = 0; i < ARRAY_SIZE(i2c); i++) {
+ i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
+ }
+
+ /* &i2c0 */
+ /* i2c-mux@71 (PCA9546) on i2c0 */
+ i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x71);
+
+ /* i2c-mux@72 (PCA9546) on i2c0 */
+ i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x72);
+
+ /* i2c0mux1ch1 */
+ /* io_expander7 - pca9535@20 */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1),
+ TYPE_PCA9552, 0x20);
+ /* eeprom@50 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB);
+
+ /* i2c-mux@73 (PCA9546) on i2c0 */
+ i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x73);
+
+ /* i2c-mux@75 (PCA9546) on i2c0 */
+ i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x75);
+
+ /* i2c-mux@76 (PCA9546) on i2c0 */
+ i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x76);
+
+ /* i2c0mux4ch1 */
+ /* io_expander8 - pca9535@21 */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1),
+ TYPE_PCA9552, 0x21);
+ /* eeprom@50 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB);
+
+ /* i2c-mux@77 (PCA9546) on i2c0 */
+ i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x77);
+
+
+ /* &i2c1 */
+ /* i2c-mux@70 (PCA9548) on i2c1 */
+ i2c_mux = i2c_slave_create_simple(i2c[1], TYPE_PCA9548, 0x70);
+ /* i2c1mux0ch0 */
+ /* ina238@41 - no model */
+ /* ina238@42 - no model */
+ /* ina238@44 - no model */
+ /* i2c1mux0ch1 */
+ /* ina238@41 - no model */
+ /* ina238@43 - no model */
+ /* i2c1mux0ch4 */
+ /* ltc4287@42 - no model */
+ /* ltc4287@43 - no model */
+
+ /* i2c1mux0ch5 */
+ /* eeprom@54 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 5), 0x54, 8 * KiB);
+ /* tpm75@4f */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 5), TYPE_TMP75, 0x4f);
+
+ /* i2c1mux0ch6 */
+ /* io_expander5 - pca9554@27 */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6),
+ TYPE_PCA9554, 0x27);
+ /* io_expander6 - pca9555@25 */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6),
+ TYPE_PCA9552, 0x25);
+ /* eeprom@51 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x51, 8 * KiB);
+
+ /* i2c1mux0ch7 */
+ /* eeprom@53 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 7), 0x53, 8 * KiB);
+ /* temperature-sensor@4b - tmp75 */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 7), TYPE_TMP75, 0x4b);
+
+ /* &i2c2 */
+ /* io_expander0 - pca9555@20 */
+ i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x20);
+ /* io_expander0 - pca9555@21 */
+ i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x21);
+ /* io_expander0 - pca9555@27 */
+ i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x27);
+ /* eeprom@50 */
+ at24c_eeprom_init(i2c[2], 0x50, 8 * KiB);
+ /* eeprom@51 */
+ at24c_eeprom_init(i2c[2], 0x51, 8 * KiB);
+
+ /* &i2c5 */
+ /* i2c-mux@70 (PCA9548) on i2c5 */
+ i2c_mux = i2c_slave_create_simple(i2c[5], TYPE_PCA9548, 0x70);
+ /* i2c5mux0ch6 */
+ /* eeprom@52 */
+ at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x52, 8 * KiB);
+ /* i2c5mux0ch7 */
+ /* ina230@40 - no model */
+ /* ina230@41 - no model */
+ /* ina230@44 - no model */
+ /* ina230@45 - no model */
+
+ /* &i2c6 */
+ /* io_expander3 - pca9555@21 */
+ i2c_slave_create_simple(i2c[6], TYPE_PCA9552, 0x21);
+ /* rtc@6f - nct3018y */
+ i2c_slave_create_simple(i2c[6], TYPE_DS1338, 0x6f);
+
+ /* &i2c9 */
+ /* io_expander4 - pca9555@4f */
+ i2c_slave_create_simple(i2c[9], TYPE_PCA9552, 0x4f);
+ /* temperature-sensor@4b - tpm75 */
+ i2c_slave_create_simple(i2c[9], TYPE_TMP75, 0x4b);
+ /* eeprom@50 */
+ at24c_eeprom_init(i2c[9], 0x50, 8 * KiB);
+ /* eeprom@56 */
+ at24c_eeprom_init(i2c[9], 0x56, 8 * KiB);
+
+ /* &i2c10 */
+ /* temperature-sensor@1f - tpm421 */
+ i2c_slave_create_simple(i2c[10], TYPE_TMP421, 0x1f);
+ /* eeprom@50 */
+ at24c_eeprom_init(i2c[10], 0x50, 8 * KiB);
+
+ /* &i2c11 */
+ /* ssif-bmc@10 - no model */
+
+ /* &i2c12 */
+ /* eeprom@50 */
+ at24c_eeprom_init(i2c[12], 0x50, 8 * KiB);
+
+ /* &i2c13 */
+ /* eeprom@50 */
+ at24c_eeprom_init(i2c[13], 0x50, 8 * KiB);
+ /* eeprom@54 */
+ at24c_eeprom_init(i2c[13], 0x54, 256);
+ /* eeprom@55 */
+ at24c_eeprom_init(i2c[13], 0x55, 256);
+ /* eeprom@57 */
+ at24c_eeprom_init(i2c[13], 0x57, 256);
+
+ /* &i2c14 */
+ /* io_expander9 - pca9555@10 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x10);
+ /* io_expander10 - pca9555@11 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x11);
