[PATCH v3 2/2] hw/arm/imx8mp-evk: Fix guest time in KVM mode

[Bernhard Beschow <shentey@gmail.com>]

The imx8mp DTB hardcodes the clock frequency of the system counter to 8MHz.
In KVM mode, the host CPU is used whose system counter runs at a different
frequency, resulting in the guest clock running slower or faster. Fix this
by not hardcoding the clock frequency which makes the Linux driver read
the real clock frequency from the register.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
 hw/arm/imx8mp-evk.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/hw/arm/imx8mp-evk.c b/hw/arm/imx8mp-evk.c
index 3ddcf1af5a..44e0601967 100644
--- a/hw/arm/imx8mp-evk.c
+++ b/hw/arm/imx8mp-evk.c
@@ -44,6 +44,15 @@ static void imx8mp_evk_modify_dtb(const struct arm_boot_info *info, void *fdt)
         fdt_nop_property(fdt, offset, "cpu-idle-states");
         offset = fdt_node_offset_by_compatible(fdt, offset, "arm,cortex-a53");
     }
+
+    if (kvm_enabled()) {
+        /* Use system counter frequency from host CPU to fix time in guest */
+        offset = fdt_node_offset_by_compatible(fdt, -1, "arm,armv8-timer");
+        while (offset >= 0) {
+            fdt_nop_property(fdt, offset, "clock-frequency");
+            offset = fdt_node_offset_by_compatible(fdt, offset, "arm,armv8-timer");
+        }
+    }
 }
 
 static void imx8mp_evk_init(MachineState *machine)
-- 
2.51.2