From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [PULL 15/27] block/io_uring: use non-vectored read/write when possible
Date: Tue, 4 Nov 2025 18:54:03 +0100 [thread overview]
Message-ID: <20251104175415.525388-16-kwolf@redhat.com> (raw)
In-Reply-To: <20251104175415.525388-1-kwolf@redhat.com>
From: Stefan Hajnoczi <stefanha@redhat.com>
The io_uring_prep_readv2/writev2() man pages recommend using the
non-vectored read/write operations when possible for performance
reasons.
I didn't measure a significant difference but it doesn't hurt to have
this optimization in place.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20251104022933.618123-16-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/io_uring.c | 34 ++++++++++++++++++++++++++--------
1 file changed, 26 insertions(+), 8 deletions(-)
diff --git a/block/io_uring.c b/block/io_uring.c
index dd930ee57e..f1514cf024 100644
--- a/block/io_uring.c
+++ b/block/io_uring.c
@@ -46,17 +46,28 @@ static void luring_prep_sqe(struct io_uring_sqe *sqe, void *opaque)
switch (req->type) {
case QEMU_AIO_WRITE:
-#ifdef HAVE_IO_URING_PREP_WRITEV2
{
int luring_flags = (flags & BDRV_REQ_FUA) ? RWF_DSYNC : 0;
- io_uring_prep_writev2(sqe, fd, qiov->iov,
- qiov->niov, offset, luring_flags);
- }
+ if (luring_flags != 0 || qiov->niov > 1) {
+#ifdef HAVE_IO_URING_PREP_WRITEV2
+ io_uring_prep_writev2(sqe, fd, qiov->iov,
+ qiov->niov, offset, luring_flags);
#else
- assert(flags == 0);
- io_uring_prep_writev(sqe, fd, qiov->iov, qiov->niov, offset);
+ /*
+ * FUA should only be enabled with HAVE_IO_URING_PREP_WRITEV2, see
+ * luring_has_fua().
+ */
+ assert(luring_flags == 0);
+
+ io_uring_prep_writev(sqe, fd, qiov->iov, qiov->niov, offset);
#endif
+ } else {
+ /* The man page says non-vectored is faster than vectored */
+ struct iovec *iov = qiov->iov;
+ io_uring_prep_write(sqe, fd, iov->iov_base, iov->iov_len, offset);
+ }
break;
+ }
case QEMU_AIO_ZONE_APPEND:
io_uring_prep_writev(sqe, fd, qiov->iov, qiov->niov, offset);
break;
@@ -65,8 +76,15 @@ static void luring_prep_sqe(struct io_uring_sqe *sqe, void *opaque)
if (req->resubmit_qiov.iov != NULL) {
qiov = &req->resubmit_qiov;
}
- io_uring_prep_readv(sqe, fd, qiov->iov, qiov->niov,
- offset + req->total_read);
+ if (qiov->niov > 1) {
+ io_uring_prep_readv(sqe, fd, qiov->iov, qiov->niov,
+ offset + req->total_read);
+ } else {
+ /* The man page says non-vectored is faster than vectored */
+ struct iovec *iov = qiov->iov;
+ io_uring_prep_read(sqe, fd, iov->iov_base, iov->iov_len,
+ offset + req->total_read);
+ }
break;
}
case QEMU_AIO_FLUSH:
--
2.51.1
next prev parent reply other threads:[~2025-11-04 17:57 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-04 17:53 [PULL 00/27] Block layer patches Kevin Wolf
2025-11-04 17:53 ` [PULL 01/27] aio-posix: fix race between io_uring CQE and AioHandler deletion Kevin Wolf
2025-11-04 17:53 ` [PULL 02/27] aio-posix: fix fdmon-io_uring.c timeout stack variable lifetime Kevin Wolf
2025-11-04 17:53 ` [PULL 03/27] aio-posix: fix spurious return from ->wait() due to signals Kevin Wolf
2025-11-04 17:53 ` [PULL 04/27] aio-posix: keep polling enabled with fdmon-io_uring.c Kevin Wolf
2025-11-04 17:53 ` [PULL 05/27] tests/unit: skip test-nested-aio-poll with io_uring Kevin Wolf
2025-11-04 17:53 ` [PULL 06/27] aio-posix: integrate fdmon into glib event loop Kevin Wolf
2025-11-05 15:06 ` Richard Henderson
2025-11-11 21:40 ` Kevin Wolf
2025-11-04 17:53 ` [PULL 07/27] aio: remove aio_context_use_g_source() Kevin Wolf
2025-11-04 17:53 ` [PULL 08/27] aio: free AioContext when aio_context_new() fails Kevin Wolf
2025-11-04 17:53 ` [PULL 09/27] aio: add errp argument to aio_context_setup() Kevin Wolf
2025-11-04 17:53 ` [PULL 10/27] aio-posix: gracefully handle io_uring_queue_init() failure Kevin Wolf
2025-11-04 17:53 ` [PULL 11/27] aio-posix: unindent fdmon_io_uring_destroy() Kevin Wolf
2025-11-04 17:54 ` [PULL 12/27] aio-posix: add fdmon_ops->dispatch() Kevin Wolf
2025-11-04 17:54 ` [PULL 13/27] aio-posix: add aio_add_sqe() API for user-defined io_uring requests Kevin Wolf
2025-11-04 17:54 ` [PULL 14/27] block/io_uring: use aio_add_sqe() Kevin Wolf
2025-11-04 17:54 ` Kevin Wolf [this message]
2025-11-04 17:54 ` [PULL 16/27] block: replace TABs with space Kevin Wolf
2025-11-04 17:54 ` [PULL 17/27] block: Drop detach_subchain for bdrv_replace_node Kevin Wolf
2025-11-04 17:54 ` [PULL 18/27] iotests: Test resizing file node under raw with size/offset Kevin Wolf
2025-11-04 17:54 ` [PULL 19/27] qemu-img: Fix amend option parse error handling Kevin Wolf
2025-11-04 17:54 ` [PULL 20/27] iotests: Run iotests with sanitizers Kevin Wolf
2025-11-04 17:54 ` [PULL 21/27] qcow2: rename update_refcount_discard to queue_discard Kevin Wolf
2025-11-04 17:54 ` [PULL 22/27] qcow2: put discards in discard queue when discard-no-unref is enabled Kevin Wolf
2025-11-04 17:54 ` [PULL 23/27] tests/qemu-iotests/184: Fix skip message for qemu-img without throttle Kevin Wolf
2025-11-04 17:54 ` [PULL 24/27] tests/qemu-iotests: Improve the dry run list to speed up thorough testing Kevin Wolf
2025-11-04 17:54 ` [PULL 25/27] tests/qemu-iotest: Add more image formats to the " Kevin Wolf
2025-11-04 17:54 ` [PULL 26/27] block: Allow drivers to control protocol prefix at creation Kevin Wolf
2025-11-04 17:54 ` [PULL 27/27] qcow2, vmdk: Restrict creation with secondary file using protocol Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251104175415.525388-16-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).