+ /* io_expander11 - pca9555@12 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x12);
+ /* io_expander12 - pca9555@13 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x13);
+ /* io_expander13 - pca9555@14 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x14);
+ /* io_expander14 - pca9555@15 */
+ i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x15);
+
+ /* &i2c15 */
+ /* temperature-sensor@1f - tmp421 */
+ i2c_slave_create_simple(i2c[15], TYPE_TMP421, 0x1f);
+ /* eeprom@52 */
+ at24c_eeprom_init(i2c[15], 0x52, 8 * KiB);
+}
+
+static void aspeed_machine_catalina_class_init(ObjectClass *oc,
+ const void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Facebook Catalina BMC (Cortex-A7)";
+ amc->soc_name = "ast2600-a3";
+ amc->hw_strap1 = CATALINA_BMC_HW_STRAP1;
+ amc->hw_strap2 = CATALINA_BMC_HW_STRAP2;
+ amc->fmc_model = "w25q01jvq";
+ amc->spi_model = NULL;
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC2_ON;
+ amc->i2c_init = catalina_bmc_i2c_init;
+ mc->default_ram_size = CATALINA_BMC_RAM_SIZE;
+ aspeed_machine_class_init_cpus_defaults(mc);
+ aspeed_machine_ast2600_class_emmc_init(oc);
+}
+
+static const TypeInfo aspeed_ast2600_catalina_types[] = {
+ {
+ .name = MACHINE_TYPE_NAME("catalina-bmc"),
+ .parent = TYPE_ASPEED_MACHINE,
+ .class_init = aspeed_machine_catalina_class_init,
+ },
+};
+
+DEFINE_TYPES(aspeed_ast2600_catalina_types)
+
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index e81dad1ac4..75d25626d1 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -58,6 +58,7 @@ arm_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
'aspeed_ast2500_yosemitev2.c',
'aspeed_ast2600.c',
'aspeed_ast2600_bletchley.c',
+ 'aspeed_ast2600_catalina.c',
'aspeed_ast2600_fby35.c',
'aspeed_ast2600_fuji.c',
'aspeed_ast2600_gb200nvl.c',
--
2.43.0
next prev parent reply other threads:[~2025-10-29 4:41 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-29 4:36 [PATCH v2 00/17] Split AST2400, AST2600, AST2700 and AST1030 SoC machines into separate source files for maintainability Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 01/17] hw/arm/aspeed: Split Quanta-Q71L machine into a separate source file " Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 02/17] hw/arm/aspeed: Split Supermicro X11 " Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 03/17] hw/arm/aspeed: Split Palmetto " Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 04/17] hw/arm/aspeed: Move ASPEED_RAM_SIZE() macro to common header for reuse Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 05/17] hw/arm/aspeed: Split Bletchley machine into a separate source file for maintainability Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 06/17] hw/arm/aspeed: Split FBY35 BMC " Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 07/17] hw/arm/aspeed: Split Fuji " Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 08/17] hw/arm/aspeed: Split QCOM Firework " Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 09/17] hw/arm/aspeed: Split QCOM DC-SCM V1 " Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 10/17] hw/arm/aspeed: Make aspeed_machine_ast2600_class_emmc_init() a common API for eMMC boot setup Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 11/17] hw/arm/aspeed: Split GB200NVL machine into a separate source file for maintainability Jamin Lin via
2025-10-29 4:36 ` [PATCH v2 12/17] hw/arm/aspeed: Split Rainier " Jamin Lin via
2025-10-29 4:36 ` Jamin Lin via [this message]
2025-10-29 4:37 ` [PATCH v2 14/17] hw/arm/aspeed: Split AST2600 EVB " Jamin Lin via
2025-10-29 4:37 ` [PATCH v2 15/17] hw/arm/aspeed: Split AST2700 " Jamin Lin via
2025-10-29 4:37 ` [PATCH v2 16/17] hw/arm/aspeed: Promote connect_serial_hds_to_uarts() to public machine API Jamin Lin via
2025-10-29 17:33 ` [SPAM] " Cédric Le Goater
2025-10-29 4:37 ` [PATCH v2 17/17] hw/arm/aspeed: Split AST1030 EVB machine into a separate source file for maintainability Jamin Lin via
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251029043710.1486573-14-jamin_lin@aspeedtech.com \
--to=qemu-devel@nongnu.org \
--cc=andrew@codeconstruct.com.au \
--cc=clg@kaod.org \
--cc=jamin_lin@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=kane_chen@aspeedtech.com \
--cc=leetroy@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).