From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Roman Bolshakov" <rbolshakov@ddn.com>,
"Alexander Graf" <agraf@csgraf.de>,
"Phil Dennis-Jordan" <phil@philjordan.eu>,
qemu-arm@nongnu.org, "Paolo Bonzini" <pbonzini@redhat.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Akihiko Odaki" <odaki@rsg.ci.i.u-tokyo.ac.jp>,
"Peter Collingbourne" <pcc@google.com>,
"Cameron Esfahani" <dirty@apple.com>,
"Mads Ynddal" <mads@ynddal.dk>,
"Mohamed Mediouni" <mohamed@unpredictable.fr>
Subject: [PATCH v4 13/23] accel/hvf: Implement WFI without using pselect()
Date: Mon, 3 Nov 2025 11:10:22 +0100 [thread overview]
Message-ID: <20251103101034.59039-14-philmd@linaro.org> (raw)
In-Reply-To: <20251103101034.59039-1-philmd@linaro.org>
Return to the main loop where we'll be waken again.
This avoid a tricky race with signals introduced in
commit 219c101fa7f ("Add HVF WFI handler").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
include/system/hvf_int.h | 1 -
accel/hvf/hvf-accel-ops.c | 3 --
target/arm/hvf/hvf.c | 74 +++------------------------------------
3 files changed, 5 insertions(+), 73 deletions(-)
diff --git a/include/system/hvf_int.h b/include/system/hvf_int.h
index d842d4b2b99..c8e407a1463 100644
--- a/include/system/hvf_int.h
+++ b/include/system/hvf_int.h
@@ -47,7 +47,6 @@ struct AccelCPUState {
#ifdef __aarch64__
hv_vcpu_exit_t *exit;
bool vtimer_masked;
- sigset_t unblock_ipi_mask;
bool guest_debug_enabled;
#endif
};
diff --git a/accel/hvf/hvf-accel-ops.c b/accel/hvf/hvf-accel-ops.c
index bbb0b385fe9..5922eb02e70 100644
--- a/accel/hvf/hvf-accel-ops.c
+++ b/accel/hvf/hvf-accel-ops.c
@@ -134,9 +134,6 @@ static int hvf_init_vcpu(CPUState *cpu)
sigact.sa_handler = dummy_signal;
sigaction(SIG_IPI, &sigact, NULL);
- pthread_sigmask(SIG_BLOCK, NULL, &cpu->accel->unblock_ipi_mask);
- sigdelset(&cpu->accel->unblock_ipi_mask, SIG_IPI);
-
#ifdef __aarch64__
r = hv_vcpu_create(&cpu->accel->fd,
(hv_vcpu_exit_t **)&cpu->accel->exit, NULL);
diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c
index 5e46e8bf4dd..51fd8c7175b 100644
--- a/target/arm/hvf/hvf.c
+++ b/target/arm/hvf/hvf.c
@@ -301,7 +301,7 @@ void hvf_arm_init_debug(void)
#define TMR_CTL_IMASK (1 << 1)
#define TMR_CTL_ISTATUS (1 << 2)
-static void hvf_wfi(CPUState *cpu);
+static int hvf_wfi(CPUState *cpu);
static uint32_t chosen_ipa_bit_size;
@@ -1703,81 +1703,17 @@ static uint64_t hvf_vtimer_val_raw(void)
return mach_absolute_time() - hvf_state->vtimer_offset;
}
-static uint64_t hvf_vtimer_val(void)
+static int hvf_wfi(CPUState *cpu)
{
- if (!runstate_is_running()) {
- /* VM is paused, the vtimer value is in vtimer.vtimer_val */
- return vtimer.vtimer_val;
- }
-
- return hvf_vtimer_val_raw();
-}
-
-static void hvf_wait_for_ipi(CPUState *cpu, struct timespec *ts)
-{
- /*
- * Use pselect to sleep so that other threads can IPI us while we're
- * sleeping.
- */
- qatomic_set_mb(&cpu->thread_kicked, false);
- bql_unlock();
- pselect(0, 0, 0, 0, ts, &cpu->accel->unblock_ipi_mask);
- bql_lock();
-}
-
-static void hvf_wfi(CPUState *cpu)
-{
- ARMCPU *arm_cpu = ARM_CPU(cpu);
- struct timespec ts;
- hv_return_t r;
- uint64_t ctl;
- uint64_t cval;
- int64_t ticks_to_sleep;
- uint64_t seconds;
- uint64_t nanos;
- uint32_t cntfrq;
-
if (cpu_has_work(cpu)) {
/*
* Don't bother to go into our "low power state" if
* we would just wake up immediately.
*/
- return;
+ return 0;
}
- r = hv_vcpu_get_sys_reg(cpu->accel->fd, HV_SYS_REG_CNTV_CTL_EL0, &ctl);
- assert_hvf_ok(r);
-
- if (!(ctl & 1) || (ctl & 2)) {
- /* Timer disabled or masked, just wait for an IPI. */
- hvf_wait_for_ipi(cpu, NULL);
- return;
- }
-
- r = hv_vcpu_get_sys_reg(cpu->accel->fd, HV_SYS_REG_CNTV_CVAL_EL0, &cval);
- assert_hvf_ok(r);
-
- ticks_to_sleep = cval - hvf_vtimer_val();
- if (ticks_to_sleep < 0) {
- return;
- }
-
- cntfrq = gt_cntfrq_period_ns(arm_cpu);
- seconds = muldiv64(ticks_to_sleep, cntfrq, NANOSECONDS_PER_SECOND);
- ticks_to_sleep -= muldiv64(seconds, NANOSECONDS_PER_SECOND, cntfrq);
- nanos = ticks_to_sleep * cntfrq;
-
- /*
- * Don't sleep for less than the time a context switch would take,
- * so that we can satisfy fast timer requests on the same CPU.
- * Measurements on M1 show the sweet spot to be ~2ms.
- */
- if (!seconds && nanos < (2 * SCALE_MS)) {
- return;
- }
-
- ts = (struct timespec) { seconds, nanos };
- hvf_wait_for_ipi(cpu, &ts);
+ return EXCP_HLT;
}
/* Must be called by the owning thread */
@@ -1967,7 +1903,7 @@ static int hvf_handle_exception(CPUState *cpu, hv_vcpu_exit_exception_t *excp)
case EC_WFX_TRAP:
advance_pc = true;
if (!(syndrome & WFX_IS_WFE)) {
- hvf_wfi(cpu);
+ ret = hvf_wfi(cpu);
}
break;
case EC_AA64_HVC:
--
2.51.0
next prev parent reply other threads:[~2025-11-03 10:19 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-03 10:10 [PATCH v4 00/23] target/arm/hvf: Consolidate Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 01/23] accel/hvf: Create hvf_protect_clean_range, hvf_unprotect_dirty_range Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 02/23] target/i386/hvf: Use host page alignment in ept_emulation_fault() Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 03/23] accel/hvf: Enforce host alignment in hv_vm_protect() Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 04/23] target/i386/hvf: Use hvf_unprotect_dirty_range Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 05/23] target/i386/hvf: Use address_space_translate in ept_emulation_fault Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 06/23] accel/hvf: Simplify hvf_log_* Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 07/23] accel/hvf: Move hvf_log_sync to hvf_log_clear Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 08/23] accel/hvf: Simplify hvf_set_phys_mem Philippe Mathieu-Daudé
2025-11-03 11:59 ` Akihiko Odaki
2025-11-03 10:10 ` [PATCH v4 09/23] accel/hvf: Drop hvf_slot and hvf_find_overlap_slot Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 10/23] accel/hvf: Remove mac_slots Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 11/23] target/arm/hvf: Implement dirty page tracking Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 12/23] accel/hvf: Skip WFI if CPU has work to do Philippe Mathieu-Daudé
2025-11-03 10:10 ` Philippe Mathieu-Daudé [this message]
2025-11-03 12:17 ` [PATCH v4 13/23] accel/hvf: Implement WFI without using pselect() Akihiko Odaki
2025-11-03 10:10 ` [PATCH v4 14/23] accel/hvf: Have PSCI CPU_SUSPEND halt the vCPU Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 15/23] accel: Introduce AccelOpsClass::cpu_target_realize() hook Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 16/23] accel/hvf: Add hvf_arch_cpu_realize() stubs Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 17/23] target/arm: Create GTimers *after* features finalized / accel realized Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 18/23] target/arm/hvf: Really set Generic Timer counter frequency Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 19/23] target/arm: Only allow disabling NEON when using TCG Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 20/23] accel/hvf: Introduce hvf_arch_cpu_synchronize_[pre/post]exec() hooks Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 21/23] target/i386/hvf: Flush vCPU registers once before vcpu_exec() loop Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 22/23] target/arm/hvf: " Philippe Mathieu-Daudé
2025-11-03 10:10 ` [PATCH v4 23/23] accel/hvf: Sync CNTV_CTL_EL0 & CNTV_CVAL_EL0 Philippe Mathieu-Daudé
2025-11-03 12:45 ` Akihiko Odaki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251103101034.59039-14-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=agraf@csgraf.de \
--cc=dirty@apple.com \
--cc=mads@ynddal.dk \
--cc=mohamed@unpredictable.fr \
--cc=odaki@rsg.ci.i.u-tokyo.ac.jp \
--cc=pbonzini@redhat.com \
--cc=pcc@google.com \
--cc=peter.maydell@linaro.org \
--cc=phil@philjordan.eu \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=rbolshakov@ddn.com \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).